Summary:
This requires us to handle decryption each time we reboot in
the upgrade process, so factor that little block out into the
base class so we don't have to keep pasting it. It's also a
bit tricky to integrate into the 'catch a boot loop' code we
have to deal with #1349721, but I think this should work. There
is a matching openqa_fedora_tools diff to generate the disk
image.
Test Plan:
Run the tests, check that they work, run the other
upgrade and encrypted install tests and check they still work
properly too.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D922
Summary:
try to catch a boot loop after `dnf system-upgrade reboot`, if
we do, set the test to soft_fail and pass enforcing=0 to work
around it.
Test Plan:
Run the upgrade_foo tests and see that they now soft
fail instead of hard failing (unless there are any other issues).
Run the upgrade_2_foo tests and make sure they still pass (i.e.
we don't erroneously soft fail them).
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D912
Summary:
as a new, non-fatal test step in the cockpit enrolment test,
because it kinda fits in there; we have an enrolled system with
a web browser *right there*. This will require making the wiki
reporting stuff slightly cleverer so we can say 'report a pass
for this wiki test instance if this test step passed', but that
should be possible. Making this non-fatal means the rest of the
cockpit enrolment test will go ahead even if the freeipa web UI
fails.
The 'check if we can log in' stuff is identical to freeipa_
client_postinstall except with different user names, so we could
potentially factor that out somehow, but I couldn't think of a
super clean way to do it so for now it's just copied.
Note this diff is on top of the freeipa-realmd branch which
is for D894, it's not on top of develop.
Test Plan:
Run the modified test and see if it works. No other
tests are modified, so they should be OK.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D895
Summary:
This is a pretty straightforward IPA joining test. Since I
figured out how to set up a DHCP server for support_server,
let's do the same for the domain controller so we can simplify
these enrolment tests a bit.
We also extend the timeout on installing haveged on the server
a bit (2 minutes is a bit low when it hits a slow metadata
download), and drop an unnecessary clone_host_file from the
cockpit join test (it was only there for testing and the next
operation immediately overwrites it).
Test Plan:
Do a full server DVD test run, check the new test
works and none of the others broke.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D894
Summary:
Set up the support server to provide DHCP/DNS functionality and
an NFS server, providing a kickstart. Add a kickstart test just
like the other root-user-crypted-net kickstart tests except it
gets the kickstart from the support server via NFS. Also add NFS
repository tests and a second support server for Server-dvd-iso
flavor: this test must run on that flavor to ensure that packages
are actually available. The support server just mounts the
attached 'DVD' and exports it via NFS.
Note we don't need to do anything clever to avoid IP conflicts
between the two support servers, because os-autoinst-openvswitch
ensures each worker group is on its own VLAN.
As part of adding the NFS repo tests, I did a bit of cleanup,
moving little things we were repeating a lot into anacondatest,
and sharing the 'check if the repo was used' logic between all
the tests (by making it into a test step that's loaded for all
of them). I also simplified the 'was repo used' checks a bit,
it seems silly to run a 'grep' command inside the VM then have
os-autoinst do a grep on the output (which is effectively what
we were doing before), instead we'll just use a single grep
within the VM, and clean up the messy quoting/escaping a bit.
Test Plan:
Run all tests - at least all repository tests - and
check they work (make sure the tests are actually still sane,
not just that they pass). I've done runs of all the repo tests
and they look good to me, but please double-check. I'm currently
re-running the whole 24-20160609.n.0 test on staging with these
changes.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
Summary:
this is following a SUSE model for tests where we need a server
end but don't want setting up the server to constitute a real
test in itself, we want it to be stable. The 'support_server'
test just boots a pre-built (by createhdds) disk image, sets up
networking, and runs the iSCSI server.
To run the iSCSI test we need to handle networking config in
anaconda (or we would need to set the support server up as a
DHCP server, which may be worth considering), so this adds that.
We also need to be able to specify the target device for a
volume in custom partitioning, so this adds that too.
