Since April there's been some kind of issue in the F26 base
image which means gnome-initial-setup doesn't run on the first
user login (as it should). The F25 base image is fine. I've
not yet had the time to look into this.
I put a workaround in place to prevent this problem causing
false fails of update tests that boot from the F26 base image,
but didn't apply the same workaround to upgrade tests, which
is why upgrade tests from F26 Workstation always fail - they
expect g-i-s to run on first login (which happens after the
upgrade, in upgrade tests) and it doesn't. So let's just extend
the workaround to apply to upgrade tests too, for now, until we
can figure out why this happens.
The default action on the reboot confirmation dialog changed
from Reboot to Cancel, so when we hit enter, we just cancel the
reboot. Tweak this to hit tab on F27+ (but not <F26, so update
tests continue to work too).
The font Firefox uses when we don't ensure dejavu is installed
seems to bounce around a bit, so let's ensure the dejavu fonts
are there before we start Firefox. Also update a needle for
this.
We can deal with this annoying bug by looking out for the error
we see when it happens, hitting the 'refresh' button again, and
resetting the loop counter to 1 (requires changing the loop to
a C-style loop).
previously required on f25 host with qemu 2.7.1-6
it is not needed anymore on f26 with qemu 2.9.0-5
This reverts commit 0eb15266117aae47f663297f5f332d480d8549b9.
This reverts commit 8b2977f1d618316ded61420df4fc7d2afd07cbf4.
The initial commit was required for PowerPC
until qemu 2.7.1-6 (in f25) not required anymore
since qemu 2.9.0-5 (in f26)
by direct grep of mount command
because nfs mounting not traced in ananconda or packaging log.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
This is required because anaconda is still checking for it
even if not mandatory. Already tracked by bug
https://bugzilla.redhat.com/show_bug.cgi?id=1172791
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
because started qcow2 may be obsolete for update repo.
Note: despite deprecated "update" alias,
continue to use it rather than "upgrade" command.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
PowerPC arches have the empty disk automatically
mounted on the second position in anaconda (vdb).
Thus, trig installation on second disk.
Change disk checking to point on correct disk.
Warning: this is a workaround specific correction
addressing a specific case.
This will have to be improved/changed with a more
generic code as suggested by Adam Williamson in
https://pagure.io/fedora-qa/os-autoinst-distri-fedora/pull-request/1#comment-31858
proposal for a next commit :)
Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
* New OFW variable to identify Open Firmware (used by PowerPC)
* Few needles changes for PowerPC support
* as requested do not change the timers value below for PowerPC
tests/install_source_graphical.pm (300 to 600)
tests/_boot_to_anaconda.pm (300 to 1200)
This will be handled by TIMEOUT_SCALE in templates
Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
Previously we just got a screenshot of some AVCs or coredumps,
which told us something was wrong but didn't really help debug
it. So, let's upload the output of the commands and then also
use the post-fail hook to upload the system logs, which should
give us much more info to work with.
We often want to see the logs from the FreeIPA deployment test
even if that test passes - to look for some detail that doesn't
cause a test to fail, for instance, or if one of the *client*
tests failed for a reason that involves the server. So, let's
do that.
That other one didn't help, so let's try this - try and spot if
the spoke is in the unexpected state (the needle should only
match if the spoke is done processing and still in warning
state, it shouldn't match while the needle is still thinking)
and click through it again if so.
Well, that OCR needle isn't working out so great, as it seems
to match when it shouldn't:
https://openqa.fedoraproject.org/tests/119217#step/_graphical_wait_login/5
So let's try another approach. Ditch the OCR needle and have a
function for checking we're at a clean desktop. It does the
normal needle match, but if we're on GNOME, it also tries
hitting alt+f1 and seeing if we're at the overview; if so, it
hits alt+f1 again (to go back to the desktop) and returns.
IIRC disk_guided_empty is the only storage test that clicks
through INSTALLATION DESTINATION *really* fast, so let's try
adding a 2-second sleep to it to see if it works around the
'sometimes spoke shows as incomplete' bug that cropped up in
F26 and hasn't been fixed yet and tends to cause failures.
Summary:
As we're getting the Workstation dvd-ostree (OStree installer
image) built for Rawhide now, let's try testing it.
Test Plan:
Run the tests on a Rawhide compose that works and
has the image (e.g. 20170615.n.0). Check that new tests work
as expected and old tests are not adversely affected. A
corresponding diff for fedora_openqa will be coming to take
care of scheduling. Note that the tests will often soft fail
for now; this is intentional due to RHBZ#1193590, the bash
prompt for root is incorrect on ostree installs, so I have
added a needle that matches the incorrect prompt but which is
flagged as a workaround needle (so causing the test result to
be a soft fail).
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1211
Summary:
This just adds the FreeIPA web UI and password change
test modules to the FreeIPA upgrade test (client end). It's
useful to check out these features too. We don't need to
separate these into separate jobs, as we're not trying to
fill out different matrix checkboxes here, we just want to
know whether everything works.
Test Plan:
Run the test, see that the modules work properly.
