diskimage-builder/diskimage_builder/elements/bootloader/finalise.d/50-bootloader
Jesse Keating 84d10dce57 Remove use of 'which'.
Instead, either use the bash built-in of type to ensure it exists. Since
which is an external dep, things can fail oddly in a constrained
environment.

Also add a dib-lint test for this.

Change-Id: I645029f5b5bfe1198c89ce10fd3246be8636e8af
Signed-off-by: Jesse Keating <omgjlk@us.ibm.com>
2017-05-19 12:43:36 -07:00

195 lines
6.5 KiB
Bash
Executable File

#!/bin/bash
# Configure grub. Note that the various conditionals here are to handle
# different distributions gracefully.
if [ ${DIB_DEBUG_TRACE:-1} -gt 0 ]; then
set -x
fi
set -eu
set -o pipefail
PART_DEV=$IMAGE_BLOCK_DEVICE
BOOT_DEV=$IMAGE_BLOCK_DEVICE_WITHOUT_PART
function install_extlinux {
install-packages -m bootloader extlinux
echo "Installing Extlinux..."
# Find and install mbr.bin
for MBR in /usr/share/syslinux/mbr.bin /usr/lib/syslinux/mbr.bin \
/usr/lib/extlinux/mbr.bin /usr/lib/EXTLINUX/mbr.bin ; do
if [ -f $MBR ]; then
break
fi
done
if [ ! -f $MBR ]; then
echo "mbr.bin (from EXT/SYSLINUX) not found."
exit 1
fi
dd if=$MBR of=$BOOT_DEV
# Find any pre-created extlinux install directory
for EXTDIR in /boot/extlinux /boot/syslinux ; do
if [ -d $EXTDIR ] ; then
break
fi
done
if [ ! -d $EXTDIR ] ; then
# No install directory found so default to /boot/syslinux
EXTDIR=/boot/syslinux
mkdir -p $EXTDIR
fi
# Finally install extlinux
extlinux --install $EXTDIR
}
function install_grub2 {
# Check for offline installation of grub
if [ -f "/tmp/grub/install" ] ; then
source /tmp/grub/install
elif [[ "$ARCH" =~ "ppc" ]]; then
install-packages grub-ieee1275
else
install-packages -m bootloader grub-pc
fi
# XXX: grub-probe on the nbd0/loop0 device returns nothing - workaround, manually
# specify modules. https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1073731
GRUBNAME=$(type -p grub-install) || echo "trying grub2-install"
if [ -z "$GRUBNAME" ]; then
GRUBNAME=$(type -p grub2-install)
fi
# If no GRUB2 is found, fallback to extlinux
if [ -z "$GRUBNAME" ] || [ $($GRUBNAME --version | grep "0.97" | wc -l) -ne 0 ]; then
echo "No GRUB2 found. Fallback to Extlinux..."
install_extlinux
exit 0
fi
echo "Installing GRUB2..."
# We need --force so grub does not fail due to being installed on the
# root partition of a block device.
GRUB_OPTS=${GRUB_OPTS:-"--force"}
# XXX: This is buggy:
# - --target=i386-pc is invalid for non-i386/amd64 architectures
# - and for UEFI too.
# GRUB_OPTS="$GRUB_OPTS --target=i386-pc"
if [[ ! $GRUB_OPTS == *--target* ]] && [[ $($GRUBNAME --version) =~ ' 2.' ]]; then
# /sys/ comes from the host machine. If the host machine is using EFI
# but the image being built doesn't have EFI boot-images installed we
# should set the --target to use a BIOS-based boot-image.
#
# * --target tells grub what's the target platform
# * the boot images are placed in /usr/lib/grub/<cpu>-<platform>
# * i386-pc is used for BIOS-based machines
# http://www.gnu.org/software/grub/manual/grub.html#Installation
#
if [ -d /sys/firmware/efi ]; then
