Rolekit is going away. At least for the F29 cycle, though, we
still want to test basically the same functionality. This ports
the 'domain controller role' test to use ipa-server-install
directly rather than rolectl.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It seems that for some reason the localized layout gets loaded
on the installer VTs by this point in time, so we need to load
'us' again for this complex command to work.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We need this as part of the fix for #1593028, at least until
the kernel package is changed to no longer have
CONFIG_CMDLINE="console=ttyAMA0" in the config for aarch64
builds. Fully fixing the bug also requires some change to the
kernel or dracut or something.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The way this currently works, the test unconditionally waits 60
seconds for the "Timbuktu screen" (the warning dialog shown on
pre-release images) to appear when anaconda is starting up, even
if it's testing an image where it doesn't show up. Now we test
Atomic nightlies and live respins and stuff this happens quite a
lot, so let's avoid it. This way if the hub appears during those
60 seconds we'll spot it right away and continue, otherwise we
behave the same as before.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Upstream is gonna change the default from 30 to 0, it seems:
https://github.com/os-autoinst/os-autoinst/pull/965
so let's go ahead and change these two cases where we have no
explicit timeout to have one.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The reason we have all this horrible code to use the commented-
out baseurl lines in the repo files instead of the metalinks
that are usually used is a timing issue with the metalink
system. As a protection against stale mirrors, the metalink
system sends the package manager a list of mirrors *and a list
of recent checksums for the repo metadata*. The package manager
goes out and gets the metadata from the first mirror on the
list, then checksums it; if the checksum isn't on the list of
checksums it got from mirrormanager, it assumes that means the
mirror is stale, and tries the next on the list instead.
The problem is that MM's list of checksums is currently only
updated once an hour (by a cron job). So we kept running into
a problem where, when a test ran just after one of the repos
had been regenerated, the infra mirror it's supposed to use
would be rejected because the checksum wasn't on the list - but
not because the mirror was stale, but because it was too fresh,
it had got the new packages and metadata but mirrormanager's
list of checksums hadn't been updated to include the checksum
for the latest metadata.
All this baseurl munging code was getting ridiculous, though,
what with the tests getting more complicated and errors showing
up in the actual repo files and stuff. It occurred to me that
instead of using the baseurl we can just use the 'mirrorlist'
system instead of 'metalink'. mirrorlist is the dumber, older
system which just provides the package manager a list of mirrors
and nothing else - the whole stale-mirror-detection-checksum
thing does not happen with mirrorlists, the package manager just
tries all the mirrors in order and uses the first that works.
And happily, it's very easy to convert the metalink URLs into
mirrorlist URLs, and it saves all that faffing around trying to
fix up baseurls.
Also, adjust upgrade_boot to do the s/metalink/mirrorlist/
substitution, so upgrade tests don't run into the timing issue
in the steps before the main repo_setup run is done by
upgrade_run, and adjust repo_setup_compose to sub this line out
later.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sometimes rebooting during upgrade tests seems to take longer
than these timeouts allow, so let's bump them a bit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The text changed from 'added repo' to 'enabled repo' in Rawhide
after F28, so let's handle both at least till F28 is EOL.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We've been seeing an odd case lately where the language select
screen is not foregrounded when it appears (so all text is
grey). It happens very occasionally on x86_64, but a lot on
ppc64. To work around this, let's add a needle that matches the
inactive screen, and click on the screen when it appears just
to make sure it's active.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We do the 'desktop update' test for KDE via the notification
icon thingy, and it behaves differently depending on whether it
has already detected there are updates or not. The test only
works at present in the case where it *hasn't* - it expects the
notification icon to be in the extended panel and it expects to
see a 'refresh' button, neither of which is the case if it's
already noticed there are updates to install.
We should also force PackageKit to update its list of available
updates after we set up our 'special' update, otherwise on this
path KDE will only install the updates it found *before* we did
our stuff, and the test will fail as our special update won't be
there.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In F28 tests, the notification 'counter' thing that we rely on
to check there's only *one* notification seems to suddenly
disappear...right around 10 minutes after the desktop starts up,
which is just how long our test idles for to catch crashes that
happen a little after boot. That causes test fails. Let's try
just cutting the wait down to 8 minutes to see if that helps.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE in F28+ seems to show a network connection notification on
live boot, for some reason. Just dismiss it to help the test
pass.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This test expects to pick up from freeipa_webui, but that test
is not fatal (i.e. it can fail and we still carry on to this
one). We should probably make them independent, but for now,
just check if 'test3' (one of the users freeipa_webui creates
and that this test requires) actually exists, at the start. If
not, we can just die right away.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This reduces duplication, but it also means that if the FreeIPA
web UI module fails, the password change module will pick up
from a point where Firefox is set up and won't fail in a bogus
way because it isn't.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This mouse placement is in the middle of where the 'install
addon' popover appears in Firefox, and that seems like it
sometimes causes the popover to immediately disappear in KDE.
This is pretty corner-case-y so I don't wanna report it as a
bug, let's just tweak the cursor hiding location and see if it
solves the problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
...as somehow a Workstation live install currently has the
desktop on tty3, I have no idea why (g-i-s not quitting right?)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is the best workaround I can think of for RHBZ #1553807 -
just check (in the 60 second 'move the mouse' loop) if anaconda
is still running, based on whether its icon is in the top bar
(on Workstation live installs only, obviously).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems with the long period of not doing anything and possibly
with very aggressive timeouts in Fedora 28, Workstation live
wants to blank the screen while we're installing. Stop it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Previous approach wouldn't work for tests that run after the
install test...let's just set a password from a chroot after
install completes. Don't really like this as it changes the
'real' install process a bit, but it's the least invasive short
term fix at least. We can maybe do something more sudo-y later
with a bit more thought.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Workstation live installs for F28+ drop the user creation and
root password panes from anaconda, so we need to not try and
use them any more. But we still want the old behaviour for F27.
I'm hoping this approach will work, if not, we'll find out soon
enough. This removes the install_no_user test for F28+ as it
will no longer differ from the install_default test.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a check that the default package set selection is
actually correct, where possible and appropriate, as part of
the `_software_selection` test. We do this by examining the
`packaging.log` log file and checking which environment group
was selected.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is currently broken, but openQA doesn't notice; we really
should. We could also check the default in other cases, but I
think that's less clear-cut, as it's kind of an anaconda design
choice, it's not mandated in Fedora requirements anywhere.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a problem with using `--releasever=rawhide` for upgrade
tests ATM - see #1531356 . To avoid this, we'll try using the
real Rawhide release number (which I'm adapting the scheduler
code to discover and pass in as `RAWREL`).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a bug causing the 'getting started' screen to crash.
This doesn't really make the system unusable, so treating it
as a soft failure seems appropriate, especially as this will
unblock all the post-install tests on Workstation.
It takes an unusally long time for Modular images to get from
language selection to the 'timbuktu screen', so give 'em a bit
more time. See bug report for more info.
Modular composes don't include these packages, but we need them
to run the web UI tests for FreeIPA and Cockpit. This is the
most reasonable hack I can come up with for now: just use a
non-modular fedora repo to source these packages when doing
Modular compose testing.
If we ever reach an all-Modular future, these packages should
be available in Modular composes I guess, but for now they are
not.
Since April there's been some kind of issue in the F26 base
image which means gnome-initial-setup doesn't run on the first
user login (as it should). The F25 base image is fine. I've
not yet had the time to look into this.