Test Plan:
Build the necessary support server disk image (use
D883), then run the test and make sure it works. Also make sure
all other tests continue to work.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D884
Summary:
This requires a few other changes:
* turn clone_host_resolv into clone_host_file, letting you clone
any given host file (cloning /etc/hosts seems to make both
server deployment and client enrolment faster/more reliable)
* allow loading of multiple POSTINSTALL tests (so we can share
the freeipa_client_postinstall test). Note this is compatible,
existing uses will work fine
* move initial password change for the IPA test users into the
server deployment test (so the client tests don't conflict over
doing that)
* add GRUB_POSTINSTALL, for specifying boot parameters for boot of
the installed system, and make it work by tweaking _console_wait
_login (doesn't work for _graphical_wait_login yet, as I didn't
need that)
* make the static networking config for tap tests into a library
function so the tests can share it
* handle ABRT problem dirs showing up in /var/spool/abrt as well
as /var/tmp/abrt (because the enrol attempt hits #1330766 and
the crash report shows up in /var/spool/abrt, don't ask me why
the difference, I just work here)
* specify the DNS servers from the worker host's resolv.conf as
the forwarders for the FreeIPA server when deploying it; if we
don't do this, rolekit defaults to using the root servers as
forwarders(!) and thus we get the public, not phx2-appropriate,
results for e.g. mirrors.fedoraproject.org, some of which the
workers can't reach, so PackageKit package install always fails
(boy, was it fun figuring THAT mess out)
Even after all that, the test still doesn't actually pass, but
I'm reasonably confident this is because it's hitting actual bugs,
not because it's broken. It runs into #1330766 nearly every time
(I think I saw *one* time the enrolment actually succeeded), and
seems to run into a subsequent bug I hadn't seen before when
trying to work around that by trying the join again (see
https://bugzilla.redhat.com/show_bug.cgi?id=1330766#c37 ).
Test Plan:
Run the test, see what happens. If you're really lucky,
it'll actually pass. But you'll probably run into #1330766#c37,
I'm mostly posting for comment. You'll need a tap-capable openQA
instance to test this.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D880
Summary:
This adds tests for the Server_cockpit_default and cockpit_basic
test cases. Some notes: I was initially thinking of combining
these into a single test with multiple test modules and coming
up with a system for doing wiki reporting based on individual
test module status, but because we'll also want to do a cockpit
FreeIPA enrol test, I decided against it. We don't really want
to combine all three because then we would skip the cockpit
tests whenever FreeIPA server deployment failed, which isn't
ideal. So since we'll need a separate FreeIPA enrolment test
anyway it doesn't really make sense to go to the trouble of
designing a system for loading multiple postinstall tests (though
I have an idea for that!) and a per-module wiki reporting system.
This was the most minimal and hopefully reliable method for
running Cockpit from a stock Server install that I could think
of. An alternative approach would be to have, say, the most
recent stable Workstation live as a 'stock' asset and have two
tests, one which runs a stock Server install and just waits and
another which boots the live image and accesses the cockpit
running on the other box, but that seems a bit over-complex. It
is not possible to have dependencies between tests for different
ISOs, in case you were wondering about having a Workstation live
test which runs parallel with a Server DVD test, we can't do
that. One funny thing is the font that winds up getting used for
the desktop, but I don't *think* that should be a problem.
Picking needles was a bit tricky; any improvement suggestions
are welcome. I'm hoping it turns out to be safe to rely on some
dbus log messages being present; I think logging into Cockpit
triggers activation of the realmd dbus interface, so there
*should* always be some messages related to that. An alternative
would just be to match on a sliver of the dark grey table header
and the light grey row beneath it and assume that'll always be
the first message (whatever the message is), but then we have to
find some area of the message details screen which is always
present for any message, and it just seems a tad more likely to
result in false passes. Similary I'm making an assumption that
auditd is always going to show up on the first page of the
Services screen and the details screen will always show that
'loaded...enabled' text.
