Add VMware Vagrant kickstart

README.md

@@ -1,22 +1,53 @@
-**Note**: This repository is mirrored at the [RESF Git Service](https://git.resf.org/sig_core/kickstarts)
-and [Rocky Linux GitHub](https://github.com/rocky-linux/kickstarts)
+# R8 specific kickstarts
 
-This is the kickstarts repository for Rocky Linux. These kickstarts help us
-make a variety of images, such as:
+This branch has Rocky Linux 8 specific kickstarts. These kickstarts vary
+between cloud images and live images provided in our repositories and
+mirrors.
 
-* Live images (eg GNOME/Workstation, XFCE, KDE)
-* Cloud Images (eg EC2, GenericCloud for OpenStack, Azure)
-* Various container images
+## Building Live Images
 
-Each major version gets their own separate branch or branches, depending on the
-nature of the images and where development is for Rocky Linux.
+To build live images, you will need to use `livecd-creator` or
+`livemedia-creator`. The former is simpler to use and generally works without
+many issues. The latter can be a bit more tricky to work with and typically
+runs the installer virtually. However, it can be used without a virtual machine
+like in a mock shell.
 
-If you find that there is an error with a kickstart, there are problems with
-the images produced from these kickstarts, or you have suggestions to fix
-them, please open an issue. You can open an issue or PR at both the
-[RESF Git Service](https://git.resf.org/sig_core/kickstarts) or at our
-[GitHub Organization](https://github.com/rocky-linux/kickstarts)
+### Using livemedia-creator
 
-When opening a PR, please ensure it is against the correct branch.
+To use livemedia-creator without using virt, you can use a mock shell. To
+setup a mock chroot for the purpose of building a live image, you would
+set it up like so:
 
--Release Engineering
+```
+# Install mock if you haven't already
+% dnf install epel-release -y
+% dnf install mock -y
+
+# Add a user to the mock group
+% usermod -a -G mock user
+
+# As the user, setup the mock environment
+% mock -r rocky-8-x86_64 --init
+% mock -r rocky-8-x86_64 --install lorax-lmc-novirt vim-minimal pykickstart git
+# You will need to be in permissive mode temporarily
+% setenforce 0
+# Enter the shell
+% mock -r rocky-8-x86_64 --shell --isolation=simple --enable-network
+
+# Clone the kickstarts and run an installation
+% git clone https://github.com/rocky-linux/kickstarts
+% cd kickstarts
+% livemedia-creator --ks Rocky-8-Workstation.ks \
+  --no-virt \
+  --resultdir /var/lmc \
+  --project="Rocky Linux" \
+  --make-iso \
+  --volid Rocky-Workstation-8 \
+  --iso-only \
+  --iso-name Rocky-Workstation-8-x86_64.iso \
+  --releasever=8 \
+  --nomacboot  # This option is important to set, mkfs.hfsplus is not available
+```
+
+With the example above, all of the results will appear in
+`/var/lib/mock/rocky-8-x86_64/root/var/lmc`.

Rocky-8-Azure.ks

@@ -0,0 +1,306 @@
+text
+url --url http://dl.rockylinux.org/pub/rocky/8/BaseOS/$basearch/os/
+
+auth --enableshadow --passalgo=sha512
+shutdown
+firewall --enabled --service=ssh
+firstboot --disable
+ignoredisk --only-use=vda
+keyboard us
+# System language
+lang en_US.UTF-8
+# Network information
+network  --bootproto=dhcp --device=link --activate --onboot=on
+network  --hostname=localhost.localdomain
+# Root password
+rootpw --iscrypted thereisnopasswordanditslocked
+selinux --enforcing
+services --disabled="kdump" --enabled="NetworkManager,sshd,rsyslog,chronyd,cloud-init,cloud-init-local,cloud-config,cloud-final,rngd"
+timezone UTC --isUtc
+# Disk
+bootloader --append="rootdelay=300 console=ttyS0 earlyprintk=ttyS0  no_timer_check crashkernel=auto net.ifnames=0" --location=mbr --timeout=1 --boot-drive=vda
+zerombr
+clearpart --all --initlabel 
+part /boot --fstype xfs --size 1024 --asprimary --ondisk vda
+part /boot/efi --fstype vfat --size 512 --asprimary --ondisk vda
+reqpart
+part / --fstype="xfs" --ondisk=vda --maxsize=3000 --grow
+
+
+%post --erroronfail
+passwd -d root
+passwd -l root
+
+###
+# Common Cloud Tweaks
+###
+
+# pvgrub support
+echo -n "Creating grub.conf for pvgrub"
+rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
+mkdir /boot/grub
+echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
+for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
+  echo "title Rocky Linux 8 ($kv)" >> /boot/grub/grub.conf
+  echo -e "\troot (hd0)" >> /boot/grub/grub.conf
+  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
+  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
+  echo
+done
+ln -sf grub.conf /boot/grub/menu.lst
+ln -sf /boot/grub/grub.conf /etc/grub.conf
+
+# setup systemd to boot to the right runlevel
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+# remove linux-firmware as we're virt and it's half a gig
+dnf -C -y remove linux-firmware
+
+# Remove firewalld; it is required to be present for install/image building.
+# but we dont ship it in cloud
+dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
+dnf -C -y remove avahi\* 
+sed -i '/^#NAutoVTs=.*/ a\
+NAutoVTs=0' /etc/systemd/logind.conf
+
+echo "virtual-guest" > /etc/tuned/active_profile
+
+###
+# Networking Changes
+###
+
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules
+
+# simple eth0 config, again not hard-coded to the build hardware
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE=eth0
+ONBOOT=yes
+BOOTPROTO=dhcp
+TYPE=Ethernet
+USERCTL=no
+PEERDNS=yes
+IPV6INIT=no
+NM_CONTROLLED=yes
+IPV4_DHCP_TIMEOUT=300
+EOF
+
+cat << EOF | tee -a /etc/NetworkManager/conf.d/dhcp-timeout.conf
+# Configure dhcp timeout to 300s by default
+[connection]
+ipv4.dhcp-timeout=300
+EOF
+
+
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+EOF
+
+# Remove build-time resolvers to fix #16948
+echo > /etc/resolv.conf
+
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+
+###
+# Services
+###
+
+systemctl mask tmp.mount
+
+###
+# azure
+###
+# Setup WALinux Agent
+dnf -y install WALinuxAgent
+systemctl enable waagent
+
+# Configure waagent for cloud-init
+sed -i 's/Provisioning.UseCloudInit=n/Provisioning.UseCloudInit=y/g' /etc/waagent.conf
+sed -i 's/Provisioning.Enabled=y/Provisioning.Enabled=n/g' /etc/waagent.conf
+
+
+
+# Azure: handle sr-iov and networkmanaeger
+cat << EOF | tee -a /etc/udev/rules.d/68-azure-sriov-nm-unmanaged.rules
+# Accelerated Networking on Azure exposes a new SRIOV interface to the VM.
+# This interface is transparently bonded to the synthetic interface,
+# so NetworkManager should just ignore any SRIOV interfaces.
+SUBSYSTEM=="net", DRIVERS=="hv_pci", ACTION=="add", ENV{NM_UNMANAGED}="1"
+EOF
+
+# Azure: Time sync for linux
+## Setup udev rule for ptp_hyperv
+cat << EOF | tee -a /etc/udev/rules.d/98-hyperv-ptp.rules
+## See: https://docs.microsoft.com/en-us/azure/virtual-machines/linux/time-sync#check-for-ptp-clock-source
+SUBSYSTEM=="ptp", ATTR{clock_name}=="hyperv", SYMLINK += "ptp_hyperv"
+EOF
+
+# Configure chrony to use ptp_hyperv
+cat << EOF | tee -a /etc/chrony.conf
+# Setup hyperv PTP device as refclock
+refclock PHC /dev/ptp_hyperv poll 3 dpoll -2 offset 0 stratum 2
+EOF
+
+# Azure: Blacklist modules
+cat << EOF | tee -a /etc/modprobe.d/azure-blacklist.conf
+blacklist amdgpu
+blacklist nouveau
+blacklist radeon
+EOF
+
+# Azure: cloud-init customizations for Hyperv
+cat << EOF | tee /etc/cloud/cloud.cfg.d/10-azure-kvp.cfg
+# Enable logging to the Hyper-V kvp in Azure
+reporting:
+  logging:
+    type: log
+  telemetry:
+    type: hyperv
+EOF
+
+###
+# Kernel and Drivers
+###
+
+# Add drivers when building in VMWare, Vbox, or KVM (KVM)
+cat << EOF | tee -a /etc/dracut.conf.d/80-azure.conf
+add_drivers+=" hv_vmbus hv_netvsc hv_storvsc "
+EOF
+
+dracut -f -v
+
+cat <<EOL > /etc/sysconfig/kernel
+# UPDATEDEFAULT specifies if new-kernel-pkg should make
+# new kernels the default
+UPDATEDEFAULT=yes
+
+# DEFAULTKERNEL specifies the default kernel package type
+DEFAULTKERNEL=kernel
+EOL
+
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
+# rocky cloud user
+echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
+sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
+
+dnf clean all
+
+# XXX instance type markers - MUST match Rocky Infra expectation
+echo 'azure' > /etc/yum/vars/infra
+
+# change dhcp client retry/timeouts to resolve #6866
+
+
+###
+# Cleanup
+###
+
+###
+# Azure Cleanup
+###
+sudo rm -f /var/log/waagent.log
+sudo cloud-init clean
+waagent -force -deprovision+user
+
+
+# Commont cleanup
+rm -f ~/.bash_history
+export HISTSIZE=0
+
+rm -f /var/lib/systemd/random-seed
+rm -rf /root/anaconda-ks.cfg
+rm -rf /root/install.log
+rm -rf /root/install.log.syslog
+rm -rf /var/lib/yum/*
+rm -rf /var/log/anaconda*
+rm -rf /var/log/yum.log
+
+# Wipe machineid
+cat /dev/null > /etc/machine-id
+
+# Fix selinux
+touch /var/log/cron
+touch /var/log/boot.log
+mkdir -p /var/cache/yum
+/usr/sbin/fixfiles -R -a restore
+
+true
+
+%end
+
+%packages
+@core
+chrony
+dnf
+yum
+cloud-init
+cloud-utils-growpart
+NetworkManager
+dracut-config-generic
+dracut-norescue
+firewalld
+gdisk
+grub2
+kernel
+nfs-utils
+rsync
+tar
+dnf-utils
+yum-utils
+-aic94xx-firmware
+-alsa-firmware
+-alsa-lib
+-alsa-tools-firmware
+-ivtv-firmware
+-iwl100-firmware
+-iwl1000-firmware
+-iwl105-firmware
+-iwl135-firmware
+-iwl2000-firmware
+-iwl2030-firmware
+-iwl3160-firmware
+-iwl3945-firmware
+-iwl4965-firmware
+-iwl5000-firmware
+-iwl5150-firmware
+-iwl6000-firmware
+-iwl6000g2a-firmware
+-iwl6000g2b-firmware
+-iwl6050-firmware
+-iwl7260-firmware
+-libertas-sd8686-firmware
+-libertas-sd8787-firmware
+-libertas-usb8388-firmware
+-biosdevname
+-iprutils
+-plymouth
+
+python3-jsonschema
+qemu-guest-agent
+dhcp-client
+cockpit-ws
+cockpit-system
+-langpacks-*
+-langpacks-en
+
+rocky-release
+rng-tools
+
+WALinuxAgent
+hyperv-daemons
+
+%end

Rocky-8-Container-Base.ks

@@ -0,0 +1,98 @@
+# This is a minimal Rocky kickstart designed for docker.
+# It will not produce a bootable system
+# To use this kickstart, run make
+
+# Basic setup information
+url --url https://dl.rockylinux.org/stg/rocky/8/BaseOS/$basearch/os/
+
+text
+bootloader --disable
+firewall --disabled
+network --bootproto=dhcp --device=link --activate --onboot=on
+rootpw --lock --iscrypted locked
+selinux --disabled
+shutdown
+
+keyboard us
+lang en_US.UTF-8
+timezone --isUtc --nontp UTC
+
+# Disk setup
+zerombr
+clearpart --all --initlabel
+autopart --noboot --nohome --noswap --nolvm --fstype=ext4
+
+# Package setup
+%packages --ignoremissing --excludedocs --instLangs=en --nocore --excludeWeakdeps
+bash
+binutils
+coreutils-single
+glibc-minimal-langpack
+hostname
+iputils # this pulls in systemd, lets ask for it by name, too
+less
+systemd
+rocky-release
+rootfiles
+tar
+vim-minimal
+yum
+
+-brotli
+-dosfstools
+-kexec-tools
+-e2fsprogs
+-firewalld
+-fuse-libs
+-gettext*
+-gnupg2-smime
+-grub\*
+-iptables
+-kernel
+-libss
+-os-prober*
+-pinentry
+-qemu-guest-agent
+-shared-mime-info
+-trousers
+-xfsprogs
+-xkeyboard-config
+%end
+
+%post --erroronfail --log=/root/anaconda-post.log
+# container customizations inside the chroot
+
+# Stay compatible
+echo 'container' > /etc/dnf/vars/infra
+
+#Generate installtime file record
+/bin/date +%Y%m%d_%H%M > /etc/BUILDTIME
+
+# Limit languages to help reduce size.
+LANG="en_US"
+echo "%_install_langs $LANG" > /etc/rpm/macros.image-language-conf
+
+# https://bugzilla.redhat.com/show_bug.cgi?id=1727489
+echo 'LANG="C.UTF-8"' >  /etc/locale.conf
+
+# systemd fixes
+:> /etc/machine-id
+umount /run
+systemd-tmpfiles --create --boot
+
+# mask mounts and login bits
+systemctl mask \
+    console-getty.service \
+    dev-hugepages.mount \
+    getty.target \
+    sys-fs-fuse-connections.mount \
+    systemd-logind.service \
+    systemd-remount-fs.service
+
+# Cleanup the image
+rm -f /etc/udev/hwdb.bin
+rm -rf /usr/lib/udev/hwdb.d/ \
+       /boot /var/lib/dnf/history.* \
+       /tmp/* /tmp/.* || true
+
+%end