I put a workaround in place to prevent this problem causing
false fails of update tests that boot from the F26 base image,
but didn't apply the same workaround to upgrade tests, which
is why upgrade tests from F26 Workstation always fail - they
expect g-i-s to run on first login (which happens after the
upgrade, in upgrade tests) and it doesn't. So let's just extend
the workaround to apply to upgrade tests too, for now, until we
can figure out why this happens.
The default action on the reboot confirmation dialog changed
from Reboot to Cancel, so when we hit enter, we just cancel the
reboot. Tweak this to hit tab on F27+ (but not <F26, so update
tests continue to work too).
The font Firefox uses when we don't ensure dejavu is installed
seems to bounce around a bit, so let's ensure the dejavu fonts
are there before we start Firefox. Also update a needle for
this.
We can deal with this annoying bug by looking out for the error
we see when it happens, hitting the 'refresh' button again, and
resetting the loop counter to 1 (requires changing the loop to
a C-style loop).
previously required on f25 host with qemu 2.7.1-6
it is not needed anymore on f26 with qemu 2.9.0-5
This reverts commit 0eb15266117aae47f663297f5f332d480d8549b9.
This reverts commit 8b2977f1d618316ded61420df4fc7d2afd07cbf4.
The initial commit was required for PowerPC
until qemu 2.7.1-6 (in f25) not required anymore
since qemu 2.9.0-5 (in f26)
by direct grep of mount command
because nfs mounting not traced in ananconda or packaging log.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
This is required because anaconda is still checking for it
even if not mandatory. Already tracked by bug
https://bugzilla.redhat.com/show_bug.cgi?id=1172791
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
because started qcow2 may be obsolete for update repo.
Note: despite deprecated "update" alias,
continue to use it rather than "upgrade" command.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
PowerPC arches have the empty disk automatically
mounted on the second position in anaconda (vdb).
Thus, trig installation on second disk.
Change disk checking to point on correct disk.
Warning: this is a workaround specific correction
addressing a specific case.
This will have to be improved/changed with a more
generic code as suggested by Adam Williamson in
https://pagure.io/fedora-qa/os-autoinst-distri-fedora/pull-request/1#comment-31858
proposal for a next commit :)
Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
* New OFW variable to identify Open Firmware (used by PowerPC)
* Few needles changes for PowerPC support
* as requested do not change the timers value below for PowerPC
tests/install_source_graphical.pm (300 to 600)
tests/_boot_to_anaconda.pm (300 to 1200)
This will be handled by TIMEOUT_SCALE in templates
Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
Previously we just got a screenshot of some AVCs or coredumps,
which told us something was wrong but didn't really help debug
it. So, let's upload the output of the commands and then also
use the post-fail hook to upload the system logs, which should
give us much more info to work with.
We often want to see the logs from the FreeIPA deployment test
even if that test passes - to look for some detail that doesn't
cause a test to fail, for instance, or if one of the *client*
tests failed for a reason that involves the server. So, let's
do that.
That other one didn't help, so let's try this - try and spot if
the spoke is in the unexpected state (the needle should only
match if the spoke is done processing and still in warning
state, it shouldn't match while the needle is still thinking)
and click through it again if so.
Well, that OCR needle isn't working out so great, as it seems
to match when it shouldn't:
https://openqa.fedoraproject.org/tests/119217#step/_graphical_wait_login/5
So let's try another approach. Ditch the OCR needle and have a
function for checking we're at a clean desktop. It does the
normal needle match, but if we're on GNOME, it also tries
hitting alt+f1 and seeing if we're at the overview; if so, it
hits alt+f1 again (to go back to the desktop) and returns.
IIRC disk_guided_empty is the only storage test that clicks
through INSTALLATION DESTINATION *really* fast, so let's try
adding a 2-second sleep to it to see if it works around the
'sometimes spoke shows as incomplete' bug that cropped up in
F26 and hasn't been fixed yet and tends to cause failures.
Summary:
As we're getting the Workstation dvd-ostree (OStree installer
image) built for Rawhide now, let's try testing it.
Test Plan:
Run the tests on a Rawhide compose that works and
has the image (e.g. 20170615.n.0). Check that new tests work
as expected and old tests are not adversely affected. A
corresponding diff for fedora_openqa will be coming to take
care of scheduling. Note that the tests will often soft fail
for now; this is intentional due to RHBZ#1193590, the bash
prompt for root is incorrect on ostree installs, so I have
added a needle that matches the incorrect prompt but which is
flagged as a workaround needle (so causing the test result to
be a soft fail).
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1211
Summary:
This just adds the FreeIPA web UI and password change
test modules to the FreeIPA upgrade test (client end). It's
useful to check out these features too. We don't need to
separate these into separate jobs, as we're not trying to
fill out different matrix checkboxes here, we just want to
know whether everything works.
Test Plan:
Run the test, see that the modules work properly.
I was actually expecting this to fail given the issues with
the upgrade on the server end, but it seems to pass.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1207
Summary:
This adds an upgrade variant of the FreeIPA tests, with only
the simplest client enrolment (sssd) for now. The server test
starts from the N-1 release and deploys the domain controller
role. The client test similarly starts from the N-1 release
and, when the server is deployed, enrols as a domain client.
Then the server upgrades itself, while the client waits (as the
server is its name server). Then the client upgrades itself,
while the server does some self-checks. The server then waits
for the client to do its checks before decommissioning itself,
as usual. So, summary: *deployment* of both server and client
occurs on N-1, then both are upgraded, then the actual *checks*
occur on N.
In my testing, this all more or less works, except the role
decommission step fails. This failure seems to be a genuine one
so far as I can tell; I intend to file a bug for it soon.
Test Plan:
Run the new tests, check they work. Run the existing
FreeIPA tests (both the compose and the update variants), check
they both behave the same.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1204
Previously this module changed test1's password, so that it
would still be able to work even if the webui test module
failed (so test3/test4 didn't get created). But this means
that, for about 30 seconds, test1's password is 'loremipsum'
not 'batterystaple', and if one of the *other* client test
jobs happens to hit a point where it has to auth as test1
during the 30 seconds test1's password is different, it will
fail. This looks to be what happened to the join_kickstart
test the last few days - it failed because it tried to login
as test1 during the password change window.
By using the test3 user instead (which is only used by the
join_cockpit test, currently) we avoid this problem, at the
cost that the password_change module will always fail if the
webui module fails.
With the latest F26 base images, it seems like g-i-s fails to
run at first login. This is clearly some kind of bug somewhere
and I'll investigate it, but it shouldn't be causing the update
tests to fail - we can still validly run the tests with g-i-s
not running. So for now, adjust the _graphical_wait_login test
to tolerate this behaviour when running update tests.
Summary:
Loading the same module more than once *kinda* works, but it
shows up all kinds of funky in the openQA web interface. There's
a POO for this:
https://progress.opensuse.org/issues/10514
But it doesn't seem like it's going to be resolved immediately,
so in the mean time maybe we should avoid doing it so we don't
have to deal with the weirdness it produces in the web UI. So
here's a kinda icky hack that uses symlinks and stuff to load
multiple instances of 'the same' test module.