Test Plan:
Run the tests and see if they work! See
https://openqa.stg.fedoraproject.org/tests/21373 and
https://openqa.stg.fedoraproject.org/tests/21371 for my tests.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D874
Summary:
The test here is a bit ugly, but it should work. Better ideas
welcome =)
Test Plan:
Run the test, check it works (and maybe hack it up
a bit and check it fails properly too, it worked first time for
me which is always suspicious)
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D870
this stuff is only appropriate when a switched keyboard layout
is in play. Left unconditional like this, it breaks the normal
encrypted install test case.
Summary:
We'll often be able to reach a root console and upload logs if
this test fails, and we want to do that so we can figure out
what's going on.
Test Plan:
Have the test fail and check that it manages to upload
logs.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D856
Summary:
Requires new needles and test suite and job template, plus a
few tweaks to handle 'switched' keyboard layouts (so we use the
switched layout in the username and password).
Test Plan:
Run the test and see that it...fails. But that's OK!
It's a genuine bug: RHBZ #1333998 . At least make sure it gets
to that point and no other tests have broken and all the needles
look sane.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D846
ARM actually doesn't have "install" test, but in install matrix,
there is test whether ARM disk boots into initial_setup. HDD is saved
after this test for Base tests.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D853
the updates-testing here was never meant to be permanent, it
was only added when the plugin was very new and we knew the
version in stable was busted. The test cases do not say to use
u-t, so let's not.
We've seen this test fail several times recently because of very
slow metadata downloads at this point, so let's give it longer
to run.
This should be a better fix for the problem of the install_done
needle matching in the sidebar gradient while the button is
transitioning. We just assert_screen first, then once we hit it,
we wait_still_screen for 3 seconds, then assert_and_click the
button.
the first param to assert_and_click is *the button number*, not
the wait time. So as soon as I set that for anything it was not
gonna work. So going back to the original approach but fixing
that, hope this works.
Summary:
I really just want to add the desktop_terminal test, but I think
this refactor is in order now. It splits up loading of the
various test phases (much as SUSE do it) and allows us to run
the post-install tests without the install tests, for e.g. I
tweaked things to allow the upgrade tests to use the existing
_wait_login tests for final login and combine the two upgrade
postinstall tests into one simple one.
This comes with a bit of a behaviour change to make graphical
wait login behave the same as console wait login: it will log
in unless USER_LOGIN is set to 'false'. Previously it only
logged in if both USER_LOGIN and USER_PASSWORD were set, which
I don't think ever happened in a graphical test, so we never
actually did a graphical login. The intent here is we should do
a login on the default_install tests. That's going a bit beyond
the test case, but it seems like a reasonable thing to test. We
can set USER_LOGIN to false if we don't want to do it.
Test Plan:
Do a full test run, make sure the new tests work and
no old tests break.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D839
Summary:
These require openQA tap networking to allow the server and
client boxes to communicate, and require masquerading (NAT) so
the server at least can reach a repository (dnf/rolekit really,
really do not want to work without a repo connection).
They use the 'parallel' test support to have the server deploy
run first while the client enrol test waits at the grub menu
until the server is done before it goes ahead.
This is all deployed and working on stg. The really tricky bit
was getting all the openvswitch and firewall config right in
ansible.
We *could* do the server deploy test as a follow-on from the
default install test to save the install, but then we'd have to
teach it to change the hostname and set up static networking
post-install. I'm not sure if it's worth doing that.
This requires the corresponding openqa_fedora_tools commit that
adds the hard disks (containing the kickstarts - it's possible
to get them from remote during install, but we have to set up
name resolution or hard code the IP of the server).
Test Plan:
Deploy this and the openqa_fedora_tools commit,
generate the disks, configure the networking (good luck! See
the docs in openqa_fedora_tools) and see if you can run the
tests. If you're using Docker, uh...sorry. You somehow need to
set things up so the workers can use tap interfaces that can
talk to each other and are NATed to the outside world. Have fun.
