diff --git a/cloud/rocky-azure-base.ks b/cloud/rocky-azure-base.ks new file mode 100644 index 0000000..3cbb2f2 --- /dev/null +++ b/cloud/rocky-azure-base.ks @@ -0,0 +1,215 @@ +%include rocky-cloud-base.ks +%include rocky-cloud-parts-base.ks +%include rocky-cloud-azure-packages.ks + +bootloader --append="rootdelay=300 console=ttyS0 earlyprintk=ttyS0 no_timer_check crashkernel=auto net.ifnames=0" --location=mbr --timeout=1 + +%post --erroronfail +passwd -d root +passwd -l root + +# Attempting to force legacy BIOS boot if we boot from UEFI +# This was backported from our 9 kickstarts to address some issues. +if [ "$(arch)" = "x86_64" ]; then + dnf install grub2-pc-modules grub2-pc -y + grub2-install --target=i386-pc /dev/vda +fi + +# Ensure that the pmbr_boot flag is off +parted /dev/vda disk_set pmbr_boot off + +### +# Common Cloud Tweaks +### + +# setup systemd to boot to the right runlevel +rm -f /etc/systemd/system/default.target +ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target +echo . + +# remove linux-firmware as we're virt and it's half a gig +dnf -C -y remove linux-firmware + +# Remove firewalld; it is required to be present for install/image building. +# but we dont ship it in cloud +dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1" +dnf -C -y remove avahi\* +sed -i '/^#NAutoVTs=.*/ a\ +NAutoVTs=0' /etc/systemd/logind.conf + +echo "virtual-guest" > /etc/tuned/active_profile + +### +# Networking Changes +### + +# For cloud images, 'eth0' _is_ the predictable device name, since +# we don't want to be tied to specific virtual (!) hardware +rm -f /etc/udev/rules.d/70* +ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules + +# simple eth0 config, again not hard-coded to the build hardware +cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF +DEVICE=eth0 +ONBOOT=yes +BOOTPROTO=dhcp +TYPE=Ethernet +USERCTL=no +PEERDNS=yes +IPV6INIT=no +NM_CONTROLLED=yes +IPV4_DHCP_TIMEOUT=300 +EOF + +cat << EOF | tee -a /etc/NetworkManager/conf.d/dhcp-timeout.conf +# Configure dhcp timeout to 300s by default +[connection] +ipv4.dhcp-timeout=300 +EOF + + +cat > /etc/sysconfig/network << EOF +NETWORKING=yes +NOZEROCONF=yes +EOF + +# Remove build-time resolvers to fix #16948 +echo > /etc/resolv.conf + +# generic localhost names +cat > /etc/hosts << EOF +127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 +::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 + +EOF +echo . + + +### +# Services +### + +systemctl mask tmp.mount + +### +# azure +### +# Setup WALinux Agent +dnf -y install WALinuxAgent +systemctl enable waagent + +# Configure waagent for cloud-init +sed -i 's/Provisioning.UseCloudInit=n/Provisioning.UseCloudInit=y/g' /etc/waagent.conf +sed -i 's/Provisioning.Enabled=y/Provisioning.Enabled=n/g' /etc/waagent.conf + + + +# Azure: handle sr-iov and networkmanaeger +cat << EOF | tee -a /etc/udev/rules.d/68-azure-sriov-nm-unmanaged.rules +# Accelerated Networking on Azure exposes a new SRIOV interface to the VM. +# This interface is transparently bonded to the synthetic interface, +# so NetworkManager should just ignore any SRIOV interfaces. +SUBSYSTEM=="net", DRIVERS=="hv_pci", ACTION=="add", ENV{NM_UNMANAGED}="1" +EOF + +# Azure: Time sync for linux +## Setup udev rule for ptp_hyperv +cat << EOF | tee -a /etc/udev/rules.d/98-hyperv-ptp.rules +## See: https://docs.microsoft.com/en-us/azure/virtual-machines/linux/time-sync#check-for-ptp-clock-source +SUBSYSTEM=="ptp", ATTR{clock_name}=="hyperv", SYMLINK += "ptp_hyperv" +EOF + +# Configure chrony to use ptp_hyperv +cat << EOF | tee -a /etc/chrony.conf +# Setup hyperv PTP device as refclock +refclock PHC /dev/ptp_hyperv poll 3 dpoll -2 offset 0 stratum 2 +EOF + +# Azure: Blacklist modules +cat << EOF | tee -a /etc/modprobe.d/azure-blacklist.conf +blacklist amdgpu +blacklist nouveau +blacklist radeon +EOF + +# Azure: cloud-init customizations for Hyperv +cat << EOF | tee /etc/cloud/cloud.cfg.d/10-azure-kvp.cfg +# Enable logging to the Hyper-V kvp in Azure +reporting: + logging: + type: log + telemetry: + type: hyperv +EOF + +### +# Kernel and Drivers +### + +# Add drivers when building in VMWare, Vbox, or KVM (KVM) +cat << EOF | tee -a /etc/dracut.conf.d/80-azure.conf +add_drivers+=" hv_vmbus hv_netvsc hv_storvsc " +EOF + +dracut -f -v + +cat < /etc/sysconfig/kernel +# UPDATEDEFAULT specifies if new-kernel-pkg should make +# new kernels the default +UPDATEDEFAULT=yes + +# DEFAULTKERNEL specifies the default kernel package type +DEFAULTKERNEL=kernel +EOL + +# make sure firstboot doesn't start +echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot + +# rocky cloud user +echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers +sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg + +dnf clean all + +# XXX instance type markers - MUST match Rocky Infra expectation +echo 'azure' > /etc/yum/vars/infra + +# change dhcp client retry/timeouts to resolve #6866 + + +### +# Cleanup +### + +### +# Azure Cleanup +### +sudo rm -f /var/log/waagent.log +sudo cloud-init clean +waagent -force -deprovision+user + + +# Commont cleanup +rm -f ~/.bash_history +export HISTSIZE=0 + +rm -f /var/lib/systemd/random-seed +rm -rf /root/anaconda-ks.cfg +rm -rf /root/install.log +rm -rf /root/install.log.syslog +rm -rf /var/lib/yum/* +rm -rf /var/log/anaconda* +rm -rf /var/log/yum.log + +# Wipe machineid +cat /dev/null > /etc/machine-id + +# Fix selinux +touch /var/log/cron +touch /var/log/boot.log +mkdir -p /var/cache/yum +/usr/sbin/fixfiles -R -a restore + +true + +%end diff --git a/cloud/rocky-azure-lvm.ks b/cloud/rocky-azure-lvm.ks new file mode 100644 index 0000000..6b9000b --- /dev/null +++ b/cloud/rocky-azure-lvm.ks @@ -0,0 +1,215 @@ +%include rocky-cloud-base.ks +%include rocky-cloud-parts-lvm.ks +%include rocky-cloud-azure-packages.ks + +bootloader --append="rootdelay=300 console=ttyS0 earlyprintk=ttyS0 no_timer_check crashkernel=auto net.ifnames=0" --location=mbr --timeout=1 + +%post --erroronfail +passwd -d root +passwd -l root + +# Attempting to force legacy BIOS boot if we boot from UEFI +# This was backported from our 9 kickstarts to address some issues. +if [ "$(arch)" = "x86_64" ]; then + dnf install grub2-pc-modules grub2-pc -y + grub2-install --target=i386-pc /dev/vda +fi + +# Ensure that the pmbr_boot flag is off +parted /dev/vda disk_set pmbr_boot off + +### +# Common Cloud Tweaks +### + +# setup systemd to boot to the right runlevel +rm -f /etc/systemd/system/default.target +ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target +echo . + +# remove linux-firmware as we're virt and it's half a gig +dnf -C -y remove linux-firmware + +# Remove firewalld; it is required to be present for install/image building. +# but we dont ship it in cloud +dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1" +dnf -C -y remove avahi\* +sed -i '/^#NAutoVTs=.*/ a\ +NAutoVTs=0' /etc/systemd/logind.conf + +echo "virtual-guest" > /etc/tuned/active_profile + +### +# Networking Changes +### + +# For cloud images, 'eth0' _is_ the predictable device name, since +# we don't want to be tied to specific virtual (!) hardware +rm -f /etc/udev/rules.d/70* +ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules + +# simple eth0 config, again not hard-coded to the build hardware +cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF +DEVICE=eth0 +ONBOOT=yes +BOOTPROTO=dhcp +TYPE=Ethernet +USERCTL=no +PEERDNS=yes +IPV6INIT=no +NM_CONTROLLED=yes +IPV4_DHCP_TIMEOUT=300 +EOF + +cat << EOF | tee -a /etc/NetworkManager/conf.d/dhcp-timeout.conf +# Configure dhcp timeout to 300s by default +[connection] +ipv4.dhcp-timeout=300 +EOF + + +cat > /etc/sysconfig/network << EOF +NETWORKING=yes +NOZEROCONF=yes +EOF + +# Remove build-time resolvers to fix #16948 +echo > /etc/resolv.conf + +# generic localhost names +cat > /etc/hosts << EOF +127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 +::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 + +EOF +echo . + + +### +# Services +### + +systemctl mask tmp.mount + +### +# azure +### +# Setup WALinux Agent +dnf -y install WALinuxAgent +systemctl enable waagent + +# Configure waagent for cloud-init +sed -i 's/Provisioning.UseCloudInit=n/Provisioning.UseCloudInit=y/g' /etc/waagent.conf +sed -i 's/Provisioning.Enabled=y/Provisioning.Enabled=n/g' /etc/waagent.conf + + + +# Azure: handle sr-iov and networkmanaeger +cat << EOF | tee -a /etc/udev/rules.d/68-azure-sriov-nm-unmanaged.rules +# Accelerated Networking on Azure exposes a new SRIOV interface to the VM. +# This interface is transparently bonded to the synthetic interface, +# so NetworkManager should just ignore any SRIOV interfaces. +SUBSYSTEM=="net", DRIVERS=="hv_pci", ACTION=="add", ENV{NM_UNMANAGED}="1" +EOF + +# Azure: Time sync for linux +## Setup udev rule for ptp_hyperv +cat << EOF | tee -a /etc/udev/rules.d/98-hyperv-ptp.rules +## See: https://docs.microsoft.com/en-us/azure/virtual-machines/linux/time-sync#check-for-ptp-clock-source +SUBSYSTEM=="ptp", ATTR{clock_name}=="hyperv", SYMLINK += "ptp_hyperv" +EOF + +# Configure chrony to use ptp_hyperv +cat << EOF | tee -a /etc/chrony.conf +# Setup hyperv PTP device as refclock +refclock PHC /dev/ptp_hyperv poll 3 dpoll -2 offset 0 stratum 2 +EOF + +# Azure: Blacklist modules +cat << EOF | tee -a /etc/modprobe.d/azure-blacklist.conf +blacklist amdgpu +blacklist nouveau +blacklist radeon +EOF + +# Azure: cloud-init customizations for Hyperv +cat << EOF | tee /etc/cloud/cloud.cfg.d/10-azure-kvp.cfg +# Enable logging to the Hyper-V kvp in Azure +reporting: + logging: + type: log + telemetry: + type: hyperv +EOF + +### +# Kernel and Drivers +### + +# Add drivers when building in VMWare, Vbox, or KVM (KVM) +cat << EOF | tee -a /etc/dracut.conf.d/80-azure.conf +add_drivers+=" hv_vmbus hv_netvsc hv_storvsc " +EOF + +dracut -f -v + +cat < /etc/sysconfig/kernel +# UPDATEDEFAULT specifies if new-kernel-pkg should make +# new kernels the default +UPDATEDEFAULT=yes + +# DEFAULTKERNEL specifies the default kernel package type +DEFAULTKERNEL=kernel +EOL + +# make sure firstboot doesn't start +echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot + +# rocky cloud user +echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers +sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg + +dnf clean all + +# XXX instance type markers - MUST match Rocky Infra expectation +echo 'azure' > /etc/yum/vars/infra + +# change dhcp client retry/timeouts to resolve #6866 + + +### +# Cleanup +### + +### +# Azure Cleanup +### +sudo rm -f /var/log/waagent.log +sudo cloud-init clean +waagent -force -deprovision+user + + +# Commont cleanup +rm -f ~/.bash_history +export HISTSIZE=0 + +rm -f /var/lib/systemd/random-seed +rm -rf /root/anaconda-ks.cfg +rm -rf /root/install.log +rm -rf /root/install.log.syslog +rm -rf /var/lib/yum/* +rm -rf /var/log/anaconda* +rm -rf /var/log/yum.log + +# Wipe machineid +cat /dev/null > /etc/machine-id + +# Fix selinux +touch /var/log/cron +touch /var/log/boot.log +mkdir -p /var/cache/yum +/usr/sbin/fixfiles -R -a restore + +true + +%end diff --git a/cloud/rocky-cloud-azure-packages.ks b/cloud/rocky-cloud-azure-packages.ks new file mode 100644 index 0000000..a79966c --- /dev/null +++ b/cloud/rocky-cloud-azure-packages.ks @@ -0,0 +1,62 @@ +%packages +@core +chrony +dnf +yum +cloud-init +cloud-utils-growpart +NetworkManager +dracut-config-generic +dracut-norescue +firewalld +gdisk +grub2 +kernel +nfs-utils +rsync +tar +dnf-utils +yum-utils +-aic94xx-firmware +-alsa-firmware +-alsa-lib +-alsa-tools-firmware +-ivtv-firmware +-iwl100-firmware +-iwl1000-firmware +-iwl105-firmware +-iwl135-firmware +-iwl2000-firmware +-iwl2030-firmware +-iwl3160-firmware +-iwl3945-firmware +-iwl4965-firmware +-iwl5000-firmware +-iwl5150-firmware +-iwl6000-firmware +-iwl6000g2a-firmware +-iwl6000g2b-firmware +-iwl6050-firmware +-iwl7260-firmware +-libertas-sd8686-firmware +-libertas-sd8787-firmware +-libertas-usb8388-firmware +-biosdevname +-iprutils +-plymouth + +python3-jsonschema +qemu-guest-agent +dhcp-client +cockpit-ws +cockpit-system +-langpacks-* +-langpacks-en + +rocky-release +rng-tools + +WALinuxAgent +hyperv-daemons + +%end diff --git a/cloud/rocky-cloud-base-packages.ks b/cloud/rocky-cloud-base-packages.ks new file mode 100644 index 0000000..aacfbf5 --- /dev/null +++ b/cloud/rocky-cloud-base-packages.ks @@ -0,0 +1,58 @@ +%packages +@core +chrony +dnf +yum +cloud-init +cloud-utils-growpart +NetworkManager +dracut-config-generic +dracut-norescue +firewalld +gdisk +grub2 +kernel +nfs-utils +rsync +tar +dnf-utils +yum-utils +-aic94xx-firmware +-alsa-firmware +-alsa-lib +-alsa-tools-firmware +-ivtv-firmware +-iwl100-firmware +-iwl1000-firmware +-iwl105-firmware +-iwl135-firmware +-iwl2000-firmware +-iwl2030-firmware +-iwl3160-firmware +-iwl3945-firmware +-iwl4965-firmware +-iwl5000-firmware +-iwl5150-firmware +-iwl6000-firmware +-iwl6000g2a-firmware +-iwl6000g2b-firmware +-iwl6050-firmware +-iwl7260-firmware +-libertas-sd8686-firmware +-libertas-sd8787-firmware +-libertas-usb8388-firmware +-biosdevname +-iprutils +-plymouth + +python3-jsonschema +qemu-guest-agent +dhcp-client +cockpit-ws +cockpit-system +-langpacks-* +-langpacks-en + +rocky-release +rng-tools +%end diff --git a/cloud/rocky-cloud-base.ks b/cloud/rocky-cloud-base.ks new file mode 100644 index 0000000..ac5d6b3 --- /dev/null +++ b/cloud/rocky-cloud-base.ks @@ -0,0 +1,17 @@ +text +lang en_US.UTF-8 +keyboard us +timezone UTC --isUtc +# Disk +auth --enableshadow --passalgo=sha512 +selinux --enforcing +firewall --enabled --service=ssh +firstboot --disable +# Network information +network --bootproto=dhcp --device=link --activate --onboot=on +network --hostname=localhost.localdomain +# Root password +services --disabled="kdump" --enabled="NetworkManager,sshd,rsyslog,chronyd,cloud-init,cloud-init-local,cloud-config,cloud-final,rngd" +rootpw --iscrypted thereisnopasswordanditslocked +url --url https://download.rockylinux.org/stg/rocky/8/BaseOS/$basearch/os/ +shutdown diff --git a/cloud/rocky-cloud-ocp-packages.ks b/cloud/rocky-cloud-ocp-packages.ks new file mode 100644 index 0000000..a2d9c5f --- /dev/null +++ b/cloud/rocky-cloud-ocp-packages.ks @@ -0,0 +1,58 @@ +%packages +@core +chrony +cloud-init +cloud-utils-growpart +cockpit-system +cockpit-ws +dhcp-client +dnf +dnf-utils +dracut-config-generic +firewalld +gdisk +grub2 +iscsi-initiator-utils +kernel +NetworkManager +nfs-utils +oci-utils +python3-jsonschema +qemu-guest-agent +rng-tools +rocky-release +rsync +tar +yum +yum-utils + +-aic94xx-firmware +-alsa-firmware +-alsa-lib +-alsa-tools-firmware +-biosdevname +-iprutils +-ivtv-firmware +-iwl100-firmware +-iwl1000-firmware +-iwl105-firmware +-iwl135-firmware +-iwl2000-firmware +-iwl2030-firmware +-iwl3160-firmware +-iwl3945-firmware +-iwl4965-firmware +-iwl5000-firmware +-iwl5150-firmware +-iwl6000-firmware +-iwl6000g2a-firmware +-iwl6000g2b-firmware +-iwl6050-firmware +-iwl7260-firmware +-langpacks-* +-langpacks-en +-libertas-sd8686-firmware +-libertas-sd8787-firmware +-libertas-usb8388-firmware +-plymouth +%end diff --git a/cloud/rocky-cloud-parts-base.ks b/cloud/rocky-cloud-parts-base.ks new file mode 100644 index 0000000..394090e --- /dev/null +++ b/cloud/rocky-cloud-parts-base.ks @@ -0,0 +1,6 @@ +zerombr +clearpart --all --initlabel --disklabel=gpt +part biosboot --size=1 --fstype=biosboot --asprimary +part /boot/efi --size=100 --fstype=efi --asprimary +part /boot --size=1000 --fstype=xfs --asprimary --label=boot +part / --size=8000 --fstype="xfs" --mkfsoptions "-m bigtime=0,inobtcount=0" --grow diff --git a/cloud/rocky-cloud-parts-lvm.ks b/cloud/rocky-cloud-parts-lvm.ks new file mode 100644 index 0000000..ed12d8d --- /dev/null +++ b/cloud/rocky-cloud-parts-lvm.ks @@ -0,0 +1,8 @@ +zerombr +clearpart --all --initlabel --disklabel=gpt +part biosboot --size=1 --fstype=biosboot --asprimary +part /boot/efi --size=100 --fstype=efi --asprimary +part /boot --size=1000 --fstype=xfs --asprimary --label=boot +part pv.01 --size=1 --ondisk=vda --asprimary --grow +volgroup rocky pv.01 +logvol / --vgname=rocky --size=8000 --name=root --grow diff --git a/cloud/rocky-ec2-base.ks b/cloud/rocky-ec2-base.ks new file mode 100644 index 0000000..0b23ed5 --- /dev/null +++ b/cloud/rocky-ec2-base.ks @@ -0,0 +1,136 @@ +%include rocky-cloud-base.ks +%include rocky-cloud-parts-base.ks +%include rocky-cloud-base-packages.ks + +bootloader --append="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0 nvme_core.io_timeout=4294967295 nvme_core.max_retries=10" --location=mbr --timeout=1 + +%post --erroronfail +passwd -d root +passwd -l root + +# Attempting to force legacy BIOS boot if we boot from UEFI +# This was backported from our 9 kickstarts to address some issues. +if [ "$(arch)" = "x86_64" ]; then + dnf install grub2-pc-modules grub2-pc -y + grub2-install --target=i386-pc /dev/vda +fi + +# Ensure that the pmbr_boot flag is off +parted /dev/vda disk_set pmbr_boot off + +# setup systemd to boot to the right runlevel +rm -f /etc/systemd/system/default.target +ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target +echo . + +dnf -C -y remove linux-firmware + +# Remove firewalld; it is required to be present for install/image building. +# but we dont ship it in cloud +dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1" +dnf -C -y remove avahi\* +sed -i '/^#NAutoVTs=.*/ a\ +NAutoVTs=0' /etc/systemd/logind.conf + +cat > /etc/sysconfig/network << EOF +NETWORKING=yes +NOZEROCONF=yes +EOF + +# For cloud images, 'eth0' _is_ the predictable device name, since +# we don't want to be tied to specific virtual (!) hardware +rm -f /etc/udev/rules.d/70* +ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules + +# simple eth0 config, again not hard-coded to the build hardware +cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF +DEVICE="eth0" +BOOTPROTO="dhcp" +ONBOOT="yes" +TYPE="Ethernet" +USERCTL="yes" +PEERDNS="yes" +IPV6INIT="no" +PERSISTENT_DHCLIENT="1" +EOF + +echo "virtual-guest" > /etc/tuned/active_profile + +# generic localhost names +cat > /etc/hosts << EOF +127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 +::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 + +EOF +echo . + +systemctl mask tmp.mount + +cat < /etc/sysconfig/kernel +# UPDATEDEFAULT specifies if new-kernel-pkg should make +# new kernels the default +UPDATEDEFAULT=yes + +# DEFAULTKERNEL specifies the default kernel package type +DEFAULTKERNEL=kernel +EOL + +# make sure firstboot doesn't start +echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot + +# rocky cloud user +echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers +sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg + +dnf clean all + +# XXX instance type markers - MUST match Rocky Infra expectation +echo 'ec2' > /etc/yum/vars/infra + +# change dhcp client retry/timeouts to resolve #6866 +cat >> /etc/dhcp/dhclient.conf << EOF + +timeout 300; +retry 60; +EOF + + +rm -rf /var/log/yum.log +rm -rf /var/lib/yum/* +rm -rf /root/install.log +rm -rf /root/install.log.syslog +rm -rf /root/anaconda-ks.cfg +rm -rf /var/log/anaconda* + +rm -f /var/lib/systemd/random-seed + +cat /dev/null > /etc/machine-id + +echo "Fixing SELinux contexts." +touch /var/log/cron +touch /var/log/boot.log +mkdir -p /var/cache/yum +/usr/sbin/fixfiles -R -a restore + +# remove these for ec2 debugging +sed -i -e 's/ rhgb quiet//' /boot/grub/grub.conf + +cat > /etc/modprobe.d/blacklist-nouveau.conf << EOL +blacklist nouveau +EOL + +# enable resizing on copied AMIs +echo 'install_items+=" sgdisk "' > /etc/dracut.conf.d/sgdisk.conf + +echo 'add_drivers+="xen-netfront xen-blkfront "' > /etc/dracut.conf.d/xen.conf +# Rerun dracut for the installed kernel (not the running kernel): +KERNEL_VERSION=$(rpm -q kernel --qf '%{V}-%{R}.