243dfbdacd
On F31 update tests, desktop_vt is broken because the 'ps -C' command is showing 'tty?' as the tty on which Xwayland/Xorg is running. Let's try using loginctl as a workaround for this. This ordering of commands should ensure the ps -C output takes precedence when it's correct. Signed-off-by: Adam Williamson <awilliam@redhat.com>
1116 lines
45 KiB
Perl
1116 lines
45 KiB
Perl
package utils;
|
|
|
|
use strict;
|
|
|
|
use base 'Exporter';
|
|
use Exporter;
|
|
|
|
use lockapi;
|
|
use testapi;
|
|
our @EXPORT = qw/run_with_error_check type_safely type_very_safely desktop_vt boot_to_login_screen console_login console_switch_layout desktop_switch_layout console_loadkeys_us do_bootloader boot_decrypt check_release menu_launch_type start_cockpit repo_setup gnome_initial_setup anaconda_create_user check_desktop_clean download_modularity_tests quit_firefox advisory_get_installed_packages advisory_check_nonmatching_packages start_with_launcher quit_with_shortcut lo_dismiss_tip disable_firefox_studies select_rescue_mode copy_devcdrom_as_isofile bypass_1691487 get_release_number check_left_bar check_top_bar check_prerelease check_version spell_version_number _assert_and_click is_branched rec_log click_unwanted_notifications repos_mirrorlist/;
|
|
|
|
sub run_with_error_check {
|
|
my ($func, $error_screen) = @_;
|
|
die "Error screen appeared" if (check_screen $error_screen, 5);
|
|
$func->();
|
|
die "Error screen appeared" if (check_screen $error_screen, 5);
|
|
}
|
|
|
|
# high-level 'type this string quite safely but reasonably fast'
|
|
# function whose specific implementation may vary
|
|
sub type_safely {
|
|
my $string = shift;
|
|
type_string($string, wait_screen_change => 3, max_interval => 20);
|
|
# similarity level 45 as there will commonly be a flashing
|
|
# cursor and the default level (47) is slightly too tight
|
|
wait_still_screen(stilltime=>2, similarity_level=>45);
|
|
}
|
|
|
|
# high-level 'type this string extremely safely and rather slow'
|
|
# function whose specific implementation may vary
|
|
sub type_very_safely {
|
|
my $string = shift;
|
|
type_string($string, wait_screen_change => 1, max_interval => 1);
|
|
# similarity level 45 as there will commonly be a flashing
|
|
# cursor and the default level (47) is slightly too tight
|
|
wait_still_screen(stilltime=>5, similarity_level=>45);
|
|
}
|
|
|
|
# Figure out what tty the desktop is on, switch to it. Assumes we're
|
|
# at a root console
|
|
sub desktop_vt {
|
|
# use loginctl or ps to find the tty of test's session (loginctl)
|
|
# or Xwayland or Xorg (ps); as of 2019-09 on F31 update tests
|
|
# ps -C is giving 'tty?', so adding loginctl works around that
|
|
my $xout;
|
|
# don't fail test if we don't find any process, just guess tty1
|
|
eval { $xout = script_output ' loginctl | grep test; ps -C Xwayland,Xorg -o tty --no-headers'; };
|
|
my $tty = 1; # default
|
|
while ($xout =~ /tty(\d)/g) {
|
|
$tty = $1; # most recent match is probably best
|
|
}
|
|
send_key "ctrl-alt-f${tty}";
|
|
}
|
|
|
|
# Wait for login screen to appear. Handle the annoying GPU buffer
|
|
# problem where we see a stale copy of the login screen from the
|
|
# previous boot. Will suffer a ~30 second delay if there's a chance
|
|
# we're *already at* the expected login screen.
|
|
sub boot_to_login_screen {
|
|
my %args = @_;
|
|
$args{timeout} //= 300;
|
|
# we may start at a screen that matches one of the needles; if so,
|
|
# wait till we don't (e.g. when rebooting at end of live install,
|
|
# we match text_console_login until the console disappears)
|
|
my $count = 5;
|
|
while (check_screen("login_screen", 3) && $count > 0) {
|
|
sleep 5;
|
|
$count -= 1;
|
|
}
|
|
assert_screen "login_screen", $args{timeout};
|
|
if (match_has_tag "graphical_login") {
|
|
wait_still_screen 10, 30;
|
|
assert_screen "login_screen";
|
|
}
|
|
}
|
|
|
|
# Switch keyboard layouts at a console
|
|
sub console_switch_layout {
|
|
# switcher key combo differs between layouts, for console
|
|
if (get_var("LANGUAGE", "") eq "russian") {
|
|
send_key "ctrl-shift";
|
|
}
|
|
}
|
|
|
|
# switch to 'native' or 'ascii' input method in a graphical desktop
|
|
# usually switched configs have one mode for inputting ascii-ish
|
|
# characters (which may be 'us' keyboard layout, or a local layout for
|
|
# inputting ascii like 'jp') and one mode for inputting native
|
|
# characters (which may be another keyboard layout, like 'ru', or an
|
|
# input method for more complex languages)
|
|
# 'environment' can be a desktop name or 'anaconda' for anaconda
|
|
# if not set, will use get_var('DESKTOP') or default 'anaconda'
|
|
sub desktop_switch_layout {
|
|
my ($layout, $environment) = @_;
|
|
$layout //= 'ascii';
|
|
$environment //= get_var("DESKTOP", "anaconda");
|
|
# if already selected, we're good
|
|
return if (check_screen "${environment}_layout_${layout}", 3);
|
|
# otherwise we need to switch
|
|
my $switcher = "alt-shift"; # anaconda
|
|
$switcher = "super-spc" if $environment eq 'gnome';
|
|
# KDE? not used yet
|
|
send_key $switcher;
|
|
assert_screen "${environment}_layout_${layout}", 3;
|
|
}
|
|
|
|
# this is used at the end of console_login to check if we got a prompt
|
|
# indicating that we got a bash shell, but sourcing of /etc/bashrc
|
|
# failed (the prompt looks different in this case). We treat this as
|
|
# a soft failure.
|
|
sub _console_login_finish {
|
|
if (match_has_tag "bash_noprofile") {
|
|
record_soft_failure "It looks like profile sourcing failed";
|
|
}
|
|
}
|
|
|
|
# this subroutine handles logging in as a root/specified user into console
|
|
# it requires TTY to be already displayed (handled by the root_console()
|
|
# method of distribution classes)
|
|
sub console_login {
|
|
my %args = (
|
|
user => "root",
|
|
password => get_var("ROOT_PASSWORD", "weakpassword"),
|
|
# default is 10 seconds, set below, 0 means 'default'
|
|
timeout => 0,
|
|
@_);
|
|
$args{timeout} ||= 10;
|
|
|
|
# There's a timing problem when we switch from a logged-in console
|
|
# to a non-logged in console and immediately call this function;
|
|
# if the switch lags a bit, this function will match one of the
|
|
# logged-in needles for the console we switched from, and get out
|
|
# of sync (e.g. https://openqa.stg.fedoraproject.org/tests/1664 )
|
|
# To avoid this, we'll sleep a few seconds before starting
|
|
sleep 4;
|
|
|
|
my $good = "";
|
|
my $bad = "";
|
|
if ($args{user} eq "root") {
|
|
$good = "root_console";
|
|
$bad = "user_console";
|
|
}
|
|
else {
|
|
$good = "user_console";
|
|
$bad = "root_console";
|
|
}
|
|
|
|
if (check_screen $bad, 0) {
|
|
# we don't want to 'wait' for this as it won't return
|
|
script_run "exit", 0;
|
|
sleep 2;
|
|
}
|
|
|
|
assert_screen [$good, 'text_console_login'], $args{timeout};
|
|
# if we're already logged in, all is good
|
|
if (match_has_tag $good) {
|
|
_console_login_finish();
|
|
return;
|
|
}
|
|
# otherwise, we saw the login prompt, type the username
|
|
type_string("$args{user}\n");
|
|
assert_screen [$good, 'console_password_required'], 30;
|
|
# on a live image, just the user name will be enough
|
|
if (match_has_tag $good) {
|
|
_console_login_finish();
|
|
return;
|
|
}
|
|
# otherwise, type the password
|
|
type_string "$args{password}";
|
|
if (get_var("SWITCHED_LAYOUT") and $args{user} ne "root") {
|
|
# see _do_install_and_reboot; when layout is switched
|
|
# user password is doubled to contain both US and native
|
|
# chars
|
|
console_switch_layout;
|
|
type_string "$args{password}";
|
|
console_switch_layout;
|
|
}
|
|
send_key "ret";
|
|
# make sure we reached the console
|
|
unless (check_screen($good, 30)) {
|
|
# as of 2018-10 we have a bug in sssd which makes this take
|
|
# unusually long in the FreeIPA tests, let's allow longer,
|
|
# with a soft fail - RHBZ #1644919
|
|
record_soft_failure "Console login is taking a long time - #1644919?";
|
|
my $timeout = 30;
|
|
# even an extra 30 secs isn't long enough on aarch64...
|
|
$timeout = 90 if (get_var("ARCH") eq "aarch64");
|
|
assert_screen($good, $timeout);
|
|
}
|
|
_console_login_finish();
|
|
}
|
|
|
|
# load US layout (from a root console)
|
|
sub console_loadkeys_us {
|
|
if (get_var('LANGUAGE') eq 'french') {
|
|
script_run "loqdkeys us", 0;
|
|
# might take a few secs
|
|
sleep 3;
|
|
}
|
|
elsif (get_var('LANGUAGE') eq 'japanese') {
|
|
script_run "loadkeys us", 0;
|
|
sleep 3;
|
|
}
|
|
}
|
|
|
|
sub do_bootloader {
|
|
# Handle bootloader screen. 'bootloader' is syslinux or grub.
|
|
# 'uefi' is whether this is a UEFI install, will get_var UEFI if
|
|
# not explicitly set. 'postinstall' is whether we're on an
|
|
# installed system or at the installer (this matters for how many
|
|
# times we press 'down' to find the kernel line when typing args).
|
|
# 'args' is a string of extra kernel args, if desired. 'mutex' is
|
|
# a parallel test mutex lock to wait for before proceeding, if
|
|
# desired. 'first' is whether to hit 'up' a couple of times to
|
|
# make sure we boot the first menu entry. 'timeout' is how long to
|
|
# wait for the bootloader screen.
|
|
my %args = (
|
|
postinstall => 0,
|
|
params => "",
|
|
mutex => "",
|
|
first => 1,
|
|
timeout => 30,
|
|
uefi => get_var("UEFI"),
|
|
ofw => get_var("OFW"),
|
|
@_
|
|
);
|
|
# if not postinstall not UEFI and not ofw, syslinux
|
|
$args{bootloader} //= ($args{uefi} || $args{postinstall} || $args{ofw}) ? "grub" : "syslinux";
|
|
# we use the firmware-type specific tags because we want to be
|
|
# sure we actually did a UEFI boot
|
|
my $boottag = "bootloader_bios";
|
|
$boottag = "bootloader_uefi" if ($args{uefi});
|
|
assert_screen $boottag, $args{timeout};
|
|
if ($args{mutex}) {
|
|
# cancel countdown
|
|
send_key "left";
|
|
mutex_lock $args{mutex};
|
|
mutex_unlock $args{mutex};
|
|
}
|
|
if ($args{first}) {
|
|
# press up a couple of times to make sure we're at first entry
|
|
send_key "up";
|
|
send_key "up";
|
|
}
|
|
if ($args{params}) {
|
|
if ($args{bootloader} eq "syslinux") {
|
|
send_key "tab";
|
|
}
|
|
else {
|
|
send_key "e";
|
|
# we need to get to the 'linux' line here, and grub does
|
|
# not have any easy way to do that. Depending on the arch
|
|
# and the Fedora release, we may have to press 'down' 2
|
|
# times, or 13, or 12, or some other goddamn number. That
|
|
# got painful to keep track of, so let's go bottom-up:
|
|
# press 'down' 50 times to make sure we're at the bottom,
|
|
# then 'up' twice to reach the 'linux' line. This seems to
|
|
# work in every permutation I can think of to test.
|
|
for (1 .. 50) {
|
|
send_key 'down';
|
|
}
|
|
sleep 1;
|
|
send_key 'up';
|
|
sleep 1;
|
|
send_key 'up';
|
|
send_key "end";
|
|
}
|
|
# Change type_string by type_safely because keyboard polling
|
|
# in SLOF usb-xhci driver failed sometimes in powerpc
|
|
type_safely " $args{params}";
|
|
}
|
|
save_screenshot; # for debug purpose
|
|
# ctrl-X boots from grub editor mode
|
|
send_key "ctrl-x";
|
|
# return boots all other cases
|
|
send_key "ret";
|
|
}
|
|
|
|
sub boot_decrypt {
|
|
# decrypt storage during boot; arg is timeout (in seconds)
|
|
my $timeout = shift || 60;
|
|
assert_screen "boot_enter_passphrase", $timeout;
|
|
type_string get_var("ENCRYPT_PASSWORD");
|
|
send_key "ret";
