diskimage-builder/elements/ramdisk/extra-data.d/scripts/d/init-func
Nicholas Randon d11c10fb6a Remove call to depmod in busybox
The version of depmod in busybox does not work if two versions of
the same kernel version are available, as search paths are not
honoured correctly.  However, we don't need to actually call
depmod as it's done during image building anyway.

Change-Id: Idd3cd5854e7c86e7ca1f2b0e50758d7db79ab6e7
Co-Author: matthew.gilliard@hp.com
Closes-bug: #1302856
2014-04-09 10:10:11 +01:00

267 lines
4.6 KiB
Plaintext
Executable File

# Copyright (c) 2012 NTT DOCOMO, INC.
# Copyright 2012 Hewlett-Packard Development Company, L.P.
#
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
function get_kernel_parameter() {
local name=$1
for i in `cat /proc/cmdline`; do
case "$i" in
${name}=*)
echo "${i#${name}=}"
return 0
;;
${name})
echo ""
return 0
;;
*)
;;
esac
done
echo ""
return 1
}
function string_contains() {
local string=$1
local word=$2
if [ "$string" != "${string/$word/}" ]; then
return 0
else
return 1
fi
}
function load_modules_by_udev() {
udevadm trigger --action=add
udevadm settle
}
function strip_dev() {
echo "$1" | sed -e 's:^/dev/::'
}
function prepend_dev() {
case "$1" in
/dev/*)
echo "$1"
;;
*)
echo "/dev/$1"
;;
esac
}
function whole_disk_name() {
local dev=`prepend_dev "$1"`
case "$dev" in
/dev/sd*|/dev/hd*|/dev/vd*)
echo "$dev" | sed -e 's/[0-9]*$//'
;;
/dev/cciss/*)
echo "$dev" | sed -e 's/p[0-9]*$//'
;;
*)
echo ""
return 1
;;
esac
}
function partition_name() {
local dev=`prepend_dev "$1"`
local part=$2
case "$dev" in
/dev/sd*|/dev/hd*|/dev/vd*)
echo "${dev}${part}"
;;
/dev/cciss/*)
echo "${dev}p${part}"
;;
*)
echo ""
return 1
;;
esac
}
function find_interface() {
local mac=$1
eth=`ifconfig -a | grep -i "$mac" | awk {' print $1 '} | head -n 1`
if [ -n "$eth" ]; then
echo "$eth"
return 0
else
return 1
fi
}
function set_mac() {
local dev=$1
local mac=$2
ip link set "$dev" address "$mac"
}
function swap_ifname() {
local dev=$1
local dev2=$2
if [ "$dev" = "$dev2" ]; then
return
fi
if ip link show "$dev2" >/dev/null; then
# dev2 exists
# swap device name
ip link set "$dev" name "_$dev"
ip link set "$dev2" name "$dev"
ip link set "_$dev" name "$dev2"
else
ip link set "$dev" name "$dev2"
fi
}
function partition_exists() {
local dev=$1
dev=`strip_dev "$dev"`
if tail -n +3 /proc/partitions | grep "$dev" >/dev/null; then
return 0
else
return 1
fi
}
function find_disk() {
local disks=$1
local dev
# find device
local OLD_IFS=$IFS
IFS=,
for i in $disks; do
dev=`whole_disk_name "$i"`
if partition_exists "$dev"; then
dev=`prepend_dev "$dev"`
break
fi
dev=""
done
IFS=$OLD_IFS
if [ -z "$dev" ]; then
return 1
fi
echo "$dev"
return 0
}
function check_tgtd_socket() {
echo -n "waiting for tgtd socket..."
if [ -e /var/run/tgtd.ipc_abstract_namespace.0 ]; then
echo "found"
return 0
else
echo "not found"
return 1
fi
}
wait_for(){
LOOPS=$1
SLEEPTIME=$2
shift ; shift
i=0
while [ $i -lt $LOOPS ] ; do
i=$((i + 1))
eval "$@" && return 0 || true
sleep $SLEEPTIME
done
return 1
}
function start_iscsi_target() {
local iqn=$1
local dev=$2
local cli=$3
# used by tgtd
mkdir -p /var/run
tgtd
wait_for 10 0.5 check_tgtd_socket
tgtadm --lld iscsi --mode target --op new --tid 1 --targetname "$iqn"
tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 1 --backing-store "$dev"
tgtadm --lld iscsi --mode target --op bind --tid 1 --initiator-address "$cli"
}
function stop_iscsi_target() {
tgtadm --lld iscsi --mode logicalunit --op delete --tid 1 --lun 1
tgtadm --lld iscsi --mode target --op delete --tid 1
killall tgtd
}
function troubleshoot() {
if [ "$TROUBLESHOOT" != 1 ]; then
_DO_TROUBLESHOOT=""
_t=0
echo -n "Troubleshooting required, press t to launch shell."
while [ $_t -lt 10 ]; do
read -n 1 -t 1 _DO_TROUBLESHOOT
_t=$(($_t + 1))
if [ "$_DO_TROUBLESHOOT" == "t" ]; then
export TROUBLESHOOT=1
break
fi
echo -n "."
done
echo ""
fi
if [ "$TROUBLESHOOT" == 1 ]; then
echo "Starting troubleshooting shell."
bash
fi
}
function safe_url_encode() {
local str=$1
local out=""
for (( i=0; i<${#str}; i++ )); do
c=${str:$i:1}
case $c in
[a-zA-Z0-9.-_] )
out+="$c"
;;
' ' )
out+="+"
;;
*)
#skip it
;;
esac
done
echo "$out"
}
function err_msg() {
message=$1
if [ -z "$FIRST_ERR_MSG" ]; then
FIRST_ERR_MSG=$(safe_url_encode "$message")
fi
echo "$message"
}