os-autoinst-distri-rocky/tests/_support_server_postinstall.pm

77 lines
2.8 KiB
Perl
Raw Normal View History

use base "installedtest";
use strict;
use testapi;
use lockapi;
use mmapi;
sub run {
my $self=shift;
# clone host's /etc/hosts (for phx2 internal routing to work)
# must come *before* setup_tap_static or else it would overwrite
# its changes
$self->clone_host_file("/etc/hosts");
# set up networking
$self->setup_tap_static("10.0.2.110", "support.domain.local");
$self->clone_host_file("/etc/resolv.conf");
add NFS tests (and DHCP/DNS in the support server) Summary: Set up the support server to provide DHCP/DNS functionality and an NFS server, providing a kickstart. Add a kickstart test just like the other root-user-crypted-net kickstart tests except it gets the kickstart from the support server via NFS. Also add NFS repository tests and a second support server for Server-dvd-iso flavor: this test must run on that flavor to ensure that packages are actually available. The support server just mounts the attached 'DVD' and exports it via NFS. Note we don't need to do anything clever to avoid IP conflicts between the two support servers, because os-autoinst-openvswitch ensures each worker group is on its own VLAN. As part of adding the NFS repo tests, I did a bit of cleanup, moving little things we were repeating a lot into anacondatest, and sharing the 'check if the repo was used' logic between all the tests (by making it into a test step that's loaded for all of them). I also simplified the 'was repo used' checks a bit, it seems silly to run a 'grep' command inside the VM then have os-autoinst do a grep on the output (which is effectively what we were doing before), instead we'll just use a single grep within the VM, and clean up the messy quoting/escaping a bit. Test Plan: Run all tests - at least all repository tests - and check they work (make sure the tests are actually still sane, not just that they pass). I've done runs of all the repo tests and they look good to me, but please double-check. I'm currently re-running the whole 24-20160609.n.0 test on staging with these changes. Reviewers: jskladan, garretraziel Reviewed By: garretraziel Subscribers: tflink Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
2016-06-13 15:42:30 +00:00
## DNS / DHCP (dnsmasq)
# create config
assert_script_run "printf 'domain=domain.local\ndhcp-range=10.0.2.112,10.0.2.199\ndhcp-option=option:router,10.0.2.2' > /etc/dnsmasq.conf";
# open firewall ports
assert_script_run "firewall-cmd --add-service=dhcp";
assert_script_run "firewall-cmd --add-service=dns";
# start server
assert_script_run "systemctl restart dnsmasq.service";
assert_script_run "systemctl is-active dnsmasq.service";
## ISCSI
# start up iscsi target
assert_script_run "printf '<target iqn.2016-06.local.domain:support.target1>\n backing-store /dev/vdb\n</target>' > /etc/tgt/conf.d/openqa.conf";
# open firewall port
assert_script_run "firewall-cmd --add-service=iscsi-target";
add NFS tests (and DHCP/DNS in the support server) Summary: Set up the support server to provide DHCP/DNS functionality and an NFS server, providing a kickstart. Add a kickstart test just like the other root-user-crypted-net kickstart tests except it gets the kickstart from the support server via NFS. Also add NFS repository tests and a second support server for Server-dvd-iso flavor: this test must run on that flavor to ensure that packages are actually available. The support server just mounts the attached 'DVD' and exports it via NFS. Note we don't need to do anything clever to avoid IP conflicts between the two support servers, because os-autoinst-openvswitch ensures each worker group is on its own VLAN. As part of adding the NFS repo tests, I did a bit of cleanup, moving little things we were repeating a lot into anacondatest, and sharing the 'check if the repo was used' logic between all the tests (by making it into a test step that's loaded for all of them). I also simplified the 'was repo used' checks a bit, it seems silly to run a 'grep' command inside the VM then have os-autoinst do a grep on the output (which is effectively what we were doing before), instead we'll just use a single grep within the VM, and clean up the messy quoting/escaping a bit. Test Plan: Run all tests - at least all repository tests - and check they work (make sure the tests are actually still sane, not just that they pass). I've done runs of all the repo tests and they look good to me, but please double-check. I'm currently re-running the whole 24-20160609.n.0 test on staging with these changes. Reviewers: jskladan, garretraziel Reviewed By: garretraziel Subscribers: tflink Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
2016-06-13 15:42:30 +00:00
assert_script_run "systemctl restart tgtd.service";
assert_script_run "systemctl is-active tgtd.service";
## NFS
# create the file share
assert_script_run "mkdir -p /export";
