Commit Graph

576 Commits

Author SHA1 Message Date
Adam Williamson
c2e7ddba45 Fix DNS config in realmd_join_sssd and realmd_join_cockpit
Seems what they had before worked until systemd-resolved became
the default; now we need to make sure we do nmcli mod and then
bring the connection down and up, as we do in tapnet.pm. Writing
to resolv.conf is kinda "wrong" for resolved but I don't think
it really breaks anything so I think I'll just leave those bits
in until F32 goes EOL just in case they're still somehow needed
on F31 or F32.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-17 16:01:15 -07:00
Adam Williamson
314f8f84eb Another attempt to improve robustness of desktop_browser
https://openqa.fedoraproject.org/tests/667693#step/desktop_browser/8
shows us matching on Save File when the window is in kind of a
borked state; we'd probably wind up clicking on Open with,
because by the time we click the content of the window will have
moved to where it's actually supposed to be...so let's try this
to slow it down a bit.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-16 11:55:31 -07:00
Adam Williamson
ed5c06baa8 Upload pylorax.log when done building installer image
Handy to have it around to check for oddities.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-15 14:54:44 -07:00
Adam Williamson
a5d37e4c67 Need to bind mount the workarounds repo too
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-15 14:44:34 -07:00
Adam Williamson
e4d89b6d6b Tweak how we add repos to mock config a bit
Not sure if the other way was valid.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-15 14:25:05 -07:00
Adam Williamson
3dd33e3ef1 Use workarounds repo for installer and live build tests
Need this to pull in the kernel fix that's breaking install tests
at the moment.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-15 14:21:07 -07:00
Adam Williamson
9824f20566 Slow down desktop_browser a bit to try and make it more reliable
Getting some odd failures where the downloaded file doesn't show
up in the right place which I think might be due to over rapid
clicking here. Try and slow it down a bit.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-11 16:18:15 -07:00
Adam Williamson
e99a3fbdf9 os_release: adjust for Fedora CoreOS
...which just has to be another special flower.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-02 16:22:20 -07:00
Adam Williamson
478b7eff9e Add initial CoreOS product and test templates
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-02 14:49:29 -07:00
Adam Williamson
170ef0733a Use nmcli for static network stuff, not ifcfg files
This should work even if the ifcfg plugin is not present (hi,
CoreOS) or 'predictable' (har) network names are on.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-02 14:49:29 -07:00
Adam Williamson
52d52c7062 Add a bit of clean up before second run of postgresql-setup
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-01 15:46:10 -07:00
Adam Williamson
a3806af8ee Workaround RHBZ #1872511 by installing langpack
There's a complex bug in current Rawhide affecting the database
server test; it boils down to "deployment fails because LANG is
set to a locale for which the corresponding langpack is not
installed". As we know broadly what's going on there now, let's
work around it with a soft failure so we catch any later bugs in
the process.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-01 15:22:19 -07:00
Adam Williamson
387b09a53a Fix previous zezere change (use single quotes)
Stupid @.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-08-21 16:03:14 -07:00
Adam Williamson
30ab26fbe6 Tweak _iot_zezere_remote to keep retrying ssh for up to 10 mins
The time before the ssh key provision request goes through turns
out to be kinda unpredictable, so instead of just a hardcoded
wait then assuming it should succeed, let's do a loop-y retry
thing instead.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-08-21 15:02:01 -07:00
Adam Williamson
b9f6ecd72d Conditionalize FreeIPA UI change, add 4.8.9 update to workarounds
The FreeIPA UI change that the previous commit adapted to is in
4.8.9. That's stable for Rawhide and F33 already, but still in
testing for F32, and won't go to F31. So we need to make the
change conditional on release number, and we also add the update
to workarounds for F32 so we don't have to do something awkward
while we wait for it to go stable.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-08-21 14:00:42 -07:00
Alexander Bokovoy
5713631a9c Update password change needle and code to FreeIPA 4.8.9
OTP field was moved into the last position in the password change dialog
to prevent issues with OTP code expiring while users enter their
passwords.

Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
2020-08-21 18:05:33 +03:00
Adam Williamson
7682872d95 desktop_login: update reboot flow for GNOME changes in F33+
GNOME now also splits 'Restart...' and 'Power Off...' as KDE
does, so we need to tweak the conditional and add some needles.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-08-17 16:25:32 -07:00
Adam Williamson
025949f483 FreeIPA: fix reverse zone for 172.16.2 network use
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-08-12 11:18:41 -07:00
Adam Williamson
232b224d22 Add 'with swap' tests, drop swap parts from other tests (#180)
In Fedora 33, we generally no longer include a disk-based swap
partition by default (instead swap-on-ZRAM is used, see
https://fedoraproject.org/wiki/Changes/SwapOnZRAM ). This tweaks
our tests to account for that. In tests that aren't to do with
swap at all, we stop including a swap partition in order to be
closer to the default layout. We replace the old _no_swap blivet
and custom tests with _with_swap tests that, as the name implies,
*explicitly include* a swap partition, and adjust the postinstall
test to check the disk swap partition is there.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-08-11 15:09:33 -07:00
Adam Williamson
755ac778cc Wait longer for Zezere provision request to go through
30 seconds doesn't seem to be reliable enough. Let's try 60, if
that's not enough I'll try and think of something smarter.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-08-07 16:25:07 -07:00
Adam Williamson
a0d4c2fc65 Add a keypress to the 'keepalive' loop in desktop_notifications
Just repositioning the mouse appears not to be enough to prevent
the sesssion going idle any more, since the 20200731.n.0 compose.
Not sure what causes this, probably the kernel. Adding a space
keypress seems to help in both KDE and GNOME.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-08-06 18:15:49 -07:00
Adam Williamson
855aaef258 Try harder to be safe when quitting Firefox
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-08-05 13:56:07 -07:00
Adam Williamson
fed44e3fdb wait_still_screen after exiting firefox in server_cockpit_default
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-08-04 18:13:14 -07:00
Adam Williamson
aa41fe4e4e Automate QA:Testcase_Zezere_Ignition
This is a bit complex to automate, because we cannot really use
the production Zezere server (provision.fedoraproject.org) as
the test case shows, as we'd have to solve authentication and
we also don't really want to constantly keep registering new
hosts to it that are going to disappear and never be seen again.

So, instead we'll do it by setting up our *own* Zezere, and
provisioning our IoT system in that. We run two tests. The
'ignition' test is the actual IoT 'device'; all it really does
is boot up, sit around, and wait to be provisioned. The 'server'
test first sets up a Zezere server, then logs into it, adds an
ssh key, claims the IoT device, provisions it, and connects to
it to create a special file which tells the 'ignition' test
everything worked and it can close out.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-07-23 18:01:06 -07:00
Adam Williamson
72edbfe991 Use qemu host IP 172.16.2.2 not 10.0.2.2
This is to make the infra folks happy, apparently using 10.0.x.x
and 10.1.x.x is causing conflicts since our actual infra network
uses those ranges too.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-07-23 16:40:45 -07:00
Adam Williamson
d0274fe7f9 Tweak support_server DHCP range
It started too low, overlapped with some IPs we set static now.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-07-17 14:59:09 -07:00
Adam Williamson
ead05e6c32 Drop explicit install of fedora-repos-modular again
It actually is supposed to be installed by default, so if it's
missing that's a bug. It's been added to comps now so it should
be there from now on.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-07-10 18:41:05 -07:00
Adam Williamson
3f6ac527bb Apply overview workaround to yet one more test
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-07-09 14:29:49 -07:00
Adam Williamson
4a6cd8bcd5 Abstract out overview type-to-search bug workaround
And also use it in GNOME apps settings.pm test.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-07-09 14:25:22 -07:00
Adam Williamson
50d9d8bafa Workaround overview type issue in input test too
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-07-08 17:24:51 -07:00
Adam Williamson
4fee822475 modularity test: install fedora-repos-modular if necessary
It got split out and is not installed by default in 33-0.8. This
is intentional, not a bug, see https://pagure.io/fesco/issue/2114

