diskimage-builder/elements/simple-init/README.rst
Monty Taylor a33ddb89f1 Add element to process config-drive network info
If you don't want cloud-init, you may need to get a few things
from config-drive because you may be operating on a cloud with no DHCP.
In that case, simply reading some values from config-drive and writing
out either DHCP or static network info, in addition to grabbing ssh keys
is helpful. Both Infra and bifrost want this for their images.

Co-Authored-By: Gregory Haynes <greg@greghaynes.net>

Change-Id: I2746ed256b9783eab058b803130d3ccac484eaeb
2015-04-14 13:39:18 -04:00

36 lines
1.6 KiB
ReStructuredText

===========
simple-init
===========
Basic network and system configuration that can't be done until boot
Unfortunately, as much as we'd like to bake it in to an image, we can't
know in advance how many network devices will be present, nor if DHCP is
present in the host cloud. Additionally, in environments where cloud-init
is not used, there are a couple of small things, like mounting config-drive
and pulling ssh keys from it, that need to be done at boot time.
Autodetect network interfaces during boot and configure them
------------------------------------------------------------
The rationale for this is that we are likely to require multiple
network interfaces for use cases such as baremetal and there is no way
to know ahead of time which one is which, so we will simply run a
DHCP client on all interfaces with real MAC addresses (except lo) that
are visible on the first boot.
The script `/usr/local/sbin/simple-init.sh` will be called
early in each boot and will scan available network interfaces and
ensure they are configured properly before networking services are started.
Processing startup information from config-drive
------------------------------------------------
On most systems, the DHCP approach desribed above is fine. But in some clouds,
such as Rackspace Public cloud, there is no DHCP. Instead, there is static
network config via `config-drive`. `simple-init` will happily call
`glean` which will do nothing if static network information is
not there.
Finally, glean will handle ssh-keypair-injection from config
drive if cloud-init is not installed.