3d84e2a8c2
Summary: Since we started using `type_very_safely` for typing the root password, we starting hitting a race issue. If we complete the root password spoke so slowly that the software deployment process completes in the meantime, anaconda will wait until we complete the spoke then immediately flip to the 'post-install configuration' step, at which point access to the USER CREATION spoke is blocked. We don't hit this case on regular RPM installs or live installs as the deployment phase still takes a while for both of those, but we are sometimes hitting it for the Atomic ostree install image, as the software deployment phase is pretty fast there. We *could* just not bother creating a user and testing we can log in as a user for that test, but I don't like that approach, we *should* be testing that user creation and login works OK for ostree installs. So instead, let's just type the root password a bit less safely for ostree installs; this will be more vulnerable to typing errors but hopefully will avoid the race problem. Test Plan: Run a few Atomic installs, see if they hit the race. Might need to run other tests at the same time, and you may not be able to hit it, this is obviously dependent on the I/O of the worker host... Reviewers: jskladan, garretraziel Reviewed By: garretraziel Subscribers: tflink Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1022
127 lines
4.4 KiB
Perl
127 lines
4.4 KiB
Perl
use base "anacondatest";
|
|
use strict;
|
|
use testapi;
|
|
use main_common;
|
|
|
|
sub type_user_password {
|
|
my $self = shift;
|
|
my $user_password = get_var("USER_PASSWORD") || "weakpassword";
|
|
if (get_var("SWITCHED_LAYOUT")) {
|
|
# we double the password, the second time using the native
|
|
# layout, so the password has both US and native characters
|
|
$self->switch_layout("us");
|
|
type_very_safely $user_password;
|
|
$self->switch_layout("native");
|
|
type_very_safely $user_password;
|
|
}
|
|
else {
|
|
type_very_safely $user_password;
|
|
}
|
|
}
|
|
|
|
sub run {
|
|
my $self = shift;
|
|
# Anaconda hub
|
|
assert_screen "anaconda_main_hub", 300; #
|
|
|
|
# Begin installation
|
|
# Sometimes, the 'slide in from the top' animation messes with
|
|
# this - by the time we click the button isn't where it was any
|
|
# more. So wait a sec just in case.
|
|
sleep 1;
|
|
assert_and_click "anaconda_main_hub_begin_installation";
|
|
|
|
# Set root password
|
|
my $root_password = get_var("ROOT_PASSWORD") || "weakpassword";
|
|
assert_and_click "anaconda_install_root_password";
|
|
assert_screen "anaconda_install_root_password_screen";
|
|
# wait out animation
|
|
wait_still_screen 2;
|
|
$self->switch_layout("us") if (get_var("SWITCHED_LAYOUT"));
|
|
if (get_var("IMAGETYPE") eq 'dvd-ostree') {
|
|
# we can't type SUPER safely for ostree installer tests, as
|
|
# the install completes quite fast and if we type too slow
|
|
# the USER CREATION spoke may be blocked
|
|
type_safely $root_password;
|
|
wait_screen_change { send_key "tab"; };
|
|
type_safely $root_password;
|
|
}
|
|
else {
|
|
# these screens seems insanely subject to typing errors, so
|
|
# type super safely. This doesn't really slow the test down
|
|
# as we still get done before the install process is complete.
|
|
type_very_safely $root_password;
|
|
wait_screen_change { send_key "tab"; };
|
|
type_very_safely $root_password;
|
|
}
|
|
assert_and_click "anaconda_spoke_done";
|
|
|
|
# Set user details
|
|
# wait out animation
|
|
sleep 3;
|
|
my $user_login = get_var("USER_LOGIN") || "test";
|
|
assert_and_click "anaconda_install_user_creation";
|
|
assert_screen "anaconda_install_user_creation_screen";
|
|
# wait out animation
|
|
wait_still_screen 2;
|
|
type_very_safely $user_login;
|
|
type_very_safely "\t\t\t\t";
|
|
$self->type_user_password();
|
|
wait_screen_change { send_key "tab"; };
|
|
wait_still_screen 2;
|
|
$self->type_user_password();
|
|
# even with all our slow typing this still *sometimes* seems to
|
|
# miss a character, so let's try again if we have a warning bar
|
|
if (check_screen "anaconda_warning_bar", 3) {
|
|
wait_screen_change { send_key "shift-tab"; };
|
|
wait_still_screen 2;
|
|
$self->type_user_password();
|
|
wait_screen_change { send_key "tab"; };
|
|
wait_still_screen 2;
|
|
$self->type_user_password();
|
|
}
|
|
assert_and_click "anaconda_install_user_creation_make_admin";
|
|
assert_and_click "anaconda_spoke_done";
|
|
|
|
# Check username (and hence keyboard layout) if non-English
|
|
if (get_var('LANGUAGE')) {
|
|
assert_screen "anaconda_install_user_created";
|
|
}
|
|
|
|
# With the slow typing - especially with SWITCHED_LAYOUT - we
|
|
# may not complete user creation until anaconda reaches post-install,
|
|
# which causes a 'Finish configuration' button
|
|
if (check_screen "anaconda_install_finish_configuration", 5) {
|
|
assert_and_click "anaconda_install_finish_configuration";
|
|
}
|
|
|
|
# Wait for install to end. Give Rawhide a bit longer, in case
|
|
# we're on a debug kernel, debug kernel installs are really slow.
|
|
my $timeout = 1800;
|
|
if (lc(get_var('VERSION')) eq "rawhide") {
|
|
$timeout = 2400;
|
|
}
|
|
assert_screen "anaconda_install_done", $timeout;
|
|
# wait for transition to complete so we don't click in the sidebar
|
|
wait_still_screen 3;
|
|
assert_and_click "anaconda_install_done";
|
|
if (get_var('LIVE')) {
|
|
# reboot from a console, it's more reliable than the desktop
|
|
# runners
|
|
$self->root_console;
|
|
type_string "reboot\n";
|
|
}
|
|
}
|
|
|
|
sub test_flags {
|
|
# without anything - rollback to 'lastgood' snapshot if failed
|
|
# 'fatal' - whole test suite is in danger if this fails
|
|
# 'milestone' - after this test succeeds, update 'lastgood'
|
|
# 'important' - if this fails, set the overall state to 'fail'
|
|
return { fatal => 1 };
|
|
}
|
|
|
|
1;
|
|
|
|
# vim: set sw=4 et:
|