I was actually expecting this to fail given the issues with
the upgrade on the server end, but it seems to pass.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1207
Summary:
This adds an upgrade variant of the FreeIPA tests, with only
the simplest client enrolment (sssd) for now. The server test
starts from the N-1 release and deploys the domain controller
role. The client test similarly starts from the N-1 release
and, when the server is deployed, enrols as a domain client.
Then the server upgrades itself, while the client waits (as the
server is its name server). Then the client upgrades itself,
while the server does some self-checks. The server then waits
for the client to do its checks before decommissioning itself,
as usual. So, summary: *deployment* of both server and client
occurs on N-1, then both are upgraded, then the actual *checks*
occur on N.
In my testing, this all more or less works, except the role
decommission step fails. This failure seems to be a genuine one
so far as I can tell; I intend to file a bug for it soon.
Test Plan:
Run the new tests, check they work. Run the existing
FreeIPA tests (both the compose and the update variants), check
they both behave the same.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1204
Previously this module changed test1's password, so that it
would still be able to work even if the webui test module
failed (so test3/test4 didn't get created). But this means
that, for about 30 seconds, test1's password is 'loremipsum'
not 'batterystaple', and if one of the *other* client test
jobs happens to hit a point where it has to auth as test1
during the 30 seconds test1's password is different, it will
fail. This looks to be what happened to the join_kickstart
test the last few days - it failed because it tried to login
as test1 during the password change window.
By using the test3 user instead (which is only used by the
join_cockpit test, currently) we avoid this problem, at the
cost that the password_change module will always fail if the
webui module fails.
With the latest F26 base images, it seems like g-i-s fails to
run at first login. This is clearly some kind of bug somewhere
and I'll investigate it, but it shouldn't be causing the update
tests to fail - we can still validly run the tests with g-i-s
not running. So for now, adjust the _graphical_wait_login test
to tolerate this behaviour when running update tests.
Summary:
Loading the same module more than once *kinda* works, but it
shows up all kinds of funky in the openQA web interface. There's
a POO for this:
https://progress.opensuse.org/issues/10514
But it doesn't seem like it's going to be resolved immediately,
so in the mean time maybe we should avoid doing it so we don't
have to deal with the weirdness it produces in the web UI. So
here's a kinda icky hack that uses symlinks and stuff to load
multiple instances of 'the same' test module.
Test Plan:
Run an update test, look at how it looks in the web
UI and confirm it's a lot clearer and less buggy. Check there
aren't any bugs in the loading approach. This is deployed on stg
so you can look at it there.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1186
It's not really a good idea to have the comments that explain
the test_flags in *every* test, because they can go stale and
then we either have to live with them being old or update them
all. Like, now. So let's just take 'em all out. There's always
a reference in the openQA and os-autoinst docs, and those get
updated faster.
More importantly, add the new `ignore_failure` flag to relevant
tests - all the tests that don't have the 'important' or
'fatal' flag at present. Upstream killed the 'important' flag
(making all tests 'important' by default), I got it replaced
with the 'ignore_failure' flag, we now need to explicitly mark
all modules we want the 'ignore_failure' behaviour for.
The way this was set up before, if `anaconda_main_hub` matched
immediately but some spoke was still in a 'processing' state,
it only had 30 seconds (default `assert_and_click` timeout) to
complete and allow the 'Begin Installation' button to appear.
It seems unnecessary to match on *both* needles, really, so
let's just give 300 seconds for the `begin_installation` needle
to appear. It's not going to appear on any other screen.
This problem caused a couple of spurious failures today -
https://openqa.fedoraproject.org/tests/77839 and
https://openqa.fedoraproject.org/tests/77858 - because they
took a bit too long for the INSTALLATION DESTINATION spoke to
clear.
Summary:
This adds a new test suite, run for Workstation and KDE live
images, which does not create a user during install. It then
expects initial-setup (KDE) or gnome-initial-setup (Workstation)
to appear after install, creates a user, and proceeds with
normal boot.
Note the ARM image test already covers the initial-setup text
mode, and the ARM minimal image is the only case where that
actually matters (it's not included in Server).
Test Plan:
Run the new tests, check they work. Run all old
tests, check the changes didn't break them.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1185
There's an issue where the follow-on _advisory_post test tries
to log in before the 'login failed' error has cleared. We can
easily avoid this by using tty2 for the login tests, then
_advisory_post will switch to tty3 for its stuff.
Summary:
For some reason, we have `USER_LOGIN` set to 'false' for the KDE
package set install test. I really don't know / remember why
that would be; I'd think we should create a user and log in as
that user to make sure it works properly when installing KDE
from the traditional installer. It's not strictly part of the
package set test, true, but still, seems worth doing.
Also, when `USER_LOGIN` is set to 'false' and the installer runs,
we create a user called 'false'. This doesn't seem like what we
wanted, so let's not do that. I dunno if there are any other
cases besides the KDE one that this commit changes, but still.
Test Plan:
Run the full test suite and look for weirdness, check
KDE package set test works as intended (now creates a user called
'test' and logs in as that user).
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1182