Rocky-8-Container-Minimal.ks

@@ -0,0 +1,100 @@
+# This is a minimal Rocky kickstart designed for docker.
+# It will not produce a bootable system
+# To use this kickstart, run make
+
+# Basic setup information
+url --url https://dl.rockylinux.org/stg/rocky/8/BaseOS/$basearch/os/
+
+text
+bootloader --disable
+firewall --disabled
+network --bootproto=dhcp --device=link --activate --onboot=on
+rootpw --lock --iscrypted locked
+selinux --disabled
+shutdown
+
+keyboard us
+lang en_US.UTF-8
+timezone --isUtc --nontp UTC
+
+# Disk setup
+zerombr
+clearpart --all --initlabel
+autopart --noboot --nohome --noswap --nolvm --fstype=ext4
+
+# Package setup
+%packages --ignoremissing --excludedocs --instLangs=en --nocore --excludeWeakdeps
+bash
+coreutils-single
+glibc-minimal-langpack
+systemd
+microdnf
+rocky-release
+
+-brotli
+-dosfstools
+-e2fsprogs
+-firewalld
+-fuse-libs
+-gettext*
+-gnupg2-smime
+-grub\*
+-hostname
+-iptables
+-iputils
+-kernel
+-kexec-tools
+-less
+-libss
+-os-prober*
+-pinentry
+-qemu-guest-agent
+-rootfiles
+-shared-mime-info
+-tar
+-trousers
+-vim-minimal
+-xfsprogs
+-xkeyboard-config
+-yum
+%end
+
+%post --erroronfail --log=/root/anaconda-post.log
+# container customizations inside the chroot
+
+
+rpm --rebuilddb
+
+/bin/date +%Y-%m-%d_%H:%M:%S > /etc/BUILDTIME
+
+echo 'container' > /etc/dnf/vars/infra
+
+LANG="en_US"
+echo '%_install_langs en_US.UTF-8' > /etc/rpm/macros.image-language-conf
+echo 'LANG="C.UTF-8"' >  /etc/locale.conf
+
+rm -f /var/lib/dnf/history.* 
+rm -fr "/var/log/*" "/tmp/*" "/tmp/.*"
+
+for dir in $(ls -d "/usr/share/{locale,i18n}/*" | grep -v 'en_US\|all_languages\|locale\.alias'); do rm -fr $dir; done
+
+# systemd fixes
+umount /run
+systemd-tmpfiles --create --boot
+
+# mask mounts and login bits
+systemctl mask \
+    console-getty.service \
+    dev-hugepages.mount \
+    getty.target \
+    sys-fs-fuse-connections.mount \
+    systemd-logind.service \
+    systemd-remount-fs.service
+
+# Cleanup the image
+rm -f /etc/udev/hwdb.bin
+rm -rf /usr/lib/udev/hwdb.d/ \
+       /boot /var/lib/dnf/history.* \
+      "/tmp/*" "/tmp/.*" || true
+
+%end

Rocky-8-Container-UBI.ks

@@ -0,0 +1,101 @@
+# This is a minimal Rocky kickstart designed for docker.
+# It will not produce a bootable system
+# To use this kickstart, run make
+
+# Basic setup information
+url --url https://dl.rockylinux.org/stg/rocky/8/BaseOS/$basearch/os/
+
+text
+bootloader --disable
+firewall --disabled
+network --bootproto=dhcp --device=link --activate --onboot=on
+rootpw --lock --iscrypted locked
+selinux --disabled
+shutdown
+
+keyboard us
+lang en_US.UTF-8
+timezone --isUtc --nontp UTC
+
+# Disk setup
+zerombr
+clearpart --all --initlabel
+autopart --noboot --nohome --noswap --nolvm --fstype=ext4
+
+# Package setup
+%packages --ignoremissing --excludedocs --instLangs=en --nocore --excludeWeakdeps
+bash
+binutils
+brotli
+coreutils-single
+crypto-policies-scripts
+dmidecode
+findutils
+glibc-minimal-langpack
+libcurl
+systemd
+rocky-release
+rootfiles
+tar
+vim-minimal
+which
+yum
+
+
+-dosfstools
+-e2fsprogs
+-firewalld
+-fuse-libs
+-gettext*
+-gnupg2-smime
+-grub\*
+-iptables
+-kernel
+-kexec-tools
+-libss
+-os-prober*
+-pinentry
+-qemu-guest-agent
+-shared-mime-info
+-trousers
+-xfsprogs
+-xkeyboard-config
+%end
+
+%post --erroronfail --log=/root/anaconda-post.log
+# container customizations inside the chroot
+
+# Stay compatible
+echo 'container' > /etc/dnf/vars/infra
+
+#Generate installtime file record
+/bin/date +%Y%m%d_%H%M > /etc/BUILDTIME
+
+# Limit languages to help reduce size.
+LANG="en_US"
+echo "%_install_langs $LANG" > /etc/rpm/macros.image-language-conf
+
+# https://bugzilla.redhat.com/show_bug.cgi?id=1727489
+echo 'LANG="C.UTF-8"' >  /etc/locale.conf
+
+# systemd fixes
+:> /etc/machine-id
+umount /run
+systemd-tmpfiles --create --boot
+
+# mask mounts and login bits
+systemctl mask \
+    console-getty.service \
+    dev-hugepages.mount \
+    getty.target \
+    sys-fs-fuse-connections.mount \
+    systemd-logind.service \
+    systemd-remount-fs.service
+
+# Cleanup the image
+rm -f /etc/udev/hwdb.bin
+rm -rf /usr/lib/udev/hwdb.d/ \
+       /boot /var/lib/dnf/history.* \
+       /tmp/* /tmp/.* || true
+
+%end

Rocky-8-EC2.ks

@@ -0,0 +1,221 @@
+text
+auth --enableshadow --passalgo=sha512
+shutdown
+firewall --enabled --service=ssh
+firstboot --disable
+keyboard us
+# System language
+lang en_US.UTF-8
+# Network information
+network  --bootproto=dhcp --device=link --activate --onboot=on
+network  --hostname=localhost.localdomain
+# Root password
+rootpw --iscrypted thereisnopasswordanditslocked
+selinux --enforcing
+services --disabled="kdump" --enabled="NetworkManager,sshd,rsyslog,chronyd,cloud-init,cloud-init-local,cloud-config,cloud-final,rngd"
+timezone UTC --isUtc
+# Disk
+bootloader --append="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0 nvme_core.io_timeout=4294967295 nvme_core.max_retries=10" --location=mbr --timeout=1 --boot-drive=vda 
+zerombr
+clearpart --all --initlabel 
+reqpart
+part / --fstype="xfs" --ondisk=vda --size=8000 --grow
+
+%pre --erroronfail
+/usr/sbin/parted -s /dev/vda mklabel gpt
+%end
+
+%post --erroronfail
+passwd -d root
+passwd -l root
+
+# pvgrub support
+echo -n "Creating grub.conf for pvgrub"
+rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
+mkdir /boot/grub
+echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
+for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
+  echo "title Rocky Linux 8 ($kv)" >> /boot/grub/grub.conf
+  echo -e "\troot (hd0)" >> /boot/grub/grub.conf
+  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
+  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
+  echo
+done
+ln -sf grub.conf /boot/grub/menu.lst
+ln -sf /boot/grub/grub.conf /etc/grub.conf
+
+# setup systemd to boot to the right runlevel
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+dnf -C -y remove linux-firmware
+
+# Remove firewalld; it is required to be present for install/image building.
+# but we dont ship it in cloud
+dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
+dnf -C -y remove avahi\* 
+sed -i '/^#NAutoVTs=.*/ a\
+NAutoVTs=0' /etc/systemd/logind.conf
+
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+EOF
+
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules
+
+# simple eth0 config, again not hard-coded to the build hardware
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+USERCTL="yes"
+PEERDNS="yes"
+IPV6INIT="no"
+PERSISTENT_DHCLIENT="1"
+EOF
+
+echo "virtual-guest" > /etc/tuned/active_profile
+
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+systemctl mask tmp.mount
+
+cat <<EOL > /etc/sysconfig/kernel
+# UPDATEDEFAULT specifies if new-kernel-pkg should make
+# new kernels the default
+UPDATEDEFAULT=yes
+
+# DEFAULTKERNEL specifies the default kernel package type
+DEFAULTKERNEL=kernel
+EOL
+
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
+# rocky cloud user
+echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
+sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
+
+dnf clean all
+
+# XXX instance type markers - MUST match Rocky Infra expectation
+echo 'ec2' > /etc/yum/vars/infra
+
+# change dhcp client retry/timeouts to resolve #6866
+cat  >> /etc/dhcp/dhclient.conf << EOF
+
+timeout 300;
+retry 60;
+EOF
+
+
+rm -rf /var/log/yum.log
+rm -rf /var/lib/yum/*
+rm -rf /root/install.log
+rm -rf /root/install.log.syslog
+rm -rf /root/anaconda-ks.cfg
+rm -rf /var/log/anaconda*
+
+rm -f /var/lib/systemd/random-seed
+
+cat /dev/null > /etc/machine-id
+
+echo "Fixing SELinux contexts."
+touch /var/log/cron
+touch /var/log/boot.log
+mkdir -p /var/cache/yum
+/usr/sbin/fixfiles -R -a restore
+
+# remove these for ec2 debugging
+sed -i -e 's/ rhgb quiet//' /boot/grub/grub.conf
+
+cat > /etc/modprobe.d/blacklist-nouveau.conf << EOL
+blacklist nouveau
+EOL
+
+# enable resizing on copied AMIs
+echo 'install_items+=" sgdisk "' > /etc/dracut.conf.d/sgdisk.conf
+
+echo 'add_drivers+="xen-netfront xen-blkfront "' > /etc/dracut.conf.d/xen.conf
+# Rerun dracut for the installed kernel (not the running kernel):
+KERNEL_VERSION=$(rpm -q kernel --qf '%{V}-%{R}.%{arch}\n')
+dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION
+
+
+# reorder console entries
+sed -i 's/console=tty0/console=tty0 console=ttyS0,115200n8/' /boot/grub2/grub.cfg
+
+true
+
+%end
+
+%packages
+@core
+chrony
+dnf
+yum
+cloud-init
+cloud-utils-growpart
+NetworkManager
+dracut-config-generic
+dracut-norescue
+firewalld
+gdisk
+grub2
+kernel
+nfs-utils
+rsync
+tar
+dnf-utils
+yum-utils
+-aic94xx-firmware
+-alsa-firmware
+-alsa-lib
+-alsa-tools-firmware
+-ivtv-firmware
+-iwl100-firmware
+-iwl1000-firmware
+-iwl105-firmware
+-iwl135-firmware
+-iwl2000-firmware
+-iwl2030-firmware
+-iwl3160-firmware
+-iwl3945-firmware
+-iwl4965-firmware
+-iwl5000-firmware
+-iwl5150-firmware
+-iwl6000-firmware
+-iwl6000g2a-firmware
+-iwl6000g2b-firmware
+-iwl6050-firmware
+-iwl7260-firmware
+-libertas-sd8686-firmware
+-libertas-sd8787-firmware
+-libertas-usb8388-firmware
+-biosdevname
+-iprutils
+-plymouth
+
+python3-jsonschema
+qemu-guest-agent
+dhcp-client
+cockpit-ws
+cockpit-system
+-langpacks-*
+-langpacks-en
+
+rocky-release
+rng-tools
+%end

Rocky-8-GenericCloud.ks

@@ -0,0 +1,206 @@
+url --url http://dl.rockylinux.org/pub/rocky/8/BaseOS/$basearch/os/
+text
+auth --enableshadow --passalgo=sha512
+shutdown
+firewall --enabled --service=ssh
+firstboot --disable
+ignoredisk --only-use=vda
+keyboard us
+# System language
+lang en_US.UTF-8
+# Network information
+network  --bootproto=dhcp --device=link --activate --onboot=on
+network  --hostname=localhost.localdomain
+# Root password
+rootpw --iscrypted thereisnopasswordanditslocked
+selinux --enforcing
+services --disabled="kdump" --enabled="NetworkManager,sshd,rsyslog,chronyd,cloud-init,cloud-init-local,cloud-config,cloud-final,rngd"
+timezone UTC --isUtc
+# Disk
+bootloader --append="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0" --location=mbr --timeout=1 --boot-drive=vda
+zerombr
+clearpart --all --initlabel 
+reqpart
+part / --fstype="xfs" --ondisk=vda --size=8000 --grow
+
+%post --erroronfail
+passwd -d root
+passwd -l root
+
+# pvgrub support
+echo -n "Creating grub.conf for pvgrub"
+rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
+mkdir /boot/grub
+echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
+for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
+  echo "title Rocky Linux 8 ($kv)" >> /boot/grub/grub.conf
+  echo -e "\troot (hd0)" >> /boot/grub/grub.conf
+  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
+  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
+  echo
+done
+ln -sf grub.conf /boot/grub/menu.lst
+ln -sf /boot/grub/grub.conf /etc/grub.conf
+
+# setup systemd to boot to the right runlevel
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+dnf -C -y remove linux-firmware
+
+# Remove firewalld; it is required to be present for install/image building.
+# but we dont ship it in cloud
+dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
+dnf -C -y remove avahi\* 
+sed -i '/^#NAutoVTs=.*/ a\
+NAutoVTs=0' /etc/systemd/logind.conf
+
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+EOF
+
+# Remove build-time resolvers to fix #16948
+echo > /etc/resolv.conf
+
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules
+
+# simple eth0 config, again not hard-coded to the build hardware
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+USERCTL="yes"
+PEERDNS="yes"
+IPV6INIT="no"
+PERSISTENT_DHCLIENT="1"
+EOF
+
+echo "virtual-guest" > /etc/tuned/active_profile
+
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+systemctl mask tmp.mount
+
+cat <<EOL > /etc/sysconfig/kernel
+# UPDATEDEFAULT specifies if new-kernel-pkg should make
+# new kernels the default
+UPDATEDEFAULT=yes
+
+# DEFAULTKERNEL specifies the default kernel package type
+DEFAULTKERNEL=kernel
+EOL
+
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
+# rocky cloud user
+echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
+sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
+
+dnf clean all
+
+# XXX instance type markers - MUST match Rocky Infra expectation
+echo 'genclo' > /etc/yum/vars/infra
+
+# change dhcp client retry/timeouts to resolve #6866
+cat  >> /etc/dhcp/dhclient.conf << EOF
+
+timeout 300;
+retry 60;
+EOF
+
+
+rm -rf /var/log/yum.log
+rm -rf /var/lib/yum/*
+rm -rf /root/install.log
+rm -rf /root/install.log.syslog
+rm -rf /root/anaconda-ks.cfg
+rm -rf /var/log/anaconda*
+
+rm -f /var/lib/systemd/random-seed
+
+cat /dev/null > /etc/machine-id
+
+echo "Fixing SELinux contexts."
+touch /var/log/cron
+touch /var/log/boot.log
+mkdir -p /var/cache/yum
+/usr/sbin/fixfiles -R -a restore
+
+# reorder console entries
+sed -i 's/console=tty0/console=tty0 console=ttyS0,115200n8/' /boot/grub2/grub.cfg
+
+true
+
+%end
+
+%packages
+@core
+chrony
+dnf
+yum
+cloud-init
+cloud-utils-growpart
+NetworkManager
+dracut-config-generic
+dracut-norescue
+firewalld
+gdisk
+grub2
+kernel
+nfs-utils
+rsync
+tar
+dnf-utils
+yum-utils
+-aic94xx-firmware
+-alsa-firmware
+-alsa-lib
+-alsa-tools-firmware
+-ivtv-firmware
+-iwl100-firmware
+-iwl1000-firmware
+-iwl105-firmware
+-iwl135-firmware
+-iwl2000-firmware
+-iwl2030-firmware
+-iwl3160-firmware
+-iwl3945-firmware
+-iwl4965-firmware
+-iwl5000-firmware
+-iwl5150-firmware
+-iwl6000-firmware
+-iwl6000g2a-firmware
+-iwl6000g2b-firmware
+-iwl6050-firmware
+-iwl7260-firmware
+-libertas-sd8686-firmware
+-libertas-sd8787-firmware
+-libertas-usb8388-firmware
+-biosdevname
+-iprutils
+-plymouth
+
+python3-jsonschema
+qemu-guest-agent
+dhcp-client
+cockpit-ws
+cockpit-system
+-langpacks-*
+-langpacks-en
+
+rocky-release
+rng-tools
+%end

