os-autoinst-distri-rocky-mi.../lib/anaconda.pm
Adam Williamson 5e628551d8 Use Server not Everything variant for http repos on modular
Modular Server composes don't contain an Everything variant, so
we can't use it for the installation repo.
2017-11-06 16:25:40 -08:00

252 lines
9.8 KiB
Perl

package anaconda;
use strict;
use base 'Exporter';
use Exporter;
use testapi;
use utils;
our @EXPORT = qw/select_disks custom_scheme_select custom_blivet_add_partition custom_change_type custom_change_fs custom_change_device custom_delete_part get_full_repo get_mirrorlist_url/;
sub select_disks {
# Handles disk selection. Has one optional argument - number of
# disks to select. Should be run when main Anaconda hub is
# displayed. Enters disk selection spoke and then ensures that
# required number of disks are selected. Additionally, if
# PARTITIONING variable starts with custom_, selects "custom
# partitioning" checkbox. Example usage:
# after calling `select_disks(2);` from Anaconda main hub,
# installation destination spoke will be displayed and two
# attached disks will be selected for installation.
my %args = (
disks => 1,
iscsi => {},
@_
);
my %iscsi = %{$args{iscsi}};
# Anaconda hub
assert_screen "anaconda_main_hub", 300; #
# Damn animation delay can cause bad clicks here too - wait for it
sleep 1;
assert_and_click "anaconda_main_hub_install_destination";
if (get_var('NUMDISKS') > 1) {
# Multi-disk case. Select however many disks the test needs. If
# $disks is 0, this will do nothing, and 0 disks will be selected.
for my $n (1 .. $args{disks}) {
assert_and_click "anaconda_install_destination_select_disk_$n";
}
}
else {
# Single disk case.
if ($args{disks} == 0) {
# Clicking will *de*-select.
assert_and_click "anaconda_install_destination_select_disk_1";
}
elsif ($args{disks} > 1) {
die "Only one disk is connected! Cannot select $args{disks} disks.";
}
# For exactly 1 disk, we don't need to do anything.
}
# Handle network disks.
if (%iscsi) {
assert_and_click "anaconda_install_destination_add_network_disk";
foreach my $target (keys %iscsi) {
my $ip = $iscsi{$target}->[0];
my $user = $iscsi{$target}->[1];
my $password = $iscsi{$target}->[2];
assert_and_click "anaconda_install_destination_add_iscsi_target";
wait_still_screen 2;
type_safely $ip;
wait_screen_change { send_key "tab"; };
type_safely $target;
# start discovery - three tabs, enter
type_safely "\t\t\t\n";
if ($user && $password) {
assert_and_click "anaconda_install_destination_target_auth_type";
assert_and_click "anaconda_install_destination_target_auth_type_chap";
send_key "tab";
type_safely $user;
send_key "tab";
type_safely $password;
}
assert_and_click "anaconda_install_destination_target_login";
assert_and_click "anaconda_install_destination_select_target";
}
assert_and_click "anaconda_spoke_done";
}
# If this is a custom partitioning test, select custom partitioning. For testing blivet-gui,
# name of test module should start with custom_blivet_, otherwise it should start with custom_.
if (get_var('PARTITIONING') =~ /^custom_blivet_/) {
assert_and_click "anaconda_manual_blivet_partitioning";
} elsif (get_var('PARTITIONING') =~ /^custom_/) {
assert_and_click "anaconda_manual_partitioning";
}
}
sub custom_scheme_select {
# Used for setting custom partitioning scheme (such as LVM).
# Should be called when custom partitioning spoke is displayed.
# Pass the name of the partitioning scheme. Needle
# `anaconda_part_scheme_$scheme` should exist. Example usage:
# `custom_scheme_select("btrfs");` uses needle
# `anaconda_part_scheme_btrfs` to set partition scheme to Btrfs.
my ($scheme) = @_;
assert_and_click "anaconda_part_scheme";
# Move the mouse away from the menu
mouse_set(10, 10);
assert_and_click "anaconda_part_scheme_$scheme";