Test Plan:
Run an update test, look at how it looks in the web
UI and confirm it's a lot clearer and less buggy. Check there
aren't any bugs in the loading approach. This is deployed on stg
so you can look at it there.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1186
It's not really a good idea to have the comments that explain
the test_flags in *every* test, because they can go stale and
then we either have to live with them being old or update them
all. Like, now. So let's just take 'em all out. There's always
a reference in the openQA and os-autoinst docs, and those get
updated faster.
More importantly, add the new `ignore_failure` flag to relevant
tests - all the tests that don't have the 'important' or
'fatal' flag at present. Upstream killed the 'important' flag
(making all tests 'important' by default), I got it replaced
with the 'ignore_failure' flag, we now need to explicitly mark
all modules we want the 'ignore_failure' behaviour for.
The way this was set up before, if `anaconda_main_hub` matched
immediately but some spoke was still in a 'processing' state,
it only had 30 seconds (default `assert_and_click` timeout) to
complete and allow the 'Begin Installation' button to appear.
It seems unnecessary to match on *both* needles, really, so
let's just give 300 seconds for the `begin_installation` needle
to appear. It's not going to appear on any other screen.
This problem caused a couple of spurious failures today -
https://openqa.fedoraproject.org/tests/77839 and
https://openqa.fedoraproject.org/tests/77858 - because they
took a bit too long for the INSTALLATION DESTINATION spoke to
clear.
Summary:
This adds a new test suite, run for Workstation and KDE live
images, which does not create a user during install. It then
expects initial-setup (KDE) or gnome-initial-setup (Workstation)
to appear after install, creates a user, and proceeds with
normal boot.
Note the ARM image test already covers the initial-setup text
mode, and the ARM minimal image is the only case where that
actually matters (it's not included in Server).
Test Plan:
Run the new tests, check they work. Run all old
tests, check the changes didn't break them.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1185
There's an issue where the follow-on _advisory_post test tries
to log in before the 'login failed' error has cleared. We can
easily avoid this by using tty2 for the login tests, then
_advisory_post will switch to tty3 for its stuff.
Summary:
For some reason, we have `USER_LOGIN` set to 'false' for the KDE
package set install test. I really don't know / remember why
that would be; I'd think we should create a user and log in as
that user to make sure it works properly when installing KDE
from the traditional installer. It's not strictly part of the
package set test, true, but still, seems worth doing.
Also, when `USER_LOGIN` is set to 'false' and the installer runs,
we create a user called 'false'. This doesn't seem like what we
wanted, so let's not do that. I dunno if there are any other
cases besides the KDE one that this commit changes, but still.
Test Plan:
Run the full test suite and look for weirdness, check
KDE package set test works as intended (now creates a user called
'test' and logs in as that user).
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1182
Committing without review as this is pretty trivial and I've
had it on staging for the last few days without issue. Just gets
us somewhat better info for debugging FreeIPA issues.
We used to do this only for KDE, but I've seen the new update
tests sometimes fail at this point for no apparent reason, and
I'm thinking a wait may help (in case they're clicking the
button before it's really 'ready').
This keeps failing because the default `assert_script_run`
timeout changed from 90 to 30 in the last os-autoinst update
(an unintended consequence of a change I made). This has been
fixed upstream, but in the mean time, let's just set an
explicit timeout on the call.
Noticed in e.g. https://openqa.fedoraproject.org/tests/58798
we're doing this wrong, `boot_decrypt` was moved into utils as
a function, but we were still calling it as a method...
Summary:
This adds some logging related to the update testing workflow,
so we have some idea what we actually tested. We log precisely
which packages were actually downloaded from the update - this
is important as updates can be edited and when examining results
we'll want to know which packages actually got used. We also
add a new module which runs at the end of postinstall and tries
to figure out which packages from the update were installed in
the course of the test. This still isn't a guarantee the test
actually *tested them* in any way, but it at least means they
got installed successfully and didn't interfere with the test.
Test Plan:
Run the update test workflow, check the logs get
uploaded and seem accurate (sometimes some RPM garbage messages
wind up in the package log, I'm not too worried about that at
present). Run the compose test workflow and check it didn't
break.
Reviewers: jsedlak
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1149
Summary:
This adds an entirely new workflow for testing distribution
updates. The `ADVISORY` variable is introduced: when set,
`main.pm` will load an early post-install test that sets up
a repository containing the packages from the specified update,
runs `dnf -y update`, and reboots. A new templates file is
added, `templates-updates`, which adds two new flavors called
`updates-server` and `updates-workstation`, each containing
job templates for appropriate post-install tests. Scheduler is
expected to post `ADVISORY=(update ID) HDD_1=(base image)
FLAVOR=updates-(server|workstation)`, where (base image) is one
of the stable release base disk images produced by `createhdds`
and usually used for upgrade testing. This will result in the
appropriate job templates being loaded.
We rejig postinstall test loading and static network config a
bit so that this works for both the 'compose' and 'updates' test
flows: we have to ensure we bring up networking for the tap
tests before we try and install the updates, but still allow
later adjustment of the configuration. We take advantage of the
openQA feature that was added a few months back to run the same
module multiple times, so the `_advisory_update` module can
reboot after installing the updates and the modules that take
care of bootloader, encryption and login get run again. This
looks slightly wacky in the web UI, though - it doesn't show the
later runs of each module.
We also use the recently added feature to specify `+HDD_1` in
the test suites which use a disk image uploaded by an earlier
post-install test, so the test suite value will take priority
over the value POSTed by the scheduler for those tests, and we
will use the uploaded disk image (and not the clean base image
POSTed by the scheduler) for those tests.
My intent here is to enhance the scheduler, adding a consumer
which listens out for critpath updates, and runs this test flow
for each one, then reports the results to ResultsDB where Bodhi
could query and display them. We could also add a list of other
packages to have one or both sets of update tests run on it, I
guess.
Test Plan:
Try a post something like:
HDD_1=disk_f25_server_3_x86_64.img DISTRI=fedora VERSION=25
FLAVOR=updates-server ARCH=x86_64 BUILD=FEDORA-2017-376ae2b92c
ADVISORY=FEDORA-2017-376ae2b92c CURRREL=25 PREVREL=24
Pick an appropriate `ADVISORY` (ideally, one containing some
packages which might actually be involved in the tests), and
matching `FLAVOR` and `HDD_1`. The appropriate tests should run,
a repo with the update packages should be created and enabled
(and dnf update run), and the tests should work properly. Also
test a regular compose run to make sure I didn't break anything.
Reviewers: jskladan, jsedlak
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1143
Summary:
This is to handle cases like #1414904 , where the system boots
to emergency mode. We really need logs to try and debug this.
Test Plan:
Force a test to hit emergency mode somehow (right now
you can just run base_services_start on Rawhide over and over
until you hit #1414904, but there's probably an easier way to
do it, I think there's a systemd boot arg to tell it which target
to boot for e.g.) and check logs get uploaded. Also check this
doesn't break log upload for a 'normal' failure.
Reviewers: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1103
Summary:
This adds a couple of new exporter modules, renames main_common
to utils (this is a better name: openSUSE's main_common is
functions used in main.pm, utils is what they call their module
full of miscellaneous commonly-used functions), and moves a
bunch of utility functions that were previously needlessly
implemented as instance methods in base classes into the
exporter modules. That means we can get rid of all the annoying
$self-> syntax for calling them.
We get rid of `fedorabase` entirely, as it's no longer useful
for anything. Other base classes keep the 'standard' methods
(like `post_fail_hook`) and methods which actually need to be
methods (like `root_console`, whose behaviour is different in
anacondatest and installedtest).
Test Plan:
Do a full test suite run and check everything lines
up. There should be no functional differences from before at all,
this is just a re-org.
Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1080
Summary:
Since 26.17, anaconda shows a warning when the user password
contains non-ASCII characters, and requires a second Done click
to confirm. This change should handle that.
On the 'catch cases where password typing went wrong and re-try'
bit: to keep that, but not re-type the password *every single
time* on the Russian install test, we'd have to make the needle
match the text of the warning. This is problematic because then
that needle will be able to break without us easily noticing;
that's why I wanted to keep the 'warning bar' needle text-free.
Unfortunately, that means we have to skip the protection for
switched-layout installs.
Note the protection was actually not working for any non-English
install anyhow, because the needle had `LANGUAGE-english` as a
tag. We never noticed that. Failed password typing is pretty
rare now, so we can live without the protection - it's just nice
to have it for the English install tests because there's so many
of them.
Test Plan:
Run the Russian install with a recent Rawhide image,
check it clicks 'Done' twice. Note, it will still fail, because
of RHBZ #1413813.
Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1084
Summary:
This adds a new test, memory_check, which just does a default
package set install with `inst.debug` parameter then uploads
the memory usage file (`/tmp/memory.dat`) at the end. We can
have check-compose use the data to analyze changes in memory
usage over time.
Test Plan:
Fire off the Workstation network install image tests
and make sure the memory usage test runs and works on all three
machines. This is live on staging already.
Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1082
The old version wasn't working - it was passing even though two
services fail to start in Workstation currently. I'm really not
sure why the old approach wasn't working, but it wasn't, and I
rather hate `script_output` anyway, so here's a different way
of doing it which relies on `eval`ing `assert_script_output`
instead. (I really should send a PR for a non-fatal version of
assert_script_output...)
Without this, when there are failed services, we get an extra
column to the left of the service names with a unicode dot for
each failed service, which is awkward and screws up the parsing.
Summary:
Include some basic testing of Japanese input, and split the
input testing (including Russian) into a separate module, since
it's not really part of 'login' testing.
Test Plan:
Run the test, and the Russian and French tests too to
make sure they didn't break. Tested on staging. Note the Japanese
test soft fails, intentionally, at present, as I discovered a bug
while working on it:
https://bugzilla.gnome.org/show_bug.cgi?id=776189
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1072
Summary:
This isn't in the criteria, but it's commonly used, so we ought
to test this way. Require authentication for the iSCSI target
and have the test provide the appropriate auth info.
Test Plan:
Run the iscsi test and check it works (you need the
recent fixes for support_server to make *that* work). Nothing
else should be affected.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1070
Summary:
The non-English tests so far did not test that graphical login
worked as expected, which is a fairly large hole. With this
change, they should do a Workstation install and test login to
both GNOME and the console works as expected. KDE is not yet
tested.
As part of this we tweak the implementation of keyboard layout
switching in graphical environments to use a generic function
in main_common which can handle both anaconda and desktops
(just GNOME at present, but should extend easily to any desktop
with a known switcher key and a visible layout indicator),
replacing the anacondatest class method. I kinda don't like that
the test has to specifically tell the function when it's in
anaconda, but I don't think I want to start experimenting with
a global 'test phase' openQA variable or anything like that at
present.
Fixes T842.
Test Plan:
Run the French and Russian install tests and check
they work as expected. Also run an English Workstation install
if you like, and make sure that didn't break. This change is
live on staging ATM, seems to work fine.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Maniphest Tasks: T842
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1071
support_server was failing because of #1402427. I re-generated
the disk image with latest F25 so the fixed selinux-policy is
used, but even then, it seems we have to run 'restorecon' on
rpcbind manually before starting nfs.
Committing without review as this causes failures...try to make
sure we only run the AVC test when it makes sense, and fix
running it on the French install test.
Summary:
This has all console tests check for AVCs (with ausearch) and
crashes (with coredumpctl) at post-install stage. It's non-
fatal as this doesn't really mean the test failed, but we want
to spot when there are unexpected AVCs or crashes.
Test Plan:
Run some console tests, check it works right. I only
tested with one test, since so many are broken on Rawhide ATM
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1066
Committing without review as this is pretty trivial. Running
top *after* all the other collect_data tasks leads to some
meaningless fluctuations in the output; I intended to look for
activity caused by stuff running 'as usual', not activity from
the other collect_data tasks.
Summary:
I've been wanting to do this for a while; I think it'll let us
check for some significant changes between composes. This should
cause runs of a few test cases to collect and upload info on:
* installed packages
* free memory
* disk space
* active services
* 1 minute of CPU usage info (via top)
immediately after install and initial login. In some cases this
will be useful / interesting simply to look at directly, but
we can also have check-compose analyze the data and include
significant changes in its reports.
Test Plan:
Run affected tests, make sure the data collection
works.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1046
Summary:
GNOME's update notification criteria are pretty braindead: it
fires the update check timer once on login then once every hour
thereafter, but only actually checks for and notifies of updates
once a day if it's after 6am(?!?!?!). So we have to do a bunch
of fiddling around to ensure we reliably get a notification.
Move the clock to 6am if it's earlier than that, and reset the
'last update check' timer to 48 hours ago, then log in to GNOME
after that.
Note: I thought this still wasn't fully reliable, but I've looked
into all the recent failures of either test on staging and
there's only one which was really 'no update notification came
up', and the logs clearly indicate PK did run an update check,
so I don't think that was a test bug (I think something went
wrong with the update check). The other failures are all 'GNOME
did something wacky', plus one case where the needle didn't quite
match because I think the match area is slightly too tall; I'll
fix that in a second.
Test Plan:
Run the tests on both KDE and GNOME and check they
work properly now (assuming nothing unrelated breaks, like KDE
crashing...)
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1039
We're not really *testing* shutdown here, we're just shutting
down to make sure the uploaded disk image is clean. So we don't
really mind if shutdown takes a while. It often seems to take
longer than 1 minute on KDE installs and cause a soft fail, so
let's bump the timeout to 3 minutes.
Summary:
os-autoinst implements `script_run` itself now, we aren't
required to implement it ourselves any more. os-autoinst's
implementation is better than ours, as it allows for verifying
the script actually ran (via the redirect-output-to-serial-
console trick).
So this drops our implementation so we'll just use the upstream
one. Where I judged we don't want to bother with the 'check
the command actually ran' feature I've adjusted our direct
`script_run` calls to pass a wait time of 0, which skips the
'wait for command to run' stuff entirely and just does a simple
'type the string and hit enter'.
Because of how the inheritance works, our `assert_script_run`
calls already used the os-autoinst `script_run`, rather than
the one from our distribution.
This should prevent `prepare_test_packages` sometimes going
wrong right after removing the python3-kickstart package, as
we'll properly wait for that removal to complete now (before
we weren't, we'd just start typing the next command while it
was still running, which could result in lost keypresses).
Test Plan:
Check all tests still run OK (I've tried this on
staging and it seems fine).
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1034
Summary:
Since we started using `type_very_safely` for typing the root
password, we starting hitting a race issue. If we complete the
root password spoke so slowly that the software deployment
process completes in the meantime, anaconda will wait until we
complete the spoke then immediately flip to the 'post-install
configuration' step, at which point access to the USER CREATION
spoke is blocked.