Rocky-8-KDE.ks

@@ -0,0 +1,507 @@
+# Generated by pykickstart v3.32
+#version=DEVEL
+# X Window System configuration information
+xconfig  --startxonboot
+# Keyboard layouts
+keyboard 'us'
+# Root password
+rootpw --iscrypted --lock locked
+# System language
+lang en_US.UTF-8
+# Shutdown after installation
+shutdown
+# Network information
+network  --bootproto=dhcp --device=link --activate
+# Firewall configuration
+firewall --enabled --service=mdns
+# Use network installation
+url --url="http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/"
+repo --name="BaseOS" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/ --cost=200
+repo --name="AppStream" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/AppStream/$basearch/os/ --cost=200
+repo --name="PowerTools" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/PowerTools/$basearch/os/ --cost=200
+repo --name="extras" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/extras/$basearch/os --cost=200
+repo --name="epel" --baseurl=https://dl.fedoraproject.org/pub/epel/8/Everything/$basearch/ --cost=200
+repo --name="epel-modular" --baseurl=https://dl.fedoraproject.org/pub/epel/8/Modular/$basearch/ --cost=200
+# System timezone
+timezone US/Eastern
+# SELinux configuration
+selinux --enforcing
+# System services
+services --disabled="sshd" --enabled="NetworkManager,ModemManager"
+# System bootloader configuration
+bootloader --location=none
+# Clear the Master Boot Record
+zerombr
+# Partition clearing information
+clearpart --all
+# Disk partitioning information
+part / --fstype="ext4" --size=5120
+part / --size=7300
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost-live" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+# set default GTK+ theme for root (see #683855, #689070, #808062)
+cat > /root/.gtkrc-2.0 << EOF
+include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
+include "/etc/gtk-2.0/gtkrc"
+gtk-theme-name="Adwaita"
+EOF
+mkdir -p /root/.config/gtk-3.0
+cat > /root/.config/gtk-3.0/settings.ini << EOF
+[Settings]
+gtk-theme-name = Adwaita
+EOF
+
+# add initscript
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+# are we *not* able to use wayland sessions?
+if strstr "\`cat /proc/cmdline\`" nomodeset ; then
+PLASMA_SESSION_FILE="plasmax11.desktop"
+else
+PLASMA_SESSION_FILE="plasma.desktop"
+fi
+
+# set up autologin for user liveuser
+if [ -f /etc/sddm.conf ]; then
+sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
+sed -i "s/^#Session=.*/Session=\${PLASMA_SESSION_FILE}/" /etc/sddm.conf
+else
+cat > /etc/sddm.conf << SDDM_EOF
+[Autologin]
+User=liveuser
+Session=\${PLASMA_SESSION_FILE}
+SDDM_EOF
+fi
+
+# add liveinst.desktop to favorites menu
+mkdir -p /home/liveuser/.config/
+cat > /home/liveuser/.config/kickoffrc << MENU_EOF
+[Favorites]
+FavoriteURLs=/usr/share/applications/firefox.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
+MENU_EOF
+
+# show liveinst.desktop on desktop and in menu
+sed -i 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+
+# debrand
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+#sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/liveinst.desktop
+
+# set executable bit disable KDE security warning
+chmod +x /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp -a /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
+
+if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop  ]; then
+  mkdir -p ~liveuser/.config/autostart
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+fi
+
+# Set akonadi backend
+mkdir -p /home/liveuser/.config/akonadi
+cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
+[%General]
+Driver=QSQLITE3
+AKONADI_EOF
+
+# Disable plasma-pk-updates if applicable
+rpm -e plasma-pk-updates
+
+# "Disable plasma-discover-notifier"
+mkdir -p /home/liveuser/.config/autostart
+cp -a /etc/xdg/autostart/org.kde.discover.notifier.desktop /home/liveuser/.config/autostart/
+echo 'Hidden=true' >> /home/liveuser/.config/autostart/org.kde.discover.notifier.desktop
+
+# Disable baloo
+cat > /home/liveuser/.config/baloofilerc << BALOO_EOF
+[Basic Settings]
+Indexing-Enabled=false
+BALOO_EOF
+
+mkdir -p ~liveuser/.kde/share/config/
+
+# Disable kres-migrator
+cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
+[Migration]
+Enabled=false
+KRES_EOF
+
+# Disable kwallet migrator
+cat > /home/liveuser/.config/kwalletrc << KWALLET_EOL
+[Migration]
+alreadyMigrated=true
+KWALLET_EOL
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+systemctl enable --force sddm.service
+dnf config-manager --set-enabled powertools
+
+%end
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end
+
+%packages
+@^kde-desktop-environment
+@anaconda-tools
+@base-x
+@core
+@dial-up
+@firefox
+@fonts
+@guest-desktop-agents
+@hardware-support
+@kde-apps
+@kde-media
+@multimedia
+@standard
+aajohan-comfortaa-fonts
+anaconda
+anaconda-install-env-deps
+anaconda-live
+chkconfig
+dracut-live
+epel-release
+fuse
+glibc-all-langpacks
+initscripts
+kernel
+kernel-modules
+kernel-modules-extra
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+mariadb-connector-c
+mariadb-embedded
+mariadb-server
+memtest86+
+sddm
+sddm-themes
+sddm-breeze
+sddm-kcm
+syslinux
+-@admin-tools
+-@input-methods
+-desktop-backgrounds-basic
+-digikam
+-gnome-disk-utility
+-hplip
+-iok
+-isdn4k-utils
+-k3b
+-kdeaccessibility*
+-kipi-plugins
+-krusader
+-ktorrent
+-mpage
+-scim*
+-system-config-printer
+-system-config-services
+-system-config-users
+-xsane
+-xsane-gimp
+
+%end

Rocky-8-Vagrant-Libvirt.ks

@@ -0,0 +1,153 @@
+text
+keyboard --vckeymap us
+lang en_US
+skipx
+network  --bootproto=dhcp --device=link --activate --onboot=on
+rootpw --plaintext vagrant
+firewall --disabled
+timezone --utc UTC
+services --enabled=vmtoolsd
+# The biosdevname and ifnames options ensure we get "eth0" as our interface
+# even in environments like virtualbox that emulate a real NW card
+bootloader --timeout=1 --append="no_timer_check console=tty0 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0 elevator=noop"
+zerombr
+clearpart --all --initlabel
+reqpart
+part / --fstype=xfs --asprimary --size=1024 --grow
+
+user --name=vagrant --plaintext --password=vagrant
+
+shutdown
+
+%packages --instLangs=en
+bash-completion
+man-pages
+bzip2
+rsync
+nfs-utils
+cifs-utils
+chrony
+yum-utils
+hyperv-daemons
+open-vm-tools
+# Vagrant boxes aren't normally visible, no need for Plymouth
+-plymouth
+# Microcode updates cannot work in a VM
+-microcode_ctl
+# Firmware packages are not needed in a VM
+-iwl100-firmware
+-iwl1000-firmware
+-iwl105-firmware
+-iwl135-firmware
+-iwl2000-firmware
+-iwl2030-firmware
+-iwl3160-firmware
+-iwl3945-firmware
+-iwl4965-firmware
+-iwl5000-firmware
+-iwl5150-firmware
+-iwl6000-firmware
+-iwl6000g2a-firmware
+-iwl6050-firmware
+-iwl7260-firmware
+# Don't build rescue initramfs
+-dracut-config-rescue
+%end
+
+# kdump needs to reserve 160MB + 2bits/4kB RAM, and automatic allocation only
+# works on systems with at least 2GB RAM (which excludes most Vagrant boxes)
+# CBS doesn't support %addon yet https://bugs.centos.org/view.php?id=12169
+%addon com_redhat_kdump --disable
+%end
+
+%post
+# configure swap to a file
+fallocate -l 2G /swapfile
+chmod 600 /swapfile
+mkswap /swapfile
+echo "/swapfile none swap defaults 0 0" >> /etc/fstab
+
+# sudo
+echo "%vagrant ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/vagrant
+chmod 0440 /etc/sudoers.d/vagrant
+
+# Fix for https://github.com/CentOS/sig-cloud-instance-build/issues/38
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
+
+# sshd: disable password authentication and DNS checks
+ex -s /etc/ssh/sshd_config <<EOF
+:%substitute/^\(PasswordAuthentication\) yes$/\1 no/
+:%substitute/^#\(UseDNS\) yes$/&\r\1 no/
+:update
+:quit
+EOF
+cat >>/etc/sysconfig/sshd <<EOF
+
+# Decrease connection time by preventing reverse DNS lookups
+# (see https://lists.centos.org/pipermail/centos-devel/2016-July/014981.html
+#  and man sshd for more information)
+OPTIONS="-u0"
+EOF
+
+# Default insecure vagrant key
+mkdir -m 0700 -p /home/vagrant/.ssh
+echo "ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key" >> /home/vagrant/.ssh/authorized_keys
+chmod 600 /home/vagrant/.ssh/authorized_keys
+chown -R vagrant:vagrant /home/vagrant/.ssh
+
+# Fix for issue #76, regular users can gain admin privileges via su
+ex -s /etc/pam.d/su <<'EOF'
+# allow vagrant to use su, but prevent others from becoming root or vagrant
+/^account\s\+sufficient\s\+pam_succeed_if.so uid = 0 use_uid quiet$/
+:append
+account		[success=1 default=ignore] \\
+				pam_succeed_if.so user = vagrant use_uid quiet
+account		required	pam_succeed_if.so user notin root:vagrant
+.
+:update
+:quit
+EOF
+
+# systemd should generate a new machine id during the first boot, to
+# avoid having multiple Vagrant instances with the same id in the local
+# network. /etc/machine-id should be empty, but it must exist to prevent
+# boot errors (e.g.  systemd-journald failing to start).
+:>/etc/machine-id
+
+echo 'vag' > /etc/yum/vars/infra
+
+# Blacklist the floppy module to avoid probing timeouts
+echo blacklist floppy > /etc/modprobe.d/nofloppy.conf
+chcon -u system_u -r object_r -t modules_conf_t /etc/modprobe.d/nofloppy.conf
+
+# Customize the initramfs
+pushd /etc/dracut.conf.d
+# Enable VMware PVSCSI support for VMware Fusion guests.
+echo 'add_drivers+=" vmw_pvscsi "' > vmware-fusion-drivers.conf
+echo 'add_drivers+=" hv_netvsc hv_storvsc hv_utils hv_vmbus hid-hyperv "' > hyperv-drivers.conf
+# There's no floppy controller, but probing for it generates timeouts
+echo 'omit_drivers+=" floppy "' > nofloppy.conf
+popd
+# Fix the SELinux context of the new files
+restorecon -f - <<EOF
+/etc/sudoers.d/vagrant
+/etc/dracut.conf.d/vmware-fusion-drivers.conf
+/etc/dracut.conf.d/hyperv-drivers.conf
+/etc/dracut.conf.d/nofloppy.conf
+EOF
+
+# Rerun dracut for the installed kernel (not the running kernel):
+KERNEL_VERSION=$(rpm -q kernel --qf '%{version}-%{release}.%{arch}\n')
+dracut -f /boot/initramfs-${KERNEL_VERSION}.img ${KERNEL_VERSION}
+
+# Seal for deployment
+rm -rf /etc/ssh/ssh_host_*
+hostnamectl set-hostname localhost.localdomain
+rm -rf /etc/udev/rules.d/70-*
+%end