I can talk you through it on IRC...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D831
Summary:
Rawhide currently seems to have a bug in spell check dictionary
load, which causes the test to fail as it requires another Done
click. So add a workaround needle that handles this case.
Test Plan:
Apply the patch, run some tests, see if they work. I
did a test run on staging:
https://openqa.stg.fedoraproject.org/tests/13331
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D815
Summary:
BOOT_UPDATES_IMG_URL is a pretty misleading name - it used to
be the actual URL, but now it's simply a boolean that decides
whether we look for the effect of the openQA updates image or
not. TEST_UPDATES seems clearer.
GRUBADD does the same thing as GRUB, on top of it. The point of
this is so we can add an option to the scheduler CLI that lets
you say 'run the normal tests, but with this updates image' -
so we can easily (albeit manually triggered) check the impact
of some anaconda change that needs testing. It should never be
set in the templates or the tests, it's there strictly for the
scheduler (whether that's fedora_openqa_schedule or literally a
person calling `client isos post`) to use as a kind of override.
The tests that test updates image loading will probably fail
when doing this, but all other tests should work as intended,
including ones that specify GRUB, becase the extra params will
just get added on top. That's why I invented a new var instead
of just letting the scheduler override GRUB's value when POST
ing.
Test Plan:
Check the rename didn't break anything (updates tests
still work). Run tests with GRUBADD param, make sure value is
correctly appended to cmdline both when GRUB is also specified
and when it is not.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D801
Summary:
per details in T759, the 'unipony' updates image we use to test
the updates image features doesn't work with latest anaconda (f24
and Rawhide). I've built a new updates image which uses a neat
anaconda feature that allows you to override CSS with a file in
a special location; it sets the background for disk capacity
texts on the INSTALLATION DESTINATION spoke to be pink. This
lets us use a simple needle that just looks for a pink blob on
that spoke, on the basis that it's unlikely there'll ever be a
pink blob there for any other reason, so if there is one, the
updates image worked. There will be an accompanying tools diff
to change the updates disk image to use the new updates image.
Test Plan:
Do a test run and check the updates image tests pass
and no other tests are broken. You'll need to pull in the tools
diff and re-generate the updates disk image to check that test,
the scsi_updates_img test should work with just this diff.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D799
Summary:
these together test QA:Testcase_kickstart_firewall from the
Server matrix. I'll have to come up with some kinda way to
handle reporting that, might be tricky.
Couple of tweaks to overall test flow: tests can now specify
a POSTINSTALL variable which will load a post-install test
following a naming convention, and tests can specify USER_LOGIN
as 'false' to disable the 'log in as a user' step entirely. We
could easily adjust the kickstarts to create a user so the test
could log in as one, but it seems like an unnecessary step and
I liked the idea of allowing the user login to be skipped.
Test Plan:
Schedule 'universal' tests, check the new tests run
and pass or fail as they should, check no other test is broken
by the logic flow changes.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D792
Summary:
I believe the failures in the Server DVD chained Base tests are
happening because the VM is not cleanly shut down before the disk
image is uploaded. This adds a shutdown step to all tests that
upload a disk image (so, for now, just default_install). To keep
things simple it just runs 'shutdown' from a root console, rather
than using graphical desktop shutdown methods, as the aim is only
to make the disk state clean, not to test shutdown exactly.
I've tested this on staging; a Server DVD test run with this
change produced a full set of passed tests, as opposed to all
the Base tests failing because the system didn't boot properly.
Workstation and KDE tests seem to work fine also.
For the record, SUSE does much the same thing as this commit.
Test Plan:
Do a full test run and make sure everything that worked
before still does. Check that all default_install tests have a
_console_shutdown step added, and it works, and all chained tests
work (or fail for some unrelated reason, but make sure this
doesn't break them).
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D787
with Pungi 4, the public repos are product-y, we need to add
/Everything/ to the path between the release and the arch.
Again pushing without review to get the tests working.
With the arrival of Pungi 4, the scheduler is no longer using
fedfind-provided BUILD and FLAVOR values, but ones derived from
Pungi properties. BUILD is now simply the Pungi compose_id.
FLAVOR is produced by joining the Pungi variant, type, and
format with '-' characters as the separators.
Pungi, unfortunately, does not treat 'Rawhide' as a release, it
synthesizes a release number for Rawhide composes and places
that in the compose ID. To cope with that, for now, the
scheduler will set RAWHIDE to '1' if the compose is a Rawhide
one. As we have to adapt all places where we parse the release
in any case, this commit consolidates them into a fedorabase
subroutine.
For the one place where we also used to parse the 'milestone'
from fedfind, there is a placeholder get_milestone subroutine
which currently returns an empty string, as I don't yet have a
good handle on how to draw the kinds of distinctions fedfind
mapped to 'milestone' from Pungi metadata.
Summary:
With the previous change to the server_(sata)_multi test, we
need to adjust the post-install test to use vdb not sdb, the
disks are virtIO now (not PATA as they were with 4.2)
Test Plan:
Check the server_multi test actually completes
properly now
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D732
Summary:
D637 / ec6b3ff4 switched from using needle matches to using
validate_script_output when we want to run a console command
and check the result. validate_script_output is kinda over-
powered when all you want to do is check the command succeeded
(returned 0), though. testapi provides assert_script_run for
doing exactly that - it runs a script and fails if the script
fails (returns anything but 0). This gives us cleaner code and
is slightly more robust; validate_script_output uses the mini
web server on the worker, which I've occasionally seen crap
out, so it seems good to avoid using it when possible. assert_
script_run doesn't need it.
Test Plan: Check all (affected) tests still work properly.
Reviewers: jskladan, garretraziel
Reviewed By: jskladan, garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D714
Summary:
Not much to say, pretty much just implements the test case using
some commands I dug up that give us handy 0/1 exit statuses.
The assert_script_run function (from testapi) simply runs a
command/script and passes or fails based on the exit status;
we use a handy bash-ism when we *want* the exit status to be 1.
Test Plan: Run the test and check that it passes (properly).
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D713
I messed up the last commit and mistakenly included this test,
which I've been working on and is not yet reviewed. The commit
was only supposed to add base_services_start. I'll send a new
diff for service_manipulation.
Summary:
pretty simple, just make sure no services failed to start. We
may run into the rngd issue here, not sure, let's land it and
see!
Test Plan:
I guess run the test and see what happens? I haven't
actually tested this myself yet, so, yeah.
Reviewers: garretraziel, jskladan
Reviewed By: garretraziel, jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D710
Summary:
so here's our first attempt to use the 'carry on from a previous
test' stuff! This adds a base_selinux test that uses a disk
image from a previous default_install run, and adds jobtemplates
to run base_selinux for appropriate products: generic_boot
(for nightly tests), server_dvd, and workstation_live. Note that
you'll want to either update to the newest openQA package I just
built in COPR or create /var/lib/openqa/share/factory/tmp owned
by geekotest; openQA tries to use that directory as MOJO_TMPDIR
but in 4.2, if the directory doesn't exist, it doesn't create it,
and we wind up with the default MOJO_TMPDIR which is /tmp; when
the disk image is uploaded it creates a huge temp file in /tmp
and may well exhaust the available space as it's a tmpfs. I've
backported a recent upstream commit that tries to create the
directory if it doesn't exist, in 4.2-10.
It seems like openQA is smart enough to figure out the
dependencies correctly, so the 'base_selinux' test for each
product depends on the 'default_install' test for the same
product (not any of the other default_install runs) and will
use the hard disk image it produces.
Test Plan:
Do a full test run and make sure base_selinux tests
appear for appropriate products, depend on the correct default_
install test, the default_install test uploads the hard disk
image correctly, and the base_selinux test runs correctly. And
of course that nothing else broke in the process...
Reviewers: jskladan, garretraziel
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D699