We don't hit this case on regular RPM installs or live installs
as the deployment phase still takes a while for both of those,
but we are sometimes hitting it for the Atomic ostree install
image, as the software deployment phase is pretty fast there.
We *could* just not bother creating a user and testing we can
log in as a user for that test, but I don't like that approach,
we *should* be testing that user creation and login works OK
for ostree installs. So instead, let's just type the root
password a bit less safely for ostree installs; this will be
more vulnerable to typing errors but hopefully will avoid the
race problem.
Test Plan:
Run a few Atomic installs, see if they hit the race.
Might need to run other tests at the same time, and you may not
be able to hit it, this is obviously dependent on the I/O of
the worker host...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1022
Summary:
Since we can match on multiple needles, we can drop the loop
from console_login and instead do it this way, which is simpler
and should work better on ARM (the timeouts will scale and
allow ARM to be slow here). Also move it to main_common as
there's no logical reason for it to be a class method.
Also remove the `check` arg. `check` was only set to 0 by two
tests, _console_shutdown and anacondatest's _post_fail_hook.
For _console_shutdown, I think I just wanted to give it the
best possible chance of succeeding. But we're really not going
to lose anything significant by checking, the only case where
check=>0 would've helped is if the 'good' needle had stopped
matching, and all sorts of other tests will fail in that case.
anacondatest was only using it to save a screenshot of whatever
was on the tty if it didn't reach a root console, which doesn't
seem that useful, and we'll get screenshots from check_screen
and assert_screen anyway.
Test Plan:
Run all tests, check they behave as expected and
none inappropriately fails on console login.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1016
As with the text install test, there's an additional choice on
the 'Time settings' path compared to whatever image garret
developed the test on; right after 'Time settings' you have to
pick 'Set timezone' or 'Configure NTP servers'. So adjust the
test to handle this, just like we did there.
Summary:
I started out wanting to fix an issue I noticed today where
graphical upgrade tests were failing because they didn't wait
for the graphical login screen properly; the test was sitting
at the 'full Fedora logo' state of plymouth for a long time,
so the current boot_to_login_screen's wait_still_screen was
triggered by it and the function wound up failing on the
assert_screen, because it was still some time before the real
login screen appeared.
So I tweaked the boot_to_login_screen implementation to work
slightly differently (look for a login screen match, *then* -
if we're dealing with a graphical login - wait_still_screen
to defeat the 'old GPU buffer showing login screen' problem
and assert the login screen again). But while working on it,
I figured we really should consolidate all the various places
that handle the bootloader -> login, we were doing it quite
differently in all sorts of different places. And as part of
that, I converted the base tests to use POSTINSTALL (and thus
go through the shared _wait_login tests) instead of handling
boot themselves. As part of *that*, I tweaked main.pm to not
require all POSTINSTALL tests have the _postinstall suffix on
their names, as it really doesn't make sense, and renamed the
tests.
Test Plan: Run all tests, see if they work.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1015
I have a better fix for this coming, but it's a big change that
requires review, so for now, do this. The tests are actually
failing because the 30 second wait_still_screen is too short(!)
- it's triggering while the test is sitting at the 'full Fedora
logo' bootsplash screen then doing a 30 second assert_screen
graphical_login, which is failing because it actually takes
more than 60 seconds to get from the 'full F' screen to the
login screen. So let's just make the wait_still_screen 45
seconds for now.
use 'ps' output for Xorg and Xwayland. We'd need some new
openQA var to get this right by 'guessing', as it's vt1 for
Workstation when running live - so long as autologin worked -
but vt2 after install. We'd need a var or some other thing to
detect which case we're running in. LIVE doesn't do it, it's
set even when running a post-install test from a live image.
So instead let's just do it a bit more cleverly. This also
gives us a bit of insurance against changes in GDM, SDDM etc.
behaviour, so long as Xwayland or Xorg is running (and we can
add additional processes to the list, like gnome-shell, if
needed/appropriate). We assume the *final* listed process -
i.e. the most recently-started one - will be the desktop;
this covers gdm's behaviour of starting up on vt1 then running
the user session on vt2. We can make this function more complex
and add args if we ever get to the point where we have multi-
user tests running or anything (e.g. allow to pass a username
and only look for that user's processes).
Landing without review as this broke the live variant of the
test on Workstation in production (kinda not sure why it worked
in testing, or I didn't notice that it failed, but never mind).
I've tested it on staging.
When a package is unsigned, KDE will prompt for authentication.
Let's handle this. But count it as a soft fail, because
puiterwijk claims that Rawhide packages will be autosigned
from next week, so this *should* not happen and would indicate
an unsigned package in the repos. We make the KDE 'update
complete' needle area smaller because the wider area includes
some transparency and so will only match if the update applet
is open; this area will match whether it's open (no auth case)
or not open (auth case - the applet seems to disappear after
you provide the password in the auth prompt).
Pushing without review as the test is in production so I want
to make sure it works correctly.
(Also, hey, check out that array match for assert_screen and
that match_has_tag! This is gonna make some things so much
easier...thanks upstream)
Summary:
this more or less covers desktop_error_checks and desktop_
update_notification, though it can't really distinguish
between them easily. All we know is that if both the live and
postinstall versions of this test pass, both of those tests
pass. Any fails will have to be investigated manually.
Test Plan:
Run the tests for both KDE and Workstation, see
what happens. Workstation will fail for F25 and Rawhide at
present, due to SELinux/abrt notifications.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1004
Summary:
Very similar to the CLI update test, but using the desktops'
update applications. This is based off the CLI update test
branch as it uses the shared functions that branch introduced.
We do not use the fake update packages, as they don't really
do anything useful for these tests; for dnf they can help us
distinguish between issues with the dnf mechanism and issues
with the repos, but we can't really tell that in the graphical
case. So we only use the python3-kickstart package here.
Test Plan:
Run the test on both KDE and GNOME and ensure it
performs as intended. I've been testing it on staging, so you
can see it there.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1010
Summary:
this uses a couple of test repos with fake packages to test the
basic dnf mechanisms are working, then messes around with the
python3-kickstart package a bit to try and test the default repo
configuration is working, keys are in place and so on. We use
python3-kickstart because we should be able to rely on the copy
of that package in the 'stable' repo being installable (or else
the compose would have failed), but it shouldn't be vital to
the operation of the system.
Test Plan: Run the test, see if it works.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1006
Summary:
by waiting for the bootloader in _boot_to_anaconda rather than
_console_wait_login, we can ensure that we use the anaconda
post-fail hook and thus get logs uploaded when a kickstart
install fails.
Test Plan:
Run a kickstart install test that fails and check
anaconda logs get uploaded. Then run one that works and make
sure it...still works.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1005
I guess this was developed on F24, or an older F25? There is
an additional choice showing up in production: before the tz
choice, it asks if you want to set the tz or configure NTP. So
we have to pick tz.
Summary:
the main thing this does is try and type slower in X - this
should cover nearly everywhere we type anything in X, and make
it type slower. We also add a bit more safety checking to some
old tests which didn't have it (mainly _do_install_and_reboot)
- wait_still_screen after typing to make sure all the keypresses
were registered before continuing.
This is an attempt to mitigate the problems we've seen where
the wrong text gets typed into the wrong places and the tests
break.
This branch is live on staging atm. It still has *some* issues,
but I do think it's an improvement.
Test Plan:
run the tests (probably several times), compare to
runs without the change, see if it's better or worse...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D993
Summary:
Pretty straightforward tests which deploy the database
server role and exercise it a bit.
Test Plan: Run the tests, check they work properly.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D991
In F25+, Firefox seems to do kerberos auth automatically, so if
we go to the FreeIPA admin URL while kerberos-authed as test4,
we are logged in right away as test4 - neat! But not what we
wanted. So let's kdestroy.
when we run firefox in a bare X session, by default we get an
800x600 firefox in a 1024x768 X server with some dead black
space to the right and bottom of the screen. Now it turns out
that if the mouse is in the dead space, Firefox will not get
any keystrokes we send.
This didn't used to be a problem, but I made it into one with
this os-autoinst change:
https://github.com/os-autoinst/os-autoinst/pull/559
that makes os-autoinst move the cursor to 1023,767 after each
`assert_and_click`, instead of 0x0 as it did before, unless the
cursor has previously been explicitly place somewhere. So in
this case it gets moved to the dead space, and Firefox stops
responding to keypresses after the first `assert_and_click`.
We could equally well fix this by setting the cursor to 0,0
after running Firefox, but I like this more as it makes sure
we won't run into the same problem some other way, and makes
the videos and screenshots look nicer.
This fixes the realmd_join_cockpit test that's been failing
ever since I installed an os-autoinst with that fix. Committing
without review as it's a straightforward fix and I want the
test working again...
I assumed the 'compose location' sent by fedmsg was https, but
in fact it's http (you get redirected to https when you access
it). Could just change the default back to 4, but why not make
it properly robust. Sending without review so this doesn't go
wrong all weekend.
Summary:
we have a long-standing problem with all the tests that hit
the repositories. The tests are triggered as soon as a compose
completes. At this point in time, the compose is not synced to
the mirrors, where the default 'fedora' repo definition looks;
the sync happens after the compose completes, and there is also
a metadata sync step that must happen after *that* before any
operation that uses the 'fedora' repository definition will
actually use the packages from the new compose. Thus all net
install tests and tests that installed packages have been
effectively testing the previous compose, not the current one.
We have some thoughts about how to fix this 'properly' (such
that the openQA tests wouldn't have to do anything special,
but their 'fedora' repository would somehow reflect the compose
under test), but none of them is in place right now or likely
to happen in the short term, so in the mean time this should
deal with most of the issues. With this change, everything but
the default_install tests for the netinst images should use
the compose-under-test's Everything tree instead of the 'fedora'
repository, and thus should install and test the correct
packages.
This relies on a corresponding change to openqa_fedora_tools
to set the LOCATION openQA setting (which is simply the base
location of the compose under test).
Test Plan:
Do a full test run, check (as far as you can) tests run sensibly
and use appropriate repositories.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D989
Summary:
the dictionary error bug was fixed some time back, so drop this
workaround for it.
Test Plan:
Run all tests for F25 and Rawhide and verify they don't need
this workaround any longer.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D988
Summary: Pretty simple!
Test Plan:
Check the upgrade tests work the same as before the
change.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D979
in the recent commit to always use nogpgcheck I inadvertently
broke the upgrade tests, by dropping the `--releasever` from
the `dnf system-upgrade download` command. So fix that.
Summary:
Except when running on the pre-upgrade release in the upgrade
tests (where GPG check should always be OK).
Currently we always need to use --nogpgcheck on Rawhide, and we
must also use it on Branched prior to the Bodhi activation
point. At present we don't really have any simple way to know
when the Bodhi activation point has kicked in. We could assume
that it's safe to do GPG checking for 'candidate' (not nightly)
composes, but even that isn't 100% safe and isn't really the
*right* thing to do. So I think for now it's best to just always
use --nogpgcheck , until we come up with a decent way to check
for Bodhi enablement, or releng figures things out so we can
rely on packages being signed in Rawhide and in Branched before
Bodhi enablement.
Test Plan:
Check the tests all still run, make sure I didn't
miss any dnf calls.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D964
Summary:
pretty simple stuff here. The distinction between 'firefox' and
'browser' is that the 'browser' needles I expect would also be
correct for other default browsers, while the 'firefox' needles
are specific to Firefox. We need '-kde' variants of some Firefox
needles where interface text is included, because the font is
Cantarell in GNOME but whatever the default 'sans' font is in
KDE - I suppose we should really use -thatfontsname rather than
-kde, but I can't think what it's called...
I couldn't do the 'log in to FAS' bit of the test since we don't
really have a sane way to provide a password while not exposing
it to the public.
Test Plan:
Run the test, check it works - for both KDE and
Workstation.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D938
Summary:
again, added as a non-fatal module for realmd_join_cockpit as
it's convenient to do it here. Also abstract a couple of ipa
bits into a new exporter package in the style of SUSE's
mm_network, rather than using ill-fitting class inheritance as
we have before - we should probably convert our existing class
based stuff to work this way.
Also a few minor tweaks and clean-ups of the other tests:
The path in console_login() where we detect login of a regular
user when we want root or vice versa and log out was actually
broken because it would 'wait' for the result of the 'exit'
command, which obviously doesn't work (as it relies on running
another command afterwards, and we're no longer at a shell).
This commit no longer actually uses that path, but I spotted
the bug with an earlier version of this which did, and we may
as well keep the fix.
/var/log/lastlog is an apparently-extremely-large sparse file.
A couple of times it seemed to cause tar to run very slowly
while creating the /var/log archive for upload on failure. It's
no use for diagnosing bugs, so we may as well exclude it from
the archive.
I caught cockpit webUI login failing one time when testing the
test, so threw in a wait_still_screen before starting to type
the URL, as we have for the FreeIPA webUI.
I also caught a timing issue with the openQA webUI policy add
step; the test flips from the Users screen to the HBAC screen
then clicks the 'add' button, but there's actually an identical
'add' button on *both* screens, so it could wind up trying to
click the one on the Users screen instead, if the web UI took
a few milliseconds to switch. So we throw in a needle match to
make sure we're actually on the HBAC screen before clicking the
button.
We make the freeipa_webui test a 'milestone' so that if the
new test fails, restoring to the last-known-good milestone
doesn't take so long; it actually seems like openQA can get
confused and try to cancel the test if restoring the milestone
takes a *really* long time, and wind up with a zombie qemu
process, which isn't good. This seems to avoid that happening.
Test Plan:
In the simple case, just run all the FreeIPA-related
tests on Fedora 24 (as Rawhide is broken) and make sure they all
work properly. To get a bit more advanced you can throw in an
`assert_script_run 'false'` in either of the non-fatal tests to
break it and make sure things go properly when that happens (the
last milestone should be restored - which should be right after
freeipa_webui, sitting at tty1 - and run properly; things are
set up so each test starts with root logged in on tty1).
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D935
Summary:
we can test this quite easily by placing the standard openQA
updates image in the NFS repo used for the NFS repo install
tests. We just have to copy the contents of the ISO (instead of
directly exporting the ISO loop mount as an NFS share) so we
can add this extra file.
At first I planned to combine this with the NFS repo variation
test, but when you use a remote stage2 like this it changes repo
setup such that the packaging.log line we look for to verify
the remote repo was used does not show up, and there's enough
fuzziness in how anaconda-dracut fudges inst.repo and
inst.stage2 that it's probably a good idea to test them
separately anyhow.
