os-autoinst-distri-rocky-mi.../main.pm
Adam Williamson 0da6652287 add NFS tests (and DHCP/DNS in the support server)
Summary:
Set up the support server to provide DHCP/DNS functionality and
an NFS server, providing a kickstart. Add a kickstart test just
like the other root-user-crypted-net kickstart tests except it
gets the kickstart from the support server via NFS. Also add NFS
repository tests and a second support server for Server-dvd-iso
flavor: this test must run on that flavor to ensure that packages
are actually available. The support server just mounts the
attached 'DVD' and exports it via NFS.

Note we don't need to do anything clever to avoid IP conflicts
between the two support servers, because os-autoinst-openvswitch
ensures each worker group is on its own VLAN.

As part of adding the NFS repo tests, I did a bit of cleanup,
moving little things we were repeating a lot into anacondatest,
and sharing the 'check if the repo was used' logic between all
the tests (by making it into a test step that's loaded for all
of them). I also simplified the 'was repo used' checks a bit,
it seems silly to run a 'grep' command inside the VM then have
os-autoinst do a grep on the output (which is effectively what
we were doing before), instead we'll just use a single grep
within the VM, and clean up the messy quoting/escaping a bit.

Test Plan:
Run all tests - at least all repository tests - and
check they work (make sure the tests are actually still sane,
not just that they pass). I've done runs of all the repo tests
and they look good to me, but please double-check. I'm currently
re-running the whole 24-20160609.n.0 test on staging with these
changes.