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-07-08 14:52:11 -07:00
Adam Williamson
919c88f48f Add QA:Testcase_Clevis test (TPM-based automatic decryption)
This adds a test that automates
https://fedoraproject.org/wiki/QA:Testcase_Clevis. It requires
os-autoinst-4.6-18.20200623git5038d8c or newer, and a worker
host in the 'tpm' class which is set up to have an instance of
swtpm running at /tmp/mytpmX , where X is the worker instance
number, for each worker. The Fedora infrastructure ansible
plays have been updated to handle this via an instantiated
systemd service, which other instances can also adopt.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-07-02 16:44:55 -07:00
Adam Williamson
3189f1a62c Tweak NFS repo setup in _support_server to copy all files
`cp -R foo/*` doesn't get all files in `foo/`, it misses hidden
files. This turns out to be a problem with recent anaconda, as
it expects to find a .treeinfo file here. So, let's use rsync.
We could probably do this with cp too but I can't think of the
right arguments right now...

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-06-18 17:00:42 -07:00
Adam Williamson
5e4d1f6e16 base_service_manipulation: use chronyd not sshd
We changed the wiki test case this way, and it should work better
on Cloud images.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-06-17 16:55:55 -07:00
Adam Williamson
6a82a7b222 Tweak still screen waits in _do_install_and_reboot
We still have sliding animation issues sometimes, this should
help.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-06-16 08:36:01 -07:00
Adam Williamson
35f17cb549 Have podman client test sleep a bit after creating the lock
It seems the server can miss it if the client creates it then
immediately exits.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-06-05 12:32:53 -07:00
Adam Williamson
4ae50d0e0e Update install_source_graphical for a change in anaconda
Behaviour of a drop-down box changed, we need to tweak this test.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-06-04 18:55:28 -07:00
Paul Whalen
fd440bfd3a Add QA:Testcase_RpmOstree_Rebase for iot testing (#167)
Signed-off-by: Paul Whalen <pwhalen@fedoraproject.org>
2020-06-04 14:00:32 -04:00
Lukáš Růžička
8c40583ee6 Automate the IoT rpm-ostree package layering test case. 2020-06-02 10:41:31 +02:00
Lukáš Růžička
ce584750b4 Create test for IoT Greenboot.
Finish test and add necessary needles.

Create IOT needle directory and move needles in it.

Delete needle as required by the review.

Add to templates.
2020-05-29 16:25:46 +00:00
Adam Williamson
14b21866f2 Add QA:Testcase_Podman test and run it on IoT (#166)
This adds a pair of tests, one which does almost all the work
from the test case, the other just a client test to check that
we can connect to an HTTP server running in a container on the
host. We also have to bump the _console_wait_login timeout on
this path a bit as we're booting a disk image that was installed
with DHCP working, but we change the network setup so DHCP does
not work any more, and the system spends quite some time trying
to bring the network up on boot before eventually giving up and
proceeding.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-05-28 14:55:27 -07:00
Lukáš Růžička
4d4b2d7739 Finish the post review changes. 2020-05-28 13:32:42 -07:00
Lukáš Růžička
b5169e602b Use existing needles for fs selection. 2020-05-27 15:54:10 -07:00
Lukáš Růžička
18e58a5994 Delete debug print. 2020-05-27 15:54:09 -07:00
Lukáš Růžička
2a3e67991b Whitelist not recognized needles in check-needles.py 2020-05-27 15:54:09 -07:00
Lukáš Růžička
5f1db40ebe Add to templates. 2020-05-27 15:54:09 -07:00
Lukáš Růžička
c42f62da14 Create a test for resizing using custom partitioning 2020-05-27 15:54:09 -07:00
Lukáš Růžička
9efb0e10e6 Create a test to resize LVM partitions using Blivet. 2020-05-27 15:54:09 -07:00
Adam Williamson
a63437527c upgrade_preinstall: use UP1REL not CURRREL
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-05-26 19:04:57 -07:00
Adam Williamson
c9352592e2 desktop_login: correct ownership of home dir after touching it
Here we are creating ~/.config for a newly-created user with root
ownership. We can't leave it that way, as commands run as the
user account won't be able to change it, as they should be able
to. So we need to change the ownership (and, just in case, fix
SELinux contexts) afterwards.

This was the real source of the problem we were seeing (the test
failing early due to the gsettings command which should turn the
screen background black failing).

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-05-25 15:35:54 -07:00