os-autoinst-distri-rocky/lib/anaconda.pm

310 lines
12 KiB
Perl
Raw Normal View History

package anaconda;
use strict;
use base 'Exporter';
use Exporter;
use testapi;
use utils;
our @EXPORT = qw/select_disks custom_scheme_select custom_blivet_add_partition custom_blivet_format_partition custom_blivet_resize_partition custom_change_type custom_change_fs custom_change_device custom_delete_part get_full_repo get_mirrorlist_url/;
sub select_disks {
# Handles disk selection. Has one optional argument - number of
# disks to select. Should be run when main Anaconda hub is
# displayed. Enters disk selection spoke and then ensures that
# required number of disks are selected. Additionally, if
# PARTITIONING variable starts with custom_, selects "custom
# partitioning" checkbox. Example usage:
# after calling `select_disks(2);` from Anaconda main hub,
# installation destination spoke will be displayed and two
# attached disks will be selected for installation.
my %args = (
disks => 1,
iscsi => {},
@_
);
my %iscsi = %{$args{iscsi}};
# Anaconda hub
assert_screen "anaconda_main_hub", 300; #
# Damn animation delay can cause bad clicks here too - wait for it
sleep 1;
assert_and_click "anaconda_main_hub_install_destination";
if (get_var('NUMDISKS') > 1) {
# Multi-disk case. Select however many disks the test needs. If
# $disks is 0, this will do nothing, and 0 disks will be selected.
for my $n (1 .. $args{disks}) {
assert_and_click "anaconda_install_destination_select_disk_$n";
}
}
else {
# Single disk case.
if ($args{disks} == 0) {
# Clicking will *de*-select.
assert_and_click "anaconda_install_destination_select_disk_1";
}
elsif ($args{disks} > 1) {
die "Only one disk is connected! Cannot select $args{disks} disks.";
}
# For exactly 1 disk, we don't need to do anything.
}
# Handle network disks.
if (%iscsi) {
assert_and_click "anaconda_install_destination_add_network_disk";
foreach my $target (keys %iscsi) {
my $ip = $iscsi{$target}->[0];
my $user = $iscsi{$target}->[1];
my $password = $iscsi{$target}->[2];
assert_and_click "anaconda_install_destination_add_iscsi_target";
wait_still_screen 2;
type_safely $ip;
wait_screen_change { send_key "tab"; };
type_safely $target;
# start discovery - three tabs, enter
type_safely "\t\t\t\n";
if ($user && $password) {
assert_and_click "anaconda_install_destination_target_auth_type";
assert_and_click "anaconda_install_destination_target_auth_type_chap";
send_key "tab";
type_safely $user;
send_key "tab";
type_safely $password;
}
assert_and_click "anaconda_install_destination_target_login";
assert_and_click "anaconda_install_destination_select_target";
}
assert_and_click "anaconda_spoke_done";
}
# If this is a custom partitioning test, select custom partitioning. For testing blivet-gui,
# name of test module should start with custom_blivet_, otherwise it should start with custom_.
if (get_var('PARTITIONING') =~ /^custom_blivet_/) {
assert_and_click "anaconda_manual_blivet_partitioning";
} elsif (get_var('PARTITIONING') =~ /^custom_/) {
assert_and_click "anaconda_manual_partitioning";
}
}
sub custom_scheme_select {
# Used for setting custom partitioning scheme (such as LVM).
# Should be called when custom partitioning spoke is displayed.
# Pass the name of the partitioning scheme. Needle
# `anaconda_part_scheme_$scheme` should exist. Example usage:
# `custom_scheme_select("btrfs");` uses needle
# `anaconda_part_scheme_btrfs` to set partition scheme to Btrfs.
my ($scheme) = @_;
assert_and_click "anaconda_part_scheme";
# Move the mouse away from the menu
mouse_set(10, 10);
# workaround for bug aarch64 tests sometimes hit - menu doesn't
# open when clicked. just click it again.
if (check_screen "anaconda_part_scheme_active", 5) {
assert_and_click "anaconda_part_scheme_active";
mouse_set(10, 10);
}
assert_and_click "anaconda_part_scheme_$scheme";
