diskimage-builder/bin/disk-image-create
Ben Nemec e49d347ba9 Generalize logic for skipping final image generation
Since the ironic-agent element builds the ramdisk and extracts the
kernel itself, there's no need to actually generate an image at the
end of the process.  Previously the unnecessary image was being
deleted, but this wastes a bunch of time compressing and converting
the image.  It's better to just not create the image at all.

This change adds a noop element called no-final-image that
disk-image-create looks for in the element list and, if found, will
cause it to skip the final image generation.  This is more flexible
than the previous ironic-agent-specific method that would have
required changes to disk-image-create for every element that wanted
to behave similarly.

Note that this cannot be done using an environment variable, because
element environments.d entries do not propagate out to
disk-image-create.  It also doesn't make sense as a user option
because it should be set by the element author, not the user.

Change-Id: I168feb18f0d578b3babbe4784d3ef75e755e1ebd
2016-07-28 13:14:36 -05:00

484 lines
19 KiB
Bash
Executable File

#!/bin/bash
#
# Copyright 2012 Hewlett-Packard Development Company, L.P.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
set -eE
# Prevent perl from complaining a lot, but also remove any unexpected side-effects
# of $LANG varying between build hosts
export LANG=C
# Store our initial environment and command line args for later
export DIB_ARGS="$@"
export DIB_ENV=$(export | grep ' DIB_.*=')
SCRIPTNAME=$(basename $0)
# this is a bit tricky to handle the case of being installed with "pip
# -e" (i.e. setuptools develop mode) and a regular install
#
# When installed normally, the scripts are installed into /usr/bin/
# and the other bits specified in "data_files" into
# /usr/share/diskimage-builder/[elements|lib|scripts] (if you're in a
# virtualenv, modulo all this with the right prefix-paths)
#
# When installed with -e, the scripts will still be installed into
# /usr/bin, but the data_files will *not* be installed. Because the
# "diskimage_builder" python module will be linked to the source repo
# (that's the idea of develop mode) what we can do is assume the
# following:
#
# - if the python module directory has a "bin" directory, then it must
# be the source repo and hence we have been installed via develop
# mode. Thus setup ourselves to use the scripts from the source
# repo.
#
# - otherwise, try to find libraires and elements have been installed
# into the system paths via a "normal" pip install
#
# - lastly, we might be running completely uninstalled.
# XXX : this might cause problems at some point; we might need to "cd"
# so python can find things, or use pip -e.
#
# This means if you want to develop your elements, then "pip -e" is
# the way to go ... your disk-image-create runs will be referencing
# the scripts from the editable source repo. But note that changes to
# anything in bin/ will *not* be applied; those files have been
# statically copied in during install. You'll need to iterate with
# another run of "pip install -e" if you're actually working on those
# bin/* scripts.
export SCRIPT_HOME=$(dirname $(readlink -f $0))
_DIB_PYTHON_INSTALL=$(python -c '
import inspect
import os
import sys
# this can fail if we are being run with pwd outside the source
# directory *and* have not been installed
try:
import diskimage_builder
except ImportError:
sys.exit(0)
print(os.path.dirname(inspect.getfile(diskimage_builder)))')
if [ -n "$_DIB_PYTHON_INSTALL" -a -d $_DIB_PYTHON_INSTALL/../bin ]; then
# we have been installed with "pip -e"
export SCRIPT_HOME=$_DIB_PYTHON_INSTALL/../bin
export _PREFIX=$SCRIPT_HOME/..
elif [ -d $SCRIPT_HOME/../share/diskimage-builder ]; then
# we have been installed in /usr
export _PREFIX=$SCRIPT_HOME/../share/diskimage-builder
else
# we have not been installed in any way
export _PREFIX=$SCRIPT_HOME/..
fi
export _LIB=$_PREFIX/lib
source $_LIB/die
IS_RAMDISK=0
if [ "$SCRIPTNAME" == "ramdisk-image-create" ]; then
IS_RAMDISK=1
fi
function show_options () {
echo "Usage: ${SCRIPTNAME} [OPTION]... [ELEMENT]..."
echo
echo "Options:"
echo " -a i386|amd64|armhf -- set the architecture of the image(default amd64)"
echo " -o imagename -- set the imagename of the output image file(default image)"
echo " -t qcow2,tar,vhd,docker,aci,raw -- set the image types of the output image files (default qcow2)"
echo " File types should be comma separated. VHD outputting requires the vhd-util"
echo " executable be in your PATH. ACI outputting requires the ACI_MANIFEST "
echo " environment variable be a path to a manifest file."