|
|
}
|
|
|
|
sub check_release {
|
|
# Checks whether the installed release matches a given value. E.g.
|
|
# `check_release(23)` checks whether the installed system is
|
|
# Fedora 23. The value can be 'Rawhide' or a Fedora release
|
|
# number; often you will want to use `get_var('VERSION')`. Expects
|
|
# a console prompt to be active when it is called.
|
|
my $release = shift;
|
|
my $check_command = "grep SUPPORT_PRODUCT_VERSION /etc/os-release";
|
|
validate_script_output $check_command, sub { $_ =~ m/REDHAT_SUPPORT_PRODUCT_VERSION=$release/ };
|
|
}
|
|
|
|
sub menu_launch_type {
|
|
# Launch an application in a graphical environment, by opening a
|
|
# launcher, typing the specified string and hitting enter. Pass
|
|
# the string to be typed to launch whatever it is you want.
|
|
my $app = shift;
|
|
# super does not work on KDE, because fml
|
|
send_key 'alt-f1';
|
|
# srsly KDE y u so slo
|
|
wait_still_screen 3;
|
|
type_very_safely $app;
|
|
send_key 'ret';
|
|
}
|
|
|
|
sub disable_firefox_studies {
|
|
# create a config file that disables Firefox's dumb 'shield
|
|
# studies' so they don't break tests:
|
|
# https://bugzilla.mozilla.org/show_bug.cgi?id=1529626
|
|
assert_script_run 'mkdir -p $(rpm --eval %_libdir)/firefox/distribution';
|
|
assert_script_run 'printf \'{"policies": {"DisableFirefoxStudies": true}}\' > $(rpm --eval %_libdir)/firefox/distribution/policies.json';
|
|
}
|
|
|
|
sub start_cockpit {
|
|
# Starting from a console, get to a browser with Cockpit (running
|
|
# on localhost) shown. If $login is truth-y, also log in. Assumes
|
|
# X and Firefox are installed.
|
|
my $login = shift || 0;
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1439429
|
|
assert_script_run "sed -i -e 's,enable_xauth=1,enable_xauth=0,g' /usr/bin/startx";
|
|
disable_firefox_studies;
|
|
# run firefox directly in X as root. never do this, kids!
|
|
type_string "startx /usr/bin/firefox -width 1024 -height 768 http://localhost:9090\n";
|
|
assert_screen "cockpit_login", 45;
|
|
# this happened on early Modular Server composes...
|
|
record_soft_failure "Unbranded Cockpit" if (match_has_tag "cockpit_login_unbranded");
|
|
# login screen has a flashing cursor so screen is not still at level 47
|
|
wait_still_screen(stilltime=>5, similarity_level=>45);
|
|
if ($login) {
|
|
type_safely "root";
|
|
wait_screen_change { send_key "tab"; };
|
|
type_safely get_var("ROOT_PASSWORD", "weakpassword");
|
|
send_key "ret";
|
|
assert_screen "cockpit_main";
|
|
# wait for any animation or other weirdness
|
|
# can't use wait_still_screen because of that damn graph
|
|
sleep 3;
|
|
}
|
|
}
|
|
|
|
sub repos_mirrorlist {
|
|
# Use mirrorlist not metalink so we don't hit the timing issue where
|
|
# the infra repo is updated but mirrormanager metadata checksums
|
|
# have not been updated, and the infra repo is rejected as its
|
|
# metadata checksum isn't known to MM
|
|
my $files = shift;
|
|
my $files ||= "/etc/yum.repos.d/fedora*.repo";
|
|
assert_script_run "sed -i -e 's,metalink,mirrorlist,g' ${files}";
|
|
}
|
|
|
|
sub _repo_setup_compose {
|
|
# Appropriate repo setup steps for testing a compose
|
|
# disable updates-testing and updates and use the compose location
|
|
# as the target for fedora and rawhide rather than mirrorlist, so
|
|
# tools see only packages from the compose under test
|
|
my $location = get_var("LOCATION");
|
|
return unless $location;
|
|
assert_script_run 'dnf config-manager --set-disabled updates-testing updates';
|
|
# script_run returns the exit code, so 'unless' here means 'if the file exists'
|
|
unless (script_run 'test -f /etc/yum.repos.d/fedora-updates-modular.repo') {
|
|
assert_script_run 'dnf config-manager --set-disabled updates-testing-modular updates-modular';
|
|
}
|
|
# we use script_run here as the rawhide and modular repo files
|
|
# won't always exist and we don't want to bother testing or
|
|
# predicting their existence; assert_script_run doesn't buy you
|
|
# much with sed as it'll return 0 even if it replaced nothing
|
|
script_run "sed -i -e 's,^metalink,#metalink,g' -e 's,^mirrorlist,#mirrorlist,g' -e 's,^#baseurl.*basearch,baseurl=${location}/Everything/\$basearch,g' -e 's,^#baseurl.*source,baseurl=${location}/Everything/source,g' /etc/yum.repos.d/{fedora,fedora-rawhide}.repo", 0;
|
|
script_run "sed -i -e 's,^metalink,#metalink,g' -e 's,^mirrorlist,#mirrorlist,g' -e 's,^#baseurl.*basearch,baseurl=${location}/Modular/\$basearch,g' -e 's,^#baseurl.*source,baseurl=${location}/Modular/source,g' /etc/yum.repos.d/{fedora-modular,fedora-rawhide-modular}.repo", 0;
|
|
|
|
# this can be used for debugging if something is going wrong
|
|
# unless (script_run 'pushd /etc/yum.repos.d && tar czvf yumreposd.tar.gz * && popd') {
|
|
# upload_logs "/etc/yum.repos.d/yumreposd.tar.gz";
|
|
# }
|
|
}
|
|
|
|
sub _repo_setup_updates {
|
|
# Appropriate repo setup steps for testing a Bodhi update
|
|
# Check if we already ran, bail if so
|
|
return unless script_run "test -f /etc/yum.repos.d/advisory.repo";
|
|
repos_mirrorlist();
|
|
if (get_var("DEVELOPMENT")) {
|
|
# Disable updates-testing so other bad updates don't break us
|
|
# this will do nothing on upgrade tests as we're on a stable
|
|
# release at this point, but it won't *hurt* anything, so no
|
|
# need to except that case really
|
|
assert_script_run "dnf config-manager --set-disabled updates-testing";
|
|
# same for Modular, if appropriate
|
|
unless (script_run 'test -f /etc/yum.repos.d/fedora-updates-modular.repo') {
|
|
assert_script_run "dnf config-manager --set-disabled updates-testing-modular";
|
|
}
|
|
}
|
|
|
|
# Set up an additional repo containing the update or task packages. We do
|
|
# this rather than simply running a one-time update because it may be the
|
|
# case that a package from the update isn't installed *now* but will be
|
|
# installed by one of the tests; by setting up a repo containing the
|
|
# update and enabling it here, we ensure all later 'dnf install' calls
|
|
# will get the packages from the update.
|
|
assert_script_run "mkdir -p /opt/update_repo";
|
|
# if NUMDISKS is above 1, assume we want to put the update repo on
|
|
# the other disk (to avoid huge updates exhausting space on the main
|
|
# disk)
|
|
if (get_var("NUMDISKS") > 1) {
|
|
# I think the disk will always be vdb. This creates a single large
|
|
# partition.
|
|
assert_script_run "echo 'type=83' | sfdisk /dev/vdb";
|
|
assert_script_run "mkfs.ext4 /dev/vdb1";
|
|
assert_script_run "echo '/dev/vdb1 /opt/update_repo ext4 defaults 1 2' >> /etc/fstab";
|
|
assert_script_run "mount /opt/update_repo";
|
|
}
|
|
assert_script_run "cd /opt/update_repo";
|
|
assert_script_run "dnf -y install bodhi-client git createrepo koji", 300;
|
|
|
|
# download the packages
|
|
if (get_var("ADVISORY")) {
|
|
# regular update case
|
|
assert_script_run "bodhi updates download --updateid " . get_var("ADVISORY"), 600;
|
|
}
|
|
else {
|
|
# Koji task case (KOJITASK will be set)
|
|
assert_script_run "koji download-task --arch=" . get_var("ARCH") . " --arch=noarch " . get_var("KOJITASK"), 600;
|
|
}
|
|
# for upgrade tests, we want to do the 'development' changes *after* we
|
|
# set up the update repo. We don't do the f28 fixups as we don't have
|
|
# f28 fedora-repos.
|
|
|
|
# this can be used for debugging if something is going wrong
|
|
# unless (script_run 'pushd /etc/yum.repos.d && tar czvf yumreposd.tar.gz * && popd') {
|
|
# upload_logs "/etc/yum.repos.d/yumreposd.tar.gz";
|
|
# }
|
|
|
|
# log the exact packages in the update at test time, with their
|
|
# source packages and epochs
|
|
assert_script_run 'rpm -qp *.rpm --qf "%{SOURCERPM} %{EPOCH} %{NAME}-%{VERSION}-%{RELEASE}\n" | sort -u > /var/log/updatepkgs.txt';
|
|
upload_logs "/var/log/updatepkgs.txt";
|
|
# also log just the binary package names: this is so we can check
|
|
# later whether any package from the update *should* have been
|
|
# installed, but was not
|
|
assert_script_run 'rpm -qp *.rpm --qf "%{NAME} " > /var/log/updatepkgnames.txt';
|
|
upload_logs "/var/log/updatepkgnames.txt";
|
|
# FIXME: workaround for broken lorax-29.29-1.fc29, remove when
|
|
# FEDORA-2019-8a3aa00d5e goes stable
|
|
my $version = get_var("VERSION");
|
|
if ($version == 29) {
|
|
assert_script_run "bodhi updates download --updateid FEDORA-2019-8a3aa00d5e", 600;
|
|
}
|
|
# create the repo metadata
|
|
assert_script_run "createrepo .";
|
|
# write a repo config file, unless this is the support_server test
|
|
# and it is running on a different release than the update is for
|
|
# (in this case we need the repo to exist but do not want to use
|
|
# it on the actual support_server system)
|
|
unless (get_var("TEST") eq "support_server" && get_var("VERSION") ne get_var("CURRREL")) {
|
|
assert_script_run 'printf "[advisory]\nname=Advisory repo\nbaseurl=file:///opt/update_repo\nenabled=1\nmetadata_expire=3600\ngpgcheck=0" > /etc/yum.repos.d/advisory.repo';
|
|
# run an update now (except for upgrade tests)
|
|
script_run "dnf -y update", 900 unless (get_var("UPGRADE"));
|
|
}
|
|
# mark via a variable that we've set up the update/task repo and done
|
|
# all the logging stuff above
|
|
set_var('_ADVISORY_REPO_DONE', '1');
|
|
}
|
|
|
|
sub repo_setup {
|
|
# Run the appropriate sub-function for the job
|
|
get_var("ADVISORY_OR_TASK") ? _repo_setup_updates : _repo_setup_compose;
|
|
# This repo does not always exist for Rawhide or Branched, and
|
|
# some things (at least realmd) try to update the repodata for
|
|
# it even though it is disabled, and fail. At present none of the
|
|
# tests needs it, so let's just unconditionally nuke it.
|
|
assert_script_run "rm -f /etc/yum.repos.d/fedora-cisco-openh264.repo";
|
|
}
|
|
|
|
sub gnome_initial_setup {
|
|
# Handle gnome-initial-setup, with variations for the pre-login
|
|
# mode (when no user was created during install) and post-login
|
|
# mode (when user was created during install)
|
|
my %args = (
|
|
prelogin => 0,
|
|
timeout => 120,
|
|
@_
|
|
);
|
|
my $version = lc(get_var("VERSION"));
|
|
# the pages we *may* need to click 'next' on. *NOTE*: 'language'
|
|
# is the 'welcome' page, and is in fact never truly skipped; if
|
|
# it's configured to be skipped, it just shows without the language
|
|
# selection widget (so it's a bare 'welcome' page). Current openQA
|
|
# tests never see 'eula' or 'network'. You can find the upstream
|
|
# list in gnome-initial-setup/gnome-initial-setup.c , and the skip
|
|
# config file for Fedora is vendor.conf in the package repo.
|
|
my @nexts = ('language', 'keyboard', 'privacy', 'timezone', 'software');
|
|
# now, we're going to figure out how many of them this test will
|
|
# *actually* see...
|
|
if ($args{prelogin}) {
|
|
# 'language', 'keyboard' and 'timezone' are skipped on F28+ in
|
|
# the 'new user' mode by
|
|
# https://fedoraproject.org//wiki/Changes/ReduceInitialSetupRedundancy
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1474787 ,
|
|
# except 'language' is never *really* skipped (see above)
|
|
@nexts = grep {$_ ne 'keyboard'} @nexts if ($version eq 'rawhide' || $version > 27);
|
|
@nexts = grep {$_ ne 'timezone'} @nexts if ($version eq 'rawhide' || $version > 27);
|
|
}
|
|
else {
|
|
# 'timezone' and 'software' are suppressed for the 'existing user'
|
|
# form of g-i-s
|
|
@nexts = grep {$_ ne 'software'} @nexts;
|
|
@nexts = grep {$_ ne 'timezone'} @nexts;
|
|
}
|
|
# 'additional software sources' screen does not display on F28+:
|
|
# https://bugzilla.gnome.org/show_bug.cgi?id=794825
|
|
@nexts = grep {$_ ne 'software'} @nexts if ($version eq 'rawhide' || $version > 27);
|
|
|
|
assert_screen "next_button", $args{timeout};
|
|
# wait a bit in case of animation
|
|
wait_still_screen 3;
|
|
# GDM 3.24.1 dumps a cursor in the middle of the screen here...
|
|
mouse_hide if ($args{prelogin});
|
|
for my $n (1..scalar(@nexts)) {
|
|
# click 'Next' $nexts times, moving the mouse to avoid
|
|
# highlight problems, sleeping to give it time to get
|
|
# to the next screen between clicks
|
|
mouse_set(100, 100);
|
|
wait_screen_change { assert_and_click "next_button"; };
|
|
# for Japanese, we need to workaround a bug on the keyboard
|
|
# selection screen
|
|
if ($n == 1 && get_var("LANGUAGE") eq 'japanese') {
|
|
if (!check_screen 'initial_setup_kana_kanji_selected', 5) {
|
|
record_soft_failure 'kana kanji not selected: bgo#776189';
|
|
assert_and_click 'initial_setup_kana_kanji';
|
|
}
|
|
}
|
|
}
|
|
# click 'Skip' one time (this is the 'goa' screen)
|
|
mouse_set(100,100);
|
|
wait_screen_change { assert_and_click "skip_button"; };
|
|
send_key "ret";
|
|
if ($args{prelogin}) {
|
|
# create user
|
|
my $user_login = get_var("USER_LOGIN") || "test";
|
|
my $user_password = get_var("USER_PASSWORD") || "weakpassword";
|
|
type_very_safely $user_login;
|
|
wait_screen_change { assert_and_click "next_button"; };
|
|
type_very_safely $user_password;
|
|
send_key "tab";
|
|
type_very_safely $user_password;
|
|
wait_screen_change { assert_and_click "next_button"; };
|
|
send_key "ret";
|
|
}
|
|
else {
|
|
# wait for the stupid 'help' screen to show and kill it
|
|
if (check_screen "getting_started", 30) {
|
|
send_key "alt-f4";
|
|
wait_still_screen 5;
|
|
}
|
|
else {
|
|
record_soft_failure "'getting started' missing (probably BGO#790811)";
|
|
}
|
|
# don't do it again on second load
|
|
}
|
|
set_var("_setup_done", 1);
|
|
}
|
|
|
|
sub _type_user_password {
|
|
# convenience function used by anaconda_create_user, not meant
|
|
# for direct use
|
|
my $user_password = get_var("USER_PASSWORD") || "weakpassword";
|
|
if (get_var("SWITCHED_LAYOUT")) {
|
|
# we double the password, the second time using the native
|
|
# layout, so the password has both ASCII and native characters
|
|
desktop_switch_layout "ascii", "anaconda";
|
|
type_very_safely $user_password;
|
|
desktop_switch_layout "native", "anaconda";
|
|
type_very_safely $user_password;
|
|
}
|
|
else {
|
|
type_very_safely $user_password;
|
|
}
|
|
}
|
|
|
|
sub anaconda_create_user {
|
|
# Create a user, in the anaconda interface. This is here because
|
|
# the same code works both during install and for initial-setup,
|
|
# which runs post-install, so we can share it.
|
|
my %args = (
|
|
timeout => 90,
|
|
@_
|
|
);
|
|
my $user_login = get_var("USER_LOGIN") || "test";
|
|
_assert_and_click("anaconda_install_user_creation", timeout=>$args{timeout});
|
|
assert_screen "anaconda_install_user_creation_screen";
|
|
# wait out animation
|
|
wait_still_screen 2;
|
|
type_very_safely $user_login;
|
|
type_very_safely "\t\t\t\t";
|
|
_type_user_password();
|
|
wait_screen_change { send_key "tab"; };
|
|
wait_still_screen 2;
|
|
_type_user_password();
|
|
# even with all our slow typing this still *sometimes* seems to
|
|
# miss a character, so let's try again if we have a warning bar.
|
|
# But not if we're installing with a switched layout, as those
|
|
# will *always* result in a warning bar at this point (see below)
|
|
if (!get_var("SWITCHED_LAYOUT") && check_screen "anaconda_warning_bar", 3) {
|
|
wait_screen_change { send_key "shift-tab"; };
|
|
wait_still_screen 2;
|
|
_type_user_password();
|
|
wait_screen_change { send_key "tab"; };
|
|
wait_still_screen 2;
|
|
_type_user_password();
|
|
}
|
|
assert_and_click "anaconda_install_user_creation_make_admin";
|
|
assert_and_click "anaconda_spoke_done";
|
|
# since 20170105, we will get a warning here when the password
|
|
# contains non-ASCII characters. Assume only switched layouts
|
|
# produce non-ASCII characters, though this isn't strictly true
|
|
if (get_var('SWITCHED_LAYOUT') && check_screen "anaconda_warning_bar", 3) {
|
|
wait_still_screen 1;
|
|
assert_and_click "anaconda_spoke_done";
|
|
}
|
|
}
|
|
|
|
sub check_desktop_clean {
|
|
# Check we're at a 'clean' desktop. This used to be a simple
|
|
# needle check, but Rawhide's default desktop is now one which
|
|
# changes over time, and the GNOME top bar is now translucent
|
|
# by default; together these changes mean it's impossible to
|
|
# make a reliable needle, so we need something more tricksy to
|
|
# cover that case. 'tries' is the amount of check cycles to run
|
|
# before giving up and failing; each cycle should take ~3 secs.
|
|
my %args = (
|
|
tries => 10,
|
|
@_
|
|
);
|
|
foreach my $i (1..$args{tries}) {
|
|
# we still *do* the needle check, for all cases it covers
|
|
return if (check_screen "graphical_desktop_clean", 1);
|
|
# now do the special GNOME case
|
|
if (get_var("DESKTOP") eq "gnome") {
|
|
send_key "super";
|
|
if (check_screen "overview_app_grid", 2) {
|
|
send_key "super";
|
|
wait_still_screen 3;
|
|
# go back to the desktop, if we're still at the app
|
|
# grid (can be a bit fuzzy depending on response lag)
|
|
while (check_screen "overview_app_grid", 1) {
|
|
send_key "super";
|
|
wait_still_screen 3;
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
else {
|
|
# to keep the timing equal
|
|
sleep 2;
|
|
}
|
|
}
|
|
die "Clean desktop not reached!";
|
|
}
|
|
|
|
sub download_modularity_tests {
|
|
# Download the modularity test script, place in the system and then
|
|
# modify the access rights to make it executable.
|
|
my ($whitelist) = @_;
|
|
# we need python3-yaml for the script to run
|
|
assert_script_run 'dnf -y install python3-yaml', 180;
|
|
assert_script_run 'curl -o /root/test.py https://pagure.io/fedora-qa/modularity_testing_scripts/raw/master/f/modular_functions.py';
|
|
if ($whitelist eq 'whitelist') {
|
|
assert_script_run 'curl -o /root/whitelist https://pagure.io/fedora-qa/modularity_testing_scripts/raw/master/f/whitelist';
|
|
}
|
|
assert_script_run 'chmod 755 /root/test.py';
|
|
}
|
|
|
|
sub quit_firefox {
|
|
# Quit Firefox, handling the 'close multiple tabs' warning screen if
|
|
# it shows up
|
|
send_key "ctrl-q";
|
|
# expect to get to either the tabs warning or a console
|
|
if (check_screen ["user_console", "root_console", "firefox_close_tabs"], 30) {
|
|
# if we hit the tabs warning, click it
|
|
assert_and_click "firefox_close_tabs" if (match_has_tag "firefox_close_tabs");
|
|
}
|
|
# FIXME workaround for RHBZ #1663050 - with systemd 240, at this
|
|
# point the tty quits and we wind up back at the login prompt
|
|
wait_still_screen 5;
|
|
# on all paths where we hit this sub, we want to be logged in as
|
|
# root, so let's just run through console_login again. This is
|
|
# fine for older releases which don't have the bug, console_login
|
|
# will just notice we're already logged in as root and return.
|
|
# Timeout is set to 30 as sometimes it seems to take a while to
|
|
# get back to a console, e.g.
|
|
# https://openqa.fedoraproject.org/tests/437570
|
|
console_login(user=>'root', timeout=>30);
|
|
}
|
|
|
|
sub start_with_launcher {
|
|
# Get the name of the needle with a launcher, find the launcher in the menu
|
|
# and click on it to start the application. This function works for the
|
|
# Gnome desktop.
|
|
|
|
# $launcher holds the launcher needle, but some of the apps are hidden in a submenu
|
|
# so this must be handled first to find the launcher needle.
|
|
|
|
my ($launcher,$submenu,$group) = @_;
|
|
$submenu //= '';
|
|
$group //= '';
|
|
my $desktop = get_var('DESKTOP');
|
|
|
|
my $item_to_check = $submenu || $launcher;
|
|
# The following varies for different desktops.
|
|
if ($desktop eq 'gnome') {
|
|
# Start the Activities page
|
|
send_key 'alt-f1';
|
|
wait_still_screen 5;
|
|
|
|
# Click on the menu icon to come into the menus
|
|
assert_and_click 'overview_app_grid';
|
|
wait_still_screen 5;
|
|
|
|
# Find the application launcher in the current menu page.
|
|
# If it cannot be found there, hit PageDown to go to another page.
|
|
|
|
send_key_until_needlematch($item_to_check, 'pgdn', 5, 3);
|
|
|
|
# If there was a submenu, click on that first.
|
|
if ($submenu) {
|
|
assert_and_click $submenu;
|
|
wait_still_screen 5;
|
|
}
|
|
# Click on the launcher
|
|
assert_and_click $launcher;
|
|
wait_still_screen 5;
|
|
}
|
|
elsif ($desktop eq 'kde'){
|
|
# Click on the KDE launcher icon
|
|
assert_and_click 'kde_menu_launcher';
|
|
wait_still_screen 2;
|
|
|
|
# Select the appropriate submenu
|
|
assert_and_click $submenu;
|
|
wait_still_screen 2;
|
|
|
|
# Select the appropriate menu subgroup where real launchers
|
|
# are placed, but only if requested
|
|
if ($group) {
|
|
send_key_until_needlematch($group, 'down', 20, 3);
|
|
send_key 'ret';
|
|
#assert_and_click $group;
|
|
wait_still_screen 2;
|
|
}
|
|
|
|
# Find and click on the menu item to start the application
|
|
send_key_until_needlematch($launcher, 'down', 40, 3);
|
|
send_key 'ret';
|
|
wait_still_screen 5;
|
|
}
|
|
}
|
|
|
|
|
|
sub quit_with_shortcut {
|
|
# Quit the application using the Alt-F4 keyboard shortcut
|
|
send_key 'alt-f4';
|
|
wait_still_screen 5;
|
|
assert_screen 'workspace';
|
|
|
|
}
|
|
|
|
sub lo_dismiss_tip {
|
|
# identify and close a 'tip of the day' window that shows on start
|
|
# of all LibreOffice apps. For the 'app startup' tests.
|
|
assert_screen ["libreoffice_tip", "libreoffice_any"];
|
|
# we use check_screen here just in case both needles match and
|
|
# libreoffice_any 'won'
|
|
send_key 'esc' if (check_screen "libreoffice_tip", 2);
|
|
}
|
|
|
|
sub advisory_get_installed_packages {
|
|
# For update tests (this only works if we've been through
|
|
# _repo_setup_updates), figure out which packages from the update
|
|
# are currently installed. This is here so we can do it both in
|
|
# _advisory_post and post_fail_hook.
|
|
return unless (get_var("_ADVISORY_REPO_DONE"));
|
|
assert_script_run 'rpm -qa --qf "%{SOURCERPM} %{EPOCH} %{NAME}-%{VERSION}-%{RELEASE}\n" | sort -u > /tmp/allpkgs.txt';
|
|
# this finds lines which appear in both files
|
|
# http://www.unix.com/unix-for-dummies-questions-and-answers/34549-find-matching-lines-between-2-files.html
|
|
if (script_run 'comm -12 /tmp/allpkgs.txt /var/log/updatepkgs.txt > /var/log/testedpkgs.txt') {
|
|
# occasionally, for some reason, it's unhappy about sorting;
|
|
# we shouldn't fail the test in this case, just upload the
|
|
# files so we can see why...
|
|
upload_logs "/tmp/allpkgs.txt", failok=>1;
|
|
upload_logs "/var/log/updatepkgs.txt", failok=>1;
|
|
}
|
|
# we'll try and upload the output even if comm 'failed', as it
|
|
# does in fact still write it in some cases
|
|
upload_logs "/var/log/testedpkgs.txt", failok=>1;
|
|
}
|
|
|
|
sub advisory_check_nonmatching_packages {
|
|
# For update tests (this only works if we've been through
|
|
# _repo_setup_updates), figure out if we have a different version
|
|
# of any package from the update installed - this indicates a
|
|
# problem, it likely means a dep issue meant dnf installed an
|
|
# older version from the frozen release repo
|
|
my %args = (
|
|
fatal => 1,
|
|
@_
|
|
);
|
|
return unless (get_var("_ADVISORY_REPO_DONE"));
|
|
# if this fails in advisory_post, we don't want to do it *again*
|
|
# unnecessarily in post_fail_hook
|
|
return if (get_var("_ACNMP_DONE"));
|
|
script_run 'touch /tmp/installedupdatepkgs.txt';
|
|
# this creates /tmp/installedupdatepkgs.txt as a sorted list of installed
|
|
# packages with the same name as packages from the update, in the same form
|
|
# as /var/log/updatepkgs.txt. The 'tail -1' tries to handle the problem of
|
|
# installonly packages like the kernel, where we wind up with *multiple*
|
|
# versions installed after the update; I'm hoping the last line of output
|
|
# for any given package is the most recent version, i.e. the one in the
|
|
# update.
|
|
script_run 'for pkg in $(cat /var/log/updatepkgnames.txt); do rpm -q $pkg && rpm -q $pkg --qf "%{SOURCERPM} %{EPOCH} %{NAME}-%{VERSION}-%{RELEASE}\n" | tail -1 >> /tmp/installedupdatepkgs.txt; done';
|
|
script_run 'sort -u -o /tmp/installedupdatepkgs.txt /tmp/installedupdatepkgs.txt';
|
|
# if any line appears in installedupdatepkgs.txt but not updatepkgs.txt,
|
|
# we have a problem.
|
|
if (script_run 'comm -23 /tmp/installedupdatepkgs.txt /var/log/updatepkgs.txt > /var/log/installednotupdatedpkgs.txt') {
|
|
# occasionally, for some reason, it's unhappy about sorting;
|
|
# we shouldn't fail the test in this case, just upload the
|
|
# files so we can see why...
|
|
upload_logs "/tmp/installedupdatepkgs.txt", failok=>1;
|
|
upload_logs "/var/log/updatepkgs.txt", failok=>1;
|
|
}
|
|
# this exits 1 if the file is zero-length, 0 if it's longer
|
|
# if it's 0, that's *BAD*: we want to upload the file and fail
|
|
unless (script_run 'test -s /var/log/installednotupdatedpkgs.txt') {
|
|
upload_logs "/var/log/installednotupdatedpkgs.txt", failok=>1;
|
|
upload_logs "/var/log/updatepkgs.txt", failok=>1;
|
|
my $message = "Package(s) from update not installed when it should have been! See installednotupdatedpkgs.txt";
|
|
if ($args{fatal}) {
|
|
set_var("_ACNMP_DONE", "1");
|
|
die $message;
|
|
}
|
|
else {
|
|
# if we're already in post_fail_hook, we don't want to die again
|
|
record_info $message;
|
|
}
|
|
}
|
|
}
|
|
|
|
sub select_rescue_mode {
|
|
# handle bootloader screen
|
|
assert_screen "bootloader", 30;
|
|
if (get_var('OFW')) {
|
|
# select "rescue system" directly
|
|
send_key "down";
|
|
send_key "down";
|
|
send_key "ret";
|
|
}
|
|
else {
|
|
# select troubleshooting
|
|
send_key "down";
|
|
send_key "ret";
|
|
# select "rescue system"
|
|
if (get_var('UEFI')) {
|
|
send_key "down";
|
|
# we need this on aarch64 till #1661288 is resolved
|
|
if (get_var('ARCH') eq 'aarch64') {
|
|
send_key "e";
|
|
# duped with do_bootloader, sadly...
|
|
for (1 .. 50) {
|
|
send_key 'down';
|
|
}
|
|
sleep 1;
|
|
send_key 'up';
|
|
sleep 1;
|
|
send_key 'up';
|
|
send_key "end";
|
|
type_safely " console=tty0";
|
|
send_key "ctrl-x";
|
|
}
|
|
else {
|
|
send_key "ret";
|
|
}
|
|
}
|
|
else {
|
|
type_string "r\n";
|
|
}
|
|
}
|
|
|
|
assert_screen "rescue_select", 120; # it takes time to start anaconda
|
|
}
|
|
|
|
sub copy_devcdrom_as_isofile {
|
|
# copy /dev/cdrom as iso file and verify checksum is same
|
|
# as cdrom previously retrieved from ISO_URL
|
|
my $isoname = shift;
|
|
assert_script_run "dd if=/dev/cdrom of=$isoname", 360;
|
|
# verify iso checksum
|
|
my $cdurl = get_var('ISO_URL');
|
|
# ISO_URL may not be set if we POSTed manually or something; just assume
|
|
# we're OK in that case
|
|
return unless $cdurl;
|
|
my $cmd = <<EOF;
|
|
urld="$cdurl"; urld=\${urld%/*}; chkf=\$(curl -fs \$urld/ |grep CHECKSUM | sed -E 's/.*href=.//; s/\".*//') && curl -f \$urld/\$chkf -o /tmp/x
|
|
chkref=\$(grep -E 'SHA256.*dvd' /tmp/x | sed -e 's/.*= //') && echo "\$chkref $isoname" >/tmp/x
|
|
sha256sum -c /tmp/x
|
|
EOF
|
|
assert_script_run($_) foreach (split /\n/, $cmd);
|
|
}
|
|
|
|
sub bypass_1691487 {
|
|
if (script_run 'echo "expected command supposed to be typed without error."') {
|
|
record_soft_failure 'brc#1691487 bypass';
|
|
script_run 'echo "trial bypass dup chars brc#1691487"';
|
|
}
|
|
}
|
|
|
|
sub get_release_number {
|
|
# return the release number; so usually VERSION, but for Rawhide,
|
|
# we return RAWREL. This allows us to avoid constantly doing stuff
|
|
# like `if ($version eq "Rawhide" || $version > 30)`.
|
|
my $version = get_var("VERSION");
|
|
my $rawrel = get_var("RAWREL", "Rawhide");
|
|
return $rawrel if ($version eq "Rawhide");
|
|
return $version
|
|
}
|
|
|
|
sub tell_source {
|
|
# This helper function identifies the Subvariant of the tested system.
|
|
# For the purposes of identification testing, we are only interested
|
|
# if the system is Workstation, Server, or something else, because,
|
|
# except Workstation and Server, there are no graphical differences
|
|
# between various spins and isos.
|
|
my $iso = get_var('SUBVARIANT');
|
|
if ($iso eq 'Workstation' or $iso eq 'Server') {
|
|
$iso = lc($iso);
|
|
}
|
|
elsif ($iso eq 'AtomicHost') {
|
|
$iso = 'atomic';
|
|
}
|
|
elsif ($iso eq 'Silverblue') {
|
|
$iso = 'workstation';
|
|
}
|
|
else {
|
|
$iso = 'generic';
|
|
}
|
|
return $iso;
|
|
}
|
|
|
|
sub check_left_bar {
|
|
# This method is used by identification tests to check whether the Anaconda
|
|
# bar on the left side of the screen corresponds with the correct version.
|
|
# It looks different for Server, Workstation and others.
|
|
my $source = tell_source;
|
|
assert_screen "leftbar_${source}";
|
|
}
|
|
|
|
sub check_top_bar {
|
|
# This method is used by identification tests to check whether the
|
|
# top bar in Anaconda corresponds with the correct version of the spin.
|
|
my $source = tell_source;
|
|
assert_screen "topbar_${source}";
|
|
}
|
|
|
|
sub check_prerelease {
|
|
# This method is used by identification tests to check if
|
|
# Anaconda shows the PRERELEASE info for Rawhide versions.
|
|
# As it seems, the rules for showing the PRERELEASE are not
|
|
# as simple as it may look like. It seems to me, that the PRERELEASE
|
|
# is shown on Rawhide intallations, which is pretty easy to test because
|
|
# the "VERSION" variable is Rawhide. On Final RC, the PRERELEASE should
|
|
# be turned off, while it should be present between before that.
|
|
# When Fedora is branched, the "VERSION" changes to the version number
|
|
# and this is not changed even with Final, so we cannot test that.
|
|
# Investigating the history, I noticed that all nightly builds have
|
|
# that prerelease turned on. And also, it is there on a Beta candidate.
|
|
# We can test for that. For update tests, if DEVELOPMENT is set the
|
|
# prerelease tags should appear, otherwise they should not.
|
|
|
|
my $beta = get_var('ISO');
|
|
my $nightly = get_var('BUILD');
|
|
my $version = get_var('VERSION');
|
|
my $development = get_var('DEVELOPMENT');
|
|
# Let us see if the installed system is one that needs to have the prerelease
|
|
# note shown, default is NO.
|
|
my $prerelease = 0;
|
|
if ($beta =~ /Beta/ or $version eq "Rawhide" or $development) {
|
|
$prerelease = 1;
|
|
}
|
|
# If the image is a nightly build or test build, it is not clear whether
|
|
# the prerelease should be there or not, but according to what we decided
|
|
# this is not a big issue. This piece of code can be used later, when
|
|
# we decide differently.
|
|
elsif ($nightly =~ /\.[nt]\.\d+/) {
|
|
$prerelease = 10;
|
|
}
|
|
# For all prerelease requiring ISOs, assert that prerelease is there.
|
|
if ($prerelease == 1) {
|
|
assert_screen "prerelease_note";
|
|
}
|
|
elsif ($prerelease == 0) {
|
|
# If the prerelease note is shown, where it should not be, die!
|
|
if (check_screen "prerelease_note") {
|
|
die "The PRERELEASE tag is shown, but it should NOT be.";
|
|
}
|
|
}
|
|
}
|
|
|
|
sub _assert_and_click {
|
|
# this is a wrapper around assert_and_click which handles this:
|
|
# https://github.com/os-autoinst/os-autoinst/pull/1075/files
|
|
# it changed the signature without any backward compatibility, so
|
|
# earlier os-autoinsts require an *array* of args, but later ones
|
|
# require a *hash* of args. This works with both.
|
|
my $version = $OpenQA::Isotovideo::Interface::version;
|
|
my ($mustmatch, %args) = @_;
|
|
if ($version > 13) {
|
|
return assert_and_click($mustmatch, %args);
|
|
}
|
|
else {
|
|
$args{timeout} //= $bmwqemu::default_timeout;
|
|
$args{button} //= 'left';
|
|
$args{dclick} //= 0;
|
|
$args{mousehide} //= 0;
|
|
return assert_and_click($mustmatch, $args{button}, $args{timeout}, 0, $args{dclick});
|
|
}
|
|
}
|
|
|
|
sub check_version {
|
|
# This function checks if the correct version is display during installation
|
|
# in Anaconda, i.e. nonlive media showing Rawhide when Rawhide and version numbers
|
|
# when not Rawhide, while live media always showing version numbers.
|
|
|
|
my $version = lc(get_var('VERSION'));
|
|
if ($version eq 'rawhide' && get_var('LIVE')) {
|
|
$version = get_var('RAWREL');
|
|
}
|
|
assert_screen "version_${version}_ident";
|
|
}
|
|
|
|
sub spell_version_number {
|
|
my $version = shift;
|
|
# spelt version of Rawhide is...Rawhide
|
|
return "Rawhide" if ($version eq 'Rawhide');
|
|
my %ones = (
|
|
"0" => "Zero",
|
|
"1" => "One",
|
|
"2" => "Two",
|
|
"3" => "Three",
|
|
"4" => "Four",
|
|
"5" => "Five",
|
|
"6" => "Six",
|
|
"7" => "Seven",
|
|
"8" => "Eight",
|
|
"9" => "Nine",
|
|
);
|
|
my %tens = (
|
|
"2" => "Twenty",
|
|
"3" => "Thirty",
|
|
"4" => "Fourty",
|
|
"5" => "Fifty",
|
|
"6" => "Sixty",
|
|
"7" => "Seventy",
|
|
"8" => "Eighty",
|
|
"9" => "Ninety",
|
|
);
|
|
|
|
my $ten = substr($version, 0, 1);
|
|
my $one = substr($version, 1, 1);
|
|
my $speltnum = "";
|
|
if ($one eq "0") {
|
|
$speltnum = "$tens{$ten}";
|
|
}
|
|
else {
|
|
$speltnum = "$tens{$ten} $ones{$one}";
|
|
}
|
|
return $speltnum;
|
|
}
|
|
|
|
sub rec_log {
|
|
my ($line, $condition, $failref, $filename) = @_;
|
|
$filename ||= '/tmp/os-release.log';
|
|
if ($condition) {
|
|
$line = "${line} - SUCCEEDED\n";
|
|
}
|
|
else {
|
|
push @$failref, $line;
|
|
$line = "${line} - FAILED\n";
|
|
}
|
|
script_run "echo \"$line\" >> $filename";
|
|
|
|
}
|
|
|
|
sub click_unwanted_notifications {
|
|
# there are a few KDE tests where at some point we want to click
|
|
# on all visible 'update available' notifications (there can be
|
|
# more than one, thanks to
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1730482 ) and the
|
|
# buggy 'akonadi_migration_agent' notification if it's showing -
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1716005
|
|
# Returns an array indicating which notifications it closed
|
|
wait_still_screen 5;
|
|
my $count = 10;
|
|
my @closed;
|
|
while ($count > 0 && check_screen "desktop_update_notification_popup", 5) {
|
|
$count -= 1;
|
|
push (@closed, 'update');
|
|
assert_and_click "desktop_update_notification_popup";
|
|
}
|
|
if (check_screen "akonadi_migration_agent", 5) {
|
|
assert_and_click "akonadi_migration_agent";
|
|
push (@closed, 'akonadi');
|
|
}
|
|
return @closed;
|
|
}
|