26 lines
1.1 KiB
Bash
Executable file
26 lines
1.1 KiB
Bash
Executable file
#!/bin/bash
|
|
# Configure eth1, the baremetal network.
|
|
|
|
set -e
|
|
set -o xtrace
|
|
|
|
cat << EOF >> /etc/network/interfaces
|
|
|
|
auto eth1
|
|
iface eth1 inet static
|
|
# This matches the localrc we have configured for demo environments.
|
|
# It is unroutable and not suitable for production: it is a test network.
|
|
address 192.0.2.1
|
|
netmask 255.255.255.0
|
|
# Expose the metadata service needed by the nodes as they boot.
|
|
up iptables -t nat -A PREROUTING -d 169.254.169.254 -p tcp -m tcp --dport 80 -j REDIRECT --to-port 8775
|
|
# Grant access to the rest of the world by routing via the bootstrap node
|
|
# (libvirt rejects traffic from unknown ip addresses, meaning that using
|
|
# the default libvirt nat environment requires the MASQUERADE for the bare
|
|
# metal nodes unless you reconfigure libvirt as well). Alternatively you
|
|
# can create a second bridge on your machine and attached eth0 to that
|
|
# (with an appropriate static config (or dhcp on the bridge).
|
|
up iptables -t nat -A POSTROUTING -s 192.0.2.0/24 -o eth0 -j MASQUERADE
|
|
# This matches the client range defined in localrc.
|
|
up ip addr add 192.0.2.33/29 dev eth1
|
|
EOF
|