echo " -x -- turn on tracing (use -x -x for very detailed tracing)"
echo " -u -- uncompressed; do not compress the image - larger but faster"
echo " -c -- clear environment before starting work"
echo " --image-size size -- image size in GB for the created image"
echo " --image-cache directory -- location for cached images(default ~/.cache/image-create)"
echo " --max-online-resize size -- max number of filesystem blocks to support when resizing."
echo " Useful if you want a really large root partition when the image is deployed."
echo " Using a very large value may run into a known bug in resize2fs."
echo " Setting the value to 274877906944 will get you a 1PB root file system."
echo " Making this value unnecessarily large will consume extra disk space "
echo " on the root partition with extra file system inodes."
echo " --min-tmpfs size -- minimum size in GB needed in tmpfs to build the image"
echo " --mkfs-options -- option flags to be passed directly to mkfs."
echo " Options should be passed as a single string value."
echo " --no-tmpfs -- do not use tmpfs to speed image build"
echo " --offline -- do not update cached resources"
echo " --qemu-img-options -- option flags to be passed directly to qemu-img."
echo " Options need to be comma separated, and follow the key=value pattern."
echo " --root-label label -- label for the root filesystem. Defaults to 'cloudimg-rootfs'."
echo " --ramdisk-element -- specify the main element to be used for building ramdisks."
echo " Defaults to 'ramdisk'. Should be set to 'dracut-ramdisk' for platforms such"
echo " as RHEL and CentOS that do not package busybox."
echo " --install-type -- specify the default installation type. Defaults to 'source'. Set to 'package' to use package based installations by default."
echo " --docker-target -- specify the repo and tag to use if the output type is docker. Defaults to the value of output imagename"
if [ "$IS_RAMDISK" == "0" ]; then
echo " -n skip the default inclusion of the 'base' element"
echo " -p package[,package,package] -- list of packages to install in the image"
fi
echo " -h|--help -- display this help and exit"
echo " --version -- display version and exit"
echo
echo "ELEMENTS_PATH will allow you to specify multiple locations for the elements."
echo
echo "NOTE: At least one distribution root element must be specified."
echo
echo "NOTE: If using the VHD output format you need to have a patched version of vhd-util installed for the image"
echo " to be bootable. The patch is available here: https://github.com/emonty/vhd-util/blob/master/debian/patches/citrix"
echo " and a PPA with the patched tool is available here: https://launchpad.net/~openstack-ci-core/+archive/ubuntu/vhd-util"
echo
echo "Examples:"
if [ "$IS_RAMDISK" == "0" ]; then
echo " ${SCRIPTNAME} -a amd64 -o ubuntu-amd64 vm ubuntu"
echo " export ELEMENTS_PATH=~/source/tripleo-image-elements/elements"
echo " ${SCRIPTNAME} -a amd64 -o fedora-amd64-heat-cfntools vm fedora heat-cfntools"
else
echo " ${SCRIPTNAME} -a amd64 -o fedora-deploy deploy fedora"
echo " ${SCRIPTNAME} -a amd64 -o ubuntu-ramdisk ramdisk ubuntu"
fi
}
function show_version() {
if [ -n "$_DIB_PYTHON_INSTALL" ]; then
python -c "from diskimage_builder import version; print(version.version_info.version_string())"
else
echo "diskimage-builder is not installed."
fi
}
INSTALL_PACKAGES=""
IMAGE_TYPES=("qcow2")
COMPRESS_IMAGE="true"
export DIB_ROOT_LABEL=""
DIB_DEFAULT_INSTALLTYPE=${DIB_DEFAULT_INSTALLTYPE:-"source"}
MKFS_OPTS=""
ACI_MANIFEST=${ACI_MANIFEST:-}
DOCKER_TARGET=""
TEMP=`getopt -o a:ho:t:xucnp: -l no-tmpfs,offline,help,version,min-tmpfs:,image-size:,image-cache:,max-online-resize:,mkfs-options:,qemu-img-options:,ramdisk-element:,root-label:,install-type:,docker-target: -n $SCRIPTNAME -- "$@"`
if [ $? -ne 0 ] ; then echo "Terminating..." >&2 ; exit 1 ; fi
# Note the quotes around `$TEMP': they are essential!
eval set -- "$TEMP"
while true ; do
case "$1" in
-a) export ARCH=$2; shift 2 ;;
-o) export IMAGE_NAME=$2; shift 2 ;;
-t) IFS="," read -a IMAGE_TYPES <<< "$2"; export IMAGE_TYPES ; shift 2 ;;
-h|--help) show_options; exit 0;;
--version) show_version; exit 0;;
-x) shift; export DIB_DEBUG_TRACE=$(( $DIB_DEBUG_TRACE + 1 )); set -x;;
-u) shift; export COMPRESS_IMAGE="";;
-c) shift ; export CLEAR_ENV=1;;
-n) shift; export SKIP_BASE="1";;
-p) IFS="," read -a INSTALL_PACKAGES <<< "$2"; export INSTALL_PACKAGES ; shift 2 ;;
--image-size) export DIB_IMAGE_SIZE=$2; shift 2;;
--image-cache) export DIB_IMAGE_CACHE=$2; shift 2;;
--max-online-resize) export MAX_ONLINE_RESIZE=$2; shift 2;;
--mkfs-options) MKFS_OPTS=$2; shift 2;;
--min-tmpfs) export DIB_MIN_TMPFS=$2; shift 2;;
--no-tmpfs) shift; export DIB_NO_TMPFS=1;;
--offline) shift; export DIB_OFFLINE=1;;
--qemu-img-options) QEMU_IMG_OPTIONS=$2; shift 2;;
--root-label) export DIB_ROOT_LABEL=$2; shift 2;;
--ramdisk-element) RAMDISK_ELEMENT=$2; shift 2;;
--install-type) DIB_DEFAULT_INSTALLTYPE=$2; shift 2;;
--docker-target) export DOCKER_TARGET=$2; shift 2 ;;
--) shift ; break ;;
*) echo "Internal error!" ; exit 1 ;;
esac
done
export DIB_IMAGE_CACHE=${DIB_IMAGE_CACHE:-~/.cache/image-create}
mkdir -p $DIB_IMAGE_CACHE
if [ "$CLEAR_ENV" = "1" -a "$HOME" != "" ]; then
echo "Re-execing to clear environment."
echo "(note this will prevent much of the local_config element from working)"
exec -c $0 "$@"
fi
# Display the current file/function/line in the debug output
function _ps4 {
IFS=" " called=($(caller 0))
local f=$(readlink -f ${called[2]})
printf "%-80s " "$f:${called[1]}:${called[0]}"
}
export -f _ps4
export PS4='+ $(_ps4): '
source $_LIB/img-defaults
source $_LIB/common-functions
source $_LIB/img-functions
if [ "$IS_RAMDISK" == "1" ]; then
source $_LIB/ramdisk-defaults
source $_LIB/ramdisk-functions
fi
# If no elements are specified theres no way we can succeed
if [ -z "$*" ]; then
echo "ERROR: At least one distribution root element must be specified"
exit 1
fi
arg_to_elements "$@"
if [ "${#IMAGE_TYPES[@]}" = "1" ]; then
export IMAGE_NAME=${IMAGE_NAME%%\.${IMAGE_TYPES[0]}}
fi
# Check for required tools early on
for X in ${!IMAGE_TYPES[@]}; do
case "${IMAGE_TYPES[$X]}" in
qcow2)
if [ -z "$(which qemu-img)" ]; then
echo "qcow2 output format specified but qemu-img executable not found."
exit 1
fi
;;
vhd)
if [ -z "$(which vhd-util)" ]; then
echo "vhd output format specified but no vhd-util executable found."
exit 1
fi
;;
docker)
if [ -z "$(which docker)" ]; then
echo "docker output format specified but no docker executable found."
exit 1
fi
if [ -z "$DOCKER_TARGET" ]; then
echo "Please set --docker-target."
exit 1
fi
;;
esac
done
# NOTE: fstrim is on most all recent systems. It is provided by the util-linux
# package.
if [[ -z "$(which fstrim)" ]]; then
echo "fstrim utility is not found. This is provided by util-linux package"
echo "Please check your PATH variable is set correctly"
exit 1
fi
# NOTE: Tuning the rootfs uuid works only for ext filesystems.
# Rely on the below environment variable only for ext filesystems.
export DIB_IMAGE_ROOT_FS_UUID=$(uuidgen -r)
if echo "$FS_TYPE" | grep -q "^ext" && [ -z "${DIB_IMAGE_ROOT_FS_UUID}" ]; then
echo "ext filesystem detected but no DIB_IMAGE_ROOT_FS_UUID found."
echo "Is the uuidgen utility installed on your system?"
exit 1
fi
# FS_TYPE isn't available until after we source img-defaults
if [ -z "$DIB_ROOT_LABEL" ]; then
# NOTE(bnemec): XFS has a limit of 12 characters for filesystem labels
# Not changing the default for other filesystems to maintain backwards compatibility
if [ "$FS_TYPE" = "xfs" ]; then
DIB_ROOT_LABEL="img-rootfs"
else
DIB_ROOT_LABEL="cloudimg-rootfs"
fi
fi
# xattr support cannot be relied upon with tmpfs builds
# some kernels supoprt it, some don't
if [[ -n "${GENTOO_PROFILE}" ]]; then
if [[ "${GENTOO_PROFILE}" =~ "hardened" ]]; then
echo 'disabling tmpfs for gentoo hardened build'
export DIB_NO_TMPFS=1
fi
fi
mk_build_dir
create_base
# This variable needs to be propagated into the chroot
mkdir -p $TMP_HOOKS_PATH/environment.d
echo "export DIB_DEFAULT_INSTALLTYPE=\${DIB_DEFAULT_INSTALLTYPE:-\"${DIB_DEFAULT_INSTALLTYPE}\"}" > $TMP_HOOKS_PATH/environment.d/11-dib-install-type.bash
run_d extra-data
# Run pre-install scripts. These do things that prepare the chroot for package installs
run_d_in_target pre-install
do_extra_package_install
# Call install scripts to pull in the software users want.
run_d_in_target install
run_d_in_target post-install
# ensure we do not have a lost+found directory in the root folder
# that could cause copy to fail (it will be created again later
# when creating the file system, if it needs such directory)
if [ -e "$TMP_BUILD_DIR/mnt/lost+found" ]; then
sudo rm -rf "$TMP_BUILD_DIR/mnt/lost+found"
fi
# Free up /mnt
unmount_image
mv $TMP_BUILD_DIR/mnt $TMP_BUILD_DIR/built
# save xtrace state, as we want to turn it off to avoid spamming the
# logs with du output below.
xtrace=$(set +o | grep xtrace)
if [ -n "$DIB_IMAGE_SIZE" ]; then
du_size=$(echo "$DIB_IMAGE_SIZE" | awk '{printf("%d\n",$1 * 1024 *1024)}')
else
set +o xtrace
echo "Calculating image size (this may take a minute)..."
du_output=$(sudo du -a -c -x ${TMP_BUILD_DIR}/built)
# the last line is the total size from "-c".
# scale this by 0.6 to create a slightly bigger image
du_size=$(echo "$du_output" | tail -n1 | cut -f1 | \
awk '{print int($1 / 0.6)}')
$xtrace
fi
if [[ "${DIB_SHOW_IMAGE_USAGE:-0}" != 0 ]]; then
set +o xtrace
if [ -z "$du_output" ]; then
du_output=$(sudo du -a -c -x ${TMP_BUILD_DIR}/built)
fi
du_output_show="sort -nr |
numfmt --to=iec-i --padding=7
--suffix=B --field=1 --from-unit=1024"
# by default show the 10MiB and greater files & directories -- a
# dir with lots of little files will still show up, but this helps
# signal:noise ratio
if [[ ${DIB_SHOW_IMAGE_USAGE_FULL:-0} == 0 ]]; then
# numfmt will start giving a decimal place when < 10MiB
du_output_show+="| egrep 'MiB|GiB|TiB|PiB' | grep -v '\..MiB'"
echo "================================="
echo "Image size report (files > 10MiB)"
echo "================================="
else
echo "================="
echo "Image size report"
echo "================="
fi
eval ${du_output_show} <<< "$du_output"
echo
echo "===== end image size report ====="