Rocky-8-Vagrant-VMware.ks

@@ -0,0 +1,151 @@
+text
+keyboard --vckeymap us
+lang en_US
+skipx
+network  --bootproto=dhcp --device=link --activate --onboot=on
+rootpw --plaintext vagrant
+firewall --disabled
+timezone --utc UTC
+services --enabled=vmtoolsd
+# The biosdevname and ifnames options ensure we get "eth0" as our interface
+# even in environments like virtualbox that emulate a real NW card
+bootloader --timeout=1 --append="no_timer_check console=tty0 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0 elevator=noop"
+zerombr
+clearpart --all --initlabel
+reqpart
+part / --fstype=xfs --asprimary --size=1024 --grow
+
+user --name=vagrant --plaintext --password=vagrant
+
+shutdown
+
+%packages --instLangs=en
+bash-completion
+man-pages
+bzip2
+rsync
+nfs-utils
+cifs-utils
+chrony
+yum-utils
+open-vm-tools
+# Vagrant boxes aren't normally visible, no need for Plymouth
+-plymouth
+# Microcode updates cannot work in a VM
+-microcode_ctl
+# Firmware packages are not needed in a VM
+-iwl100-firmware
+-iwl1000-firmware
+-iwl105-firmware
+-iwl135-firmware
+-iwl2000-firmware
+-iwl2030-firmware
+-iwl3160-firmware
+-iwl3945-firmware
+-iwl4965-firmware
+-iwl5000-firmware
+-iwl5150-firmware
+-iwl6000-firmware
+-iwl6000g2a-firmware
+-iwl6050-firmware
+-iwl7260-firmware
+# Don't build rescue initramfs
+-dracut-config-rescue
+%end
+
+# kdump needs to reserve 160MB + 2bits/4kB RAM, and automatic allocation only
+# works on systems with at least 2GB RAM (which excludes most Vagrant boxes)
+# CBS doesn't support %addon yet https://bugs.centos.org/view.php?id=12169
+%addon com_redhat_kdump --disable
+%end
+
+%post
+# configure swap to a file
+fallocate -l 2G /swapfile
+chmod 600 /swapfile
+mkswap /swapfile
+echo "/swapfile none swap defaults 0 0" >> /etc/fstab
+
+# sudo
+echo "%vagrant ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/vagrant
+chmod 0440 /etc/sudoers.d/vagrant
+
+# Fix for https://github.com/CentOS/sig-cloud-instance-build/issues/38
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
+
+# sshd: disable password authentication and DNS checks
+ex -s /etc/ssh/sshd_config <<EOF
+:%substitute/^\(PasswordAuthentication\) yes$/\1 no/
+:%substitute/^#\(UseDNS\) yes$/&\r\1 no/
+:update
+:quit
+EOF
+cat >>/etc/sysconfig/sshd <<EOF
+
+# Decrease connection time by preventing reverse DNS lookups
+# (see https://lists.centos.org/pipermail/centos-devel/2016-July/014981.html
+#  and man sshd for more information)
+OPTIONS="-u0"
+EOF
+
+# Default insecure vagrant key
+mkdir -m 0700 -p /home/vagrant/.ssh
+echo "ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key" >> /home/vagrant/.ssh/authorized_keys
+chmod 600 /home/vagrant/.ssh/authorized_keys
+chown -R vagrant:vagrant /home/vagrant/.ssh
+
+# Fix for issue #76, regular users can gain admin privileges via su
+ex -s /etc/pam.d/su <<'EOF'
+# allow vagrant to use su, but prevent others from becoming root or vagrant
+/^account\s\+sufficient\s\+pam_succeed_if.so uid = 0 use_uid quiet$/
+:append
+account		[success=1 default=ignore] \\
+				pam_succeed_if.so user = vagrant use_uid quiet
+account		required	pam_succeed_if.so user notin root:vagrant
+.
+:update
+:quit
+EOF
+
+# systemd should generate a new machine id during the first boot, to
+# avoid having multiple Vagrant instances with the same id in the local
+# network. /etc/machine-id should be empty, but it must exist to prevent
+# boot errors (e.g.  systemd-journald failing to start).
+:>/etc/machine-id
+
+echo 'vag' > /etc/yum/vars/infra
+
+# Blacklist the floppy module to avoid probing timeouts
+echo blacklist floppy > /etc/modprobe.d/nofloppy.conf
+chcon -u system_u -r object_r -t modules_conf_t /etc/modprobe.d/nofloppy.conf
+
+# Customize the initramfs
+pushd /etc/dracut.conf.d
+# Enable VMware PVSCSI support for VMware Fusion guests.
+echo 'add_drivers+=" vmw_pvscsi "' > vmware-fusion-drivers.conf
+echo 'add_drivers+=" hv_netvsc hv_storvsc hv_utils hv_vmbus hid-hyperv "' > hyperv-drivers.conf
+# There's no floppy controller, but probing for it generates timeouts
+echo 'omit_drivers+=" floppy "' > nofloppy.conf
+popd
+# Fix the SELinux context of the new files
+restorecon -f - <<EOF
+/etc/sudoers.d/vagrant
+/etc/dracut.conf.d/vmware-fusion-drivers.conf
+/etc/dracut.conf.d/nofloppy.conf
+EOF
+
+# Rerun dracut for the installed kernel (not the running kernel):
+KERNEL_VERSION=$(rpm -q kernel --qf '%{version}-%{release}.%{arch}\n')
+dracut -f /boot/initramfs-${KERNEL_VERSION}.img ${KERNEL_VERSION}
+
+# Seal for deployment
+rm -rf /etc/ssh/ssh_host_*
+hostnamectl set-hostname localhost.localdomain
+rm -rf /etc/udev/rules.d/70-*
+%end

Rocky-8-Vagrant-Vbox.ks

@@ -0,0 +1,149 @@
+url --url=http://dl.rockylinux.org/pub/rocky/8/BaseOS/x86_64/os
+repo --name=AppStream --baseurl=http://dl.rockylinux.org/pub/rocky/8/AppStream/x86_64/os
+text
+keyboard --vckeymap us
+lang en_US
+skipx
+network  --bootproto=dhcp --device=link --activate --onboot=on
+rootpw --plaintext vagrant
+firewall --disabled
+timezone --utc UTC
+services --enabled=vmtoolsd
+# The biosdevname and ifnames options ensure we get "eth0" as our interface
+# even in environments like virtualbox that emulate a real NW card
+bootloader --timeout=1 --append="no_timer_check console=tty0 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0 elevator=noop"
+zerombr
+clearpart --all --initlabel
+reqpart
+part / --fstype=xfs --asprimary --size=1024 --grow
+
+user --name=vagrant --plaintext --password=vagrant
+
+reboot
+
+%packages --instLangs=en
+bash-completion
+man-pages
+bzip2
+rsync
+nfs-utils
+cifs-utils
+chrony
+yum-utils
+hyperv-daemons
+open-vm-tools
+# Vagrant boxes aren't normally visible, no need for Plymouth
+-plymouth
+# Microcode updates cannot work in a VM
+-microcode_ctl
+# Firmware packages are not needed in a VM
+-iwl100-firmware
+-iwl1000-firmware
+-iwl105-firmware
+-iwl135-firmware
+-iwl2000-firmware
+-iwl2030-firmware
+-iwl3160-firmware
+-iwl3945-firmware
+-iwl4965-firmware
+-iwl5000-firmware
+-iwl5150-firmware
+-iwl6000-firmware
+-iwl6000g2a-firmware
+-iwl6050-firmware
+-iwl7260-firmware
+# Don't build rescue initramfs
+-dracut-config-rescue
+%end
+
+# kdump needs to reserve 160MB + 2bits/4kB RAM, and automatic allocation only
+# works on systems with at least 2GB RAM (which excludes most Vagrant boxes)
+# CBS doesn't support %addon yet https://bugs.centos.org/view.php?id=12169
+%addon com_redhat_kdump --disable
+%end
+
+%post
+# configure swap to a file
+fallocate -l 2G /swapfile
+chmod 600 /swapfile
+mkswap /swapfile
+echo "/swapfile none swap defaults 0 0" >> /etc/fstab
+
+# sudo
+echo "%vagrant ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/vagrant
+chmod 0440 /etc/sudoers.d/vagrant
+
+# Fix for https://github.com/CentOS/sig-cloud-instance-build/issues/38
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
+
+# sshd: disable password authentication and DNS checks
+# for virtualbox we're disabling it after provisioning
+
+# Decrease connection time by preventing reverse DNS lookups
+# (see https://lists.centos.org/pipermail/centos-devel/2016-July/014981.html
+#  and man sshd for more information)
+OPTIONS="-u0"
+EOF
+
+# Default insecure vagrant key
+mkdir -m 0700 -p /home/vagrant/.ssh
+echo "ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key" >> /home/vagrant/.ssh/authorized_keys
+chmod 600 /home/vagrant/.ssh/authorized_keys
+chown -R vagrant:vagrant /home/vagrant/.ssh
+
+# Fix for issue #76, regular users can gain admin privileges via su
+ex -s /etc/pam.d/su <<'EOF'
+# allow vagrant to use su, but prevent others from becoming root or vagrant
+/^account\s\+sufficient\s\+pam_succeed_if.so uid = 0 use_uid quiet$/
+:append
+account		[success=1 default=ignore] \\
+				pam_succeed_if.so user = vagrant use_uid quiet
+account		required	pam_succeed_if.so user notin root:vagrant
+.
+:update
+:quit
+EOF
+
+# systemd should generate a new machine id during the first boot, to
+# avoid having multiple Vagrant instances with the same id in the local
+# network. /etc/machine-id should be empty, but it must exist to prevent
+# boot errors (e.g.  systemd-journald failing to start).
+:>/etc/machine-id
+
+echo 'vag' > /etc/yum/vars/infra
+
+# Blacklist the floppy module to avoid probing timeouts
+echo blacklist floppy > /etc/modprobe.d/nofloppy.conf
+chcon -u system_u -r object_r -t modules_conf_t /etc/modprobe.d/nofloppy.conf
+
+# Customize the initramfs
+pushd /etc/dracut.conf.d
+# Enable VMware PVSCSI support for VMware Fusion guests.
+echo 'add_drivers+=" vmw_pvscsi "' > vmware-fusion-drivers.conf
+echo 'add_drivers+=" hv_netvsc hv_storvsc hv_utils hv_vmbus hid-hyperv "' > hyperv-drivers.conf
+# There's no floppy controller, but probing for it generates timeouts
+echo 'omit_drivers+=" floppy "' > nofloppy.conf
+popd
+# Fix the SELinux context of the new files
+restorecon -f - <<EOF
+/etc/sudoers.d/vagrant
+/etc/dracut.conf.d/vmware-fusion-drivers.conf
+/etc/dracut.conf.d/hyperv-drivers.conf
+/etc/dracut.conf.d/nofloppy.conf
+EOF
+
+# Rerun dracut for the installed kernel (not the running kernel):
+KERNEL_VERSION=$(rpm -q kernel --qf '%{version}-%{release}.%{arch}\n')
+dracut -f /boot/initramfs-${KERNEL_VERSION}.img ${KERNEL_VERSION}
+
+# Seal for deployment
+rm -rf /etc/ssh/ssh_host_*
+hostnamectl set-hostname localhost.localdomain
+rm -rf /etc/udev/rules.d/70-*
+%end

Rocky-8-Workstation-Lite.ks

@@ -0,0 +1,455 @@
+# Generated by pykickstart v3.32
+#version=DEVEL
+# X Window System configuration information
+xconfig  --startxonboot
+# Keyboard layouts
+keyboard 'us'
+# Root password
+rootpw --iscrypted --lock locked
+# System language
+lang en_US.UTF-8
+# Shutdown after installation
+shutdown
+# Network information
+network  --bootproto=dhcp --device=link --activate
+# Firewall configuration
+firewall --enabled --service=mdns
+# Use network installation
+url --url="http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/"
+repo --name="BaseOS" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/ --cost=200
+repo --name="AppStream" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/AppStream/$basearch/os/ --cost=200
+repo --name="PowerTools" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/PowerTools/$basearch/os/ --cost=200
+repo --name="extras" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/extras/$basearch/os --cost=200
+# System timezone
+timezone US/Eastern
+# SELinux configuration
+selinux --enforcing
+# System services
+services --disabled="sshd" --enabled="NetworkManager,ModemManager"
+# System bootloader configuration
+bootloader --location=none
+# Clear the Master Boot Record
+zerombr
+# Partition clearing information
+clearpart --all
+# Disk partitioning information
+part / --fstype="ext4" --size=5120
+part / --size=6656
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost-live" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable gnome-software automatically downloading updates
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't autostart gnome-software session service
+rm -f /etc/xdg/autostart/gnome-software-service.desktop
+
+# disable the gnome-software shell search provider
+cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
+DefaultDisabled=true
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# suppress anaconda spokes redundant with gnome-initial-setup
+cat >> /etc/sysconfig/anaconda << FOE
+[NetworkSpoke]
+visited=1
+
+[PasswordSpoke]
+visited=1
+
+[UserSpoke]
+visited=1
+FOE
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+    #sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/anaconda.desktop
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+  fi
+
+  # Copy Anaconda branding in place
+  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
+    cp -a /usr/share/lorax/product/* /
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+%end
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# This only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end
+
+%packages
+@anaconda-tools
+@base-x
+@core
+@fonts
+@gnome-desktop
+@guest-desktop-agents
+@hardware-support
+@internet-browser
+@networkmanager-submodules
+aajohan-comfortaa-fonts
+anaconda
+anaconda-install-env-deps
+anaconda-live
+chkconfig
+dracut-live
+glibc-all-langpacks
+initscripts
+kernel
+kernel-modules
+kernel-modules-extra
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+memtest86+
+syslinux
+-@dial-up
+-@input-methods
+-@standard
+-gfs2-utils
+-reiserfs-utils
+
+%end