}
sub custom_blivet_add_partition {
# Used to add partition on blivet-gui partitioning screen
# in Anaconda. Should be called when blivet-gui is displayed and free space is selected.
# You can pass device type for partition (needle tagged anaconda_blivet_devicetype_$devicetype should exist),
# whether partitions should be of RAID1 (devicetype is then automatically handled) - you then
# need to have two disks added, size of that partition in MiBs, desired filesystem of that partition
# (anaconda_blivet_part_fs_$filesystem should exist) and mountpoint of that partition (e. g. string "/boot").
my %args = (
devicetype => "",
raid1 => 0,
size => 0,
filesystem => "",
mountpoint => "",
@_
);
$args{devicetype} = "raid" if $args{raid1};
assert_and_click "anaconda_blivet_part_add";
mouse_set(10, 10);
if ($args{devicetype}) {
assert_and_click "anaconda_blivet_part_devicetype";
mouse_set(10, 10);
assert_and_click "anaconda_blivet_part_devicetype_$args{devicetype}";
}
if ($args{raid1}) {
# for RAID1, two disks should be selected
send_key "tab";
send_key "down";
send_key "spc";
assert_screen "anaconda_blivet_vdb_selected";
assert_and_click "anaconda_blivet_raidlevel_select";
mouse_set(10, 10);
assert_and_click "anaconda_blivet_raidlevel_raid1";
}
if ($args{size}) {
assert_and_click "anaconda_blivet_size_unit";
assert_and_click "anaconda_blivet_size_unit_mib";
send_key "shift-tab"; # input is one tab back from unit selection listbox
# size input can contain whole set of different values, so we can't match it with needle
type_safely $args{size} . "\n";
}
# if no filesystem was specified or filesystem is already selected, do nothing
if ($args{filesystem} && !check_screen("anaconda_blivet_part_fs_$args{filesystem}_selected", 5)) {
assert_and_click "anaconda_blivet_part_fs";
# Move the mouse away from the menu
mouse_set(10, 10);
assert_and_click "anaconda_blivet_part_fs_$args{filesystem}";
}
if ($args{mountpoint}) {
assert_and_click "anaconda_blivet_mountpoint";
type_safely $args{mountpoint} . "\n";
}
# seems we can get a lost click here if we click too soon
wait_still_screen 3;
assert_and_click "anaconda_blivet_btn_ok";
# select "free space" in blivet-gui if it exists, so we could run this function again to add another partition
if (check_screen("anaconda_blivet_free_space", 15)) {
assert_and_click "anaconda_blivet_free_space";
}
}
sub custom_blivet_format_partition {
# This subroutine formats a selected partition. To use it, you must select the
# partition by other means before you format it using this routine.
# You have to create a needle for any non-existing filesystem that is
2020-05-28 09:40:34 +00:00
# passed via the $type, such as anaconda_blivet_part_fs_ext4.
my %args = @_;
# Start editing the partition and select the Format option
assert_and_click "anaconda_blivet_part_edit";
assert_and_click "anaconda_blivet_part_format";
# Select the appropriate filesystem type.
assert_and_click "anaconda_blivet_part_drop_select";
2020-05-27 09:16:42 +00:00
assert_and_click "anaconda_blivet_part_fs_$args{type}";
wait_still_screen 2;
# Fill in the label if needed.
send_key "tab";
if ($args{label}) {
type_very_safely $args{label};
}
# Fill in the mountpoint.
send_key "tab";
type_very_safely $args{mountpoint};
assert_and_click "anaconda_blivet_part_format_button";
}
sub custom_blivet_resize_partition {
# This subroutine resizes the selected (active) partition to a given value. Note, that
# if the selected value is bigger than the available space, it will only be
# resized to fill up the available space no matter the number.
# This routine cannot will not be able to select a particular partition!!!
my %args = @_;
# Start editing the partition and select the Resize option
assert_and_click "anaconda_blivet_part_edit";
assert_and_click "anaconda_blivet_part_resize";
# Select the appropriate units. Note, that there must a be needle existing
# for each possible unit that you might want to use, such as
# "anaconda_blivet_size_unit_gib".
assert_and_click "anaconda_blivet_part_drop_select";
assert_and_click "anaconda_blivet_size_unit_$args{units}";
# Move back to the value field.
send_key "shift-tab";
# Type in the new size.
type_very_safely $args{size};
assert_and_click "anaconda_blivet_part_resize_button";
}
sub custom_change_type {
# Used to set different device types for specified partition (e.g.
# RAID). Should be called when custom partitioning spoke is
# displayed. Pass it type of partition and name of partition.
# Needles `anaconda_part_select_$part` and
# `anaconda_part_device_type_$type` should exist. Example usage:
# `custom_change_type("raid", "root");` uses
# `anaconda_part_select_root` and `anaconda_part_device_type_raid`
# needles to set RAID for root partition.
my ($type, $part) = @_;
$part ||= "root";
assert_and_click "anaconda_part_select_$part";
assert_and_click "anaconda_part_device_type";
# Move the mouse away from the menu
mouse_set(10, 10);
assert_and_click "anaconda_part_device_type_$type";
assert_and_click "anaconda_part_update_settings";
wait_still_screen 5;
}
sub custom_change_fs {
# Used to set different file systems for specified partition.
# Should be called when custom partitioning spoke is displayed.
# Pass filesystem name and name of partition. Needles
# `anaconda_part_select_$part` and `anaconda_part_fs_$fs` should
# exist. Example usage:
# `custom_change_fs("ext3", "root");` uses
# `anaconda_part_select_root` and `anaconda_part_fs_ext3` needles
# to set ext3 file system for root partition.
my ($fs, $part) = @_;
$part ||= "root";
assert_and_click "anaconda_part_select_$part";
wait_still_screen 5;
# if fs is already set correctly, do nothing
return if (check_screen "anaconda_part_fs_${fs}_selected", 5);
assert_and_click "anaconda_part_fs";
# Move the mouse away from the menu
mouse_set(10, 10);
assert_and_click "anaconda_part_fs_$fs";
assert_and_click "anaconda_part_update_settings";
wait_still_screen 5;
}
sub custom_change_device {
my ($part, $devices) = @_;
assert_and_click "anaconda_part_select_$part";
assert_and_click "anaconda_part_device_modify";
foreach my $device (split(/ /, $devices)) {
assert_and_click "anaconda_part_device_${device}";
}
assert_and_click "anaconda_part_device_select";
assert_and_click "anaconda_part_update_settings";
wait_still_screen 5;
}
sub custom_delete_part {
# Used for deletion of previously added partitions in custom
# partitioning spoke. Should be called when custom partitioning
# spoke is displayed. Pass the partition name. Needle
# `anaconda_part_select_$part` should exist. Example usage:
# `custom_delete_part('swap');` uses needle
# `anaconda_part_select_swap` to delete previously added swap
# partition.
my ($part) = @_;
return if not $part;
assert_and_click "anaconda_part_select_$part";
assert_and_click "anaconda_part_delete";
}
sub get_full_repo {
my ($repourl) = @_;
# trivial thing we kept repeating: fill out an HTTP or HTTPS
# repo URL with flavor and arch, leave hd & NFS ones alone
# (as for those tests we just use a mounted ISO and URL is complete)
if ($repourl !~ m/^(nfs|hd:)/) {
# Everything variant doesn't exist for modular composes atm,
# only Server
my $variant = 'Everything';
$variant = 'Server' if (get_var("MODULAR"));
$repourl .= "/${variant}/".get_var("ARCH")."/os";
}
return $repourl;
}
sub get_mirrorlist_url {
return "mirrors.fedoraproject.org/mirrorlist?repo=fedora-" . lc(get_var("VERSION")) . "&arch=" . get_var('ARCH');
}