fix rloverride settings

This commit is contained in:
nazunalika 2022-05-13 11:50:52 -07:00
parent 9650f1ff1c
commit adfbd1abde
Signed by: label
GPG Key ID: 6735C0E1BD65D048
26 changed files with 1232 additions and 4 deletions

View File

@ -0,0 +1,8 @@
# These defaults are from upstream and are not patched into systemd like in el8
# https://bugzilla.redhat.com/show_bug.cgi?id=1689346
kernel.kptr_restrict = 1
# Source route verification
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.*.rp_filter = 1
-net.ipv4.conf.all.rp_filter

View File

@ -0,0 +1,8 @@
# These defaults are from upstream and are not patched into systemd like in el8
# https://bugzilla.redhat.com/show_bug.cgi?id=1689346
kernel.kptr_restrict = 1
# Source route verification
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.*.rp_filter = 1
-net.ipv4.conf.all.rp_filter

View File

@ -0,0 +1,11 @@
# We enable all display managers by default. Since only one can
# actually be enabled at the same time the one which is installed
# first wins
enable gdm.service
enable lightdm.service
enable slim.service
enable lxdm.service
enable sddm.service
enable kdm.service
enable xdm.service

View File

@ -0,0 +1,11 @@
# We enable all display managers by default. Since only one can
# actually be enabled at the same time the one which is installed
# first wins
enable gdm.service
enable lightdm.service
enable slim.service
enable lxdm.service
enable sddm.service
enable kdm.service
enable xdm.service

View File

@ -0,0 +1,22 @@
# Enable the D-Bus service (including its socket for socket activation)
# unconditionally. It is used throughout Fedora and required on all machines.
# https://src.fedoraproject.org/rpms/fedora-release/pull-request/4
# https://fedoraproject.org/w/index.php?title=Starting_services_by_default&oldid=377748
enable dbus.socket
enable dbus-broker.service
# Socket-activated pipewire service for individual user sessions
# https://bugzilla.redhat.com/show_bug.cgi?id=1592434
enable pipewire.socket
# Enable the PipeWire PulseAudio compatibility socket interface
# https://bugzilla.redhat.com/show_bug.cgi?id=1904239
# https://bugzilla.redhat.com/show_bug.cgi?id=1907906
# https://fedoraproject.org/wiki/Changes/DefaultPipeWire
enable pipewire-pulse.socket
# https://bugzilla.redhat.com/show_bug.cgi?id=1976006
enable pipewire-media-session.service
# https://bugzilla.redhat.com/show_bug.cgi?id=2022717
enable wireplumber.service

View File

@ -0,0 +1,21 @@
# Enable the D-Bus service (including its socket for socket activation)
# unconditionally. It is used throughout Fedora and required on all machines.
# https://src.fedoraproject.org/rpms/fedora-release/pull-request/4
# https://fedoraproject.org/w/index.php?title=Starting_services_by_default&oldid=377748
enable dbus.socket
enable dbus-broker.service
# Socket-activated pipewire service for individual user sessions
# https://bugzilla.redhat.com/show_bug.cgi?id=1592434
enable pipewire.socket
# Enable the PipeWire PulseAudio compatibility socket interface
# https://bugzilla.redhat.com/show_bug.cgi?id=1904239
# https://bugzilla.redhat.com/show_bug.cgi?id=1907906
# https://fedoraproject.org/wiki/Changes/DefaultPipeWire
enable pipewire-pulse.socket
# https://bugzilla.redhat.com/show_bug.cgi?id=1976006
enable pipewire-media-session.service
# https://bugzilla.redhat.com/show_bug.cgi?id=2022717
enable wireplumber.service

View File

@ -0,0 +1,221 @@
# Also see:
# https://fedoraproject.org/wiki/Starting_services_by_default
disable systemd-timesyncd.service
disable systemd-resolved.service
# systemd
enable remote-fs.target
enable getty@tty1.service
# System stuff
enable sshd.service
enable atd.*
enable crond.*
enable chronyd.service
enable rpcbind.*
enable NetworkManager.service
enable NetworkManager-dispatcher.service
enable ModemManager.service
enable auditd.service
enable restorecond.service
enable bluetooth.*
enable avahi-daemon.*
enable cups.*
# The various syslog implementations
enable rsyslog.*
enable syslog-ng.*
enable sysklogd.*
# Network facing
enable firewalld.service
enable xinetd.service
enable ladvd.service
# Virtualization driver specific daemons. Start by defalt at boot for VM
# autostart, but shutdown after 2 mins and socket activated thereafter
enable virtqemud.service
# Compatibility with libvirtd sockets for old clients and expose TCP sockets
enable virtproxyd.socket
# Secondary drivers providing supporting functionality to main virtualization
# drivers, socket activated only when required
enable virtinterfaced.socket
enable virtnetworkd.socket
enable virtnodedevd.socket
enable virtnwfilterd.socket
enable virtsecretd.socket
enable virtstoraged.socket
# Storage
enable multipathd.service
enable libstoragemgmt.service
enable lvm2-lvmpolld.socket
enable lvm2-monitor.*
enable lvm2-lvmetad.*
enable dm-event.*
enable dmraid-activation.service
# https://bugzilla.redhat.com/show_bug.cgi?id=855372
enable mdmonitor.service
enable mdmonitor-takeover.service
# https://bugzilla.redhat.com/show_bug.cgi?id=876237
enable spice-vdagentd.service
# https://bugzilla.redhat.com/show_bug.cgi?id=885406
enable qemu-guest-agent.service
# https://bugzilla.redhat.com/show_bug.cgi?id=928726
enable dnf-makecache.timer
# https://bugzilla.redhat.com/show_bug.cgi?id=957135
enable vmtoolsd.service
# mcelog is a utility that collects and decodes Machine Check Exception data
# on x86-32 and x86-64 systems.
# https://bugzilla.redhat.com/show_bug.cgi?id=1302179
enable mcelog.service
#https://bugzilla.redhat.com/show_bug.cgi?id=995987
enable kdump.service
#https://bugzilla.redhat.com/show_bug.cgi?id=1009970
enable tuned.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1215645
enable unbound-anchor.timer
# Enable SSSD Kerberos Credential Cache Server
# https://bugzilla.redhat.com/show_bug.cgi?id=1558927
enable sssd-kcm.socket
# https://bugzilla.redhat.com/show_bug.cgi?id=1578833
enable sssd.service
# Hardware
enable gpm.*
enable gpsd.*
enable irqbalance.service
enable lm_sensors.service
enable mcelog.*
enable microcode.service
enable smartd.service
enable pcscd.socket
enable rngd.service
# Other stuff
enable abrtd.service
enable abrt-journal-core.service
enable abrt-oops.service
enable abrt-xorg.service
enable abrt-vmcore.service
enable lttng-sessiond.service
enable ksm.service
enable ksmtuned.service
enable rootfs-resize.service
enable sysstat.service
enable uuidd.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1193616
enable hypervfcopyd.service
enable hypervkvpd.service
enable hypervvssd.service
# Desktop stuff
enable accounts-daemon.service
enable rtkit-daemon.service
enable upower.service
enable udisks2.service
enable packagekit-offline-update.service
enable PackageKit.service
# https://bugzilla.redhat.com/show_bug.cgi?id=2011240
enable power-profiles-daemon.service
# Initial Setup reconfiguration service
enable initial-setup-reconfiguration.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1312446
enable opal-prd.service
# virtlog.service is sometimes used by VMs started by libvirt.service
# Enable virtlog.socket to have it socket activated
# https://bugzilla.redhat.com/show_bug.cgi?id=1325503
enable virtlogd.socket
# https://bugzilla.redhat.com/show_bug.cgi?id=1271839
enable rhsmcertd.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1359645
enable brandbot.*
# https://bugzilla.redhat.com/show_bug.cgi?id=1572550
enable timedatex.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1578870
enable selinux-autorelabel-mark.service
enable rhel-configure.service
enable rhel-dmesg.service
# https://github.com/fedora-sysv/initscripts/commit/37109fdf9808
enable nis-domainname.service
enable import-state.service
enable loadmodules.service
enable readonly-root.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1630200
# s390x specific services
enable cpi.service
enable device_cio_free.service
# Enable the stratis daemon for managing stratis storage
# https://bugzilla.redhat.com/show_bug.cgi?id=1632510
enable stratisd.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1817591
enable mlocate-updatedb.timer
# nvme auto connect
# https://bugzilla.redhat.com/show_bug.cgi?id=1805466
enable nvmefc-boot-connections.service
# OSTree based systems need to remount /sysroot and
# /var as rw via ostree-remount.service
# ignored by non-OSTree based systems
# https://bugzilla.redhat.com/show_bug.cgi?id=1848453
enable ostree-remount.service
# DBus needed by Anaconda
enable dbus.socket
enable dbus-broker.service
# Enable iscsi service files
# https://bugzilla.redhat.com/show_bug.cgi?id=1930458
enable iscsi.service
enable iscsid.socket
enable iscsiuio.socket
enable iscsi-onboot.service
# Enable logrotate.timer
# https://bugzilla.redhat.com/show_bug.cgi?id=1977865
enable logrotate.timer
# Enable greenboot
# https://bugzilla.redhat.com/show_bug.cgi?id=2005552
enable greenboot-grub2-set-counter.service
enable greenboot-grub2-set-success.service
enable greenboot-healthcheck.service
enable greenboot-rpm-ostree-grub2-check-fallback.service
enable greenboot-status.service
enable greenboot-task-runner.service
enable redboot-auto-reboot.service
enable redboot-task-runner.service
# https://bugzilla.redhat.com/show_bug.cgi?id=2013299
enable low-memory-monitor.service
# https://bugzilla.redhat.com/show_bug.cgi?id=2049627
enable switcheroo-control.service

View File

@ -0,0 +1,214 @@
# Also see:
# https://fedoraproject.org/wiki/Starting_services_by_default
disable systemd-timesyncd.service
disable systemd-resolved.service
# systemd
enable remote-fs.target
enable getty@tty1.service
# System stuff
enable sshd.service
enable atd.*
enable crond.*
enable chronyd.service
enable rpcbind.*
enable NetworkManager.service
enable NetworkManager-dispatcher.service
enable ModemManager.service
enable auditd.service
enable restorecond.service
enable bluetooth.*
enable avahi-daemon.*
enable cups.*
# The various syslog implementations
enable rsyslog.*
enable syslog-ng.*
enable sysklogd.*
# Network facing
enable firewalld.service
enable xinetd.service
enable ladvd.service
# Virtualization driver specific daemons. Start by defalt at boot for VM
# autostart, but shutdown after 2 mins and socket activated thereafter
enable virtqemud.service
# Compatibility with libvirtd sockets for old clients and expose TCP sockets
enable virtproxyd.socket
# Secondary drivers providing supporting functionality to main virtualization
# drivers, socket activated only when required
enable virtinterfaced.socket
enable virtnetworkd.socket
enable virtnodedevd.socket
enable virtnwfilterd.socket
enable virtsecretd.socket
enable virtstoraged.socket
# Storage
enable multipathd.service
enable libstoragemgmt.service
enable lvm2-lvmpolld.socket
enable lvm2-monitor.*
enable lvm2-lvmetad.*
enable dm-event.*
enable dmraid-activation.service
# https://bugzilla.redhat.com/show_bug.cgi?id=855372
enable mdmonitor.service
enable mdmonitor-takeover.service
# https://bugzilla.redhat.com/show_bug.cgi?id=876237
enable spice-vdagentd.service
# https://bugzilla.redhat.com/show_bug.cgi?id=885406
enable qemu-guest-agent.service
# https://bugzilla.redhat.com/show_bug.cgi?id=928726
enable dnf-makecache.timer
# https://bugzilla.redhat.com/show_bug.cgi?id=957135
enable vmtoolsd.service
# mcelog is a utility that collects and decodes Machine Check Exception data
# on x86-32 and x86-64 systems.
# https://bugzilla.redhat.com/show_bug.cgi?id=1302179
enable mcelog.service
#https://bugzilla.redhat.com/show_bug.cgi?id=995987
enable kdump.service
#https://bugzilla.redhat.com/show_bug.cgi?id=1009970
enable tuned.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1215645
enable unbound-anchor.timer
# Enable SSSD Kerberos Credential Cache Server
# https://bugzilla.redhat.com/show_bug.cgi?id=1558927
enable sssd-kcm.socket
# https://bugzilla.redhat.com/show_bug.cgi?id=1578833
enable sssd.service
# Hardware
enable gpm.*
enable gpsd.*
enable irqbalance.service
enable lm_sensors.service
enable mcelog.*
enable microcode.service
enable smartd.service
enable pcscd.socket
enable rngd.service
# Other stuff
enable abrtd.service
enable abrt-journal-core.service
enable abrt-oops.service
enable abrt-xorg.service
enable abrt-vmcore.service
enable lttng-sessiond.service
enable ksm.service
enable ksmtuned.service
enable rootfs-resize.service
enable sysstat.service
enable uuidd.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1193616
enable hypervfcopyd.service
enable hypervkvpd.service
enable hypervvssd.service
# Desktop stuff
enable accounts-daemon.service
enable rtkit-daemon.service
enable upower.service
enable udisks2.service
enable packagekit-offline-update.service
enable PackageKit.service
# https://bugzilla.redhat.com/show_bug.cgi?id=2011240
enable power-profiles-daemon.service
# Initial Setup reconfiguration service
enable initial-setup-reconfiguration.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1312446
enable opal-prd.service
# virtlog.service is sometimes used by VMs started by libvirt.service
# Enable virtlog.socket to have it socket activated
# https://bugzilla.redhat.com/show_bug.cgi?id=1325503
enable virtlogd.socket
# https://bugzilla.redhat.com/show_bug.cgi?id=1271839
enable rhsmcertd.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1359645
enable brandbot.*
# https://bugzilla.redhat.com/show_bug.cgi?id=1572550
enable timedatex.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1578870
enable selinux-autorelabel-mark.service
enable rhel-configure.service
enable rhel-dmesg.service
# https://github.com/fedora-sysv/initscripts/commit/37109fdf9808
enable nis-domainname.service
enable import-state.service
enable loadmodules.service
enable readonly-root.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1630200
# s390x specific services
enable cpi.service
enable device_cio_free.service
# Enable the stratis daemon for managing stratis storage
# https://bugzilla.redhat.com/show_bug.cgi?id=1632510
enable stratisd.service
# https://bugzilla.redhat.com/show_bug.cgi?id=1817591
enable mlocate-updatedb.timer
# nvme auto connect
# https://bugzilla.redhat.com/show_bug.cgi?id=1805466
enable nvmefc-boot-connections.service
# OSTree based systems need to remount /sysroot and
# /var as rw via ostree-remount.service
# ignored by non-OSTree based systems
# https://bugzilla.redhat.com/show_bug.cgi?id=1848453
enable ostree-remount.service
# DBus needed by Anaconda
enable dbus.socket
enable dbus-broker.service
# Enable iscsi service files
# https://bugzilla.redhat.com/show_bug.cgi?id=1930458
enable iscsi.service
enable iscsid.socket
enable iscsiuio.socket
enable iscsi-onboot.service
# Enable greenboot
# https://bugzilla.redhat.com/show_bug.cgi?id=2005552
enable greenboot-grub2-set-counter.service
enable greenboot-grub2-set-success.service
enable greenboot-healthcheck.service
enable greenboot-rpm-ostree-grub2-check-fallback.service
enable greenboot-status.service
enable greenboot-task-runner.service
enable redboot-auto-reboot.service
enable redboot-task-runner.service
# https://bugzilla.redhat.com/show_bug.cgi?id=2013299
enable low-memory-monitor.service

View File

@ -0,0 +1,2 @@
# Final disable all
disable *

View File

@ -0,0 +1,2 @@
# Final disable all
disable *

View File

@ -0,0 +1,113 @@
# Community Charter
The Community Charter of the Rocky Enterprise Software Foundation
### Preamble
Enterprise organizations are becoming concerned with using open source software
due to recent events where projects have changed licensing or pivoted to limit
usage due to competition, business models, conflicts of interest, or other
motivation.
We do not assume the open source mindset lightly. It is not a marketing tool, or
a business endeavor. Open source is a development model designed to engage and
foster collaboration and usage. It is a decision which should be carefully
considered, as it should be expected that others, including competitors, will
make use of the technologies that are created by it.
The Rocky Enterprise Software Foundation (RESF) has been created to organize a
community around enterprise, research, academia, individuals, and other
institutions to collaborate on building and maintaining the open source tools
that these organizations need.
Our mission is to provide the confidence and stability necessary to build on
open source projects. Together, we can create a stable foundation of open source
software that companies can use internally, or as the basis for their commercial
needs.
### Purpose
The purpose of this document is to define the vision, mission, principles, and
values of the Rocky Enterprise Software Foundation. We stand together,
voluntarily accountable to this charter by our peers and the enterprise
community at large.
### Vision
A community of individuals and organizations, committed to working together to
provide a stable foundation of open source software within the enterprise.
### Mission
- Build a community of individuals and organizations to develop and foster
enterprise-grade, open source solutions. - Work together to provide for the
needs of the enterprise community. - The security, stability, and integrity of
our projects are paramount. - Enable knowledge sharing, inclusiveness,
collaboration, and open communication. - Coordinate with the commercial,
research, academic, and public sectors to help bring their products,
technologies, and support into enterprise environments. - Always make decisions
in the best interest of the enterprise community while being beholden to no
specific organization(s)
### Principles
Principles are fundamental truths, immutable, and they guide the decisions we
make and the goals that we set. No action can be made by us that is contrary to
the following principles:
- Community responsibility. The Rocky Enterprise Software Foundation is
responsible and accountable only to the community that consumes its projects.
RESF shall be structured and governed in a way that ensures that no single
entity, organization, corporation, association, etc. will be permitted to have a
controlling influence over the RESF or its projects.
- Our projects are free and open source. With few exceptions (branding, legal,
etc.), the work generated by the RESF and its community will be released under
an existing OSI permissive open source license (non-copyleft).
- Trust is paramount. While decisions may sometimes need to be made that balance
opposing perspectives, at all times we strive toward building and maintaining
the overall trust such that the community feels confident in leveraging and
standardizing on the resulting work of this organization for both commercial and
internal usage. - Remain transparent. To the degree that we are reasonably able,
the RESF will remain transparent to the community as defined by our data security
policy: https://forums.rockylinux.org/t/rfc-data-classification-policy/1513
- Equality of Opportunity: The RESF will strive to build and maintain a
collaborative and respectful environment that provides equal access to
opportunities and resources for everyone within the community.
### Values
We derive our values from our principles. It is with these values in mind that
we make decisions, always striving to make the best decision possible with the
data we have at hand.
- Be practical. As open source advocates, our inclination toward solving
problems is to use tools that are themselves permissible open source, but the
best practical solution to a problem may preclude that. We use the right tool
for the right job.
- Be reasonable. Respect is given and trust is earned. Input from all
contributors are valued, and all perspectives are sought after and considered.
Knowledge and righteousness does not follow seniority.
- Team ahead of self. Sycophants are not valuable to an organization, but
neither are contrarians. We respectfully vocalize our concerns but pull
together to drive forward once a decision has been reached.
- Enable the enterprise community. While we are starting with creating a stable
downstream enterprise distribution of Linux, our goals are much broader,
including attention to the needs of special interests, project hosting,
education, collaboration, workshops, meetups, and individuals.
- Consider the human. Rocky Linux is developed and supported by a wide group of
diverse individuals from all walks of life. We are strictly apolitical and will
always assume the best intentions of others.
### Get Involved
We welcome feedback for this charter, and we encourage participation and
engagement from the community. As always, you can get in touch with us for this
or other matters on our website (https://rockylinux.org), forums
(https://forums.rockylinux.org), or through chat (https://chat.rockylinux.org).

66
SOURCES/sb/Contributors Normal file
View File

@ -0,0 +1,66 @@
# -*- coding: utf-8 -*-
We want to thank you for installing Rocky Linux.
The Rocky Linux OS Distribution would not be possible without the hard work and
dedication of the community. Building a distribution is far from easy, but with
unified visions and goals, anything is possible, and Rocky is one of many
examples of this.
The outpouring support from the community and the amount of people who to
together to support us, we want to thank you for believing in us and giving us
a chance. Thank you.
# Special Recognition #
Mustafa Gezen
Skip Grube
Sherif Nagy
Pablo Greco
Louis Abel
Neil Hanlon
Taylor Goodwill
Natalie Forde
Alejandro Ramallo
Wale Soyinka
Ezequiel Bruni
Trevor Cooper
Chris Stackpole
Steven Spencer
# Rocky Linux Teams and Operations #
Leadership:
Gregory Kurtzer
Brian Clemens
Infrastructure and Operations:
Taylor Goodwill
Neil Hanlon
Louis Abel
Randolh (@meltro)
Patric Roberts
Chris Cowley
Mustafa Gezen
Release Engineering/Core:
Louis Abel
Mustafa Gezen
Skip Grube
Sherif Nagy
Pablo Greco
Neil Hanlon
Taylor Goodwill
Security:
Rob Felsburg
Benjamin Agner
Documentation:
Wale Soyinka
Web/Design:
Michael Kinder
Testing:
Trevor Cooper
Chris Stackpole

9
SOURCES/sb/EULA Normal file
View File

@ -0,0 +1,9 @@
Rocky Linux EULA
Rocky Linux comes with no warranties or guarantees of any kind, written or
implied.
The Distribution is released as 3-Clause BSD. Individual packages in the
distribution come with their own licenses which are available on install as well
as the distribution git forge. A copy of the 3-Clause BSD license is included
with the media of this distribution.

44
SOURCES/sb/LICENSE Normal file
View File

@ -0,0 +1,44 @@
All elements of the Rocky Linux operating system that are developed
by Contributors to the Rocky Linux project are licensed and made
available to you under the BSD 3-Clause license.
## Begin 3-Clause BSD License
Copyright 2021 Rocky Linux Project Authors.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
## End 3-Clause BSD License
Note: The Rocky Linux operating system includes a number of pre-existing
software components, each of which is governed by its own open source
license and is made available to you under the terms of such applicable
license. You are responsible for reviewing and complying with the terms
of the licenses for those applicable software components. To obtain a
list of applicable components and their corresponding software licenses,
run the command:
rpm -qa --qf '%{NAME} - %{LICENSE}\n'

View File

@ -0,0 +1,31 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: resf.keykeeper.v1
Comment: Keykeeper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==
=PzIf
-----END PGP PUBLIC KEY BLOCK-----

View File

@ -0,0 +1,52 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----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=/Z/i
-----END PGP PUBLIC KEY BLOCK-----

View File

@ -0,0 +1,195 @@
# rocky-addons.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[highavailability]
name=Rocky Linux $releasever - High Availability
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=HighAvailability-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/HighAvailability/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[highavailability-debug]
name=Rocky Linux $releasever - High Availability - Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=HighAvailability-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/HighAvailability/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[highavailability-source]
name=Rocky Linux $releasever - High Availability - Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=HighAvailability-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/HighAvailability/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[resilientstorage]
name=Rocky Linux $releasever - Resilient Storage
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=ResilientStorage-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/ResilientStorage/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[resilientstorage-debug]
name=Rocky Linux $releasever - Resilient Storage - Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=ResilientStorage-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/ResilientStorage/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[resilientstorage-source]
name=Rocky Linux $releasever - Resilient Storage - Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=ResilientStorage-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/ResilientStorage/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[nfv]
name=Rocky Linux $releasever - NFV
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=NFV-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/NFV/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[nfv-debug]
name=Rocky Linux $releasever - NFV Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/NFV/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[nfv-source]
name=Rocky Linux $releasever - NFV Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/NFV/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[rt]
name=Rocky Linux $releasever - Realtime
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/RT/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[rt-debug]
name=Rocky Linux $releasever - Realtime Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/RT/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[rt-source]
name=Rocky Linux $releasever - Realtime Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/RT/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[sap]
name=Rocky Linux $releasever - SAP
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAP-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAP/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[sap-debug]
name=Rocky Linux $releasever - SAP Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAP-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAP/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[sap-source]
name=Rocky Linux $releasever - SAP Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAP-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAP/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[saphana]
name=Rocky Linux $releasever - SAPHANA
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAPHANA-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAPHANA/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[saphana-debug]
name=Rocky Linux $releasever - SAPHANA Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAPHANA-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAPHANA/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[saphana-source]
name=Rocky Linux $releasever - SAPHANA Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAPHANA-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAPHANA/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing

View File

@ -0,0 +1,23 @@
# rocky-devel.repo
#
# devel and no-package-left-behind
[devel]
name=Rocky Linux $releasever - Devel WARNING! FOR BUILDROOT ONLY
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=Devel-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/Devel/$basearch/os/
gpgcheck=1
enabled=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[nplb]
name=Rocky Linux $releasever - NPLB - WARNING! DO NOT LEAVE PERMANENTLY ENABLED
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=NPLB-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/NPLB/$basearch/os/
gpgcheck=1
enabled=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing

View File

@ -0,0 +1,71 @@
# rocky-extras.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[extras]
name=Rocky Linux $releasever - Extras
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=extras-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/extras/$basearch/os/
gpgcheck=1
enabled=1
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[extras-debug]
name=Rocky Linux $releasever - Extras Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=extras-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/extras/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[extras-source]
name=Rocky Linux $releasever - Extras Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=extras-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/extras/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[plus]
name=Rocky Linux $releasever - Plus
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=rockyplus-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/plus/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[plus-debug]
name=Rocky Linux $releasever - Plus - Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=rockyplus-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/plus/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[plus-source]
name=Rocky Linux $releasever - Plus - Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=rockyplus-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/plus/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing

Binary file not shown.

Binary file not shown.

BIN
SOURCES/sb/rocky.1.gz Normal file

Binary file not shown.

102
SOURCES/sb/rocky.repo Normal file
View File

@ -0,0 +1,102 @@
# rocky.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[baseos]
name=Rocky Linux $releasever - BaseOS
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=BaseOS-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/BaseOS/$basearch/os/
gpgcheck=1
enabled=1
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[baseos-debug]
name=Rocky Linux $releasever - BaseOS - Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=BaseOS-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/BaseOS/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[baseos-source]
name=Rocky Linux $releasever - BaseOS - Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=BaseOS-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/BaseOS/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[appstream]
name=Rocky Linux $releasever - AppStream
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=AppStream-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/AppStream/$basearch/os/
gpgcheck=1
enabled=1
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[appstream-debug]
name=Rocky Linux $releasever - AppStream - Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=AppStream-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/AppStream/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[appstream-source]
name=Rocky Linux $releasever - AppStream - Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=AppStream-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/AppStream/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[crb]
name=Rocky Linux $releasever - CRB
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=CRB-$releasever&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/CRB/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[crb-debug]
name=Rocky Linux $releasever - CRB - Debug
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=CRB-$releasever-debug&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/CRB/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing
[crb-source]
name=Rocky Linux $releasever - CRB - Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=CRB-$releasever-source&rltype=$rltype
baseurl=http://dl.rockylinux.org/$contentdir/$releasever/CRB/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9-Testing

BIN
SOURCES/sb/rockydup1.x509 Normal file

Binary file not shown.

Binary file not shown.

View File

@ -20,12 +20,13 @@
%define distro_code Blue Onyx
%define major 9
%define minor 0
%define rocky_rel 1%{?rllh:.%{rllh}}%{!?rllh:.14}
%define rocky_rel 1%{?rllh:.%{rllh}}%{!?rllh:.15}
%define rpm_license BSD-3-Clause
%define dist .el%{major}
%define contentdir pub/rocky
%define rltype stable
%define rlosid rocky
%define os_bug_name Rocky-Linux-%{major}
@ -63,8 +64,9 @@
# Resets only the dist tag for the override package. All this does is ensure
# that only the rhel macros and settings are provided - This is useful in the
# case of a build that cannot be properly debranded (eg dotnet).
%if 0%{?rloverride}
%if %{with rloverride}
%define dist .el%{major}.override
%define rlosid rhel
%endif
# End Rocky Override Section
################################################################################
@ -213,7 +215,7 @@ install -d -m 0755 %{buildroot}%{_prefix}/lib
cat > %{buildroot}%{_prefix}/lib/os-release << EOF
NAME="%{distro_name}"
VERSION="%{full_release_version} (%{distro_code})"
ID="%{?rloverride:rhel}%{!?rloverride:rocky}"
ID="%{rlosid}"
ID_LIKE="rhel centos fedora"
VERSION_ID="%{full_release_version}"
PLATFORM_ID="platform:el%{major}"
@ -410,7 +412,7 @@ install -m 0644 %{SOURCE404} %{buildroot}/%{_prefix}/lib/sysctl.d/50-redhat.conf
%{_datadir}/pki/sb-certs/*
%changelog
* Sun May 01 2022 Louis Abel <label@rockylinux.org> - 9.0-1.14
* Sun May 01 2022 Louis Abel <label@rockylinux.org> - 9.0-1.15
- Backport current SB certs for now
- Add logrotate timer and switcheroo
- Add missing macros