%{arch}\n') +dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION + + +# reorder console entries +sed -i 's/console=tty0/console=tty0 console=ttyS0,115200n8/' /boot/grub2/grub.cfg + +true + +%end diff --git a/cloud/rocky-ec2-lvm.ks b/cloud/rocky-ec2-lvm.ks new file mode 100644 index 0000000..d066003 --- /dev/null +++ b/cloud/rocky-ec2-lvm.ks @@ -0,0 +1,136 @@ +%include rocky-cloud-base.ks +%include rocky-cloud-parts-lvm.ks +%include rocky-cloud-base-packages.ks + +bootloader --append="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0 nvme_core.io_timeout=4294967295 nvme_core.max_retries=10" --location=mbr --timeout=1 + +%post --erroronfail +passwd -d root +passwd -l root + +# Attempting to force legacy BIOS boot if we boot from UEFI +# This was backported from our 9 kickstarts to address some issues. +if [ "$(arch)" = "x86_64" ]; then + dnf install grub2-pc-modules grub2-pc -y + grub2-install --target=i386-pc /dev/vda +fi + +# Ensure that the pmbr_boot flag is off +parted /dev/vda disk_set pmbr_boot off + +# setup systemd to boot to the right runlevel +rm -f /etc/systemd/system/default.target +ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target +echo . + +dnf -C -y remove linux-firmware + +# Remove firewalld; it is required to be present for install/image building. +# but we dont ship it in cloud +dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1" +dnf -C -y remove avahi\* +sed -i '/^#NAutoVTs=.*/ a\ +NAutoVTs=0' /etc/systemd/logind.conf + +cat > /etc/sysconfig/network << EOF +NETWORKING=yes +NOZEROCONF=yes +EOF + +# For cloud images, 'eth0' _is_ the predictable device name, since +# we don't want to be tied to specific virtual (!) hardware +rm -f /etc/udev/rules.d/70* +ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules + +# simple eth0 config, again not hard-coded to the build hardware +cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF +DEVICE="eth0" +BOOTPROTO="dhcp" +ONBOOT="yes" +TYPE="Ethernet" +USERCTL="yes" +PEERDNS="yes" +IPV6INIT="no" +PERSISTENT_DHCLIENT="1" +EOF + +echo "virtual-guest" > /etc/tuned/active_profile + +# generic localhost names +cat > /etc/hosts << EOF +127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 +::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 + +EOF +echo . + +systemctl mask tmp.mount + +cat < /etc/sysconfig/kernel +# UPDATEDEFAULT specifies if new-kernel-pkg should make +# new kernels the default +UPDATEDEFAULT=yes + +# DEFAULTKERNEL specifies the default kernel package type +DEFAULTKERNEL=kernel +EOL + +# make sure firstboot doesn't start +echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot + +# rocky cloud user +echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers +sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg + +dnf clean all + +# XXX instance type markers - MUST match Rocky Infra expectation +echo 'ec2' > /etc/yum/vars/infra + +# change dhcp client retry/timeouts to resolve #6866 +cat >> /etc/dhcp/dhclient.conf << EOF + +timeout 300; +retry 60; +EOF + + +rm -rf /var/log/yum.log +rm -rf /var/lib/yum/* +rm -rf /root/install.log +rm -rf /root/install.log.syslog +rm -rf /root/anaconda-ks.cfg +rm -rf /var/log/anaconda* + +rm -f /var/lib/systemd/random-seed + +cat /dev/null > /etc/machine-id + +echo "Fixing SELinux contexts." +touch /var/log/cron +touch /var/log/boot.log +mkdir -p /var/cache/yum +/usr/sbin/fixfiles -R -a restore + +# remove these for ec2 debugging +sed -i -e 's/ rhgb quiet//' /boot/grub/grub.conf + +cat > /etc/modprobe.d/blacklist-nouveau.conf << EOL +blacklist nouveau +EOL + +# enable resizing on copied AMIs +echo 'install_items+=" sgdisk "' > /etc/dracut.conf.d/sgdisk.conf + +echo 'add_drivers+="xen-netfront xen-blkfront "' > /etc/dracut.conf.d/xen.conf +# Rerun dracut for the installed kernel (not the running kernel): +KERNEL_VERSION=$(rpm -q kernel --qf '%{V}-%{R}.%{arch}\n') +dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION + + +# reorder console entries +sed -i 's/console=tty0/console=tty0 console=ttyS0,115200n8/' /boot/grub2/grub.cfg + +true + +%end diff --git a/cloud/rocky-genclo-base.ks b/cloud/rocky-genclo-base.ks new file mode 100644 index 0000000..0253fdb --- /dev/null +++ b/cloud/rocky-genclo-base.ks @@ -0,0 +1,123 @@ +%include rocky-cloud-base.ks +%include rocky-cloud-parts-base.ks +%include rocky-cloud-base-packages.ks + +bootloader --append="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0" --location=mbr --timeout=1 + +%post --erroronfail +passwd -d root +passwd -l root + +# Attempting to force legacy BIOS boot if we boot from UEFI +# This was backported from our 9 kickstarts to address some issues. +if [ "$(arch)" = "x86_64" ]; then + dnf install grub2-pc-modules grub2-pc -y + grub2-install --target=i386-pc /dev/vda +fi + +# Ensure that the pmbr_boot flag is off +parted /dev/vda disk_set pmbr_boot off + +# setup systemd to boot to the right runlevel +rm -f /etc/systemd/system/default.target +ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target +echo . + +dnf -C -y remove linux-firmware + +# Remove firewalld; it is required to be present for install/image building. +# but we dont ship it in cloud +dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1" +dnf -C -y remove avahi\* +sed -i '/^#NAutoVTs=.*/ a\ +NAutoVTs=0' /etc/systemd/logind.conf + +cat > /etc/sysconfig/network << EOF +NETWORKING=yes +NOZEROCONF=yes +EOF + +# Remove build-time resolvers to fix #16948 +echo > /etc/resolv.conf + +# For cloud images, 'eth0' _is_ the predictable device name, since +# we don't want to be tied to specific virtual (!) hardware +rm -f /etc/udev/rules.d/70* +ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules + +# simple eth0 config, again not hard-coded to the build hardware +cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF +DEVICE="eth0" +BOOTPROTO="dhcp" +ONBOOT="yes" +TYPE="Ethernet" +USERCTL="yes" +PEERDNS="yes" +IPV6INIT="no" +PERSISTENT_DHCLIENT="1" +EOF + +echo "virtual-guest" > /etc/tuned/active_profile + +# generic localhost names +cat > /etc/hosts << EOF +127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 +::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 + +EOF +echo . + +systemctl mask tmp.mount + +cat < /etc/sysconfig/kernel +# UPDATEDEFAULT specifies if new-kernel-pkg should make +# new kernels the default +UPDATEDEFAULT=yes + +# DEFAULTKERNEL specifies the default kernel package type +DEFAULTKERNEL=kernel +EOL + +# make sure firstboot doesn't start +echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot + +# rocky cloud user +echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers +sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg + +dnf clean all + +# XXX instance type markers - MUST match Rocky Infra expectation +echo 'genclo' > /etc/yum/vars/infra + +# change dhcp client retry/timeouts to resolve #6866 +cat >> /etc/dhcp/dhclient.conf << EOF + +timeout 300; +retry 60; +EOF + + +rm -rf /var/log/yum.log +rm -rf /var/lib/yum/* +rm -rf /root/install.log +rm -rf /root/install.log.syslog +rm -rf /root/anaconda-ks.cfg +rm -rf /var/log/anaconda* + +rm -f /var/lib/systemd/random-seed + +cat /dev/null > /etc/machine-id + +echo "Fixing SELinux contexts." +touch /var/log/cron +touch /var/log/boot.log +mkdir -p /var/cache/yum +/usr/sbin/fixfiles -R -a restore + +# reorder console entries +sed -i 's/console=tty0/console=tty0 console=ttyS0,115200n8/' /boot/grub2/grub.cfg + +true + +%end diff --git a/cloud/rocky-genclo-lvm.ks b/cloud/rocky-genclo-lvm.ks new file mode 100644 index 0000000..9b9fa27 --- /dev/null +++ b/cloud/rocky-genclo-lvm.ks @@ -0,0 +1,123 @@ +%include rocky-cloud-base.ks +%include rocky-cloud-parts-lvm.ks +%include rocky-cloud-base-packages.ks + +bootloader --append="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0" --location=mbr --timeout=1 + +%post --erroronfail +passwd -d root +passwd -l root + +# Attempting to force legacy BIOS boot if we boot from UEFI +# This was backported from our 9 kickstarts to address some issues. +if [ "$(arch)" = "x86_64" ]; then + dnf install grub2-pc-modules grub2-pc -y + grub2-install --target=i386-pc /dev/vda +fi + +# Ensure that the pmbr_boot flag is off +parted /dev/vda disk_set pmbr_boot off + +# setup systemd to boot to the right runlevel +rm -f /etc/systemd/system/default.target +ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target +echo . + +dnf -C -y remove linux-firmware + +# Remove firewalld; it is required to be present for install/image building. +# but we dont ship it in cloud +dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1" +dnf -C -y remove avahi\* +sed -i '/^#NAutoVTs=.*/ a\ +NAutoVTs=0' /etc/systemd/logind.conf + +cat > /etc/sysconfig/network << EOF +NETWORKING=yes +NOZEROCONF=yes +EOF + +# Remove build-time resolvers to fix #16948 +echo > /etc/resolv.conf + +# For cloud images, 'eth0' _is_ the predictable device name, since +# we don't want to be tied to specific virtual (!) hardware +rm -f /etc/udev/rules.d/70* +ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules + +# simple eth0 config, again not hard-coded to the build hardware +cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF +DEVICE="eth0" +BOOTPROTO="dhcp" +ONBOOT="yes" +TYPE="Ethernet" +USERCTL="yes" +PEERDNS="yes" +IPV6INIT="no" +PERSISTENT_DHCLIENT="1" +EOF + +echo "virtual-guest" > /etc/tuned/active_profile + +# generic localhost names +cat > /etc/hosts << EOF +127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 +::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 + +EOF +echo . + +systemctl mask tmp.mount + +cat < /etc/sysconfig/kernel +# UPDATEDEFAULT specifies if new-kernel-pkg should make +# new kernels the default +UPDATEDEFAULT=yes + +# DEFAULTKERNEL specifies the default kernel package type +DEFAULTKERNEL=kernel +EOL + +# make sure firstboot doesn't start +echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot + +# rocky cloud user +echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers +sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg + +dnf clean all + +# XXX instance type markers - MUST match Rocky Infra expectation +echo 'genclo' > /etc/yum/vars/infra + +# change dhcp client retry/timeouts to resolve #6866 +cat >> /etc/dhcp/dhclient.conf << EOF + +timeout 300; +retry 60; +EOF + + +rm -rf /var/log/yum.log +rm -rf /var/lib/yum/* +rm -rf /root/install.log +rm -rf /root/install.log.syslog +rm -rf /root/anaconda-ks.cfg +rm -rf /var/log/anaconda* + +rm -f /var/lib/systemd/random-seed + +cat /dev/null > /etc/machine-id + +echo "Fixing SELinux contexts." +touch /var/log/cron +touch /var/log/boot.log +mkdir -p /var/cache/yum +/usr/sbin/fixfiles -R -a restore + +# reorder console entries +sed -i 's/console=tty0/console=tty0 console=ttyS0,115200n8/' /boot/grub2/grub.cfg + +true + +%end diff --git a/cloud/rocky-ocp.ks b/cloud/rocky-ocp.ks new file mode 100644 index 0000000..698bc37 --- /dev/null +++ b/cloud/rocky-ocp.ks @@ -0,0 +1,224 @@ +%include rocky-cloud-base.ks +%include rocky-cloud-parts-lvm.ks +%include rocky-cloud-ocp-packages.ks + +bootloader --append="console=ttyS0,115200n8 console=tty0 no_timer_check crashkernel=auto net.ifnames=0 LANG=en_US.UTF-8 transparent_hugepage=never rd.luks=0 rd.md=0 rd.dm=0 rd.lvm.vg=rocky rd.lvm.lv=rocky/root rd.net.timeout.dhcp=10" --location=mbr --timeout=1 +repo --name="oraclelinux-addons" --baseurl=http://yum.oracle.com/repo/OracleLinux/OL8/addons/$basearch/ --install --includepkgs="oci-utils" + +%post --erroronfail +# Attempting to force legacy BIOS boot if we boot from UEFI +# This was backported from our 9 kickstarts to address some issues. +if [ "$(arch)" = "x86_64" ]; then + dnf install grub2-pc-modules grub2-pc -y + grub2-install --target=i386-pc /dev/vda +fi + +# Ensure that the pmbr_boot flag is off +parted /dev/vda disk_set pmbr_boot off + +# setup systemd to boot to the right runlevel +rm -f /etc/systemd/system/default.target +ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target +echo . + +dnf -C -y remove linux-firmware + +# Remove firewalld; it is required to be present for install/image building. +# but we dont ship it in cloud +dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1" +dnf -C -y remove avahi\* +sed -i '/^#NAutoVTs=.*/ a\ +NAutoVTs=0' /etc/systemd/logind.conf + +cat > /etc/sysconfig/network << EOF +NETWORKING=yes +NOZEROCONF=yes +EOF + +# Remove build-time resolvers to fix #16948 +echo > /etc/resolv.conf + +# For cloud images, 'eth0' _is_ the predictable device name, since +# we don't want to be tied to specific virtual (!) hardware +rm -f /etc/udev/rules.d/70* +ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules + +# simple eth0 config, again not hard-coded to the build hardware +cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF +DEVICE="eth0" +BOOTPROTO="dhcp" +ONBOOT="yes" +TYPE="Ethernet" +USERCTL="yes" +PEERDNS="yes" +IPV6INIT="no" +PERSISTENT_DHCLIENT="1" +EOF + +echo "virtual-guest" > /etc/tuned/active_profile + +# generic localhost names +cat > /etc/hosts << EOF +127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 +::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 + +EOF +echo . + +systemctl mask tmp.mount + +cat < /etc/sysconfig/kernel +# UPDATEDEFAULT specifies if new-kernel-pkg should make +# new kernels the default +UPDATEDEFAULT=yes + +# DEFAULTKERNEL specifies the default kernel package type +DEFAULTKERNEL=kernel +EOL + +# make sure firstboot doesn't start +echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot + +# rocky cloud user +echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers +sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg + +dnf clean all + +# XXX instance type markers - MUST match Rocky Infra expectation +echo 'oci' > /etc/yum/vars/infra + +# change dhcp client retry/timeouts to resolve #6866 +cat >> /etc/dhcp/dhclient.conf << EOF + +timeout 300; +retry 60; +EOF + + +rm -rf /var/log/yum.log +rm -rf "/var/lib/yum/*" +rm -rf /root/install.log +rm -rf /root/install.log.syslog +rm -rf /root/anaconda-ks.cfg +rm -rf /var/log/anaconda* + +rm -f /var/lib/systemd/random-seed + +cat /dev/null > /etc/machine-id + +echo "Fixing SELinux contexts." +touch /var/log/cron +touch /var/log/boot.log +mkdir -p /var/cache/yum +/usr/sbin/fixfiles -R -a restore + +# remove these for debugging +sed -i -e 's/ rhgb quiet//' /boot/grub/grub.conf + +# enable resizing on copied AMIs +echo 'install_items+=" sgdisk "' > /etc/dracut.conf.d/sgdisk.conf + + +# OCI - Start ocid on boot +systemctl enable ocid.service + +# OCI - Need iscsi as a dracut module +echo 'add_dracutmodules+="iscsi"' > /etc/dracut.conf.d/iscsi.conf + +# OCI - Virtio drivers +echo 'add_drivers+="virtio virtio_blk virtio_net virtio_pci virtio_ring virtio_scsi virtio_console"' > /etc/dracut.conf.d/virtio.conf + +# OCI - YOLO +mkdir -p /usr/lib/dracut/modules.d/95oci +OCIDRACUT="H4sIAGtFHmMAA+2WWW/bOBCA/Vr+illZzQXoluPUhgMURYrmpS02fevuGpJIWYQVUiWpJoHr/15S +crLZZBs3QA8U5QfYosQ5NUNSrRRBTfMAi6xoVXDOcVsT6ePg2YgXNBh8C0LNeDTqrpq7124cpfF4 +nIzT8fhwEEaj+HA8gNE38b6FVqpMAAwE5+ohuW3zvyjtw/UnLMtr4lFZSOrlV00mpS+rR/rYUv84 +StJBlIx10ZNREscD/SRNkwGE3yXjO/zm9R/+EeSUBbJCQ/AOPNANQCYgK1LXniwEbdQUKMOEKU9l +ufT6eUbrqRby8kzSwuNlKYmaQDo1JrQhcjkBJWdHIC9mKUg9TIEoKGlN1FVDZtobGr7NVFFB11nm +3YLikNU1v4A8ozXwVgEtQVUEullM5RKKjGkZQTJ8BTmBkrcMo6Eg5QTeiCxvFxMYJmESxWGYImRc +wYLo8i7gOMDkY8Dauob4eCeCT5/Ah1uN7+mhbmx0+vrs5M93s10kZo67Mp6Hec2L5WTtIB1Oby3n +vIYQBPa76P1+XcDODrwHj4DjCgf+nprYGSDQlFwA69KgDNy93ooERpR5uD8FzDs5w3utv+qEnz6d +HKwdmIHTudE2TdgFZ4qyltwodGk2mZBk3snNO0dfTlh7vc722sQ9bcftInCMmiCqFQyiG+lN2HPC +ipm7J5WYC9LUWUH+VXMC/fsrLp39TgtzRuAe3RQpKr5JcAJnS9o0lC3AveXD930HjnfiR4lDl/7y +XC5uqUkjT7CZdgJ13gSdHbP+FcHebSNOr3VJFYSopGgXfWX1S21ZmgV109c3rYCuwzgxe6oJ+/Ts +xdkpbPR5oyhn15l+leR/kuw13L6BdeFAEgwehd3gn7fP372a+QdusBK9ilSYmniq9RTc1eU0MBKB +HnwI11P9n6x3/ycP3QsXme4E56VeoNr4g9GZt/az9zbLdrac//29p7f3tnn8wb9h2/dfchjdOf/D +OIns+f8j2Jz/+iD/4V8ARUWK5d4+rNCTzRkTojVCmDSEYXl/gjJdqrruJ8zNvOJ8CY0gXqt3NTg6 +0vufjg5T8YXvVkeb+dkv3GKxWCwWi8VisVgsFovFYrFYLBaLxWL5jnwGdMMrBgAoAAA=" + +base64 -d <<<"$OCIDRACUT" | tar -xz + +OCICLOUDCFG="IyBPQ0kgY2xvdWQtaW5pdCBjb25maWd1cmF0aW9uCmRhdGFzb3VyY2VfbGlzdDogWydPcmFjbGUn +LCAnT3BlblN0YWNrJ10KZGF0YXNvdXJjZToKICBPcGVuU3RhY2s6CiAgICBtZXRhZGF0YV91cmxz +OiBbJ2h0dHA6Ly8xNjkuMjU0LjE2OS4yNTQnXQogICAgdGltZW91dDogMTAKICAgIG1heF93YWl0 +OiAyMAoKIyBzd2FwIGZpbGUKc3dhcDoKICAgZmlsZW5hbWU6IC8uc3dhcGZpbGUKICAgc2l6ZTog +ImF1dG8iCgpjbG91ZF9pbml0X21vZHVsZXM6CiMgT0NJOiBkaXNrX3NldHVwIGlzIGRpc2FibGVk +CiMtIGRpc2tfc2V0dXAKIC0gbWlncmF0b3IKIC0gYm9vdGNtZAogLSB3cml0ZS1maWxlcwojIE9D +STogVGhlIGdyb3dwYXJ0IG1vZHVsZSBpcyBkaXNhYmxlZCBieSBkZWZhdWx0LiBUbyBlbmFibGUg +YXV0b21hdGljIGJvb3Qgdm9sdW1lIHJlc2l6aW5nLCB1bmNvbW1lbnQKIyB0aGUgYmVsb3cgZW50 +cnkgZm9yICctIGdyb3dwYXJ0JyBhbmQgcmVib290LiBBbGwgdGhlIGRlcGVuZGVudCBwYWNrYWdl +cyBmb3IgdGhlIGdyb3dwYXJ0CiMgbW9kdWxlIHRvIHdvcmsgc3VjaCBhcyBjbG91ZC11dGlscy1n +cm93cGFydCBhbmQgZ2Rpc2sgYXJlIGFscmVhZHkgaW5jbHVkZWQgaW4gdGhlIGltYWdlLgojLSBn +cm93cGFydAogLSByZXNpemVmcwojIE9DSTogc2V0X2hvc3RuYW1lLCB1cGRhdGVfaG9zdG5hbWUs +IHVwZGF0ZV9ldGNfaG9zdHMgYXJlIGRpc2FibGVkCiMtIHNldF9ob3N0bmFtZQojLSB1cGRhdGVf +aG9zdG5hbWUKIy0gdXBkYXRlX2V0Y19ob3N0cwogLSByc3lzbG9nCiAtIHVzZXJzLWdyb3Vwcwog +LSBzc2gKCmNsb3VkX2NvbmZpZ19tb2R1bGVzOgogLSBtb3VudHMKIC0gbG9jYWxlCiAtIHNldC1w +YXNzd29yZHMKIyBPQ0k6IHJoX3N1YnNjcmlwdGlvbiBpcyBkaXNhYmxlZAojLSByaF9zdWJzY3Jp +cHRpb24KIC0geXVtLWFkZC1yZXBvCiAtIHBhY2thZ2UtdXBkYXRlLXVwZ3JhZGUtaW5zdGFsbAog +LSB0aW1lem9uZQogLSBudHAKIC0gcHVwcGV0CiAtIGNoZWYKIC0gc2FsdC1taW5pb24KIC0gbWNv +bGxlY3RpdmUKIC0gZGlzYWJsZS1lYzItbWV0YWRhdGEKIC0gcnVuY21kCgpjbG91ZF9maW5hbF9t +b2R1bGVzOgogLSByaWdodHNjYWxlX3VzZXJkYXRhCiAtIHNjcmlwdHMtcGVyLW9uY2UKIC0gc2Ny +aXB0cy1wZXItYm9vdAogLSBzY3JpcHRzLXBlci1pbnN0YW5jZQogLSBzY3JpcHRzLXVzZXIKIC0g +c3NoLWF1dGhrZXktZmluZ2VycHJpbnRzCiAtIGtleXMtdG8tY29uc29sZQogLSBwaG9uZS1ob21l +CiAtIGZpbmFsLW1lc3NhZ2UKIyBPQ0k6IHBvd2VyLXN0YXRlLWNoYW5nZSBpcyBkaXNhYmxlZAoj +LSBwb3dlci1zdGF0ZS1jaGFuZ2UKCg==" + +base64 -d <<<"$OCICLOUDCFG" >> /etc/cloud/cloud.cfg.d/99_oci.cfg + +# Rerun dracut for the installed kernel (not the running kernel): +KERNEL_VERSION=$(rpm -q kernel --qf '%%{V}-%%{R}.%%{arch}\n') +dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION + +# OCI needs Iscsi +grubby --args="libiscsi.debug_libiscsi_eh=1 netroot=iscsi:169.254.0.2:::1:iqn.2015-02.oracle.boot:uefi ip=dhcp rd.iscsi.bypass rd.iscsi.param=node.session.timeo.replacement_timeout=6000" --update-kernel "/boot/vmlinuz-$KERNEL_VERSION" + +passwd -d root +passwd -l root + +# Copyright (C) 2020 Oracle Corp., Inc. All rights reserved. +# Licensed under the Universal Permissive License v 1.0 as shown at http://oss.oracle.com/licenses/upl +# +# /usr/lib/oci-linux-config/cloud/scripts/initramfs-mod/net.sh +# + +echo "$(date) - OCI initramfs network modification script started." + +# Symlink network config files where cloud-init >= 19.4 expects them +DRACUT_CFG=/run/initramfs/state/etc/sysconfig/network-scripts +CI_DIR=/run +if [ -d $DRACUT_CFG ]; then + FILE_COUNT=`ls $DRACUT_CFG | wc -l` + if [ $FILE_COUNT -eq 0 ]; then + # Create dummy file if dracut did not create network device config + dummycfg=$CI_DIR/net-dummy.conf + echo "DEVICE=\"dummy\"" > $dummycfg + echo "BOOTPROTO=dhcp" >> $dummycfg + echo "$(date) - Creating dummy config $dummycfg." + else + for dcfg in $DRACUT_CFG/*; do + filename=${dcfg##*/} + devname=${filename##ifcfg-} + cicfg=$CI_DIR/net-$devname.conf + if [ ! -e $cicfg ]; then + echo "$(date) - Creating symlink from $dcfg to $cicfg." + ln -s $dcfg $cicfg + fi + done + fi +fi + +echo "$(date) - OCI initramfs network modification script done." +true + +%end diff --git a/container/rocky-container-base.ks b/container/rocky-container-base.ks new file mode 100644 index 0000000..72abc2f --- /dev/null +++ b/container/rocky-container-base.ks @@ -0,0 +1,75 @@ +%include rocky-container.ks + +%packages --ignoremissing --excludedocs --instLangs=en --nocore --excludeWeakdeps +bash +binutils +coreutils-single +glibc-minimal-langpack +hostname +iputils # this pulls in systemd, lets ask for it by name, too +less +systemd +rocky-release +rootfiles +tar +vim-minimal +yum + +-brotli +-dosfstools +-kexec-tools +-e2fsprogs +-firewalld +-fuse-libs +-gettext* +-gnupg2-smime +-grub\* +-iptables +-kernel +-libss +-os-prober* +-pinentry +-qemu-guest-agent +-shared-mime-info +-trousers +-xfsprogs +-xkeyboard-config +%end + +%post --erroronfail --log=/root/anaconda-post.log +# container customizations inside the chroot + +# Stay compatible +echo 'container' > /etc/dnf/vars/infra + +#Generate installtime file record +/bin/date +%Y%m%d_%H%M > /etc/BUILDTIME + +# Limit languages to help reduce size. +LANG="en_US" +echo "%_install_langs $LANG" > /etc/rpm/macros.image-language-conf + +# https://bugzilla.redhat.com/show_bug.cgi?id=1727489 +echo 'LANG="C.UTF-8"' > /etc/locale.conf + +# systemd fixes +:> /etc/machine-id +umount /run +systemd-tmpfiles --create --boot + +# mask mounts and login bits +systemctl mask \ + console-getty.service \ + dev-hugepages.mount \ + getty.target \ + sys-fs-fuse-connections.mount \ + systemd-logind.service \ + systemd-remount-fs.service + +# Cleanup the image +rm -f /etc/udev/hwdb.bin +rm -rf /usr/lib/udev/hwdb.d/ \ + /boot /var/lib/dnf/history.