echo
$xtrace
fi
if [ "$FS_TYPE" = "ext4" ] ; then
# Very conservative to handle images being resized a lot
# We set journal size to 64M so our journal is large enough when we
# perform an FS resize.
MKFS_OPTS="-i 4096 -J size=64 $MKFS_OPTS"
# Grow the image size to account for the journal, only if the user
# has not asked for a specific size.
if [ -z "$DIB_IMAGE_SIZE" ]; then
du_size=$(( $du_size + 65536 ))
fi
fi
# Rounding down size so that is is a multiple of 64, works around a bug in
# qemu-img that may occur when compressing raw images that aren't a multiple
# of 64k. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1180021
du_size=$(echo "$du_size" | awk ' { if ($1 % 64 != 0) print $1 + 64 - ( $1 % 64); else print $1; } ')
truncate -s${du_size}K $TMP_IMAGE_PATH
if [ -n "$MAX_ONLINE_RESIZE" ]; then
MKFS_OPTS="-E resize=$MAX_ONLINE_RESIZE $MKFS_OPTS"
fi
LOOPDEV=$(sudo losetup --show -f $TMP_IMAGE_PATH)
export EXTRA_UNMOUNT="detach_loopback $LOOPDEV"
export IMAGE_BLOCK_DEVICE=$LOOPDEV
eval_run_d block-device "IMAGE_BLOCK_DEVICE="
sudo mkfs $MKFS_OPTS -t $FS_TYPE -L ${DIB_ROOT_LABEL} ${IMAGE_BLOCK_DEVICE}
# Tuning the rootfs uuid works only for ext filesystems.
if echo "$FS_TYPE" | grep -q "^ext"; then
sudo tune2fs -U ${DIB_IMAGE_ROOT_FS_UUID} ${IMAGE_BLOCK_DEVICE}
fi
mkdir $TMP_BUILD_DIR/mnt
sudo mount ${IMAGE_BLOCK_DEVICE} $TMP_BUILD_DIR/mnt
sudo mv -t $TMP_BUILD_DIR/mnt ${TMP_BUILD_DIR}/built/*
mount_proc_dev_sys
run_d_in_target finalise
finalise_base
for X in ${!IMAGE_TYPES[@]} ; do
if [[ " tar aci " =~ "${IMAGE_TYPES[$X]}" ]]; then
if [ "${IMAGE_TYPES[$X]}" = "aci" ]; then
sudo tar -C ${TMP_BUILD_DIR}/mnt -cf $IMAGE_NAME.aci --exclude ./sys \
--exclude ./proc --xattrs --xattrs-include=\* \
--transform 's,^.,rootfs,S' .
if [ -n "$ACI_MANIFEST" ]; then
cp $ACI_MANIFEST ${TMP_BUILD_DIR}/manifest
sudo tar -C ${TMP_BUILD_DIR} --append -f $IMAGE_NAME.aci manifest
else
echo "No ACI_MANIFEST specified. An ACI_MANIFEST must be specified for"
echo " this image to be usable."
fi
else
sudo tar -C ${TMP_BUILD_DIR}/mnt -cf $IMAGE_NAME.tar --exclude ./sys \
--exclude ./proc --xattrs --xattrs-include=\* .
fi
sudo chown $USER: $IMAGE_NAME.${IMAGE_TYPES[$X]}
unset IMAGE_TYPES[$X]
elif [ "${IMAGE_TYPES[$X]}" == "docker" ]; then
sudo tar -C ${TMP_BUILD_DIR}/mnt -cf - --exclude ./sys \
--exclude ./proc --xattrs --xattrs-include=\* . \
| sudo docker import - $DOCKER_TARGET
unset IMAGE_TYPES[$X]
fi
done
if [[ ! $IMAGE_ELEMENT =~ no-final-image ]]; then
# Prep filesystem by discarding all unused space
fstrim_image
fi
# Unmount and cleanup the /mnt and /build subdirectories, to save
# space before converting the image to some other format.
unmount_image
cleanup_build_dir
if [[ (! $IMAGE_ELEMENT =~ no-final-image) && "$IS_RAMDISK" == "0" ]]; then
has_raw_type=
for IMAGE_TYPE in ${IMAGE_TYPES[@]} ; do
# We have to do raw last because it is destructive
if [ "$IMAGE_TYPE" = "raw" ]; then
has_raw_type=1
else
compress_and_save_image $IMAGE_NAME.$IMAGE_TYPE
fi
done
if [ -n "$has_raw_type" ]; then
IMAGE_TYPE="raw"
compress_and_save_image $IMAGE_NAME.$IMAGE_TYPE
fi
fi
# Remove the leftovers, i.e. the temporary image directory.
cleanup_image_dir
# All done!
trap EXIT