# get the kickstart
assert_script_run "curl -o /export/root-user-crypted-net.ks https://jskladan.fedorapeople.org/kickstarts/root-user-crypted-net.ks";
# create the repo share
assert_script_run "mkdir -p /repo";
# create a mount point for the ISO
assert_script_run "mkdir -p /mnt/iso";
add NFS tests (and DHCP/DNS in the support server) Summary: Set up the support server to provide DHCP/DNS functionality and an NFS server, providing a kickstart. Add a kickstart test just like the other root-user-crypted-net kickstart tests except it gets the kickstart from the support server via NFS. Also add NFS repository tests and a second support server for Server-dvd-iso flavor: this test must run on that flavor to ensure that packages are actually available. The support server just mounts the attached 'DVD' and exports it via NFS. Note we don't need to do anything clever to avoid IP conflicts between the two support servers, because os-autoinst-openvswitch ensures each worker group is on its own VLAN. As part of adding the NFS repo tests, I did a bit of cleanup, moving little things we were repeating a lot into anacondatest, and sharing the 'check if the repo was used' logic between all the tests (by making it into a test step that's loaded for all of them). I also simplified the 'was repo used' checks a bit, it seems silly to run a 'grep' command inside the VM then have os-autoinst do a grep on the output (which is effectively what we were doing before), instead we'll just use a single grep within the VM, and clean up the messy quoting/escaping a bit. Test Plan: Run all tests - at least all repository tests - and check they work (make sure the tests are actually still sane, not just that they pass). I've done runs of all the repo tests and they look good to me, but please double-check. I'm currently re-running the whole 24-20160609.n.0 test on staging with these changes. Reviewers: jskladan, garretraziel Reviewed By: garretraziel Subscribers: tflink Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
2016-06-13 15:42:30 +00:00
# mount the ISO there
assert_script_run "mount /dev/cdrom /mnt/iso";
# copy the contents of the ISO to the repo share
assert_script_run "cp -R /mnt/iso/* /repo";
# put the updates image in the NFS repo (for testing this update
# image delivery method)
assert_script_run "curl -o /repo/images/updates.img https://fedorapeople.org/groups/qa/updates/updates-openqa.img";
add NFS tests (and DHCP/DNS in the support server) Summary: Set up the support server to provide DHCP/DNS functionality and an NFS server, providing a kickstart. Add a kickstart test just like the other root-user-crypted-net kickstart tests except it gets the kickstart from the support server via NFS. Also add NFS repository tests and a second support server for Server-dvd-iso flavor: this test must run on that flavor to ensure that packages are actually available. The support server just mounts the attached 'DVD' and exports it via NFS. Note we don't need to do anything clever to avoid IP conflicts between the two support servers, because os-autoinst-openvswitch ensures each worker group is on its own VLAN. As part of adding the NFS repo tests, I did a bit of cleanup, moving little things we were repeating a lot into anacondatest, and sharing the 'check if the repo was used' logic between all the tests (by making it into a test step that's loaded for all of them). I also simplified the 'was repo used' checks a bit, it seems silly to run a 'grep' command inside the VM then have os-autoinst do a grep on the output (which is effectively what we were doing before), instead we'll just use a single grep within the VM, and clean up the messy quoting/escaping a bit. Test Plan: Run all tests - at least all repository tests - and check they work (make sure the tests are actually still sane, not just that they pass). I've done runs of all the repo tests and they look good to me, but please double-check. I'm currently re-running the whole 24-20160609.n.0 test on staging with these changes. Reviewers: jskladan, garretraziel Reviewed By: garretraziel Subscribers: tflink Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
2016-06-13 15:42:30 +00:00
# set up the exports
assert_script_run "printf '/export 10.0.2.0/24(ro)\n/repo 10.0.2.0/24(ro)' > /etc/exports";
# open firewall port
assert_script_run "firewall-cmd --add-service=nfs";
# start the server
assert_script_run "systemctl restart nfs-server.service";
assert_script_run "systemctl is-active nfs-server.service";
# report ready, wait for children
mutex_create('support_ready');
wait_for_children;
}
sub test_flags {
# without anything - rollback to 'lastgood' snapshot if failed
# 'fatal' - whole test suite is in danger if this fails
# 'milestone' - after this test succeeds, update 'lastgood'
# 'important' - if this fails, set the overall state to 'fail'
return { fatal => 1 };
}
1;
# vim: set sw=4 et: