sig_cloud/diskimage-builder
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a692673b90
diskimage-builder/doc/source/user_guide/building_an_image.rst
Steve Baker cb395e672b Document diskimage-builder command 
Change-Id: I607ecb4adee9cf2e2db98142fe5274f4c12f5ab0
2023-03-13 09:01:49 +13:00

792 lines
24 KiB
ReStructuredText
Raw Blame History

Building An Image
=================
Now that you have diskimage-builder properly :doc:`installed <installation>`
you can get started by building your first disk image.
VM Image
--------
Our first image is going to be a bootable vm image using one of the standard
supported distribution :doc:`elements <../elements>` (Ubuntu or Fedora).
The following command will start our image build (distro must be either
'ubuntu' or 'fedora'):
::
disk-image-create <distro> vm
This will create a qcow2 file 'image.qcow2' which can then be booted.
Images can also be defined with YAML and built with the `diskimage-builder`.
With an `image.yaml` file containing:
.. code-block:: yaml
- elements:
- <distro>
- vm
An image is built with:
::
diskimage-builder image.yaml
Run `diskimage-builder --help` full description of the YAML attributes supported.
Elements
--------
It is important to note that we are passing in a list of
:doc:`elements <../elements>` to disk-image-create in our above command. Elements
are how we decide what goes into our image and what modifications will be
performed.
Some elements provide a root filesystem, such as the ubuntu or fedora element
in our example above, which other elements modify to create our image. At least
one of these 'distro elements' must be specified when performing an image
build. It's worth pointing out that there are many distro elements (you can even
create your own), and even multiples for some of the distros. This is because
there are often multiple ways to install a distro which are very different.
For example: One distro element might use a cloud image while another uses
a package installation tool to build a root filesystem for the same distro.
Other elements modify our image in some way. The 'vm' element in our example
above ensures that our image has a bootloader properly installed. This is only
needed for certain use cases and certain output formats and therefore it is
not performed by default.
Output Formats
--------------
By default a qcow2 image is created by the disk-image-create command. Other
output formats may be specified using the `-t <format>` argument. Multiple
output formats can also be specified by comma separation. The supported output
formats are:
* qcow2
* tar
* tgz
* squashfs
* vhd
* docker
* raw
When building a tgz image, note that the `DIB_GZIP_BIN` environment variable
can be used to set the path of the gzip executable.
Disk Image Layout
-----------------
The disk image layout (like number of images, partitions, LVM, disk
encryption) is something which should be set up during the initial
image build: it is mostly not possible to change these things later
on.
There are currently two defaults:
* When using the ``vm`` element, an element that provides
``block-device`` should be included. Available ``block-device-*``
elements cover the common case of a single partition that fills up
the whole disk and used as root device. Currently there are MBR,
GPT and EFI versions. For example, to use a GPT disk you could
build with ::
disk-image-create -o output.qcow vm block-device-gpt ubuntu-minimal
Or with `diskimage-builder` YAML
.. code-block:: yaml
- imagename: output.qcow
elements: [vm, block-device-gpt, ubuntu-minimal]
* When not using the ``vm`` element a plain filesystem image, without
any partitioning, is created.
If you wish to customise the top-level ``block-device-default.yaml``
file from one of the ``block-device-*`` elements, set the environment
variable `DIB_BLOCK_DEVICE_CONFIG`. This variable must hold YAML
structured configuration data or be a ``file://`` URL reference to a
on-disk configuration file.
There are a lot of different options for the different levels. The
following sections describe each level in detail.
General Remarks
+++++++++++++++
In general each module that depends on another module has a `base`
element that points to the depending base. Also each module has a
`name` that can be used to reference the module.
Tree-Like vs. Complete Digraph Configuration
++++++++++++++++++++++++++++++++++++++++++++
The configuration is specified as a digraph_. Each module is a
node; a edge is the relation of the current element to its `base`.
Because the general digraph_ approach is somewhat complex when it comes
to write it down, the configuration can also be given as a tree_.
.. _digraph: https://en.wikipedia.org/wiki/Directed_graph
.. _tree: https://en.wikipedia.org/wiki/Tree_(graph_theory)
Example: The tree like notation
.. code-block:: yaml
mkfs:
name: root_fs
base: root_part
mount:
mount_point: /
is exactly the same as writing
.. code-block:: yaml
mkfs:
name: root_fs
base: root_part
mount:
name: mount_root_fs
base: root_fs
mount_point: /
Non existing `name` and `base` entries in the tree notation are
automatically generated: the `name` is the name of the base module
prepended by the type-name of the module itself; the `base` element is
automatically set to the parent node in the tree.
In mostly all cases the much simpler tree notation can be used.
Nevertheless there are some use cases when the more general digraph
notation is needed. Example: when there is the need to combine two or
more modules into one new, like combining a couple of physical volumes
into one volume group.
Tree and digraph notations can be mixed as needed in a configuration.
Limitations
+++++++++++
To provide an interface towards the existing elements, there are
currently three fixed keys used - which are not configurable:
* `root-label`: this is the label of the block device that is mounted at
`/`.
* `image-block-partition`: if there is a block device with the name
`root` this is used else the block device with the name `image0` is
used.
* `image-path`: the path of the image that contains the root file
system is taken from the `image0`.
Level 0
+++++++
Module: Local Loop
..................
This module generates a local image file and uses the loop device to
create a block device from it. The symbolic name for this module is
`local_loop`.
Configuration options:
name
(mandatory) The name of the image. This is used as the name for the
image in the file system and also as a symbolic name to be able to
reference this image (e.g. to create a partition table on this
disk).
size
(optional) The size of the disk. The size can be expressed using
unit names like TiB (1024^4 bytes) or GB (1000^3 bytes).
Examples: 2.5GiB, 12KB.
If the size is not specified here, the size as given to
disk-image-create (--image-size) or the automatically computed size
is used.
directory
(optional) The directory where the image is created.
Example:
.. code-block:: yaml
local_loop:
name: image0
local_loop:
name: data_image
size: 7.5GiB
directory: /var/tmp
This creates two image files and uses the loop device to use them as
block devices. One image file called `image0` is created with
default size in the default temp directory. The second image has the
size of 7.5GiB and is created in the `/var/tmp` folder.
Level 1
+++++++
Module: Partitioning
....................
This module generates partitions on existing block devices. This
means that it is possible to take any kind of block device (e.g. LVM,
encrypted, ...) and create partition information in it.
The symbolic name for this module is `partitioning`.
MBR
***
It is possible to create primary or logical partitions or a mix of
them. The numbering of the primary partitions will start at 1,
e.g. `/dev/vda1`; logical partitions will typically start
with `5`, e.g. `/dev/vda5` for the first partition, `/dev/vda6` for
the second and so on.
The number of logical partitions created by this module is theoretical
unlimited and it was tested with more than 1000 partitions inside one
block device. Nevertheless the Linux kernel and different tools (like
`parted`, `sfdisk`, `fdisk`) have some default maximum number of
partitions that they can handle. Please consult the documentation of
the appropriate software you plan to use and adapt the number of
partitions.
Partitions are created in the order they are configured. Primary
partitions - if needed - must be first in the list.
GPT
***
GPT partitioning requires the ``sgdisk`` tool to be available.
Options
*******
There are the following key / value pairs to define one partition
table:
base
(mandatory) The base device to create the partitions in.
label
(mandatory) Possible values: 'mbr', 'gpt'
Configure use of either the Master Boot Record (MBR) or GUID
Partition Table (GPT) formats
align
(optional - default value '1MiB'; MBR only)
Set the alignment of the partition. This must be a multiple of the
block size (i.e. 512 bytes). The default of 1MiB (~ 2048 * 512
bytes blocks) is the default for modern systems and known to
perform well on a wide range of targets. For each partition
there might be some space that is not used - which is `align` - 512
bytes. For the default of 1MiB exactly 1048064 bytes (= 1 MiB -
512 byte) are not used in the partition itself. Please note that
if a boot loader should be written to the disk or partition,
there is a need for some space. E.g. grub needs 63 * 512 byte
blocks between the MBR and the start of the partition data; this
means when grub will be installed, the `align` must be set at least
to 64 * 512 byte = 32 KiB.
partitions
(mandatory) A list of dictionaries. Each dictionary describes one
partition.
The following key / value pairs can be given for each partition:
name
(mandatory) The name of the partition. With the help of this name,
the partition can later be referenced, e.g. when creating a
file system.
flags
(optional) List of flags for the partition. Default: empty.
Possible values:
boot (MBR only)
Sets the boot flag for the partition
primary (MBR only)
Partition should be a primary partition. If not set a logical
partition will be created.
size
(mandatory) The size of the partition. The size can either be an
absolute number using units like `10GiB` or `1.75TB` or relative
(percentage) numbers: in the later case the size is calculated
based on the remaining free space.
type (optional)
The partition type stored in the MBR or GPT partition table entry.
For MBR the default value is '0x83' (Linux Default partition). Any valid one
byte hexadecimal value may be specified here.
For GPT the default value is '8300' (Linux Default partition). Any valid two
byte hexadecimal value may be specified here. Due to ``sgdisk`` leading '0x'
should not be used.
Example:
.. code-block:: yaml
- partitioning:
base: image0
label: mbr
partitions:
- name: part-01
flags: [ boot ]
size: 1GiB
- name: part-02
size: 100%
- partitioning:
base: data_image
label: mbr
partitions:
- name: data0
size: 33%
- name: data1
size: 50%
- name: data2
size: 100%
- partitioning:
base: gpt_image
label: gpt
partitions:
- name: ESP
type: EF00
size: 16MiB
- name: data1
size: 1GiB
- name: lvmdata
type: 8E00
size: 100%
On the `image0` two partitions are created. The size of the first is
1GiB, the second uses the remaining free space. On the `data_image`
three partitions are created: all are about 1/3 of the disk size. On
the `gpt_image` three partitions are created: 16MiB one for EFI
bootloader, 1GiB Linux filesystem one and rest of disk will be used
for LVM partition.
Module: LVM
...........
This module generates volumes on existing block devices. This means that it is
possible to take any previous created partition, and create volumes information
in it.
The symbolic name for this module is `lvm`.
There are the following key / value pairs to define one set of volumes:
pvs
(mandatory) A list of dictionaries. Each dictionary describes one
physical volume.
vgs
(mandatory) A list of dictionaries. Each dictionary describes one volume
group.
lvs
(mandatory) A list of dictionaries. Each dictionary describes one logical
volume.
The following key / value pairs can be given for each `pvs`:
name
(mandatory) The name of the physical volume. With the help of this
name, the physical volume can later be referenced, e.g. when creating
a volume group.
base
(mandatory) The name of the partition where the physical volume
needs to be created.
options
(optional) List of options for the physical volume. It can contain
any option supported by the `pvcreate` command.
The following key / value pairs can be given for each `vgs`:
name
(mandatory) The name of the volume group. With the help of this name,
the volume group can later be referenced, e.g. when creating a logical
volume.
base
(mandatory) The name(s) of the physical volumes where the volume groups
needs to be created. As a volume group can be created on one or more
physical volumes, this needs to be a list.
options
(optional) List of options for the volume group. It can contain any
option supported by the `vgcreate` command.
The following key / value pairs can be given for each `lvs`:
name
(mandatory) The name of the logical volume. With the help of this name,
the logical volume can later be referenced, e.g. when creating a
filesystem.
base
(mandatory) The name of the volume group where the logical volume
needs to be created.
size
(optional) The exact size of the volume to be created. It accepts the same
syntax as the -L flag of the `lvcreate` command.
extents
(optional) The relative size in extents of the volume to be created. It
accepts the same syntax as the -l flag of the `lvcreate` command.
Either size or extents need to be passed on the volume creation.
options
(optional) List of options for the logical volume. It can contain any
option supported by the `lvcreate` command.
type
(optional) When set to `thin-pool` a thin pool volume will be created. When
set to `thin` the thin volume will be backed by the thin pool named with the
`thin-pool` key.
thin-pool
(optional) Name of the thin pool to use for this thin volume.
Example:
.. code-block:: yaml
- lvm:
name: lvm
pvs:
- name: pv
options: ["--force"]
base: root
vgs:
- name: vg
base: ["pv"]
options: ["--force"]
lvs:
- name: lv_root
base: vg
size: 1800M
- name: lv_tmp
base: vg
size: 100M
- name: lv_var
base: vg
size: 500M
- name: lv_log
base: vg
size: 100M
- name: lv_audit
base: vg
size: 100M
- name: lv_home
base: vg
size: 200M
On the `root` partition a physical volume is created. On that physical
volume, a volume group is created. On top of this volume group, six logical
volumes are created.
Please note that in order to build images that are bootable using volumes,
your ramdisk image will need to have that support. If the image you are using
does not have it, you can add the needed modules and regenerate it, by
including the `dracut-regenerate` element when building it.
Level 2
+++++++
Module: Mkfs
............
This module creates file systems on the block device given as `base`.
The following key / value pairs can be given:
base
(mandatory) The name of the block device where the filesystem will
be created on.
name
(mandatory) The name of the partition. This can be used to
reference (e.g. mounting) the filesystem.
type
(mandatory) The type of the filesystem, like `ext4` or `xfs`.
label
(optional - defaults to the name)
The label of the filesystem. This can be used e.g. by grub or in
the fstab.
opts
(optional - defaults to empty list)
Options that will passed to the mkfs command.
uuid
(optional - no default / not used if not givem)
The UUID of the filesystem. Not all file systems might
support this. Currently there is support for `ext2`, `ext3`,
`ext4` and `xfs`.
Example:
.. code-block:: yaml
- mkfs:
name: mkfs_root
base: root
type: ext4
label: cloudimage-root
uuid: b733f302-0336-49c0-85f2-38ca109e8bdb
opts: "-i 16384"
Level 3
+++++++
Module: Mount
.............
This module mounts a filesystem. The options are:
base
(mandatory) The name of the filesystem that will be mounted.
name
(mandatory) The name of the mount point. This can be used for
reference the mount (e.g. creating the fstab).
mount_point
(mandatory) The mount point of the filesystem.
There is no need to list the mount points in the correct order: an
algorithm will automatically detect the mount order.
Example:
.. code-block:: yaml
- mount:
name: root_mnt
base: mkfs_root
mount_point: /
Level 4
+++++++
Module: fstab
.............
This module creates fstab entries. The following options exists. For
details please consult the fstab man page.
base
(mandatory) The name of the mount point that will be written to
fstab.
name
(mandatory) The name of the fstab entry. This can be used later on
as reference - and is currently unused.
options
(optional, defaults to `default`)
Special mount options can be given. This is used as the fourth
field in the fstab entry.
dump-freq
(optional, defaults to 0 - don't dump)
This is passed to dump to determine which filesystem should be
dumped. This is used as the fifth field in the fstab entry.
fsck-passno
(optional, defaults to 2)
Determines the order to run fsck. Please note that this should be
set to 1 for the root file system. This is used as the sixth field
in the fstab entry.
Example:
.. code-block:: yaml
- fstab:
name: var_log_fstab
base: var_log_mnt
options: nodev,nosuid
dump-freq: 2
Legacy global filesystem configuration
--------------------------------------
The ``disk-image-create`` tool has a number of historic global
disk-related command-line options which are maintained for backwards
compatibility. These options are merged as necessary by the
block-device layer into the active configuration. If you are using
more complicated block-device layouts with multiple partitions, you
may need to take into account the special behaviour described below.
The ``local_loop`` module will take it's default size from the
following arguments:
``--image-size``
The size of loopback device which the image will be generated in,
in gigabytes. If this is left unset, the size will be calculated
from the on-disk size of the image and then scaled up by a fixed
60% factor. Can also set ``DIB_IMAGE_SIZE``.
``--image-extra-size``
Extra space to add when automatically calculating image size, in
megabytes. This overrides the default 60% scale up as described
above for ``--image-size``. Can also set ``DIB_IMAGE_EXTRA_SIZE``.
The special node named ``mkfs_root`` is affected by the following;
this reflects that the standard layout has only a single root
partition so the options are, in effect, global for the default
configuration. Note that if you are using multiple partitions,
settings such as ``--mkfs-options`` will *not* apply to other
partitions.
The file-system type for the ``mkfs_root`` node is set by the
``FS_TYPE`` environment variable, and defaults to ``ext4``. ``xfs``
should also work. There is no command-line argument for this.
The following options also affect the ``mkfs_root`` node
configuration:
``--mkfs-options``
Options passed to mkfs when making the root partition. For
``ext4`` partitions, this by default sets a 4k byte-to-inode ratio
(see below) and a default journal size of 64MiB. Note
``--mkfs-options`` are options passed to the mfks *driver*
(i.e. ``mkfs.ext4``) rather than ``mkfs`` itself (i.e. arguments
come after the initial ``mkfs -t <fstype>`` argument). You also
need to be careful with quoting. Can also set ``MKFS_OPTS``.
By default, ``disk-image-create`` uses a 4k byte-to-inode ratio
when creating the filesystem in the image. This allows large
'whole-system' images to utilize several TB disks without
exhausting inodes. In contrast, when creating images intended for
tenant instances, this ratio consumes more disk space than an
end-user would expect (e.g. a 50GB root disk has 47GB available).
If the image is intended to run within a tens to hundrededs of
gigabyte disk, setting the byte-to-inode ratio to the ext4 default
of 16k will allow for more usable space on the instance. The
default can be overridden by passing ``'-i 16384'`` as a
``--mkfs-options`` argument.
``--mkfs-journal-size``
Only valid for ``FS_TYPE==ext4``. This value set the filesystem
journal size in MB; overriding the default of 64MiB. Note the
image size will be grown to fit the journal, unless
``DIB_IMAGE_SIZE`` is explicitly set. Can also set
``DIB_JOURNAL_SIZE``.
``--max-online-resize``
Only valid for ``FS_TYPE==ext4``; this value sets the maximum
filesystem blocks when resizing. Can also set
``MAX_ONLINE_RESIZE``.
``--root-label``
The file-system label specified when creating the root file system.
Defaults to ``cloudimg-rootfs`` for ``ext4`` and ``img-rootfs`` for
``xfs``. Can also set ``ROOT_LABEL``.
Speedups
--------
If you have 4GB of available physical RAM (as reported by /proc/meminfo
MemTotal), or more, diskimage-builder will create a tmpfs mount to build the
image in. This will improve image build time by building it in RAM.
By default, the tmpfs file system uses 50% of the available RAM.
Therefore, the RAM should be at least the double of the minimum tmpfs
size required.
For larger images, when no sufficient amount of RAM is available, tmpfs
can be disabled completely by passing --no-tmpfs to disk-image-create.
ramdisk-image-create builds a regular image and then within that image
creates ramdisk.
If tmpfs is not used, you will need enough room in /tmp to store two
uncompressed cloud images. If tmpfs is used, you would still need /tmp space
for one uncompressed cloud image and about 20% of that image for working files.
Nameservers
-----------
To ensure elements can access the network, ``disk-image-create``
replaces the ``/etc/resolv.conf`` within the chroot with a copy of the
host's file early in the image creation process.
The final ``/etc/resolv.conf`` can be controlled in a number of ways.
If, during the build, the ``/etc/resolv.conf`` file within the chroot
is replaced with a symlink, this will be retained in the final image
[1]_. If the file is marked immutable, it will also not be touched.
.. [1] This somewhat odd case was added for installation of the
``resolvconf`` package, which replaces ``/etc/resolv.conf``
with a symlink to it's version. Depending on its contents, and
what comes after the installation in the build, this mostly
works.
If you would like specific contents within the final
``/etc/resolv.conf`` you can place them into
``/etc/resolv.conf.ORIG`` during the build. As one of the final
steps, this file will be ``mv`` to ``/etc/resolv.conf``.
Chosing an Architecture
-----------------------
If needed you can specify an override the architecture selection by passing a
``-a`` argument like:
::
disk-image-create -a <arch> ...
Notes about PowerPC Architectures
+++++++++++++++++++++++++++++++++
PowerPC can operate in either Big or Little Endian mode. ``ppc64``
always refers to Big Endian operation. When running in little endian
mode it can be referred to as ``ppc64le`` or ``ppc64el``.
Typically ``ppc64el`` refers to a ``.deb`` based distribution
architecture, and ``ppc64le`` refers to a ``.rpm`` based distribution.
Regardless of the distribution the kernel architecture is always
``ppc64le``.
Notes about s390x (z Systems) Architecture
++++++++++++++++++++++++++++++++++++++++++
Images for s390x can only be build on s390x hosts. Trying to build
it with the architecture override on other architecture will
cause the build to fail.
Reference in New Issue View Git Blame Copy Permalink