}
sub custom_blivet_add_partition {
# Used to add partition on blivet-gui partitioning screen
# in Anaconda. Should be called when blivet-gui is displayed and free space is selected.
# You can pass device type for partition (needle tagged anaconda_blivet_devicetype_$devicetype should exist),
# whether partitions should be of RAID1 (devicetype is then automatically handled) - you then
# need to have two disks added, size of that partition in MiBs, desired filesystem of that partition
# (anaconda_blivet_part_fs_$filesystem should exist) and mountpoint of that partition (e. g. string "/boot").
my %args = (
devicetype => "",
raid1 => 0,
size => 0,
filesystem => "",
mountpoint => "",
@_
);
$args{devicetype} = "raid" if $args{raid1};
assert_and_click "anaconda_blivet_part_add";
mouse_set(10, 10);
if ($args{devicetype}) {
assert_and_click "anaconda_blivet_part_devicetype";
mouse_set(10, 10);
assert_and_click "anaconda_blivet_part_devicetype_$args{devicetype}";
}
if ($args{raid1}) {
# for RAID1, two disks should be selected
send_key "tab";
send_key "down";
send_key "spc";
assert_screen "anaconda_blivet_vdb_selected";
assert_and_click "anaconda_blivet_raidlevel_select";
mouse_set(10, 10);
assert_and_click "anaconda_blivet_raidlevel_raid1";
}
if ($args{size}) {
assert_and_click "anaconda_blivet_size_unit";
assert_and_click "anaconda_blivet_size_unit_mib";
send_key "shift-tab"; # input is one tab back from unit selection listbox
# size input can contain whole set of different values, so we can't match it with needle
type_safely $args{size} . "\n";
}
# if no filesystem was specified or filesystem is already selected, do nothing
if ($args{filesystem} && !check_screen("anaconda_blivet_part_fs_$args{filesystem}_selected", 5)) {
assert_and_click "anaconda_blivet_part_fs";
# Move the mouse away from the menu
mouse_set(10, 10);
assert_and_click "anaconda_blivet_part_fs_$args{filesystem}";
}
if ($args{mountpoint}) {
assert_and_click "anaconda_blivet_mountpoint";
type_safely $args{mountpoint} . "\n";
}
assert_and_click "anaconda_blivet_btn_ok";
# select "free space" in blivet-gui if it exists, so we could run this function again to add another partition
if (check_screen("anaconda_blivet_free_space", 5)) {
assert_and_click "anaconda_blivet_free_space";
}
}
sub custom_change_type {
# Used to set different device types for specified partition (e.g.
# RAID). Should be called when custom partitioning spoke is
# displayed. Pass it type of partition and name of partition.
# Needles `anaconda_part_select_$part` and
# `anaconda_part_device_type_$type` should exist. Example usage:
# `custom_change_type("raid", "root");` uses
# `anaconda_part_select_root` and `anaconda_part_device_type_raid`
# needles to set RAID for root partition.
my ($type, $part) = @_;
$part ||= "root";
assert_and_click "anaconda_part_select_$part";
assert_and_click "anaconda_part_device_type";
# Move the mouse away from the menu
mouse_set(10, 10);
assert_and_click "anaconda_part_device_type_$type";
assert_and_click "anaconda_part_update_settings";
}
sub custom_change_fs {
# Used to set different file systems for specified partition.
# Should be called when custom partitioning spoke is displayed.
# Pass filesystem name and name of partition. Needles
# `anaconda_part_select_$part` and `anaconda_part_fs_$fs` should
# exist. Example usage:
# `custom_change_fs("ext3", "root");` uses
# `anaconda_part_select_root` and `anaconda_part_fs_ext3` needles
# to set ext3 file system for root partition.
my ($fs, $part) = @_;
$part ||= "root";
assert_and_click "anaconda_part_select_$part";
# if fs is already set correctly, do nothing
return if (check_screen "anaconda_part_fs_${fs}_selected", 5);
assert_and_click "anaconda_part_fs";
# Move the mouse away from the menu
mouse_set(10, 10);
assert_and_click "anaconda_part_fs_$fs";
assert_and_click "anaconda_part_update_settings";
}
sub custom_change_device {
my ($part, $devices) = @_;
assert_and_click "anaconda_part_select_$part";
assert_and_click "anaconda_part_device_modify";
foreach my $device (split(/ /, $devices)) {
assert_and_click "anaconda_part_device_${device}";
}
assert_and_click "anaconda_part_device_select";
assert_and_click "anaconda_part_update_settings";
}
sub custom_delete_part {
# Used for deletion of previously added partitions in custom
# partitioning spoke. Should be called when custom partitioning
# spoke is displayed. Pass the partition name. Needle
# `anaconda_part_select_$part` should exist. Example usage:
# `custom_delete_part('swap');` uses needle
# `anaconda_part_select_swap` to delete previously added swap
# partition.
my ($part) = @_;
return if not $part;
assert_and_click "anaconda_part_select_$part";
assert_and_click "anaconda_part_delete";
}
sub get_full_repo {
my ($repourl) = @_;
# trivial thing we kept repeating: fill out an HTTP or HTTPS
# repo URL with flavor and arch, leave NFS ones alone (as for
# NFS tests we just use a mounted ISO and the URL is complete)
if ($repourl !~ m/^nfs/) {
# Everything variant doesn't exist for modular composes atm,
# only Server
my $variant = 'Everything';
$variant = 'Server' if (get_var("MODULAR"));
$repourl .= "/${variant}/".get_var("ARCH")."/os";
}
return $repourl;
}
sub get_mirrorlist_url {
return "mirrors.fedoraproject.org/mirrorlist?repo=fedora-" . lc(get_var("VERSION")) . "&arch=" . get_var('ARCH');
}