if [ ! -d /usr/lib/grub/*-efi ]; then
case $ARCH in
"x86_64"|"amd64")
GRUB_OPTS="$GRUB_OPTS --target=i386-pc"
;;
"i386")
target=i386-pc
if [ -e /proc/device-tree ]; then
for x in /proc/device-tree/*; do
if [ -e "$x" ]; then
target="i386-ieee1275"
fi
done
fi
GRUB_OPTS="$GRUB_OPTS --target=$target"
;;
esac
fi
fi
fi
if [[ "$ARCH" =~ "ppc" ]] ; then
$GRUBNAME --modules="part_msdos" $GRUB_OPTS $BOOT_DEV --no-nvram
else
$GRUBNAME --modules="biosdisk part_msdos" $GRUB_OPTS $BOOT_DEV
fi
# This might be better factored out into a per-distro 'install-bootblock'
# helper.
if [ -d /boot/grub2 ]; then
GRUB_CFG=/boot/grub2/grub.cfg
elif [ -d /boot/grub ]; then
GRUB_CFG=/boot/grub/grub.cfg
fi
# Override the root device to the default label, and disable uuid
# lookup.
echo "GRUB_DEVICE=LABEL=${DIB_ROOT_LABEL}" >> /etc/default/grub
echo 'GRUB_DISABLE_LINUX_UUID=true' >> /etc/default/grub
echo "GRUB_TIMEOUT=${DIB_GRUB_TIMEOUT:-5}" >>/etc/default/grub
echo 'GRUB_TERMINAL="serial console"' >>/etc/default/grub
echo 'GRUB_GFXPAYLOAD_LINUX=text' >>/etc/default/grub
echo 'GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=ttyS0,115200 no_timer_check"' >>/etc/default/grub
echo 'GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"' >>/etc/default/grub
if type grub2-mkconfig >/dev/null; then
GRUB_MKCONFIG="grub2-mkconfig -o $GRUB_CFG"
else
GRUB_MKCONFIG="grub-mkconfig -o $GRUB_CFG"
fi
DISTRO_NAME=${DISTRO_NAME:-}
case $DISTRO_NAME in
'ubuntu'|'debian')
sed -i -e "s/\(^GRUB_CMDLINE_LINUX.*\)\"$/\1 ${DIB_BOOTLOADER_DEFAULT_CMDLINE}\"/" /etc/default/grub
GRUB_MKCONFIG=update-grub
;;
'fedora'|'centos7'|'centos')
echo "GRUB_CMDLINE_LINUX=\"${DIB_BOOTLOADER_DEFAULT_CMDLINE}\"" >>/etc/default/grub
;;
'opensuse')
sed -i -e "s/\(^GRUB_CMDLINE_LINUX.*\)\"$/\1 ${DIB_BOOTLOADER_DEFAULT_CMDLINE}\"/" /etc/default/grub
;;
esac
# os-prober leaks /dev/sda into config file in dual-boot host
# Disable grub-os-prober to avoid the issue while running
# grub-mkconfig
# Setting a flag to track whether the entry is already there in grub config
PROBER_DISABLED=
if ! grep -qe "^\s*GRUB_DISABLE_OS_PROBER=true" /etc/default/grub; then
PROBER_DISABLED=true
echo 'GRUB_DISABLE_OS_PROBER=true' >> /etc/default/grub
fi
$GRUB_MKCONFIG
# Remove the fix to disable os_prober
if [ -n "$PROBER_DISABLED" ]; then
sed -i '$d' /etc/default/grub
fi
# grub-mkconfig generates a config with the device in it,
# This shouldn't be needed, but old code has bugs
DIB_RELEASE=${DIB_RELEASE:-}
if [ "$DIB_RELEASE" = 'precise' ] || [ "$DIB_RELEASE" = 'wheezy' ]; then
sed -i "s%search --no.*%%" $GRUB_CFG
sed -i "s%set root=.*%set root=(hd0,1)%" $GRUB_CFG
fi
# Fix efi specific instructions in grub config file
if [ -d /sys/firmware/efi ]; then
sed -i 's%\(initrd\|linux\)efi /boot%\1 /boot%g' $GRUB_CFG
fi
}
DIB_EXTLINUX=${DIB_EXTLINUX:-0}
if [ "$DIB_EXTLINUX" != "0" ]; then
install_extlinux
else
install_grub2
fi