Test Plan:
Run the new test and the other NFS tests, make sure
this one works and the others don't break.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D929
Summary:
This requires us to handle decryption each time we reboot in
the upgrade process, so factor that little block out into the
base class so we don't have to keep pasting it. It's also a
bit tricky to integrate into the 'catch a boot loop' code we
have to deal with #1349721, but I think this should work. There
is a matching openqa_fedora_tools diff to generate the disk
image.
Test Plan:
Run the tests, check that they work, run the other
upgrade and encrypted install tests and check they still work
properly too.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D922
Summary:
try to catch a boot loop after `dnf system-upgrade reboot`, if
we do, set the test to soft_fail and pass enforcing=0 to work
around it.
Test Plan:
Run the upgrade_foo tests and see that they now soft
fail instead of hard failing (unless there are any other issues).
Run the upgrade_2_foo tests and make sure they still pass (i.e.
we don't erroneously soft fail them).
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D912
Summary:
as a new, non-fatal test step in the cockpit enrolment test,
because it kinda fits in there; we have an enrolled system with
a web browser *right there*. This will require making the wiki
reporting stuff slightly cleverer so we can say 'report a pass
for this wiki test instance if this test step passed', but that
should be possible. Making this non-fatal means the rest of the
cockpit enrolment test will go ahead even if the freeipa web UI
fails.
The 'check if we can log in' stuff is identical to freeipa_
client_postinstall except with different user names, so we could
potentially factor that out somehow, but I couldn't think of a
super clean way to do it so for now it's just copied.
Note this diff is on top of the freeipa-realmd branch which
is for D894, it's not on top of develop.
Test Plan:
Run the modified test and see if it works. No other
tests are modified, so they should be OK.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D895
Summary:
This is a pretty straightforward IPA joining test. Since I
figured out how to set up a DHCP server for support_server,
let's do the same for the domain controller so we can simplify
these enrolment tests a bit.
We also extend the timeout on installing haveged on the server
a bit (2 minutes is a bit low when it hits a slow metadata
download), and drop an unnecessary clone_host_file from the
cockpit join test (it was only there for testing and the next
operation immediately overwrites it).
Test Plan:
Do a full server DVD test run, check the new test
works and none of the others broke.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D894
Summary:
Set up the support server to provide DHCP/DNS functionality and
an NFS server, providing a kickstart. Add a kickstart test just
like the other root-user-crypted-net kickstart tests except it
gets the kickstart from the support server via NFS. Also add NFS
repository tests and a second support server for Server-dvd-iso
flavor: this test must run on that flavor to ensure that packages
are actually available. The support server just mounts the
attached 'DVD' and exports it via NFS.
Note we don't need to do anything clever to avoid IP conflicts
between the two support servers, because os-autoinst-openvswitch
ensures each worker group is on its own VLAN.
As part of adding the NFS repo tests, I did a bit of cleanup,
moving little things we were repeating a lot into anacondatest,
and sharing the 'check if the repo was used' logic between all
the tests (by making it into a test step that's loaded for all
of them). I also simplified the 'was repo used' checks a bit,
it seems silly to run a 'grep' command inside the VM then have
os-autoinst do a grep on the output (which is effectively what
we were doing before), instead we'll just use a single grep
within the VM, and clean up the messy quoting/escaping a bit.
Test Plan:
Run all tests - at least all repository tests - and
check they work (make sure the tests are actually still sane,
not just that they pass). I've done runs of all the repo tests
and they look good to me, but please double-check. I'm currently
re-running the whole 24-20160609.n.0 test on staging with these
changes.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
Summary:
this is following a SUSE model for tests where we need a server
end but don't want setting up the server to constitute a real
test in itself, we want it to be stable. The 'support_server'
test just boots a pre-built (by createhdds) disk image, sets up
networking, and runs the iSCSI server.
To run the iSCSI test we need to handle networking config in
anaconda (or we would need to set the support server up as a
DHCP server, which may be worth considering), so this adds that.
We also need to be able to specify the target device for a
volume in custom partitioning, so this adds that too.
Test Plan:
Build the necessary support server disk image (use
D883), then run the test and make sure it works. Also make sure
all other tests continue to work.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D884
Summary:
This requires a few other changes:
* turn clone_host_resolv into clone_host_file, letting you clone
any given host file (cloning /etc/hosts seems to make both
server deployment and client enrolment faster/more reliable)
* allow loading of multiple POSTINSTALL tests (so we can share
the freeipa_client_postinstall test). Note this is compatible,
existing uses will work fine
* move initial password change for the IPA test users into the
server deployment test (so the client tests don't conflict over
doing that)
* add GRUB_POSTINSTALL, for specifying boot parameters for boot of
the installed system, and make it work by tweaking _console_wait
_login (doesn't work for _graphical_wait_login yet, as I didn't
need that)
* make the static networking config for tap tests into a library
function so the tests can share it
* handle ABRT problem dirs showing up in /var/spool/abrt as well
as /var/tmp/abrt (because the enrol attempt hits #1330766 and
the crash report shows up in /var/spool/abrt, don't ask me why
the difference, I just work here)
* specify the DNS servers from the worker host's resolv.conf as
the forwarders for the FreeIPA server when deploying it; if we
don't do this, rolekit defaults to using the root servers as
forwarders(!) and thus we get the public, not phx2-appropriate,
results for e.g. mirrors.fedoraproject.org, some of which the
workers can't reach, so PackageKit package install always fails
(boy, was it fun figuring THAT mess out)
Even after all that, the test still doesn't actually pass, but
I'm reasonably confident this is because it's hitting actual bugs,
not because it's broken. It runs into #1330766 nearly every time
(I think I saw *one* time the enrolment actually succeeded), and
seems to run into a subsequent bug I hadn't seen before when
trying to work around that by trying the join again (see
https://bugzilla.redhat.com/show_bug.cgi?id=1330766#c37 ).
Test Plan:
Run the test, see what happens. If you're really lucky,
it'll actually pass. But you'll probably run into #1330766#c37,
I'm mostly posting for comment. You'll need a tap-capable openQA
instance to test this.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D880
Summary:
This adds tests for the Server_cockpit_default and cockpit_basic
test cases. Some notes: I was initially thinking of combining
these into a single test with multiple test modules and coming
up with a system for doing wiki reporting based on individual
test module status, but because we'll also want to do a cockpit
FreeIPA enrol test, I decided against it. We don't really want
to combine all three because then we would skip the cockpit
tests whenever FreeIPA server deployment failed, which isn't
ideal. So since we'll need a separate FreeIPA enrolment test
anyway it doesn't really make sense to go to the trouble of
designing a system for loading multiple postinstall tests (though
I have an idea for that!) and a per-module wiki reporting system.
This was the most minimal and hopefully reliable method for
running Cockpit from a stock Server install that I could think
of. An alternative approach would be to have, say, the most
recent stable Workstation live as a 'stock' asset and have two
tests, one which runs a stock Server install and just waits and
another which boots the live image and accesses the cockpit
running on the other box, but that seems a bit over-complex. It
is not possible to have dependencies between tests for different
ISOs, in case you were wondering about having a Workstation live
test which runs parallel with a Server DVD test, we can't do
that. One funny thing is the font that winds up getting used for
the desktop, but I don't *think* that should be a problem.