Rocky-8-Workstation-Mainline.ks

@@ -0,0 +1,470 @@
+# Generated by pykickstart v3.34
+#version=RHEL8
+# X Window System configuration information
+xconfig  --startxonboot
+# Keyboard layouts
+keyboard 'us'
+# Root password
+rootpw --iscrypted --lock locked
+# System language
+lang en_US.UTF-8
+# Shutdown after installation
+shutdown
+# System timezone
+timezone US/Eastern
+# Network information
+network  --bootproto=dhcp --device=link --activate
+# Firewall configuration
+firewall --enabled --service=mdns
+# SELinux configuration
+selinux --enforcing
+
+# System services
+services --disabled="sshd" --enabled="NetworkManager,ModemManager"
+repo --name="BaseOS" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/ --cost=200
+repo --name="AppStream" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/AppStream/$basearch/os/ --cost=200
+repo --name="PowerTools" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/PowerTools/$basearch/os/ --cost=200
+repo --name="extras" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/extras/$basearch/os --cost=200
+repo --name="elrepo-kernel" --baseurl=https://elrepo.org/linux/kernel/el8/$basearch/ --cost=200
+# Use network installation
+url --url="http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/"
+# System bootloader configuration
+bootloader --location=none
+# Clear the Master Boot Record
+zerombr
+# Partition clearing information
+clearpart --all
+# Disk partitioning information
+part / --fstype="ext4" --size=5120
+part / --size=6656
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+%end
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# This only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end
+
+%post
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable gnome-software automatically downloading updates
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't autostart gnome-software session service
+rm -f /etc/xdg/autostart/gnome-software-service.desktop
+
+# disable the gnome-software shell search provider
+cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
+DefaultDisabled=true
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# suppress anaconda spokes redundant with gnome-initial-setup
+cat >> /etc/sysconfig/anaconda << FOE
+[NetworkSpoke]
+visited=1
+
+[PasswordSpoke]
+visited=1
+
+[UserSpoke]
+visited=1
+FOE
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  #sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+    #sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/anaconda.desktop
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+  fi
+
+  # Copy Anaconda branding in place
+  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
+    cp -a /usr/share/lorax/product/* /
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# switch default kernel
+sed -i 's/DEFAULTKERNEL=kernel/DEFAULTKERNEL=kernel-ml/g' /etc/sysconfig/kernel
+
+# enable elrepo kernel
+dnf config-manager --set-enabled elrepo-kernel
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+%end
+
+%packages
+@anaconda-tools
+@base-x
+@core
+@fonts
+@gnome-desktop
+@guest-desktop-agents
+@hardware-support
+@internet-browser
+@multimedia
+@networkmanager-submodules
+@workstation-product
+aajohan-comfortaa-fonts
+anaconda
+anaconda-install-env-deps
+anaconda-live
+chkconfig
+dracut-live
+elrepo-release
+glibc-all-langpacks
+initscripts
+kernel-ml
+kernel-ml-modules
+kernel-ml-modules-extra
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+memtest86+
+syslinux
+-@dial-up
+-@input-methods
+-@standard
+-gfs2-utils
+-reiserfs-utils
+
+%end

Rocky-8-Workstation.ks

@@ -0,0 +1,457 @@
+# Generated by pykickstart v3.32
+#version=DEVEL
+# X Window System configuration information
+xconfig  --startxonboot
+# Keyboard layouts
+keyboard 'us'
+# Root password
+rootpw --iscrypted --lock locked
+# System language
+lang en_US.UTF-8
+# Shutdown after installation
+shutdown
+# Network information
+network  --bootproto=dhcp --device=link --activate
+# Firewall configuration
+firewall --enabled --service=mdns
+# Use network installation
+url --url="http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/"
+repo --name="BaseOS" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/ --cost=200
+repo --name="AppStream" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/AppStream/$basearch/os/ --cost=200
+repo --name="PowerTools" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/PowerTools/$basearch/os/ --cost=200
+repo --name="extras" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/extras/$basearch/os --cost=200
+# System timezone
+timezone US/Eastern
+# SELinux configuration
+selinux --enforcing
+# System services
+services --disabled="sshd" --enabled="NetworkManager,ModemManager"
+# System bootloader configuration
+bootloader --location=none
+# Clear the Master Boot Record
+zerombr
+# Partition clearing information
+clearpart --all
+# Disk partitioning information
+part / --fstype="ext4" --size=5120
+part / --size=6656
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost-live" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable gnome-software automatically downloading updates
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't autostart gnome-software session service
+rm -f /etc/xdg/autostart/gnome-software-service.desktop
+
+# disable the gnome-software shell search provider
+cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
+DefaultDisabled=true
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# suppress anaconda spokes redundant with gnome-initial-setup
+cat >> /etc/sysconfig/anaconda << FOE
+[NetworkSpoke]
+visited=1
+
+[PasswordSpoke]
+visited=1
+
+[UserSpoke]
+visited=1
+FOE
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+    #sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/anaconda.desktop
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+  fi
+
+  # Copy Anaconda branding in place
+  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
+    cp -a /usr/share/lorax/product/* /
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+%end
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# This only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end
+
+%packages
+@anaconda-tools
+@base-x
+@core
+@fonts
+@gnome-desktop
+@guest-desktop-agents
+@hardware-support
+@internet-browser
+@multimedia
+@networkmanager-submodules
+@workstation-product
+aajohan-comfortaa-fonts
+anaconda
+anaconda-install-env-deps
+anaconda-live
+chkconfig
+dracut-live
+glibc-all-langpacks
+initscripts
+kernel
+kernel-modules
+kernel-modules-extra
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+memtest86+
+syslinux
+-@dial-up
+-@input-methods
+-@standard
+-gfs2-utils
+-reiserfs-utils
+
+%end

Rocky-8-XFCE.ks

@@ -0,0 +1,500 @@
+# Generated by pykickstart v3.32
+#version=DEVEL
+# X Window System configuration information
+xconfig  --startxonboot
+# Keyboard layouts
+keyboard 'us'
+# Root password
+rootpw --iscrypted --lock locked
+# System language
+lang en_US.UTF-8
+# Shutdown after installation
+shutdown
+# Network information
+network  --bootproto=dhcp --device=link --activate
+# Firewall configuration
+firewall --enabled --service=mdns
+# Use network installation
+url --url="http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/"
+repo --name="BaseOS" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/ --cost=200
+repo --name="AppStream" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/AppStream/$basearch/os/ --cost=200
+repo --name="PowerTools" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/PowerTools/$basearch/os/ --cost=200
+repo --name="extras" --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/extras/$basearch/os --cost=200
+repo --name="epel" --baseurl=https://dl.fedoraproject.org/pub/epel/8/Everything/$basearch/ --cost=200
+repo --name="epel-modular" --baseurl=https://dl.fedoraproject.org/pub/epel/8/Modular/$basearch/ --cost=200
+# System timezone
+timezone US/Eastern
+# SELinux configuration
+selinux --enforcing
+# System services
+services --disabled="sshd" --enabled="NetworkManager,ModemManager"
+# System bootloader configuration
+bootloader --location=none
+# Clear the Master Boot Record
+zerombr
+# Partition clearing information
+clearpart --all
+# Disk partitioning information
+part / --fstype="ext4" --size=5120
+part / --size=6144
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost-live" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+# xfce configuration
+
+# create /etc/sysconfig/desktop (needed for installation)
+
+cat > /etc/sysconfig/desktop <<EOF
+PREFERRED=/usr/bin/startxfce4
+DISPLAYMANAGER=/usr/sbin/lightdm
+EOF
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+mkdir -p /home/liveuser/.config/xfce4
+# ugly stuff, this should give us a default background for now
+mkdir -p /usr/share/backgrounds/images
+ln -s /usr/share/backgrounds/f32/default/f32.png \
+  /usr/share/backgrounds/images/default.png
+
+cat > /home/liveuser/.config/xfce4/helpers.rc << FOE
+MailReader=sylpheed-claws
+FileManager=Thunar
+WebBrowser=firefox
+FOE
+
+# disable screensaver locking (#674410)
+cat >> /home/liveuser/.xscreensaver << FOE
+mode:           off
+lock:           False
+dpmsEnabled:    False
+FOE
+
+# deactivate xfconf-migration (#683161)
+rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
+
+# deactivate xfce4-panel first-run dialog (#693569)
+mkdir -p /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml
+cp /etc/xdg/xfce4/panel/default.xml /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
+
+# set up lightdm autologin
+sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
+sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
+sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
+
+# set Xfce as default session, otherwise login will fail
+sed -i 's/^#user-session=.*/user-session=xfce/' /etc/lightdm/lightdm.conf
+
+# debrand
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+#sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/liveinst.desktop
+
+# Show harddisk install on the desktop
+sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
+
+# no updater applet in live environment
+rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
+
+if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop ]; then
+  mkdir -p ~liveuser/.config/autostart
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+fi
+
+# and mark it as executable (new Xfce security feature)
+chmod +x /home/liveuser/Desktop/liveinst.desktop
+
+# move to anaconda - probably not required for XFCE.
+mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+# this goes at the end after all other changes. 
+chown -R liveuser:liveuser /home/liveuser
+restorecon -R /home/liveuser
+
+EOF
+
+# this doesn't come up automatically. not sure why.
+systemctl enable --force lightdm.service
+dnf config-manager --set-enabled powertools
+
+%end
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end
+
+%packages
+@anaconda-tools
+@base-x
+@core
+@dial-up
+@fonts
+@guest-desktop-agents
+@hardware-support
+@input-methods
+@multimedia
+@standard
+@xfce-desktop
+aajohan-comfortaa-fonts
+anaconda
+anaconda-install-env-deps
+anaconda-live
+chkconfig
+dracut-live
+epel-release
+f32-backgrounds-extras-xfce
+f32-backgrounds-xfce
+firefox
+firewall-config
+geany
+glibc-all-langpacks
+gparted
+initscripts
+kernel
+kernel-modules
+kernel-modules-extra
+memtest86+
+mousepad
+pavucontrol
+pcp-selinux
+pidgin
+rhythmbox
+ristretto
+rocky-backgrounds
+lightdm
+seahorse
+syslinux
+thunderbird
+transmission
+wget
+xfce4-about
+xfce4-appfinder
+xfce4-battery-plugin
+xfce4-datetime-plugin
+xfce4-netload-plugin
+xfce4-places-plugin
+xfce4-pulseaudio-plugin
+xfce4-screenshooter-plugin
+xfce4-smartbookmark-plugin
+xfce4-systemload-plugin
+xfce4-taskmanager
+xfce4-time-out-plugin
+xfce4-weather-plugin
+xfce4-whiskermenu-plugin
+xfdashboard
+xfdashboard-themes
+xdg-user-dirs
+xdg-user-dirs-gtk
+-acpid
+-aspell-*
+-autofs
+-desktop-backgrounds-basic
+-gdm
+-gimp-help
+-gnome-menus
+-gnome-shell
+-hplip
+-isdn4k-utils
+-mpage
+-sane-backends
+-xfce4-eyes-plugin
+-xfce4-sensors-plugin
+-xsane
+-xsane-gimp
+
+%end
+

live/8/prod/mainline/rocky-live-base.ks

@@ -0,0 +1,356 @@
+# rocky-live-base.ks
+#
+# Base installation information for Rocky Linux images
+#
+
+lang en_US.UTF-8
+keyboard us
+timezone US/Eastern
+auth --useshadow --passalgo=sha512
+selinux --enforcing
+firewall --enabled --service=mdns
+xconfig --startxonboot
+zerombr
+clearpart --all
+part / --size 5120 --fstype ext4
+services --enabled=NetworkManager,ModemManager --disabled=sshd
+network --bootproto=dhcp --device=link --activate
+rootpw --lock --iscrypted locked
+shutdown
+
+%include rocky-repo-mainline.ks
+
+%packages
+@base-x
+@guest-desktop-agents
+@standard
+@core
+@fonts
+@input-methods
+@dial-up
+@multimedia
+@hardware-support
+
+# explicit
+elrepo-release
+kernel-ml
+kernel-ml-modules
+kernel-ml-modules-extra
+memtest86+
+anaconda
+anaconda-install-env-deps
+anaconda-live
+@anaconda-tools
+
+# Required for SVG rnotes images
+aajohan-comfortaa-fonts
+
+# RHBZ#1242586 - Required for initramfs creation
+dracut-live
+syslinux
+
+# Anaconda needs all the locales available, just like a DVD installer
+glibc-all-langpacks
+
+# This isn't in @core anymore, but livesys still needs it
+initscripts
+chkconfig
+%end
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+%end
+
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# This only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end

live/8/prod/mainline/rocky-live-workstation.ks

@@ -0,0 +1,107 @@
+# Maintained by Release Engineering
+# mailto:releng@rockylinux.org
+
+%include rocky-live-base.ks
+%include rocky-workstation-common.ks
+#
+# Disable this for now as packagekit is causing compose failures
+# by leaving a gpg-agent around holding /dev/null open.
+#
+#include snippets/packagekit-cached-metadata.ks
+
+part / --size 6656
+
+%post
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable gnome-software automatically downloading updates
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't autostart gnome-software session service
+rm -f /etc/xdg/autostart/gnome-software-service.desktop
+
+# disable the gnome-software shell search provider
+cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
+DefaultDisabled=true
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# suppress anaconda spokes redundant with gnome-initial-setup
+cat >> /etc/sysconfig/anaconda << FOE
+[NetworkSpoke]
+visited=1
+
+[PasswordSpoke]
+visited=1
+
+[UserSpoke]
+visited=1
+FOE
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+    #sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/anaconda.desktop
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+  fi
+
+  # Copy Anaconda branding in place
+  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
+    cp -a /usr/share/lorax/product/* /
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# switch default kernel
+sed -i 's/DEFAULTKERNEL=kernel/DEFAULTKERNEL=kernel-ml/g' /etc/sysconfig/kernel
+
+# enable elrepo kernel
+dnf config-manager --set-enabled elrepo-kernel
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+%end

live/8/prod/mainline/rocky-repo-mainline.ks

@@ -0,0 +1,14 @@
+# These should change based on the major/minor release
+
+# Deps repo, there are some anaconda packages that are *not* available by default
+repo --name=BaseOS --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/
+repo --name=AppStream --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/AppStream/$basearch/os/
+repo --name=PowerTools --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/PowerTools/$basearch/os/
+repo --name=extras --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/extras/$basearch/os
+
+# ELRepo
+repo --name="elrepo-kernel" --baseurl=https://elrepo.org/linux/kernel/el8/$basearch/ --cost=200
+
+# URL to the base os repo
+url --url=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/
+#url --url=http://10.100.0.1/pub/deps

live/8/prod/mainline/rocky-workstation-common.ks

@@ -0,0 +1,32 @@
+%packages
+
+# Exclude unwanted groups that rocky-live-base.ks pulls in
+-@dial-up
+-@input-methods
+-@standard
+
+# Make sure to sync any additions / removals done here with
+# workstation-product-environment in comps
+@base-x
+@core
+@fonts
+@gnome-desktop
+@guest-desktop-agents
+@hardware-support
+@internet-browser
+@multimedia
+@networkmanager-submodules
+@workstation-product
+
+# Libreoffice
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+
+# Exclude unwanted packages from @anaconda-tools group
+-gfs2-utils
+-reiserfs-utils
+
+%end

live/8/prod/rocky-live-base-spin.ks

@@ -0,0 +1,358 @@
+# rocky-live-base-spin.ks
+#
+# Base installation information for Rocky Linux images
+# Contains EPEL.
+#
+
+lang en_US.UTF-8
+keyboard us
+timezone US/Eastern
+selinux --enforcing
+firewall --enabled --service=mdns
+xconfig --startxonboot
+zerombr
+clearpart --all
+part / --size 5120 --fstype ext4
+services --enabled=NetworkManager,ModemManager --disabled=sshd
+network --bootproto=dhcp --device=link --activate
+rootpw --lock --iscrypted locked
+shutdown
+
+%include rocky-repo-epel.ks
+
+%packages
+@base-x
+@guest-desktop-agents
+@standard
+@core
+@fonts
+@input-methods
+@dial-up
+@multimedia
+@hardware-support
+
+# explicit
+kernel
+kernel-modules
+kernel-modules-extra
+memtest86+
+anaconda
+anaconda-install-env-deps
+anaconda-live
+@anaconda-tools
+
+# Required for SVG rnotes images
+aajohan-comfortaa-fonts
+
+# RHBZ#1242586 - Required for initramfs creation
+dracut-live
+syslinux
+
+# Anaconda needs all the locales available, just like a DVD installer
+glibc-all-langpacks
+
+# no longer in @core since 2018-10, but needed for livesys script
+initscripts
+chkconfig
+
+# absolutely required - don't want a system that can't actually update
+epel-release
+%end
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+%end
+
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end

live/8/prod/rocky-live-base.ks

@@ -0,0 +1,354 @@
+# rocky-live-base.ks
+#
+# Base installation information for Rocky Linux images
+#
+
+lang en_US.UTF-8
+keyboard us
+timezone US/Eastern
+selinux --enforcing
+firewall --enabled --service=mdns
+xconfig --startxonboot
+zerombr
+clearpart --all
+part / --size 5120 --fstype ext4
+services --enabled=NetworkManager,ModemManager --disabled=sshd
+network --bootproto=dhcp --device=link --activate
+rootpw --lock --iscrypted locked
+shutdown
+
+%include rocky-repo.ks
+
+%packages
+@base-x
+@guest-desktop-agents
+@standard
+@core
+@fonts
+@input-methods
+@dial-up
+@multimedia
+@hardware-support
+
+# explicit
+kernel
+kernel-modules
+kernel-modules-extra
+memtest86+
+anaconda
+anaconda-install-env-deps
+anaconda-live
+@anaconda-tools
+
+# Required for SVG rnotes images
+aajohan-comfortaa-fonts
+
+# RHBZ#1242586 - Required for initramfs creation
+dracut-live
+syslinux
+
+# Anaconda needs all the locales available, just like a DVD installer
+glibc-all-langpacks
+
+# This isn't in @core anymore, but livesys still needs it
+initscripts
+chkconfig
+%end
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+%end
+
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# This only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end

live/8/prod/rocky-live-kde-base.ks

@@ -0,0 +1,115 @@
+# Maintained by RelEng
+
+%include rocky-live-base-spin.ks
+%include rocky-live-kde-common.ks
+
+%post
+
+# set default GTK+ theme for root (see #683855, #689070, #808062)
+cat > /root/.gtkrc-2.0 << EOF
+include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
+include "/etc/gtk-2.0/gtkrc"
+gtk-theme-name="Adwaita"
+EOF
+mkdir -p /root/.config/gtk-3.0
+cat > /root/.config/gtk-3.0/settings.ini << EOF
+[Settings]
+gtk-theme-name = Adwaita
+EOF
+
+# add initscript
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+# are we *not* able to use wayland sessions?
+if strstr "\`cat /proc/cmdline\`" nomodeset ; then
+PLASMA_SESSION_FILE="plasmax11.desktop"
+else
+PLASMA_SESSION_FILE="plasma.desktop"
+fi
+
+# set up autologin for user liveuser
+if [ -f /etc/sddm.conf ]; then
+sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
+sed -i "s/^#Session=.*/Session=\${PLASMA_SESSION_FILE}/" /etc/sddm.conf
+else
+cat > /etc/sddm.conf << SDDM_EOF
+[Autologin]
+User=liveuser
+Session=\${PLASMA_SESSION_FILE}
+SDDM_EOF
+fi
+
+# add liveinst.desktop to favorites menu
+mkdir -p /home/liveuser/.config/
+cat > /home/liveuser/.config/kickoffrc << MENU_EOF
+[Favorites]
+FavoriteURLs=/usr/share/applications/firefox.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
+MENU_EOF
+
+# show liveinst.desktop on desktop and in menu
+sed -i 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+
+# debrand
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+#sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/liveinst.desktop
+
+# set executable bit disable KDE security warning
+chmod +x /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp -a /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
+
+if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop   ]; then
+  mkdir -p ~liveuser/.config/autostart
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+fi
+
+# Set akonadi backend
+mkdir -p /home/liveuser/.config/akonadi
+cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
+[%General]
+Driver=QSQLITE3
+AKONADI_EOF
+
+# Disable plasma-pk-updates if applicable
+rpm -e plasma-pk-updates
+
+# "Disable plasma-discover-notifier"
+mkdir -p /home/liveuser/.config/autostart
+cp -a /etc/xdg/autostart/org.kde.discover.notifier.desktop /home/liveuser/.config/autostart/
+echo 'Hidden=true' >> /home/liveuser/.config/autostart/org.kde.discover.notifier.desktop
+
+# Disable baloo
+cat > /home/liveuser/.config/baloofilerc << BALOO_EOF
+[Basic Settings]
+Indexing-Enabled=false
+BALOO_EOF
+
+mkdir -p ~liveuser/.kde/share/config/
+
+# Disable kres-migrator
+cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
+[Migration]
+Enabled=false
+KRES_EOF
+
+# Disable kwallet migrator
+cat > /home/liveuser/.config/kwalletrc << KWALLET_EOL
+[Migration]
+alreadyMigrated=true
+KWALLET_EOL
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+systemctl enable --force sddm.service
+dnf config-manager --set-enabled powertools
+
+%end

live/8/prod/rocky-live-kde-common.ks

@@ -0,0 +1,80 @@
+
+%packages
+# install env-group to resolve RhBug:1891500
+@^kde-desktop-environment
+
+@firefox
+@kde-apps
+@kde-media
+
+# Libreoffice
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+
+-@admin-tools
+
+### The KDE-Desktop
+
+### fixes
+sddm
+sddm-breeze
+sddm-themes
+sddm-kcm
+
+# use kde-print-manager instead of system-config-printer
+-system-config-printer
+# make sure mariadb lands instead of MySQL (hopefully a temporary hack)
+mariadb-embedded
+mariadb-connector-c
+mariadb-server
+
+# minimal localization support - allows installing the kde-l10n-* packages
+#system-config-language <- Not in EL8
+#kde-l10n <- Not in EL8
+
+# unwanted packages from @kde-desktop
+# don't include these for now to fit on a cd
+-desktop-backgrounds-basic
+-kdeaccessibility*
+-ktorrent			# kget has also basic torrent features (~3 megs)
+-digikam			# digikam has duplicate functionality with gwenview (~28 megs)
+-kipi-plugins			# ~8 megs + drags in Marble
+-krusader			# ~4 megs
+-k3b				# ~15 megs
+
+#-kdeplasma-addons		# ~16 megs
+
+# Additional packages that are not default in kde-* groups, but useful
+#kdeartwork			# only include some parts of kdeartwork
+fuse
+#mediawriter <-- Not in EL8
+
+### space issues
+
+# admin-tools
+-gnome-disk-utility
+# kcm_clock still lacks some features, so keep system-config-date around
+#-system-config-date
+# prefer kcm_systemd
+-system-config-services
+# prefer/use kusers
+-system-config-users
+
+# we need to keep epel-release, otherwise we can't update
+epel-release
+
+### MINIMIZATION ###
+-mpage
+-hplip
+-isdn4k-utils
+-xsane
+-xsane-gimp
+-@input-methods
+-scim*
+-iok
+
+%end
+

live/8/prod/rocky-live-kde-minimization.ks

@@ -0,0 +1,6 @@
+# Remove a few things we don't need
+%packages
+-@input-methods
+-scim*
+-iok
+%end

live/8/prod/rocky-live-kde.ks

@@ -0,0 +1,10 @@
+# rocky-live-kde.ks
+# BROKEN
+
+%include rocky-live-kde-base.ks
+
+# DVD
+part / --size=7300
+
+%post
+%end

live/8/prod/rocky-live-minimization.ks

@@ -0,0 +1,14 @@
+# Saving space
+%packages
+
+# save some space
+-mpage
+-hplip
+-isdn4k-utils
+
+# scanning takes quite a bit of space :/
+-xsane
+-xsane-gimp
+-sane-backends
+
+%end

live/8/prod/rocky-live-workstation-lite.ks

@@ -0,0 +1,101 @@
+# Maintained by Release Engineering
+# mailto:releng@rockylinux.org
+
+%include rocky-live-base.ks
+%include rocky-workstation-common-lite.ks
+#
+# Disable this for now as packagekit is causing compose failures
+# by leaving a gpg-agent around holding /dev/null open.
+#
+#include snippets/packagekit-cached-metadata.ks
+
+part / --size 6656
+
+%post
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable gnome-software automatically downloading updates
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't autostart gnome-software session service
+rm -f /etc/xdg/autostart/gnome-software-service.desktop
+
+# disable the gnome-software shell search provider
+cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
+DefaultDisabled=true
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# suppress anaconda spokes redundant with gnome-initial-setup
+cat >> /etc/sysconfig/anaconda << FOE
+[NetworkSpoke]
+visited=1
+
+[PasswordSpoke]
+visited=1
+
+[UserSpoke]
+visited=1
+FOE
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+    #sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/anaconda.desktop
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+  fi
+
+  # Copy Anaconda branding in place
+  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
+    cp -a /usr/share/lorax/product/* /
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+%end

live/8/prod/rocky-live-workstation.ks

@@ -0,0 +1,101 @@
+# Maintained by Release Engineering
+# mailto:releng@rockylinux.org
+
+%include rocky-live-base.ks
+%include rocky-workstation-common.ks
+#
+# Disable this for now as packagekit is causing compose failures
+# by leaving a gpg-agent around holding /dev/null open.
+#
+#include snippets/packagekit-cached-metadata.ks
+
+part / --size 6656
+
+%post
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable gnome-software automatically downloading updates
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't autostart gnome-software session service
+rm -f /etc/xdg/autostart/gnome-software-service.desktop
+
+# disable the gnome-software shell search provider
+cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
+DefaultDisabled=true
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# suppress anaconda spokes redundant with gnome-initial-setup
+cat >> /etc/sysconfig/anaconda << FOE
+[NetworkSpoke]
+visited=1
+
+[PasswordSpoke]
+visited=1
+
+[UserSpoke]
+visited=1
+FOE
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+    #sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/anaconda.desktop
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+  fi
+
+  # Copy Anaconda branding in place
+  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
+    cp -a /usr/share/lorax/product/* /
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+%end

live/8/prod/rocky-live-xfce-common.ks

@@ -0,0 +1,78 @@
+# xfce
+%packages
+
+# these aren't an epel 8 thing for some reason.
+@xfce-desktop
+#@^xfce-desktop-environment
+#@xfce-apps
+#@xfce-extra-plugins
+#@xfce-media
+#@xfce-office
+
+# Manual install...
+geany
+gparted
+mousepad
+ristretto
+seahorse
+transmission
+pcp-selinux
+lightdm
+#gdm
+-gdm
+-gnome-shell
+-gnome-menus
+
+# Some stuff might already be here, doesn't hurt to list it.
+firefox
+thunderbird
+firewall-config
+pidgin
+rocky-backgrounds
+gparted
+rhythmbox
+
+# extras
+f32-backgrounds-xfce
+f32-backgrounds-extras-xfce
+
+xfce4-about
+xfce4-appfinder
+xfce4-taskmanager
+xfce4-pulseaudio-plugin
+xfce4-battery-plugin
+xfce4-datetime-plugin
+xfce4-netload-plugin
+xfce4-places-plugin
+xfce4-screenshooter-plugin
+xfce4-smartbookmark-plugin
+xfce4-systemload-plugin
+xfce4-time-out-plugin
+xfce4-weather-plugin
+xfce4-whiskermenu-plugin
+xfdashboard
+xfdashboard-themes
+pavucontrol
+
+wget
+xdg-user-dirs
+xdg-user-dirs-gtk
+
+# save some space
+-autofs
+-acpid
+-gimp-help
+-desktop-backgrounds-basic
+-aspell-*
+-xfce4-sensors-plugin
+-xfce4-eyes-plugin
+
+### MINIMIZATION
+-mpage
+-hplip
+-isdn4k-utils
+-xsane
+-xsane-gimp
+-sane-backends
+
+%end

live/8/prod/rocky-live-xfce.ks

@@ -0,0 +1,92 @@
+# rocky-live-kde.ks
+# BROKEN
+
+%include rocky-live-base-spin.ks
+%include rocky-live-xfce-common.ks
+
+part / --size 6144
+
+%post
+# xfce configuration
+
+# create /etc/sysconfig/desktop (needed for installation)
+
+cat > /etc/sysconfig/desktop <<EOF
+PREFERRED=/usr/bin/startxfce4
+DISPLAYMANAGER=/usr/sbin/lightdm
+EOF
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+mkdir -p /home/liveuser/.config/xfce4
+# ugly stuff, this should give us a default background for now
+mkdir -p /usr/share/backgrounds/images
+ln -s /usr/share/backgrounds/f32/default/f32.png \
+  /usr/share/backgrounds/images/default.png
+
+cat > /home/liveuser/.config/xfce4/helpers.rc << FOE
+MailReader=sylpheed-claws
+FileManager=Thunar
+WebBrowser=firefox
+FOE
+
+# disable screensaver locking (#674410)
+cat >> /home/liveuser/.xscreensaver << FOE
+mode:           off
+lock:           False
+dpmsEnabled:    False
+FOE
+
+# deactivate xfconf-migration (#683161)
+rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
+
+# deactivate xfce4-panel first-run dialog (#693569)
+mkdir -p /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml
+cp /etc/xdg/xfce4/panel/default.xml /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
+
+# set up lightdm autologin
+sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
+sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
+sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
+
+# set Xfce as default session, otherwise login will fail
+sed -i 's/^#user-session=.*/user-session=xfce/' /etc/lightdm/lightdm.conf
+
+# debrand
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+#sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/liveinst.desktop
+
+# Show harddisk install on the desktop
+sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
+
+if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop  ]; then
+  mkdir -p ~liveuser/.config/autostart
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+fi
+
+# no updater applet in live environment
+rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
+
+# and mark it as executable (new Xfce security feature)
+chmod +x /home/liveuser/Desktop/liveinst.desktop
+
+# move to anaconda - probably not required for XFCE.
+mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+# this goes at the end after all other changes. 
+chown -R liveuser:liveuser /home/liveuser
+restorecon -R /home/liveuser
+
+EOF
+
+# this doesn't come up automatically. not sure why.
+systemctl enable --force lightdm.service
+dnf config-manager --set-enabled powertools
+
+%end

live/8/prod/rocky-repo-epel.ks

@@ -0,0 +1,15 @@
+# These should change based on the major/minor release
+
+# Deps repo, there are some anaconda packages that are *not* available by default
+repo --name=BaseOS --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/
+repo --name=AppStream --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/AppStream/$basearch/os/
+repo --name=PowerTools --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/PowerTools/$basearch/os/
+repo --name=extras --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/extras/$basearch/os
+
+# EPEL (required for KDE and XFCE)
+repo --name=epel --cost=200 --baseurl=https://dl.fedoraproject.org/pub/epel/8/Everything/$basearch/
+repo --name=epel-modular --cost=200 --baseurl=https://dl.fedoraproject.org/pub/epel/8/Modular/$basearch/
+
+# URL to the base os repo
+url --url=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/
+#url --url=http://10.100.0.1/pub/deps

live/8/prod/rocky-repo.ks

@@ -0,0 +1,10 @@
+# These should change based on the major/minor release
+
+# Base repos
+repo --name=BaseOS --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/
+repo --name=AppStream --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/AppStream/$basearch/os/
+repo --name=PowerTools --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/PowerTools/$basearch/os/
+repo --name=extras --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/8.6/extras/$basearch/os
+
+# URL to the base os repo
+url --url=http://dl.rockylinux.org/pub/rocky/8.6/BaseOS/$basearch/os/

live/8/prod/rocky-workstation-common-lite.ks

@@ -0,0 +1,30 @@
+%packages
+
+# Exclude unwanted groups that rocky-live-base.ks pulls in
+-@dial-up
+-@input-methods
+-@standard
+
+# Make sure to sync any additions / removals done here with
+# workstation-product-environment in comps
+@base-x
+@core
+@fonts
+@gnome-desktop
+@guest-desktop-agents
+@hardware-support
+@internet-browser
+@networkmanager-submodules
+
+# Libreoffice
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+
+# Exclude unwanted packages from @anaconda-tools group
+-gfs2-utils
+-reiserfs-utils
+
+%end

live/8/prod/rocky-workstation-common.ks

@@ -0,0 +1,32 @@
+%packages
+
+# Exclude unwanted groups that rocky-live-base.ks pulls in
+-@dial-up
+-@input-methods
+-@standard
+
+# Make sure to sync any additions / removals done here with
+# workstation-product-environment in comps
+@base-x
+@core
+@fonts
+@gnome-desktop
+@guest-desktop-agents
+@hardware-support
+@internet-browser
+@multimedia
+@networkmanager-submodules
+@workstation-product
+
+# Libreoffice
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+
+# Exclude unwanted packages from @anaconda-tools group
+-gfs2-utils
+-reiserfs-utils
+
+%end

live/8/stage/mainline/rocky-live-base.ks

@@ -0,0 +1,355 @@
+# rocky-live-base.ks
+#
+# Base installation information for Rocky Linux images
+#
+
+lang en_US.UTF-8
+keyboard us
+timezone US/Eastern
+selinux --enforcing
+firewall --enabled --service=mdns
+xconfig --startxonboot
+zerombr
+clearpart --all
+part / --size 5120 --fstype ext4
+services --enabled=NetworkManager,ModemManager --disabled=sshd
+network --bootproto=dhcp --device=link --activate
+rootpw --lock --iscrypted locked
+shutdown
+
+%include rocky-repo-mainline.ks
+
+%packages
+@base-x
+@guest-desktop-agents
+@standard
+@core
+@fonts
+@input-methods
+@dial-up
+@multimedia
+@hardware-support
+
+# explicit
+elrepo-release
+kernel-ml
+kernel-ml-modules
+kernel-ml-modules-extra
+memtest86+
+anaconda
+anaconda-install-env-deps
+anaconda-live
+@anaconda-tools
+
+# Required for SVG rnotes images
+aajohan-comfortaa-fonts
+
+# RHBZ#1242586 - Required for initramfs creation
+dracut-live
+syslinux
+
+# Anaconda needs all the locales available, just like a DVD installer
+glibc-all-langpacks
+
+# This isn't in @core anymore, but livesys still needs it
+initscripts
+chkconfig
+%end
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+%end
+
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# This only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end

live/8/stage/mainline/rocky-live-workstation.ks

@@ -0,0 +1,107 @@
+# Maintained by Release Engineering
+# mailto:releng@rockylinux.org
+
+%include rocky-live-base.ks
+%include rocky-workstation-common.ks
+#
+# Disable this for now as packagekit is causing compose failures
+# by leaving a gpg-agent around holding /dev/null open.
+#
+#include snippets/packagekit-cached-metadata.ks
+
+part / --size 6656
+
+%post
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable gnome-software automatically downloading updates
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't autostart gnome-software session service
+rm -f /etc/xdg/autostart/gnome-software-service.desktop
+
+# disable the gnome-software shell search provider
+cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
+DefaultDisabled=true
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# suppress anaconda spokes redundant with gnome-initial-setup
+cat >> /etc/sysconfig/anaconda << FOE
+[NetworkSpoke]
+visited=1
+
+[PasswordSpoke]
+visited=1
+
+[UserSpoke]
+visited=1
+FOE
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+    #sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/anaconda.desktop
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+  fi
+
+  # Copy Anaconda branding in place
+  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
+    cp -a /usr/share/lorax/product/* /
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# switch default kernel
+sed -i 's/DEFAULTKERNEL=kernel/DEFAULTKERNEL=kernel-ml/g' /etc/sysconfig/kernel
+
+# enable elrepo kernel
+dnf config-manager --set-enabled elrepo-kernel
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+%end

live/8/stage/mainline/rocky-repo-mainline.ks

@@ -0,0 +1,14 @@
+# These should change based on the major/minor release
+
+# Deps repo, there are some anaconda packages that are *not* available by default
+repo --name=BaseOS --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/BaseOS/$basearch/os/
+repo --name=AppStream --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/AppStream/$basearch/os/
+repo --name=PowerTools --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/PowerTools/$basearch/os/
+repo --name=extras --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/extras/$basearch/os
+
+# ELRepo
+repo --name="elrepo-kernel" --baseurl=https://elrepo.org/linux/kernel/el8/$basearch/ --cost=200
+
+# URL to the base os repo
+url --url=http://dl.rockylinux.org/stg/rocky/8.6/BaseOS/$basearch/os/
+#url --url=http://10.100.0.1/pub/deps

live/8/stage/mainline/rocky-workstation-common.ks

@@ -0,0 +1,32 @@
+%packages
+
+# Exclude unwanted groups that rocky-live-base.ks pulls in
+-@dial-up
+-@input-methods
+-@standard
+
+# Make sure to sync any additions / removals done here with
+# workstation-product-environment in comps
+@base-x
+@core
+@fonts
+@gnome-desktop
+@guest-desktop-agents
+@hardware-support
+@internet-browser
+@multimedia
+@networkmanager-submodules
+@workstation-product
+
+# Libreoffice
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+
+# Exclude unwanted packages from @anaconda-tools group
+-gfs2-utils
+-reiserfs-utils
+
+%end

live/8/stage/rocky-live-base-spin.ks

@@ -0,0 +1,358 @@
+# rocky-live-base-spin.ks
+#
+# Base installation information for Rocky Linux images
+# Contains EPEL.
+#
+
+lang en_US.UTF-8
+keyboard us
+timezone US/Eastern
+selinux --enforcing
+firewall --enabled --service=mdns
+xconfig --startxonboot
+zerombr
+clearpart --all
+part / --size 5120 --fstype ext4
+services --enabled=NetworkManager,ModemManager --disabled=sshd
+network --bootproto=dhcp --device=link --activate
+rootpw --lock --iscrypted locked
+shutdown
+
+%include rocky-repo-epel.ks
+
+%packages
+@base-x
+@guest-desktop-agents
+@standard
+@core
+@fonts
+@input-methods
+@dial-up
+@multimedia
+@hardware-support
+
+# explicit
+kernel
+kernel-modules
+kernel-modules-extra
+memtest86+
+anaconda
+anaconda-install-env-deps
+anaconda-live
+@anaconda-tools
+
+# Required for SVG rnotes images
+aajohan-comfortaa-fonts
+
+# RHBZ#1242586 - Required for initramfs creation
+dracut-live
+syslinux
+
+# Anaconda needs all the locales available, just like a DVD installer
+glibc-all-langpacks
+
+# no longer in @core since 2018-10, but needed for livesys script
+initscripts
+chkconfig
+
+# absolutely required - don't want a system that can't actually update
+epel-release
+%end
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+%end
+
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end

live/8/stage/rocky-live-base.ks

@@ -0,0 +1,354 @@
+# rocky-live-base.ks
+#
+# Base installation information for Rocky Linux images
+#
+
+lang en_US.UTF-8
+keyboard us
+timezone US/Eastern
+selinux --enforcing
+firewall --enabled --service=mdns
+xconfig --startxonboot
+zerombr
+clearpart --all
+part / --size 5120 --fstype ext4
+services --enabled=NetworkManager,ModemManager --disabled=sshd
+network --bootproto=dhcp --device=link --activate
+rootpw --lock --iscrypted locked
+shutdown
+
+%include rocky-repo.ks
+
+%packages
+@base-x
+@guest-desktop-agents
+@standard
+@core
+@fonts
+@input-methods
+@dial-up
+@multimedia
+@hardware-support
+
+# explicit
+kernel
+kernel-modules
+kernel-modules-extra
+memtest86+
+anaconda
+anaconda-install-env-deps
+anaconda-live
+@anaconda-tools
+
+# Required for SVG rnotes images
+aajohan-comfortaa-fonts
+
+# RHBZ#1242586 - Required for initramfs creation
+dracut-live
+syslinux
+
+# Anaconda needs all the locales available, just like a DVD installer
+glibc-all-langpacks
+
+# This isn't in @core anymore, but livesys still needs it
+initscripts
+chkconfig
+%end
+
+%post
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# Enable swap unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+# Support for persistent homes
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+# Help locate persistent homes
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# Mount the persistent home if it's available
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# Create the liveuser (no password) so automatic logins and sudo works
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Same for root
+passwd -d root > /dev/null
+
+# Turn off firstboot (similar to a DVD/minimal install, where it asks
+# for the user to accept the EULA before bringing up a TTY)
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# Prelinking damages the images
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# Turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# Even if there isn't gnome, this doesn't hurt.
+gsettings set org.gnome.software download-updates 'false' || :
+
+# Disable cron
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# Disable abrt
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost" > /etc/hostname
+
+EOF
+
+# HAL likes to start late.
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# Read some stuff out of the kernel cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# If liveinst or textinst is given, start installer
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# Configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
+
+# Enable tmpfs for /tmp - this is a good idea
+systemctl enable tmp.mount
+
+# make it so that we don't do writing to the overlay for things which
+# are just tmpdirs/caches
+# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
+cat >> /etc/fstab << EOF
+vartmp   /var/tmp    tmpfs   defaults   0  0
+EOF
+
+# PackageKit likes to play games. Let's fix that.
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
+echo "Packages within this LiveCD"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# go ahead and pre-make the man -k cache (#455968)
+/usr/bin/mandb
+
+# make sure there aren't core files lying around
+rm -f /core*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# convince readahead not to collect
+# FIXME: for systemd
+
+echo 'File created by kickstart. See systemd-update-done.service(8).' \
+    | tee /etc/.updated >/var/.updated
+
+# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
+# See bug 1317709
+rm -f /boot/*-rescue*
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794 - the error is expected
+/sbin/chkconfig network off
+
+# Remove machine-id on generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+%end
+
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# This only works on x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end

