diskimage-builder/diskimage_builder/block_device/level1/partitioning.py
Yolanda Robla 9b75eda51a Introduce exec_sudo command
Add a new method in the block device library called
exec_sudo, so it can be reused.

This is a partial refactor of change
I592c0b1329409307197460cfa8fd69798013f1f8

Change-Id: Id621f6d029e1275a35c4fd3f19b57c8518076134
Co-Authored-By: Andreas Florath <andreas@florath.net>
2017-05-05 16:11:41 +02:00

296 lines
11 KiB
Python

# Copyright 2016 Andreas Florath (andreas@florath.net)
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
from diskimage_builder.block_device.blockdevicesetupexception \
import BlockDeviceSetupException
from diskimage_builder.block_device.level1.mbr import MBR
from diskimage_builder.block_device.plugin_base import PluginBase
from diskimage_builder.block_device.tree_config import TreeConfig
from diskimage_builder.block_device.utils import exec_sudo
from diskimage_builder.block_device.utils import parse_abs_size_spec
from diskimage_builder.block_device.utils import parse_rel_size_spec
from diskimage_builder.graph.digraph import Digraph
import logging
import os
logger = logging.getLogger(__name__)
class PartitionTreeConfig(object):
@staticmethod
def config_tree_to_digraph(config_key, config_value, pconfig, dconfig,
base_name, plugin_manager):
logger.debug("called [%s] [%s] [%s]"
% (config_key, config_value, base_name))
assert config_key == Partition.type_string
for partition in config_value:
name = partition['name']
nconfig = {'name': name}
for k, v in partition.items():
if k not in plugin_manager:
nconfig[k] = v
else:
plugin_manager[k].plugin \
.tree_config.config_tree_to_digraph(
k, v, dconfig, name, plugin_manager)
pconfig.append(nconfig)
logger.debug("finished [%s] [%s]" % (nconfig, dconfig))
class Partition(Digraph.Node):
type_string = "partitions"
tree_config = TreeConfig("partitions")
def __init__(self, name, flags, size, ptype, base, partitioning,
prev_partition):
Digraph.Node.__init__(self, name)
self.name = name
self.flags = flags
self.size = size
self.ptype = ptype
self.base = base
self.partitioning = partitioning
self.prev_partition = prev_partition
def __repr__(self):
return "<Partition [%s] on [%s] size [%s] prev [%s]>" \
% (self.name, self.base, self.size,
self.prev_partition.name if self.prev_partition else "UNSET")
def get_flags(self):
return self.flags
def get_size(self):
return self.size
def get_type(self):
return self.ptype
def insert_edges(self, dg):
bnode = dg.find(self.base)
assert bnode is not None
dg.create_edge(bnode, self)
if self.prev_partition is not None:
logger.debug("Insert edge [%s]" % self)
dg.create_edge(self.prev_partition, self)
def create(self, result, rollback):
self.partitioning.create(result, rollback)
def umount(self, state):
"""Partitioning does not need any umount task."""
pass
def cleanup(self, state):
"""Partitioning does not need any cleanup."""
pass
def delete(self, state):
"""Partitioning does not need any cleanup."""
pass
class PartitioningTreeConfig(object):
@staticmethod
def config_tree_to_digraph(config_key, config_value, dconfig,
default_base_name, plugin_manager):
logger.debug("called [%s] [%s] [%s]"
% (config_key, config_value, default_base_name))
assert config_key == "partitioning"
base_name = config_value['base'] if 'base' in config_value \
else default_base_name
nconfig = {'base': base_name}
for k, v in config_value.items():
if k != 'partitions':
nconfig[k] = v
else:
pconfig = []
PartitionTreeConfig.config_tree_to_digraph(
k, v, pconfig, dconfig, base_name, plugin_manager)
nconfig['partitions'] = pconfig
dconfig.append({config_key: nconfig})
logger.debug("finished new [%s] complete [%s]" % (nconfig, dconfig))
class Partitioning(PluginBase):
tree_config = PartitioningTreeConfig()
flag_boot = 1
flag_primary = 2
def __init__(self, config, default_config):
logger.debug("Creating Partitioning object; config [%s]" % config)
# Because using multiple partitions of one base is done
# within one object, there is the need to store a flag if the
# creation of the partitions was already done.
self.already_created = False
# Parameter check
if 'base' not in config:
self._config_error("Partitioning config needs 'base'")
self.base = config['base']
if 'label' not in config:
self._config_error("Partitioning config needs 'label'")
self.label = config['label']
if self.label not in ("mbr", ):
self._config_error("Label must be 'mbr'")
# It is VERY important to get the alignment correct. If this
# is not correct, the disk performance might be very poor.
# Example: In some tests a 'off by one' leads to a write
# performance of 30% compared to a correctly aligned
# partition.
# The problem for DIB is, that it cannot assume that the host
# system uses the same IO sizes as the target system,
# therefore here a fixed approach (as used in all modern
# systems with large disks) is used. The partitions are
# aligned to 1MiB (which are about 2048 times 512 bytes
# blocks)
self.align = 1024 * 1024 # 1MiB as default
if 'align' in config:
self.align = parse_abs_size_spec(config['align'])
if 'partitions' not in config:
self._config_error("Partitioning config needs 'partitions'")
self.partitions = []
prev_partition = None
for part_cfg in config['partitions']:
if 'name' not in part_cfg:
self.config_error("Missing 'name' in partition config")
part_name = part_cfg['name']
flags = set()
if 'flags' in part_cfg:
for f in part_cfg['flags']:
if f == 'boot':
flags.add(Partitioning.flag_boot)
elif f == 'primary':
flags.add(Partitioning.flag_primary)
else:
self._config_error("Unknown flag [%s] in "
"partitioning for [%s]"
% (f, part_name))
if 'size' not in part_cfg:
self._config_error("No 'size' in partition [%s]"
% part_name)
size = part_cfg['size']
ptype = int(part_cfg['type'], 16) if 'type' in part_cfg else 0x83
np = Partition(part_name, flags, size, ptype, self.base, self,
prev_partition)
self.partitions.append(np)
prev_partition = np
logger.debug(part_cfg)
def _config_error(self, msg):
logger.error(msg)
raise BlockDeviceSetupException(msg)
def _size_of_block_dev(self, dev):
with open(dev, "r") as fd:
fd.seek(0, 2)
return fd.tell()
def insert_nodes(self, dg):
for part in self.partitions:
logger.debug("Insert node [%s]" % part)
dg.add_node(part)
def _all_part_devices_exist(self, expected_part_devices):
for part_device in expected_part_devices:
logger.debug("Checking if partition device [%s] exists" %
part_device)
if not os.path.exists(part_device):
logger.info("Partition device [%s] does not exists"
% part_device)
return False
logger.debug("Partition already exists [%s]" % part_device)
return True
def _notify_os_of_partition_changes(self, device_path, partition_devices):
"""Notify of of partition table changes
There is the need to call some programs to inform the operating
system of partition tables changes.
These calls are highly distribution and version specific. Here
a couple of different methods are used to get the best result.
"""
exec_sudo(["partprobe", device_path])
exec_sudo(["udevadm", "settle"])
if self._all_part_devices_exist(partition_devices):
return
# If running inside Docker, make our nodes manually, because udev
# will not be working.
if os.path.exists("/.dockerenv"):
# kpartx cannot run in sync mode in docker.
exec_sudo(["kpartx", "-av", device_path])
exec_sudo(["dmsetup", "--noudevsync", "mknodes"])
return
exec_sudo(["kpartx", "-avs", device_path])
def create(self, result, rollback):
image_path = result['blockdev'][self.base]['image']
device_path = result['blockdev'][self.base]['device']
logger.info("Creating partition on [%s] [%s]" %
(self.base, image_path))
if self.already_created:
logger.info("Not creating the partitions a second time.")
return
assert self.label == 'mbr'
partition_devices = set()
disk_size = self._size_of_block_dev(image_path)
with MBR(image_path, disk_size, self.align) as part_impl:
for part_cfg in self.partitions:
part_name = part_cfg.get_name()
part_bootflag = Partitioning.flag_boot \
in part_cfg.get_flags()
part_primary = Partitioning.flag_primary \
in part_cfg.get_flags()
part_size = part_cfg.get_size()
part_free = part_impl.free()
part_type = part_cfg.get_type()
logger.debug("Not partitioned space [%d]" % part_free)
part_size = parse_rel_size_spec(part_size,
part_free)[1]
part_no \
= part_impl.add_partition(part_primary, part_bootflag,
part_size, part_type)
logger.debug("Create partition [%s] [%d]" %
(part_name, part_no))
partition_device_name = device_path + "p%d" % part_no
result['blockdev'][part_name] \
= {'device': partition_device_name}
partition_devices.add(partition_device_name)
self.already_created = True
self._notify_os_of_partition_changes(device_path, partition_devices)
return