* \ + /tmp/* /tmp/.* || true + +%end diff --git a/container/rocky-container-minimal.ks b/container/rocky-container-minimal.ks new file mode 100644 index 0000000..c9f1109 --- /dev/null +++ b/container/rocky-container-minimal.ks @@ -0,0 +1,77 @@ +%include rocky-container.ks + +%packages --ignoremissing --excludedocs --instLangs=en --nocore --excludeWeakdeps +bash +coreutils-single +glibc-minimal-langpack +systemd +microdnf +rocky-release + +-brotli +-dosfstools +-e2fsprogs +-firewalld +-fuse-libs +-gettext* +-gnupg2-smime +-grub\* +-hostname +-iptables +-iputils +-kernel +-kexec-tools +-less +-libss +-os-prober* +-pinentry +-qemu-guest-agent +-rootfiles +-shared-mime-info +-tar +-trousers +-vim-minimal +-xfsprogs +-xkeyboard-config +-yum +%end + +%post --erroronfail --log=/root/anaconda-post.log +# container customizations inside the chroot + + +rpm --rebuilddb + +/bin/date +%Y-%m-%d_%H:%M:%S > /etc/BUILDTIME + +echo 'container' > /etc/dnf/vars/infra + +LANG="en_US" +echo '%_install_langs en_US.UTF-8' > /etc/rpm/macros.image-language-conf +echo 'LANG="C.UTF-8"' > /etc/locale.conf + +rm -f /var/lib/dnf/history.* +rm -fr "/var/log/*" "/tmp/*" "/tmp/.*" + +for dir in $(ls -d "/usr/share/{locale,i18n}/*" | grep -v 'en_US\|all_languages\|locale\.alias'); do rm -fr $dir; done + +# systemd fixes +umount /run +systemd-tmpfiles --create --boot + +# mask mounts and login bits +systemctl mask \ + console-getty.service \ + dev-hugepages.mount \ + getty.target \ + sys-fs-fuse-connections.mount \ + systemd-logind.service \ + systemd-remount-fs.service + +# Cleanup the image +rm -f /etc/udev/hwdb.bin +rm -rf /usr/lib/udev/hwdb.d/ \ + /boot /var/lib/dnf/history.* \ + "/tmp/*" "/tmp/.*" || true + +%end diff --git a/container/rocky-container-ubi.ks b/container/rocky-container-ubi.ks new file mode 100644 index 0000000..582f2a7 --- /dev/null +++ b/container/rocky-container-ubi.ks @@ -0,0 +1,78 @@ +%include rocky-container.ks + +%packages --ignoremissing --excludedocs --instLangs=en --nocore --excludeWeakdeps +bash +binutils +brotli +coreutils-single +crypto-policies-scripts +dmidecode +findutils +glibc-minimal-langpack +libcurl +systemd +rocky-release +rootfiles +tar +vim-minimal +which +yum + + +-dosfstools +-e2fsprogs +-firewalld +-fuse-libs +-gettext* +-gnupg2-smime +-grub\* +-iptables +-kernel +-kexec-tools +-libss +-os-prober* +-pinentry +-qemu-guest-agent +-shared-mime-info +-trousers +-xfsprogs +-xkeyboard-config +%end + +%post --erroronfail --log=/root/anaconda-post.log +# container customizations inside the chroot + +# Stay compatible +echo 'container' > /etc/dnf/vars/infra + +#Generate installtime file record +/bin/date +%Y%m%d_%H%M > /etc/BUILDTIME + +# Limit languages to help reduce size. +LANG="en_US" +echo "%_install_langs $LANG" > /etc/rpm/macros.image-language-conf + +# https://bugzilla.redhat.com/show_bug.cgi?id=1727489 +echo 'LANG="C.UTF-8"' > /etc/locale.conf + +# systemd fixes +:> /etc/machine-id +umount /run +systemd-tmpfiles --create --boot + +# mask mounts and login bits +systemctl mask \ + console-getty.service \ + dev-hugepages.mount \ + getty.target \ + sys-fs-fuse-connections.mount \ + systemd-logind.service \ + systemd-remount-fs.service + +# Cleanup the image +rm -f /etc/udev/hwdb.bin +rm -rf /usr/lib/udev/hwdb.d/ \ + /boot /var/lib/dnf/history.* \ + /tmp/* /tmp/.* || true + +%end diff --git a/container/rocky-container.ks b/container/rocky-container.ks new file mode 100644 index 0000000..e28fe7d --- /dev/null +++ b/container/rocky-container.ks @@ -0,0 +1,18 @@ +url --url https://download.rockylinux.org/stg/rocky/8/BaseOS/$basearch/os/ + +text +bootloader --disable +firewall --disabled +network --bootproto=dhcp --device=link --activate --onboot=on +rootpw --lock --iscrypted locked +selinux --disabled +shutdown + +keyboard us +lang en_US.UTF-8 +timezone --isUtc --nontp UTC + +# Disk setup +zerombr +clearpart --all --initlabel +autopart --noboot --nohome --noswap --nolvm --fstype=ext4 diff --git a/vagrant/rocky-vagrant-base.ks b/vagrant/rocky-vagrant-base.ks new file mode 100644 index 0000000..5b8ab31 --- /dev/null +++ b/vagrant/rocky-vagrant-base.ks @@ -0,0 +1,25 @@ +url --url https://download.rockylinux.org/stg/rocky/8/BaseOS/$basearch/os/ +repo --name=plus --baseurl=http://dl.rockylinux.org/pub/rocky/8/plus/$basearch/os + +text +keyboard --vckeymap us +lang en_US +skipx +network --bootproto=dhcp --device=link --activate --onboot=on +rootpw --plaintext vagrant +firewall --disabled +timezone --utc UTC +services --enabled=vmtoolsd +# The biosdevname and ifnames options ensure we get "eth0" as our interface +# even in environments like virtualbox that emulate a real NW card +bootloader --timeout=1 --append="no_timer_check console=tty0 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0 elevator=noop" +zerombr +clearpart --all --initlabel +reqpart +part / --fstype=xfs --asprimary --size=1024 --grow + +user --name=vagrant --plaintext --password=vagrant + +shutdown +%addon com_redhat_kdump --disable +%end diff --git a/vagrant/rocky-vagrant-libvirt.ks b/vagrant/rocky-vagrant-libvirt.ks new file mode 100644 index 0000000..ffbc862 --- /dev/null +++ b/vagrant/rocky-vagrant-libvirt.ks @@ -0,0 +1,94 @@ +%include rocky-vagrant-base.ks +%include rocky-vagrant-packages-hyperv.ks + +%post +# configure swap to a file +fallocate -l 2G /swapfile +chmod 600 /swapfile +mkswap /swapfile +echo "/swapfile none swap defaults 0 0" >> /etc/fstab + +# sudo +echo "%vagrant ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/vagrant +chmod 0440 /etc/sudoers.d/vagrant + +# Fix for https://github.com/CentOS/sig-cloud-instance-build/issues/38 +cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF +DEVICE="eth0" +BOOTPROTO="dhcp" +ONBOOT="yes" +TYPE="Ethernet" +PERSISTENT_DHCLIENT="yes" +EOF + +# sshd: disable password authentication and DNS checks +ex -s /etc/ssh/sshd_config <>/etc/sysconfig/sshd <> /home/vagrant/.ssh/authorized_keys +chmod 600 /home/vagrant/.ssh/authorized_keys +chown -R vagrant:vagrant /home/vagrant/.ssh + +# Fix for issue #76, regular users can gain admin privileges via su +ex -s /etc/pam.d/su <<'EOF' +# allow vagrant to use su, but prevent others from becoming root or vagrant +/^account\s\+sufficient\s\+pam_succeed_if.so uid = 0 use_uid quiet$/ +:append +account [success=1 default=ignore] \\ + pam_succeed_if.so user = vagrant use_uid quiet +account required pam_succeed_if.so user notin root:vagrant +. +:update +:quit +EOF + +# systemd should generate a new machine id during the first boot, to +# avoid having multiple Vagrant instances with the same id in the local +# network. /etc/machine-id should be empty, but it must exist to prevent +# boot errors (e.g. systemd-journald failing to start). +:>/etc/machine-id + +echo 'vag' > /etc/yum/vars/infra + +# Blacklist the floppy module to avoid probing timeouts +echo blacklist floppy > /etc/modprobe.d/nofloppy.conf +chcon -u system_u -r object_r -t modules_conf_t /etc/modprobe.d/nofloppy.conf + +# Customize the initramfs +pushd /etc/dracut.conf.d +# Enable VMware PVSCSI support for VMware Fusion guests. +echo 'add_drivers+=" vmw_pvscsi "' > vmware-fusion-drivers.conf +echo 'add_drivers+=" hv_netvsc hv_storvsc hv_utils hv_vmbus hid-hyperv "' > hyperv-drivers.conf +# There's no floppy controller, but probing for it generates timeouts +echo 'omit_drivers+=" floppy "' > nofloppy.conf +popd +# Fix the SELinux context of the new files +restorecon -f - <> /etc/fstab + +# sudo +echo "%vagrant ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/vagrant +chmod 0440 /etc/sudoers.d/vagrant + +# Fix for https://github.com/CentOS/sig-cloud-instance-build/issues/38 +cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF +DEVICE="eth0" +BOOTPROTO="dhcp" +ONBOOT="yes" +TYPE="Ethernet" +PERSISTENT_DHCLIENT="yes" +EOF + +# sshd: disable password authentication and DNS checks +# for virtualbox we're disabling it after provisioning + +# Decrease connection time by preventing reverse DNS lookups +# (see https://lists.centos.org/pipermail/centos-devel/2016-July/014981.html +# and man sshd for more information) +OPTIONS="-u0" +EOF + +# Default insecure vagrant key +mkdir -m 0700 -p /home/vagrant/.ssh +echo "ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key" >> /home/vagrant/.ssh/authorized_keys +chmod 600 /home/vagrant/.ssh/authorized_keys +chown -R vagrant:vagrant /home/vagrant/.ssh + +# Fix for issue #76, regular users can gain admin privileges via su +ex -s /etc/pam.d/su <<'EOF' +# allow vagrant to use su, but prevent others from becoming root or vagrant +/^account\s\+sufficient\s\+pam_succeed_if.so uid = 0 use_uid quiet$/ +:append +account [success=1 default=ignore] \\ + pam_succeed_if.so user = vagrant use_uid quiet +account required pam_succeed_if.so user notin root:vagrant +. +:update +:quit +EOF + +# Install VBoxGuestAdditions for installed kernel +kver=$(rpm -q --queryformat="%{VERSION}-%{RELEASE}.%{ARCH}" kernel) +dnf -y install kernel-devel gcc make perl elfutils-libelf-devel +curl -L -o /tmp/vboxadditions.iso https://download.virtualbox.org/virtualbox/6.1.34/VBoxGuestAdditions_6.1.34.iso +mkdir -p /media/VBoxGuestAdditions +mount -o loop,ro /tmp/vboxadditions.iso /media/VBoxGuestAdditions +mkdir -p /tmp/VBoxGuestAdditions +sh /media/VBoxGuestAdditions/VBoxLinuxAdditions.run --nox11 --noexec --keep --target /tmp/VBoxGuestAdditions +pushd /tmp/VBoxGuestAdditions +./install.sh +/sbin/rcvboxadd quicksetup all +popd +ls "/lib/modules/${kver}/misc/" +modinfo "/lib/modules/${kver}/misc/vboxsf.ko" +rm -rf /tmp/VBoxGuestAdditions +umount /media/VBoxGuestAdditions +rm -f /tmp/vboxadditions.iso +rmdir /media/VBoxGuestAdditions +dnf -y remove kernel-devel gcc make perl elfutils-libelf-devel + +# systemd should generate a new machine id during the first boot, to +# avoid having multiple Vagrant instances with the same id in the local +# network. /etc/machine-id should be empty, but it must exist to prevent +# boot errors (e.g. systemd-journald failing to start). +:>/etc/machine-id + +echo 'vag' > /etc/yum/vars/infra + +# Blacklist the floppy module to avoid probing timeouts +echo blacklist floppy > /etc/modprobe.d/nofloppy.conf +chcon -u system_u -r object_r -t modules_conf_t /etc/modprobe.d/nofloppy.conf + +# Customize the initramfs +pushd /etc/dracut.conf.d +# Enable VMware PVSCSI support for VMware Fusion guests. +echo 'add_drivers+=" vmw_pvscsi "' > vmware-fusion-drivers.conf +echo 'add_drivers+=" hv_netvsc hv_storvsc hv_utils hv_vmbus hid-hyperv "' > hyperv-drivers.conf +# There's no floppy controller, but probing for it generates timeouts +echo 'omit_drivers+=" floppy "' > nofloppy.conf +popd +# Fix the SELinux context of the new files +restorecon -f - <> /etc/fstab + +# sudo +echo "%vagrant ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/vagrant +chmod 0440 /etc/sudoers.d/vagrant + +# vmware needs open-vm-tools; on aarch, this is in plus +dnf config-manager --set-enabled=plus + + +# Fix for https://github.com/CentOS/sig-cloud-instance-build/issues/38 +cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF +DEVICE="eth0" +BOOTPROTO="dhcp" +ONBOOT="yes" +TYPE="Ethernet" +PERSISTENT_DHCLIENT="yes" +EOF + +# sshd: disable password authentication and DNS checks +ex -s /etc/ssh/sshd_config <>/etc/sysconfig/sshd <> /home/vagrant/.ssh/authorized_keys +chmod 600 /home/vagrant/.ssh/authorized_keys +chown -R vagrant:vagrant /home/vagrant/.ssh + +# Fix for issue #76, regular users can gain admin privileges via su +ex -s /etc/pam.d/su <<'EOF' +# allow vagrant to use su, but prevent others from becoming root or vagrant +/^account\s\+sufficient\s\+pam_succeed_if.so uid = 0 use_uid quiet$/ +:append +account [success=1 default=ignore] \\ + pam_succeed_if.so user = vagrant use_uid quiet +account required pam_succeed_if.so user notin root:vagrant +. +:update +:quit +EOF + +# systemd should generate a new machine id during the first boot, to +# avoid having multiple Vagrant instances with the same id in the local +# network. /etc/machine-id should be empty, but it must exist to prevent +# boot errors (e.g. systemd-journald failing to start). +:>/etc/machine-id + +echo 'vag' > /etc/yum/vars/infra + +# Blacklist the floppy module to avoid probing timeouts +echo blacklist floppy > /etc/modprobe.d/nofloppy.conf +chcon -u system_u -r object_r -t modules_conf_t /etc/modprobe.d/nofloppy.conf + +# Customize the initramfs +pushd /etc/dracut.conf.d +# Enable VMware PVSCSI support for VMware Fusion guests. +echo 'add_drivers+=" vmw_pvscsi "' > vmware-fusion-drivers.conf +echo 'add_drivers+=" hv_netvsc hv_storvsc hv_utils hv_vmbus hid-hyperv "' > hyperv-drivers.conf +# There's no floppy controller, but probing for it generates timeouts +echo 'omit_drivers+=" floppy "' > nofloppy.conf +popd +# Fix the SELinux context of the new files +restorecon -f - <