live/8/stage/rocky-live-kde-base.ks

@@ -0,0 +1,115 @@
+# Maintained by RelEng
+
+%include rocky-live-base-spin.ks
+%include rocky-live-kde-common.ks
+
+%post
+
+# set default GTK+ theme for root (see #683855, #689070, #808062)
+cat > /root/.gtkrc-2.0 << EOF
+include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
+include "/etc/gtk-2.0/gtkrc"
+gtk-theme-name="Adwaita"
+EOF
+mkdir -p /root/.config/gtk-3.0
+cat > /root/.config/gtk-3.0/settings.ini << EOF
+[Settings]
+gtk-theme-name = Adwaita
+EOF
+
+# add initscript
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+# are we *not* able to use wayland sessions?
+if strstr "\`cat /proc/cmdline\`" nomodeset ; then
+PLASMA_SESSION_FILE="plasmax11.desktop"
+else
+PLASMA_SESSION_FILE="plasma.desktop"
+fi
+
+# set up autologin for user liveuser
+if [ -f /etc/sddm.conf ]; then
+sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
+sed -i "s/^#Session=.*/Session=\${PLASMA_SESSION_FILE}/" /etc/sddm.conf
+else
+cat > /etc/sddm.conf << SDDM_EOF
+[Autologin]
+User=liveuser
+Session=\${PLASMA_SESSION_FILE}
+SDDM_EOF
+fi
+
+# add liveinst.desktop to favorites menu
+mkdir -p /home/liveuser/.config/
+cat > /home/liveuser/.config/kickoffrc << MENU_EOF
+[Favorites]
+FavoriteURLs=/usr/share/applications/firefox.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
+MENU_EOF
+
+# show liveinst.desktop on desktop and in menu
+sed -i 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+
+# debrand
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+#sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/liveinst.desktop
+
+# set executable bit disable KDE security warning
+chmod +x /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp -a /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
+
+if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop   ]; then
+  mkdir -p ~liveuser/.config/autostart
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+fi
+
+# Set akonadi backend
+mkdir -p /home/liveuser/.config/akonadi
+cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
+[%General]
+Driver=QSQLITE3
+AKONADI_EOF
+
+# Disable plasma-pk-updates if applicable
+rpm -e plasma-pk-updates
+
+# "Disable plasma-discover-notifier"
+mkdir -p /home/liveuser/.config/autostart
+cp -a /etc/xdg/autostart/org.kde.discover.notifier.desktop /home/liveuser/.config/autostart/
+echo 'Hidden=true' >> /home/liveuser/.config/autostart/org.kde.discover.notifier.desktop
+
+# Disable baloo
+cat > /home/liveuser/.config/baloofilerc << BALOO_EOF
+[Basic Settings]
+Indexing-Enabled=false
+BALOO_EOF
+
+mkdir -p ~liveuser/.kde/share/config/
+
+# Disable kres-migrator
+cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
+[Migration]
+Enabled=false
+KRES_EOF
+
+# Disable kwallet migrator
+cat > /home/liveuser/.config/kwalletrc << KWALLET_EOL
+[Migration]
+alreadyMigrated=true
+KWALLET_EOL
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+systemctl enable --force sddm.service
+dnf config-manager --set-enabled powertools
+
+%end

live/8/stage/rocky-live-kde-common.ks

@@ -0,0 +1,80 @@
+
+%packages
+# install env-group to resolve RhBug:1891500
+@^kde-desktop-environment
+
+@firefox
+@kde-apps
+@kde-media
+
+# Libreoffice
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+
+-@admin-tools
+
+### The KDE-Desktop
+
+### fixes
+sddm
+sddm-breeze
+sddm-themes
+sddm-kcm
+
+# use kde-print-manager instead of system-config-printer
+-system-config-printer
+# make sure mariadb lands instead of MySQL (hopefully a temporary hack)
+mariadb-embedded
+mariadb-connector-c
+mariadb-server
+
+# minimal localization support - allows installing the kde-l10n-* packages
+#system-config-language <- Not in EL8
+#kde-l10n <- Not in EL8
+
+# unwanted packages from @kde-desktop
+# don't include these for now to fit on a cd
+-desktop-backgrounds-basic
+-kdeaccessibility*
+-ktorrent			# kget has also basic torrent features (~3 megs)
+-digikam			# digikam has duplicate functionality with gwenview (~28 megs)
+-kipi-plugins			# ~8 megs + drags in Marble
+-krusader			# ~4 megs
+-k3b				# ~15 megs
+
+#-kdeplasma-addons		# ~16 megs
+
+# Additional packages that are not default in kde-* groups, but useful
+#kdeartwork			# only include some parts of kdeartwork
+fuse
+#mediawriter <-- Not in EL8
+
+### space issues
+
+# admin-tools
+-gnome-disk-utility
+# kcm_clock still lacks some features, so keep system-config-date around
+#-system-config-date
+# prefer kcm_systemd
+-system-config-services
+# prefer/use kusers
+-system-config-users
+
+# we need to keep epel-release, otherwise we can't update
+epel-release
+
+### MINIMIZATION ###
+-mpage
+-hplip
+-isdn4k-utils
+-xsane
+-xsane-gimp
+-@input-methods
+-scim*
+-iok
+
+%end
+

live/8/stage/rocky-live-kde-minimization.ks

@@ -0,0 +1,6 @@
+# Remove a few things we don't need
+%packages
+-@input-methods
+-scim*
+-iok
+%end

live/8/stage/rocky-live-kde.ks

@@ -0,0 +1,10 @@
+# rocky-live-kde.ks
+# BROKEN
+
+%include rocky-live-kde-base.ks
+
+# DVD
+part / --size=7000
+
+%post
+%end

live/8/stage/rocky-live-minimization.ks

@@ -0,0 +1,14 @@
+# Saving space
+%packages
+
+# save some space
+-mpage
+-hplip
+-isdn4k-utils
+
+# scanning takes quite a bit of space :/
+-xsane
+-xsane-gimp
+-sane-backends
+
+%end

live/8/stage/rocky-live-workstation-lite.ks

@@ -0,0 +1,101 @@
+# Maintained by Release Engineering
+# mailto:releng@rockylinux.org
+
+%include rocky-live-base.ks
+%include rocky-workstation-common-lite.ks
+#
+# Disable this for now as packagekit is causing compose failures
+# by leaving a gpg-agent around holding /dev/null open.
+#
+#include snippets/packagekit-cached-metadata.ks
+
+part / --size 6656
+
+%post
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable gnome-software automatically downloading updates
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't autostart gnome-software session service
+rm -f /etc/xdg/autostart/gnome-software-service.desktop
+
+# disable the gnome-software shell search provider
+cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
+DefaultDisabled=true
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# suppress anaconda spokes redundant with gnome-initial-setup
+cat >> /etc/sysconfig/anaconda << FOE
+[NetworkSpoke]
+visited=1
+
+[PasswordSpoke]
+visited=1
+
+[UserSpoke]
+visited=1
+FOE
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+    #sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/anaconda.desktop
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+  fi
+
+  # Copy Anaconda branding in place
+  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
+    cp -a /usr/share/lorax/product/* /
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+%end

live/8/stage/rocky-live-workstation.ks

@@ -0,0 +1,101 @@
+# Maintained by Release Engineering
+# mailto:releng@rockylinux.org
+
+%include rocky-live-base.ks
+%include rocky-workstation-common.ks
+#
+# Disable this for now as packagekit is causing compose failures
+# by leaving a gpg-agent around holding /dev/null open.
+#
+#include snippets/packagekit-cached-metadata.ks
+
+part / --size 6656
+
+%post
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable gnome-software automatically downloading updates
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't autostart gnome-software session service
+rm -f /etc/xdg/autostart/gnome-software-service.desktop
+
+# disable the gnome-software shell search provider
+cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
+DefaultDisabled=true
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# suppress anaconda spokes redundant with gnome-initial-setup
+cat >> /etc/sysconfig/anaconda << FOE
+[NetworkSpoke]
+visited=1
+
+[PasswordSpoke]
+visited=1
+
+[UserSpoke]
+visited=1
+FOE
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+    #sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+    #sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/anaconda.desktop
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+  fi
+
+  # Copy Anaconda branding in place
+  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
+    cp -a /usr/share/lorax/product/* /
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+restorecon -R /
+
+EOF
+
+%end

live/8/stage/rocky-live-xfce-common.ks

@@ -0,0 +1,78 @@
+# xfce
+%packages
+
+# these aren't an epel 8 thing for some reason.
+@xfce-desktop
+#@^xfce-desktop-environment
+#@xfce-apps
+#@xfce-extra-plugins
+#@xfce-media
+#@xfce-office
+
+# Manual install...
+geany
+gparted
+mousepad
+ristretto
+seahorse
+transmission
+pcp-selinux
+lightdm
+#gdm
+-gdm
+-gnome-shell
+-gnome-menus
+
+# Some stuff might already be here, doesn't hurt to list it.
+firefox
+thunderbird
+firewall-config
+pidgin
+rocky-backgrounds
+gparted
+rhythmbox
+
+# extras
+f32-backgrounds-xfce
+f32-backgrounds-extras-xfce
+
+xfce4-about
+xfce4-appfinder
+xfce4-taskmanager
+xfce4-pulseaudio-plugin
+xfce4-battery-plugin
+xfce4-datetime-plugin
+xfce4-netload-plugin
+xfce4-places-plugin
+xfce4-screenshooter-plugin
+xfce4-smartbookmark-plugin
+xfce4-systemload-plugin
+xfce4-time-out-plugin
+xfce4-weather-plugin
+xfce4-whiskermenu-plugin
+xfdashboard
+xfdashboard-themes
+pavucontrol
+
+wget
+xdg-user-dirs
+xdg-user-dirs-gtk
+
+# save some space
+-autofs
+-acpid
+-gimp-help
+-desktop-backgrounds-basic
+-aspell-*
+-xfce4-sensors-plugin
+-xfce4-eyes-plugin
+
+### MINIMIZATION
+-mpage
+-hplip
+-isdn4k-utils
+-xsane
+-xsane-gimp
+-sane-backends
+
+%end

live/8/stage/rocky-live-xfce.ks

@@ -0,0 +1,92 @@
+# rocky-live-kde.ks
+# BROKEN
+
+%include rocky-live-base-spin.ks
+%include rocky-live-xfce-common.ks
+
+part / --size 6144
+
+%post
+# xfce configuration
+
+# create /etc/sysconfig/desktop (needed for installation)
+
+cat > /etc/sysconfig/desktop <<EOF
+PREFERRED=/usr/bin/startxfce4
+DISPLAYMANAGER=/usr/sbin/lightdm
+EOF
+
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+mkdir -p /home/liveuser/.config/xfce4
+# ugly stuff, this should give us a default background for now
+mkdir -p /usr/share/backgrounds/images
+ln -s /usr/share/backgrounds/f32/default/f32.png \
+  /usr/share/backgrounds/images/default.png
+
+cat > /home/liveuser/.config/xfce4/helpers.rc << FOE
+MailReader=sylpheed-claws
+FileManager=Thunar
+WebBrowser=firefox
+FOE
+
+# disable screensaver locking (#674410)
+cat >> /home/liveuser/.xscreensaver << FOE
+mode:           off
+lock:           False
+dpmsEnabled:    False
+FOE
+
+# deactivate xfconf-migration (#683161)
+rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
+
+# deactivate xfce4-panel first-run dialog (#693569)
+mkdir -p /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml
+cp /etc/xdg/xfce4/panel/default.xml /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
+
+# set up lightdm autologin
+sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
+sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
+sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
+
+# set Xfce as default session, otherwise login will fail
+sed -i 's/^#user-session=.*/user-session=xfce/' /etc/lightdm/lightdm.conf
+
+# debrand
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome.desktop
+#sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/rhel-welcome
+#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/liveinst.desktop
+
+# Show harddisk install on the desktop
+sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
+
+if [ -f /usr/share/anaconda/gnome/rhel-welcome.desktop  ]; then
+  mkdir -p ~liveuser/.config/autostart
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop /usr/share/applications/
+  cp /usr/share/anaconda/gnome/rhel-welcome.desktop ~liveuser/.config/autostart/
+fi
+
+# no updater applet in live environment
+rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
+
+# and mark it as executable (new Xfce security feature)
+chmod +x /home/liveuser/Desktop/liveinst.desktop
+
+# move to anaconda - probably not required for XFCE.
+mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+# this goes at the end after all other changes. 
+chown -R liveuser:liveuser /home/liveuser
+restorecon -R /home/liveuser
+
+EOF
+
+# this doesn't come up automatically. not sure why.
+systemctl enable --force lightdm.service
+dnf config-manager --set-enabled powertools
+
+%end

live/8/stage/rocky-repo-epel.ks

@@ -0,0 +1,15 @@
+# These should change based on the major/minor release
+
+# Deps repo, there are some anaconda packages that are *not* available by default
+repo --name=BaseOS --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/BaseOS/$basearch/os/
+repo --name=AppStream --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/AppStream/$basearch/os/
+repo --name=PowerTools --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/PowerTools/$basearch/os/
+repo --name=extras --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/extras/$basearch/os
+
+# EPEL (required for KDE and XFCE)
+repo --name=epel --cost=200 --baseurl=https://dl.fedoraproject.org/pub/epel/8/Everything/$basearch/
+repo --name=epel-modular --cost=200 --baseurl=https://dl.fedoraproject.org/pub/epel/8/Modular/$basearch/
+
+# URL to the base os repo
+url --url=http://dl.rockylinux.org/stg/rocky/8.6/BaseOS/$basearch/os/
+#url --url=http://10.100.0.1/pub/deps

live/8/stage/rocky-repo.ks

@@ -0,0 +1,10 @@
+# These should change based on the major/minor release
+
+# Base repos
+repo --name=BaseOS --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/BaseOS/$basearch/os/
+repo --name=AppStream --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/AppStream/$basearch/os/
+repo --name=PowerTools --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/PowerTools/$basearch/os/
+repo --name=extras --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/8.6/extras/$basearch/os
+
+# URL to the base os repo
+url --url=http://dl.rockylinux.org/stg/rocky/8.6/BaseOS/$basearch/os/

live/8/stage/rocky-workstation-common-lite.ks

@@ -0,0 +1,30 @@
+%packages
+
+# Exclude unwanted groups that rocky-live-base.ks pulls in
+-@dial-up
+-@input-methods
+-@standard
+
+# Make sure to sync any additions / removals done here with
+# workstation-product-environment in comps
+@base-x
+@core
+@fonts
+@gnome-desktop
+@guest-desktop-agents
+@hardware-support
+@internet-browser
+@networkmanager-submodules
+
+# Libreoffice
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+
+# Exclude unwanted packages from @anaconda-tools group
+-gfs2-utils
+-reiserfs-utils
+
+%end

live/8/stage/rocky-workstation-common.ks

@@ -0,0 +1,32 @@
+%packages
+
+# Exclude unwanted groups that rocky-live-base.ks pulls in
+-@dial-up
+-@input-methods
+-@standard
+
+# Make sure to sync any additions / removals done here with
+# workstation-product-environment in comps
+@base-x
+@core
+@fonts
+@gnome-desktop
+@guest-desktop-agents
+@hardware-support
+@internet-browser
+@multimedia
+@networkmanager-submodules
+@workstation-product
+
+# Libreoffice
+libreoffice-calc
+libreoffice-emailmerge
+libreoffice-graphicfilter
+libreoffice-impress
+libreoffice-writer
+
+# Exclude unwanted packages from @anaconda-tools group
+-gfs2-utils
+-reiserfs-utils
+
+%end