Picking needles was a bit tricky; any improvement suggestions
are welcome. I'm hoping it turns out to be safe to rely on some
dbus log messages being present; I think logging into Cockpit
triggers activation of the realmd dbus interface, so there
*should* always be some messages related to that. An alternative
would just be to match on a sliver of the dark grey table header
and the light grey row beneath it and assume that'll always be
the first message (whatever the message is), but then we have to
find some area of the message details screen which is always
present for any message, and it just seems a tad more likely to
result in false passes. Similary I'm making an assumption that
auditd is always going to show up on the first page of the
Services screen and the details screen will always show that
'loaded...enabled' text.
Test Plan:
Run the tests and see if they work! See
https://openqa.stg.fedoraproject.org/tests/21373 and
https://openqa.stg.fedoraproject.org/tests/21371 for my tests.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D874
Summary:
The test here is a bit ugly, but it should work. Better ideas
welcome =)
Test Plan:
Run the test, check it works (and maybe hack it up
a bit and check it fails properly too, it worked first time for
me which is always suspicious)
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D870
this stuff is only appropriate when a switched keyboard layout
is in play. Left unconditional like this, it breaks the normal
encrypted install test case.
Summary:
We'll often be able to reach a root console and upload logs if
this test fails, and we want to do that so we can figure out
what's going on.
Test Plan:
Have the test fail and check that it manages to upload
logs.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D856
Summary:
Requires new needles and test suite and job template, plus a
few tweaks to handle 'switched' keyboard layouts (so we use the
switched layout in the username and password).
Test Plan:
Run the test and see that it...fails. But that's OK!
It's a genuine bug: RHBZ #1333998 . At least make sure it gets
to that point and no other tests have broken and all the needles
look sane.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D846
ARM actually doesn't have "install" test, but in install matrix,
there is test whether ARM disk boots into initial_setup. HDD is saved
after this test for Base tests.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D853
the updates-testing here was never meant to be permanent, it
was only added when the plugin was very new and we knew the
version in stable was busted. The test cases do not say to use
u-t, so let's not.
We've seen this test fail several times recently because of very
slow metadata downloads at this point, so let's give it longer
to run.
This should be a better fix for the problem of the install_done
needle matching in the sidebar gradient while the button is
transitioning. We just assert_screen first, then once we hit it,
we wait_still_screen for 3 seconds, then assert_and_click the
button.
the first param to assert_and_click is *the button number*, not
the wait time. So as soon as I set that for anything it was not
gonna work. So going back to the original approach but fixing
that, hope this works.
Summary:
I really just want to add the desktop_terminal test, but I think
this refactor is in order now. It splits up loading of the
various test phases (much as SUSE do it) and allows us to run
the post-install tests without the install tests, for e.g. I
tweaked things to allow the upgrade tests to use the existing
_wait_login tests for final login and combine the two upgrade
postinstall tests into one simple one.
This comes with a bit of a behaviour change to make graphical
wait login behave the same as console wait login: it will log
in unless USER_LOGIN is set to 'false'. Previously it only
logged in if both USER_LOGIN and USER_PASSWORD were set, which
I don't think ever happened in a graphical test, so we never
actually did a graphical login. The intent here is we should do
a login on the default_install tests. That's going a bit beyond
the test case, but it seems like a reasonable thing to test. We
can set USER_LOGIN to false if we don't want to do it.
Test Plan:
Do a full test run, make sure the new tests work and
no old tests break.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D839
Summary:
These require openQA tap networking to allow the server and
client boxes to communicate, and require masquerading (NAT) so
the server at least can reach a repository (dnf/rolekit really,
really do not want to work without a repo connection).
They use the 'parallel' test support to have the server deploy
run first while the client enrol test waits at the grub menu
until the server is done before it goes ahead.
This is all deployed and working on stg. The really tricky bit
was getting all the openvswitch and firewall config right in
ansible.
We *could* do the server deploy test as a follow-on from the
default install test to save the install, but then we'd have to
teach it to change the hostname and set up static networking
post-install. I'm not sure if it's worth doing that.
This requires the corresponding openqa_fedora_tools commit that
adds the hard disks (containing the kickstarts - it's possible
to get them from remote during install, but we have to set up
name resolution or hard code the IP of the server).
Test Plan:
Deploy this and the openqa_fedora_tools commit,
generate the disks, configure the networking (good luck! See
the docs in openqa_fedora_tools) and see if you can run the
tests. If you're using Docker, uh...sorry. You somehow need to
set things up so the workers can use tap interfaces that can
talk to each other and are NATed to the outside world. Have fun.
I can talk you through it on IRC...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D831
Summary:
Rawhide currently seems to have a bug in spell check dictionary
load, which causes the test to fail as it requires another Done
click. So add a workaround needle that handles this case.
Test Plan:
Apply the patch, run some tests, see if they work. I
did a test run on staging:
https://openqa.stg.fedoraproject.org/tests/13331
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D815
Summary:
BOOT_UPDATES_IMG_URL is a pretty misleading name - it used to
be the actual URL, but now it's simply a boolean that decides
whether we look for the effect of the openQA updates image or
not. TEST_UPDATES seems clearer.
GRUBADD does the same thing as GRUB, on top of it. The point of
this is so we can add an option to the scheduler CLI that lets
you say 'run the normal tests, but with this updates image' -
so we can easily (albeit manually triggered) check the impact
of some anaconda change that needs testing. It should never be
set in the templates or the tests, it's there strictly for the
scheduler (whether that's fedora_openqa_schedule or literally a
person calling `client isos post`) to use as a kind of override.
The tests that test updates image loading will probably fail
when doing this, but all other tests should work as intended,
including ones that specify GRUB, becase the extra params will
just get added on top. That's why I invented a new var instead
of just letting the scheduler override GRUB's value when POST
ing.
Test Plan:
Check the rename didn't break anything (updates tests
still work). Run tests with GRUBADD param, make sure value is
correctly appended to cmdline both when GRUB is also specified
and when it is not.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D801
Summary:
per details in T759, the 'unipony' updates image we use to test
the updates image features doesn't work with latest anaconda (f24
and Rawhide). I've built a new updates image which uses a neat
anaconda feature that allows you to override CSS with a file in
a special location; it sets the background for disk capacity
texts on the INSTALLATION DESTINATION spoke to be pink. This
lets us use a simple needle that just looks for a pink blob on
that spoke, on the basis that it's unlikely there'll ever be a
pink blob there for any other reason, so if there is one, the
updates image worked. There will be an accompanying tools diff
to change the updates disk image to use the new updates image.
Test Plan:
Do a test run and check the updates image tests pass
and no other tests are broken. You'll need to pull in the tools
diff and re-generate the updates disk image to check that test,
the scsi_updates_img test should work with just this diff.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D799
Summary:
these together test QA:Testcase_kickstart_firewall from the
Server matrix. I'll have to come up with some kinda way to
handle reporting that, might be tricky.
Couple of tweaks to overall test flow: tests can now specify
a POSTINSTALL variable which will load a post-install test
following a naming convention, and tests can specify USER_LOGIN
as 'false' to disable the 'log in as a user' step entirely. We
could easily adjust the kickstarts to create a user so the test
could log in as one, but it seems like an unnecessary step and
I liked the idea of allowing the user login to be skipped.
Test Plan:
Schedule 'universal' tests, check the new tests run
and pass or fail as they should, check no other test is broken
by the logic flow changes.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D792