Reviewers: jskladan, garretraziel

Reviewed By: garretraziel

Subscribers: tflink

Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
2016-06-13 08:42:30 -07:00

239 lines
8.7 KiB
Perl

# Copyright (C) 2014 SUSE Linux GmbH
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
use strict;
use testapi;
use autotest;
use needle;
# distribution-specific implementations of expected methods
my $distri = testapi::get_var("CASEDIR") . '/lib/fedoradistribution.pm';
require $distri;
testapi::set_distribution(fedoradistribution->new());
## UTILITY SUBROUTINES
# Stolen from openSUSE.
sub unregister_needle_tags($) {
my $tag = shift;
my @a = @{ needle::tags($tag) };
for my $n (@a) { $n->unregister(); }
}
# The purpose of this function is to un-register all needles which have
# at least one tag that starts with a given string (the 'prefix'), if
# it does not have any tag that matches the pattern 'prefix-value', for
# any of the values given in an array. The first argument passed must
# be the prefix; the second must be a reference to the array of values.
# For instance, if the 'prefix' is LANGUAGE and the 'values' are
# ENGLISH and FRENCH, this function would un-reference a needle which
# had only the tag 'LANGUAGE-DUTCH', but it would keep a needle which
# had the tag 'LANGUAGE-ENGLISH', or a needle with no tag starting in
# 'LANGUAGE-' at all.
sub unregister_prefix_tags {
my ($prefix, $valueref) = @_;
NEEDLE: for my $needle ( needle::all() ) {
my $unregister = 0;
for my $tag ( @{$needle->{'tags'}} ) {
if ($tag =~ /^\Q$prefix/) {
# We have at least one tag matching the prefix, so we
# *MAY* want to un-register the needle
$unregister = 1;
for my $value ( @{$valueref} ) {
# At any point if we hit a prefix-value match, we
# know we need to keep this needle and can skip
# to the next
next NEEDLE if ($tag eq "$prefix-$value");
}
}
}
# We get here if we hit no prefix-value match, but we only want
# to unregister the needle if we hit any prefix match, i.e. if
# 'unregister' is 1.
$needle->unregister() if ($unregister);
}
}
sub cleanup_needles() {
if (!get_var('LIVE') and !get_var('CANNED')) {
## Unregister smaller hub needles. Live and 'canned' installers have
## a smaller hub with no repository spokes. On other images we want
## to wait for repository setup to complete, but if we match that
## spoke's "ready" icon, it breaks live and canned because they
## don't have that spoke. So we have a needle which doesn't match
## on that icon, but we unregister it for other installs so they
## don't match on it too soon.
unregister_needle_tags("INSTALLER-smallhub");
}
# Unregister desktop needles of other desktops when DESKTOP is specified
if (get_var('DESKTOP')) {
unregister_prefix_tags('DESKTOP', [ get_var('DESKTOP') ])
}
# Unregister non-language-appropriate needles. See unregister_except_
# tags for details; basically all needles with at least one LANGUAGE-
# tag will be unregistered unless they match the current langauge.
my $langref = [ get_var('LANGUAGE') || 'english' ];
unregister_prefix_tags('LANGUAGE', $langref);
}
$needle::cleanuphandler = \&cleanup_needles;
## TEST LOADING SUBROUTINES
sub load_upgrade_tests() {
# all upgrade tests consist of: preinstall phase (where packages are upgraded and
# dnf-plugin-system-upgrade is installed), run phase (where upgrade is run) and postinstall
# phase (where is checked if fedora was upgraded successfully)
autotest::loadtest "tests/upgrade_preinstall.pm";
autotest::loadtest "tests/upgrade_run.pm";
# set postinstall test
set_var('POSTINSTALL', "upgrade" );
}
sub load_install_tests() {
# normal installation test consists of several phases, from which some of them are
# loaded automatically and others are loaded based on what env variables are set
# generally speaking, install test consists of: boot phase, customization phase, installation
# and reboot phase, postinstall phase
# boot phase is loaded automatically every time
autotest::loadtest "tests/_boot_to_anaconda.pm";
# if this is a kickstart install, that's all folks
return if (get_var("KICKSTART"));
## Networking
if (get_var('ANACONDA_STATIC')) {
autotest::loadtest "tests/_network_static.pm";
}
## Installation source
if (get_var('MIRRORLIST_GRAPHICAL') || get_var("REPOSITORY_GRAPHICAL")) {
autotest::loadtest "tests/install_source_graphical.pm";
autotest::loadtest "tests/_check_install_source.pm";
}
if (get_var("REPOSITORY_VARIATION")){
autotest::loadtest "tests/_check_install_source.pm";
}
if (get_var('LIVE')) {
# No package set selection for lives.
set_var('PACKAGE_SET', "default");
}
## Select package set. Minimal is the default, if 'default' is specified, skip selection.
autotest::loadtest "tests/_software_selection.pm";
## Disk partitioning.
# If PARTITIONING is set, we pick the storage test
# to run based on the value (usually we run the test with the name
# that matches the value, except for a couple of commented cases).
my $storage = '';
my $partitioning = get_var('PARTITIONING');
# if PARTITIONING is unset, or one of [...], use disk_guided_empty,
# which is the simplest / 'default' case.
if (! $partitioning || $partitioning ~~ ['guided_empty', 'guided_free_space']) {
$storage = "tests/disk_guided_empty.pm";
}
else {
$storage = "tests/disk_".$partitioning.".pm";
}
autotest::loadtest $storage;
if (get_var("ENCRYPT_PASSWORD")){
autotest::loadtest "tests/disk_guided_encrypted.pm";
}
# Start installation, set user & root passwords, reboot
# install and reboot phase is loaded automatically every time (except when KICKSTART is set)
autotest::loadtest "tests/_do_install_and_reboot.pm";
}
sub load_postinstall_tests() {
# Unlock encrypted storage volumes, if necessary. The test name here
# follows the 'storage post-install' convention, but must be run earlier.
if (get_var("ENCRYPT_PASSWORD")) {
autotest::loadtest "tests/disk_guided_encrypted_postinstall.pm";
}
# Appropriate login method for install type
if (get_var("DESKTOP")) {
autotest::loadtest "tests/_graphical_wait_login.pm";
}
else {
autotest::loadtest "tests/_console_wait_login.pm";
}
# from now on, we have fully installed and booted system with root/specified user logged in
# If there is a post-install test to verify storage configuration worked
# correctly, run it. Again we determine the test name based on the value
# of PARTITIONING
my $storagepost = '';
if (get_var('PARTITIONING')) {
my $casedir = get_var("CASEDIR");
my $loc = "tests/disk_" . get_var('PARTITIONING') . "_postinstall.pm";
$storagepost = $loc if (-e "$casedir/$loc");
}
autotest::loadtest $storagepost if ($storagepost);
if (get_var("UEFI")) {
autotest::loadtest "tests/uefi_postinstall.pm";
}
# generic post-install test load
if (get_var("POSTINSTALL")) {
my @pis = split(/ /, get_var("POSTINSTALL"));
foreach my $pi (@pis) {
autotest::loadtest "tests/${pi}_postinstall.pm";
}
}
# we should shut down before uploading disk images
if (get_var("STORE_HDD_1") || get_var("PUBLISH_HDD_1")) {
autotest::loadtest "tests/_console_shutdown.pm";
}
}
## LOADING STARTS HERE
# if user set ENTRYPOINT, run required test directly
# (good for tests where it doesn't make sense to use _boot_to_anaconda, _software_selection etc.)
if (get_var("ENTRYPOINT")) {
autotest::loadtest "tests/".get_var("ENTRYPOINT").".pm";
}
elsif (get_var("UPGRADE")) {
load_upgrade_tests;
}
elsif (!get_var("BOOTFROM")) {
# for now we can assume BOOTFROM means this test picks up
# after an install, so we skip to post-install
load_install_tests;
}
if (!get_var("ENTRYPOINT")) {
load_postinstall_tests;
}
1;
# vim: set sw=4 et: