These showed up because I did a manual universal flavor run on
an ISO today, but we'll need them as soon as we do a candidate
compose too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These only get used when we run universal tests on a non-Server
image, which is pretty rare (these days, as Server DVD is a
critical image and composes fail if it fails, it only really
happens when we do it manually for some reason, like I did
today). So they get stale and aren't updated for font rendering
changes and stuff. As I said I had to do a run like that today,
so I had to update all these needles...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is doing slightly less to exercise the launcher menus and see
whether icons appear or disappear, but it's much faster and more
reliable. We do still use menu launch for one app, just to check
the mechanism works in general.
The top bar differs in non-English languages - for RTL the
version ident is on the left (so background is different), and
the width of the area with no text differs depending on the
length of the translations.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a whole wodge of stuff to support_server to make it
act as a PXE server, then adds a new test which boots from PXE
and so should hit the PXE server. We use the NFS install repo as
that can be relied on to work for a support_server install.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems like there's been a change to freetype or something, text
rendering changed in all of these. Note there's one workaround
needle for an untranslated message in Japanese.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Split this out of install_default, because it really is not a
part of that test and we do not want that test to fail because
the desktop background is wrong. Make it its own test module
and test suite instead. Don't do it on Rawhide, because we
really can't assert anything worthwhile about Rawhide at the
moment at least (this means the test runs but is a no-op and
will always pass on Rawhide, unfortunately). Move the needles
to a more appropriate location (this has nothing to do with
anaconda) and use 'background' not 'wallpaper' naming (that's
the name we use elsewhere in the project, e.g. package names).
Also, run the test on updates, and add an F29 needle for this
purpose.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The backgrounds we have are F30 backgrounds, not F31: there are
no F31 backgrounds yet, F31 images are using F30 backgrounds
(which is a bug we should file). Also we really only need one
F30 background needle to match both KDE and GNOME if we pick a
sensible area of the screen to use, and let's use one that has
a bit more contrast for safer matching.
Note: F30 background is *meant* to be animated, but in fact
neither GNOME nor KDE seems to use the animated version by
default. Which makes our lives easier! Sucks for whoever put in
the work to animate it, though.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Cockpit 198 comes with a UI overhaul, so almost all needles
need an update.
The 'auditd' service is no longer on the first page. To make
this less fragile (at the cost of not testing that clicking on
a service actually opens the detail page *for that service*,
tweak the needles to just look for *any* running service, click
on it, and check we got to a 'details' page. We also redo the
existing needles for this design.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
@lruzicka added this to the KDE app tests in 71c4e273, but there
was no need for a new needle as I'd already done the same thing
in the desktop updates tests; let's just use the same needle.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is really a 'generic' needle since it'd be needed for any
RTL language test, it's not specific to arabic.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Mainly because the GDM background became a lighter shade of
grey, for some reason, but also some dialog and icon changes.
Also put all forms of layout_us_ltr-gdm in the same directory.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Removing this broke the GNOME apps test entirely because there
was no GNOME 'workspace' needle any more.
I don't like this needle much, we should probably use
check_desktop_clean or something instead. But for now let's just
put it back.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The way KDE does update notifications has changed - it's now a
permanent pop-up notification. This is a bit awkward for our
logic; it's hard to define a needle that proves this pop-up is
the only notification. Instead, let's dismiss it, then open the
notification tray and assert that there aren't any others. But
we also retain the old behaviour (more or less) for testing old
releases.
The popup notification also blocks the 'refresh' needle in the
systray and so breaks the desktop update test, so we deal with
that too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Since the KDE menus have transparency set, any time the wallpaper
changes the menus will look different, and the app tests may
fail. This sets the desktop wallpaper to black at the start of
the test suite to avoid this problem.
In the last few weeks Boxes is showing an auth dialog on start.
I've filed a bug on this; let's have the test handle it as a
soft failure, since this isn't a fatal problem. Do this by
making an existing needle for this dialog a bit more generic
in name and using it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The KDE and GNOME 'apps' tests for Firefox both invented their
own 'oh look Firefox is running' needle, even though we already
had one. The GNOME one was broken by the removal of the app
title bar in Firefox 66.
Instead of having three needles for the same thing, let's just
throw the 'apps' ones out and use the pre-existing one from
needles/firefox for all cases.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Utilities came up different *again* in a Rawhide test today, so
this adds a needle which matches on the text. Usually we prefer
image matches to text, but this image seems to keep changing...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Add png files as a background for the needles.
Rewrite the test handling methods to make them ready for KDE
Add the ABRT startstop test.
Make changes and corrections to the abrt test.
Add test for Firewall.
Add test for DNF dragora.
Add wait time for dnfdragora test.
Correct syntax.
Add Language test.
Make some changes to the DNF dragora test.
Add Users test case.
Add needles for DBUS viewer test.
Add Dbusviewer test.
Add Mahjong test and needles for games.
Add Minesweeper tests.
Add Patience test.
Add test for Document Viewer.
add test for gwenview
Add test for koulourpaint.
Add test for Kruler
Add test for Kcolorchooser
Reneedle failing needle.
Add ktorrent tests.
Add tests for CPT editors.
Add test for Krfb
Fix names for those files.
Add test for Kget
Add Akregator test.
Add test for Konversation.
Make Konversation end really.
Add tests for Kmail
Add test for PIM exporter.
Add test for KTnef and Krdc.
Fix problems after test runs.
Make more tries.
Fix needle to be found better.
Fix more errors.
Add test for Falkon.
Add tests for browsers.
Add support for closing tabs into Firefox test.
Add tests for K3B
move needles to correct directory
Add Kaddressbook test.
Add Kontakt text.
Add test for korganizer.
Add menu office needle and correct konqueror needle.
Add test for calligra stage.
Add test for Calligra.
Add test for network connections.
Modify needle for kaddressbook to prevent failing.
Add test for system settings and fix others.
Add test for FMW.
Add test for Dolphin
Add test for Infocenter.
Add test for kparted.
Fix a wrong needle.
Test relnotes.
Fix some errors in tests.
Add test for Discover.
Add test for Ksysguard.
Add tests for Konsole.
Add tests for KDE wallet.
Add tests for several utilities.
Add Krusader test.
Finish utility tests.
Fix some errors.
Fix needle for spectacle.
Add wait time to let Dragora wait for network.
I don't know why the ones I *just created* don't always match,
but they don't. Let's just have a bunch of needles and in a few
weeks I'll look and see if any are never matching, and get rid
of them.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In latest Branched, 'Close Tabs' button has an upper-case T, and
the addon install button is a darker blue.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Dunno why we need yet *another*, but even the new one didn't
match on the most recent Branched compose. For now just add
another, we can look in a few weeks which can be thrown away.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
As of Fedora-30-20190316.n.1, gnome-abrt is back under the
Utilities menu and the 'Sundry' menu seems to have disappeared.
Change the test back to using utilities and drop the sundry
needle.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We want to get accurate results from the rest of the upgrade
test and we know about this bug, so let's make it a soft fail
so we can see how the test is functioning otherwise.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Investigation suggests that the Firefox certificate validation
failure we sometimes get when loading the FreeIPA web UI in the
freeipa_webui test module is a race issue in Firefox itself:
https://bugzilla.mozilla.org/show_bug.cgi?id=1530429
refreshing the page seems to work around the problem, so let's
do that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The 'largetext' version of the needle is needed when there's
some notification displaying over the window title, it seems
F28's current font rendering doesn't match the current version
of that needle...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're getting an intermittent case where FreeIPA tests fail
because of a web server certificate issue. Click 'Advanced' in
Firefox when this happens so we can get a bit more info on the
problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
ctrl-t seems to be failing often in Firefox tests, and I can't
figure out why. Let's try clicking the 'new tab' button instead
as a workaround.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The Adwaita icon theme got some changes in a git snapshot build
for Rawhide recently. These changed icons break various needles,
we need new ones.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Fedora logo is missing from GDM in today's Rawhide. Not going
all the way and making this a soft fail as the bug is known and
should be fixed soon, I'll take the needle out again then.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're getting a spurious "Authentication required" for a
background refresh of the system repos sometimes, depending on
whether it happens while we're at a tty. This is now accepted
by upstream, so let's handle it and make it a soft failure for
now.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
New GTK+ changed something so the background of many interface
elements is a slightly lighter grey, this broke a bunch of
needles. Here are the retakes. Includes one not-strictly-related
SDDM update and a rename of the one @lruzicka did to match the
others.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The needle could sometimes fail because the item it was looking
for only appeared in a limited set of situations. The new
location should be safer to check and the test should not
fail as a result.
This adds a test which builds a netinst image potentially with
the package(s) from the update, and uploads that image. It also
adds a test which runs a default install using that image. This
is intended to check whether the update breaks the creation or
use of install images; particularly this will let us test
anaconda etc. updates. We also update the minimal disk image
name, as we have to make it bigger to accommodate this test,
and making it bigger changes its name - the actual change to
the disk image itself is in createhdds. We also have to redo a
bunch of installer needles for F28 fonts, after I removed them
a month or so back...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
If a test fails to the dracut shell, we currently don't do
anything useful. This should recognize when that happens, and
upload rdsosreport.txt.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It's my second least favorite day of the year again: Stale
Needle Cleanup Day!
This should get rid of all non-anaconda needles that definitely
are not being used any more. Cleanup of all anaconda needles was
in the previous commit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It's my second least favorite day of the year again: Stale
Needle Cleanup Day!
This should get rid of all anaconda needles that definitely are
not being used any more. A few borderline cases (where I'm not
100% sure if they may still be useful in odd corner cases, like
running universal tests on non-server images, and runs outside
of the US, and stuff) are kept around.
Cleanup of all non-anaconda needles will be in the next commit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This was part of a workaround for a Fedora Atomic Workstation
(old name for Silverblue) issue that got resolved a while back;
we forgot to take the needle out.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It seems Rawhide auto-signing is working fine now: openQA claims
this needle has 'never' been matched (which really means 'not
for a long time'), and I can't find any test fail in the last
year which looks like it landed on this 'authenticate' screen
but the needle failed to match, or anything like that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's really no point having separate error and error_report
needles. Just match on error_report as well as clicking on it.
Also add a new error_report needle for latest Rawhide fonts.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
GNOME Software 3.30.5 split the offline update process into two
separate 'download' and 'apply' phases. So we need to handle
clicking 'download' before 'apply', if that happens.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Somehow, recently, FreeIPA tests are running into Firefox not
quitting because it's showing a warning about closing multiple
tabs. (I think we didn't *get* multiple tabs before but now we
do, for some reason). So let's work around this by clicking
"Close tabs" if the warning appears.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're not seeing *exactly* #1314991 any more, but we're seeing
something that looks quite similar: the first attempt to find
updates just doesn't find any. No error message, no updates. I
have reported a bug for this and am investigating it, in the
meantime, let's restore the workaround, elaborated a bit, and
looking for the 'Software is up to date' screen instead of the
error message.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I rather suspect the *bug* is still basically present and it's
why this test often fails, but we no longer seem to see the
*error message* which lets us detect the bug happening. This
needle has not been hit by any test for six months. So let's
remove the workaround as it adds complexity.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
An selinux alert can hide the 'getting started' window title, so
let's have a variant needle which matches on the big 'Started'
in the window instead. We may as well have both for maximum
match potential.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The --MORE-- text looks different with the UEFI firmware font,
so we need another needle. Also I named the original needle
wrong, bad me.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Per Neal Gompa boot will proceed if we just page through the
error(?) messages displayed when #1618928 happens, so let's do
that to let the tests get further and see what else is broken.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
So that we get the crash info uploaded. Note these are not
language-tagged as we *don't* want to 'test' translation of
these, we want the best possible chance of matching any error
dialog in any language...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
anaconda's new hub layout makes all the icons smaller, so all
these needles needed re-doing, even though the same icons are
present...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems sometimes tests are showing up with the date/time spoke
in a non-active highlighted state or something, don't really
know why, but it's not broken and we should just accept it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems on x86_64 the text cursor is at the left of the text entry
box, but on aarch64 it's at the right. I have no idea why.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sometimes on aarch64 clicking the partition scheme drop-down
just doesn't seem to make the menu appear, instead the button
goes active but that's all. It's very unlikely we'll be able
to track down why as this doesn't happen in manual testing on
aarch64 (according to @pwhalen), so instead let's just work
around it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These all are caused by a new desktop background and bits of
KDE desktop chrome apparently becoming translucent.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The background is now blue for ppc64le, so add related needles as bypass.
no such problem with ppc64 (BE)
problem initially detected on Rawhide compose 20180204
but still present on f28 compose 20180302
and Rawhide compose 20180513
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1403365 has been
around approximately forever and I still haven't managed to
debug it; let's just make needles for it, as it's not really a
critical bug, the system still *works*.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
For quite a while on i386 the 'enter passphrase' console screen
has used bright white text, for some reason. Let's just have a
variant needle for this instead of worrying too hard about why.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We've been seeing an odd case lately where the language select
screen is not foregrounded when it appears (so all text is
grey). It happens very occasionally on x86_64, but a lot on
ppc64. To work around this, let's add a needle that matches the
inactive screen, and click on the screen when it appears just
to make sure it's active.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE in F28+ seems to show a network connection notification on
live boot, for some reason. Just dismiss it to help the test
pass.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems like the indicator arrow's vertical position changed in
F28, for some reason. Anyway, new needles.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
...I hope. This is necessary as we now have a case where it
needs to match post-install (aarch64 support_server, since
aarch64 is always UEFI).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In the most recent Rawhide compose, anaconda has changed how it
names volume groups (again), and now the VGs in openQA installs
have rather longer names. This winds up causing a problem for
this needle: the column where the 'Device Type' dropdown is
placed actually gets narrower (because the column to the right,
which has the volume group name in it, is wider), and so the
dropdown box is narrower, and the arrow protrudes into the area
which the needle expects not to have an arrow in it. So, let's
make the match area slightly narrower.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Rawhide has a bit of a problem where its 'description' of an
iSCSI disk is so long that the other columns that should appear
in the CONFIGURE MOUNT POINT dialog don't. This means our
device_sda_selected needle doesn't match, because the column
where 'sda' should appear isn't visible.
So add a soft-fail needle to cover this case; we know what the
description for the disk that's 'sda' in this case looks like,
so match on that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Time for an annual spring clean. Based on the admin UI's list
of needles that haven't been matched for a long time, but with
some manual tweaking (some are actually still needed).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This somehow snuck in (in the wrong directory) with the ppc64
merges, but it's not needed. I've verified with the admin tab
for checking on needle use; this needle has never been matched,
and all the ppc64 text install tests match the non-variant
needle just fine. So I'm removing this unneeded variant.
The way GNOME Software displays an error after running into RHBZ
1314991 has changed, it seems, so we need a variant needle to
cope with that. Also, when an upgrade notification is visible,
the 'Restart & Update' button for doing a regular update is
shown in grey (not blue), so we need a variant needle to handle
that too.
Because "Rescue Mount" now replaced by "Rescue Shell" string
in expected rescue screen head.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
The font Firefox uses when we don't ensure dejavu is installed
seems to bounce around a bit, so let's ensure the dejavu fonts
are there before we start Firefox. Also update a needle for
this.
Seems like it doesn't display "Initial setup for Fedora 27" any
more, so the old needle doesn't match. We should look into
whether that's a bug, but for now, let's update the needle.
Matching on the user name really isn't doing much good. It just
means we need more variant needles. Let's ditch that part of the
match and just match on the distinctive character sequence ~]$,
which doesn't really occur for any other reason. With this we
can drop the separate 'qwerty' needle (since the qwerty case
will match the regular needle now) and should also handle the
FreeIPA tests that are failing in Rawhide because a logged in
FreeIPA user doesn't just have a sh prompt now.
We can deal with this annoying bug by looking out for the error
we see when it happens, hitting the 'refresh' button again, and
resetting the loop counter to 1 (requires changing the loop to
a C-style loop).
This is required because anaconda is still checking for it
even if not mandatory. Already tracked by bug
https://bugzilla.redhat.com/show_bug.cgi?id=1172791
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
related to known bug
https://bugzilla.gnome.org/show_bug.cgi?id=771127
like other needles with same bgo#771127 reference
do not set it as Workaround needle.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
* New OFW variable to identify Open Firmware (used by PowerPC)
* Few needles changes for PowerPC support
* as requested do not change the timers value below for PowerPC
tests/install_source_graphical.pm (300 to 600)
tests/_boot_to_anaconda.pm (300 to 1200)
This will be handled by TIMEOUT_SCALE in templates
Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
There's a bug in current Rawhide causing sourcing of /etc/bashrc
to fail when logging in as a regular user. This results in the
bash prompt looking different, which is currently a hard fail,
and causes most tests to die. It's better to treat this as a
soft fail so the rest of the test can run. So add a needle to
spot this case, and a little finish function the console login
function calls whenever it's successfully logged in, to check
whether it got the no-profile prompt and register a soft fail.
That other one didn't help, so let's try this - try and spot if
the spoke is in the unexpected state (the needle should only
match if the spoke is done processing and still in warning
state, it shouldn't match while the needle is still thinking)
and click through it again if so.
Well, that OCR needle isn't working out so great, as it seems
to match when it shouldn't:
https://openqa.fedoraproject.org/tests/119217#step/_graphical_wait_login/5
So let's try another approach. Ditch the OCR needle and have a
function for checking we're at a clean desktop. It does the
normal needle match, but if we're on GNOME, it also tries
hitting alt+f1 and seeing if we're at the overview; if so, it
hits alt+f1 again (to go back to the desktop) and returns.
https://openqa.fedoraproject.org/tests/117131 shows a spurious
match of the anaconda warning_bar needle - it's matching in an
ad for LibreOffice. Add a bit of the grey above the bar, so
hopefully this won't happen any more.
The F26 background does not change with the time of day, so that
needle should serve as-is, it's just no use for Rawhide. For
Rawhide, let's try a needle with an OCR match on 'Activities',
plus a tiny match area for a pure white block (expected to be
matched in the user menu area), since os-autoinst requires all
needles to include a match area for some reason.
These are no use :/ The Rawhide default background is a 'changes
with the time of day' one, and with the transparent top bar,
that makes a proper needle match impossible to reliably achieve,
as there is not a single pixel of the 'clean desktop' which
will always be the same any more. We'll have to come up with
something else. I'm trying out the use of an OCR match now.
The GNOME top bar is now transparent in Rawhide, which broke the
'clean desktop' needle. It also means it'll break every time
the background changes, from now on :( Update the needle.
Seems like the top '[patch]' link on kernel.org may now be a
raw patch file which the browser just displays, not a compressed
patch it offers to download. So tweak the needle so we should
click on the *bottom* link instead. openQA looks for matches
as close as possible to the location in the needle.
When running universal tests with a non-Server image, which is
not common but *does* happen (e.g. manually built test image),
the pre-selected filesystem in blivet-gui will be ext4 not xfs
(just as with custom partitioning). So we need xfs and ext4
variants of this needle. Renamed the XFS one for consistency.
Summary:
This adds a new test suite, run for Workstation and KDE live
images, which does not create a user during install. It then
expects initial-setup (KDE) or gnome-initial-setup (Workstation)
to appear after install, creates a user, and proceeds with
normal boot.
Note the ARM image test already covers the initial-setup text
mode, and the ARM minimal image is the only case where that
actually matters (it's not included in Server).
Test Plan:
Run the new tests, check they work. Run all old
tests, check the changes didn't break them.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1185
They got rid of the 'Dashboard' text we were matching on, so
let's change this needle. This 'Hardware' text should show up
in all cockpit versions, I think.
Summary:
This is to handle cases like #1414904 , where the system boots
to emergency mode. We really need logs to try and debug this.
Test Plan:
Force a test to hit emergency mode somehow (right now
you can just run base_services_start on Rawhide over and over
until you hit #1414904, but there's probably an easier way to
do it, I think there's a systemd boot arg to tell it which target
to boot for e.g.) and check logs get uploaded. Also check this
doesn't break log upload for a 'normal' failure.
Reviewers: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1103
openQA has some problems handling needles with identical names
in different subdirectories. We haven't had the cycles to send
fixes for this yet, so for now, let's just rename all such
needles we have.
Not sure if the color change will occur in Fedora 25 nightlies
or not, so not sure if we can remove the old needles. But we
*can* remove the F24 needles now I think.
Summary:
Since 26.17, anaconda shows a warning when the user password
contains non-ASCII characters, and requires a second Done click
to confirm. This change should handle that.
On the 'catch cases where password typing went wrong and re-try'
bit: to keep that, but not re-type the password *every single
time* on the Russian install test, we'd have to make the needle
match the text of the warning. This is problematic because then
that needle will be able to break without us easily noticing;
that's why I wanted to keep the 'warning bar' needle text-free.
Unfortunately, that means we have to skip the protection for
switched-layout installs.
Note the protection was actually not working for any non-English
install anyhow, because the needle had `LANGUAGE-english` as a
tag. We never noticed that. Failed password typing is pretty
rare now, so we can live without the protection - it's just nice
to have it for the English install tests because there's so many
of them.
Test Plan:
Run the Russian install with a recent Rawhide image,
check it clicks 'Done' twice. Note, it will still fail, because
of RHBZ #1413813.
Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1084
The F25 'desktopencrypt' images built by createhdds boot to a
console passphrase entry screen, not graphical. F24 images
built the same way boot to a graphical passphrase entry screen.
I'm not sure why, but it's not really worth spending a lot of
energy on, I don't think - let's just add a needle to cover
this case.
Summary:
Include some basic testing of Japanese input, and split the
input testing (including Russian) into a separate module, since
it's not really part of 'login' testing.
Test Plan:
Run the test, and the Russian and French tests too to
make sure they didn't break. Tested on staging. Note the Japanese
test soft fails, intentionally, at present, as I discovered a bug
while working on it:
https://bugzilla.gnome.org/show_bug.cgi?id=776189
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1072
Summary:
This isn't in the criteria, but it's commonly used, so we ought
to test this way. Require authentication for the iSCSI target
and have the test provide the appropriate auth info.
Test Plan:
Run the iscsi test and check it works (you need the
recent fixes for support_server to make *that* work). Nothing
else should be affected.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1070
Summary:
The non-English tests so far did not test that graphical login
worked as expected, which is a fairly large hole. With this
change, they should do a Workstation install and test login to
both GNOME and the console works as expected. KDE is not yet
tested.
As part of this we tweak the implementation of keyboard layout
switching in graphical environments to use a generic function
in main_common which can handle both anaconda and desktops
(just GNOME at present, but should extend easily to any desktop
with a known switcher key and a visible layout indicator),
replacing the anacondatest class method. I kinda don't like that
the test has to specifically tell the function when it's in
anaconda, but I don't think I want to start experimenting with
a global 'test phase' openQA variable or anything like that at
present.
Fixes T842.
Test Plan:
Run the French and Russian install tests and check
they work as expected. Also run an English Workstation install
if you like, and make sure that didn't break. This change is
live on staging ATM, seems to work fine.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Maniphest Tasks: T842
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1071
Summary:
GNOME's update notification criteria are pretty braindead: it
fires the update check timer once on login then once every hour
thereafter, but only actually checks for and notifies of updates
once a day if it's after 6am(?!?!?!). So we have to do a bunch
of fiddling around to ensure we reliably get a notification.
Move the clock to 6am if it's earlier than that, and reset the
'last update check' timer to 48 hours ago, then log in to GNOME
after that.
Note: I thought this still wasn't fully reliable, but I've looked
into all the recent failures of either test on staging and
there's only one which was really 'no update notification came
up', and the logs clearly indicate PK did run an update check,
so I don't think that was a test bug (I think something went
wrong with the update check). The other failures are all 'GNOME
did something wacky', plus one case where the needle didn't quite
match because I think the match area is slightly too tall; I'll
fix that in a second.
Test Plan:
Run the tests on both KDE and GNOME and check they
work properly now (assuming nothing unrelated breaks, like KDE
crashing...)
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1039
OK, we once again hit an annoying case where the button match
that doesn't include text got matched in the sidebar:
https://openqa.fedoraproject.org/tests/39576#step/_do_install_and_reboot/13
so I think it's time to give up on that approach and just go
ahead and deal with the button text varying between live and
traditional installs. So let's change the existing needles to
include the button text and add one new needle to cover the
English live F25/F26 case. I don't think we need a 'quit'
needle for F24 (as the only thing we test for F24 is the Atomic
installer image, which says 'Reboot') or for French or Russian
(as we only test a traditional installer image for those, not
a live image).
Summary:
I started out wanting to fix an issue I noticed today where
graphical upgrade tests were failing because they didn't wait
for the graphical login screen properly; the test was sitting
at the 'full Fedora logo' state of plymouth for a long time,
so the current boot_to_login_screen's wait_still_screen was
triggered by it and the function wound up failing on the
assert_screen, because it was still some time before the real
login screen appeared.
So I tweaked the boot_to_login_screen implementation to work
slightly differently (look for a login screen match, *then* -
if we're dealing with a graphical login - wait_still_screen
to defeat the 'old GPU buffer showing login screen' problem
and assert the login screen again). But while working on it,
I figured we really should consolidate all the various places
that handle the bootloader -> login, we were doing it quite
differently in all sorts of different places. And as part of
that, I converted the base tests to use POSTINSTALL (and thus
go through the shared _wait_login tests) instead of handling
boot themselves. As part of *that*, I tweaked main.pm to not
require all POSTINSTALL tests have the _postinstall suffix on
their names, as it really doesn't make sense, and renamed the
tests.
Test Plan: Run all tests, see if they work.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1015
When a package is unsigned, KDE will prompt for authentication.
Let's handle this. But count it as a soft fail, because
puiterwijk claims that Rawhide packages will be autosigned
from next week, so this *should* not happen and would indicate
an unsigned package in the repos. We make the KDE 'update
complete' needle area smaller because the wider area includes
some transparency and so will only match if the update applet
is open; this area will match whether it's open (no auth case)
or not open (auth case - the applet seems to disappear after
you provide the password in the auth prompt).
Pushing without review as the test is in production so I want
to make sure it works correctly.
(Also, hey, check out that array match for assert_screen and
that match_has_tag! This is gonna make some things so much
easier...thanks upstream)
Summary:
this more or less covers desktop_error_checks and desktop_
update_notification, though it can't really distinguish
between them easily. All we know is that if both the live and
postinstall versions of this test pass, both of those tests
pass. Any fails will have to be investigated manually.
Test Plan:
Run the tests for both KDE and Workstation, see
what happens. Workstation will fail for F25 and Rawhide at
present, due to SELinux/abrt notifications.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1004
Summary:
Very similar to the CLI update test, but using the desktops'
update applications. This is based off the CLI update test
branch as it uses the shared functions that branch introduced.
We do not use the fake update packages, as they don't really
do anything useful for these tests; for dnf they can help us
distinguish between issues with the dnf mechanism and issues
with the repos, but we can't really tell that in the graphical
case. So we only use the python3-kickstart package here.
Test Plan:
Run the test on both KDE and GNOME and ensure it
performs as intended. I've been testing it on staging, so you
can see it there.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1010
Summary:
by waiting for the bootloader in _boot_to_anaconda rather than
_console_wait_login, we can ensure that we use the anaconda
post-fail hook and thus get logs uploaded when a kickstart
install fails.
Test Plan:
Run a kickstart install test that fails and check
anaconda logs get uploaded. Then run one that works and make
sure it...still works.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1005
seems to affect the network spoke a lot but not anywhere else.
Odd. Anyhow, here we go. Keeping the old needles for now as
F25 still has the old rendering.
Summary:
I've been wanting to do this for a while, but
https://github.com/os-autoinst/openQA/issues/786 is making it
difficult. Still, I think the quantity of needles is slowing
down openQA, so I'm doing it the old-fashioned way - looking
through test results and seeing what needles are actually used
now.
Test Plan:
Run full test suite for 24 Atomic, 25 and Rawhide and
make sure all tests still work. This is currently deployed on
staging (along with key-fixes) and I'm testing it there.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D994
Summary:
the main thing this does is try and type slower in X - this
should cover nearly everywhere we type anything in X, and make
it type slower. We also add a bit more safety checking to some
old tests which didn't have it (mainly _do_install_and_reboot)
- wait_still_screen after typing to make sure all the keypresses
were registered before continuing.
This is an attempt to mitigate the problems we've seen where
the wrong text gets typed into the wrong places and the tests
break.
This branch is live on staging atm. It still has *some* issues,
but I do think it's an improvement.
Test Plan:
run the tests (probably several times), compare to
runs without the change, see if it's better or worse...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D993
so what seems to be going on on the software selection screen
is some kind of GTK+ bug:
https://bugzilla.gnome.org/show_bug.cgi?id=771127
the radio button bullets don't always render correctly - I think
they're not always completing a transition they go through on
selection. I think they can get stuck in any state between 'grey
and small' and 'black and big', but for now these are the needles
I've managed to create from failures; we're missing a 'greyer
KDE' variant, but if that happens, we can add it. If the bug
gets fixed we should be able to drop all these.
these rarely get used any more. they're only used when we're
running the filesystem tests on a non-Server image, where the
default fs is ext4 not xfs. With the old nightly process, where
we only got a generic boot.iso, we used them all the time, but
now we get product-ized nightlies, we rarely do. But I did hit
them today running the universal tests with a generic boot.iso
I hand-built to test an anaconda update, so in case we need to
do that kind of thing again in future, we may as well update
the needles.
Summary:
we have a long-standing problem with all the tests that hit
the repositories. The tests are triggered as soon as a compose
completes. At this point in time, the compose is not synced to
the mirrors, where the default 'fedora' repo definition looks;
the sync happens after the compose completes, and there is also
a metadata sync step that must happen after *that* before any
operation that uses the 'fedora' repository definition will
actually use the packages from the new compose. Thus all net
install tests and tests that installed packages have been
effectively testing the previous compose, not the current one.
We have some thoughts about how to fix this 'properly' (such
that the openQA tests wouldn't have to do anything special,
but their 'fedora' repository would somehow reflect the compose
under test), but none of them is in place right now or likely
to happen in the short term, so in the mean time this should
deal with most of the issues. With this change, everything but
the default_install tests for the netinst images should use
the compose-under-test's Everything tree instead of the 'fedora'
repository, and thus should install and test the correct
packages.
This relies on a corresponding change to openqa_fedora_tools
to set the LOCATION openQA setting (which is simply the base
location of the compose under test).
Test Plan:
Do a full test run, check (as far as you can) tests run sensibly
and use appropriate repositories.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D989
Summary:
the dictionary error bug was fixed some time back, so drop this
workaround for it.
Test Plan:
Run all tests for F25 and Rawhide and verify they don't need
this workaround any longer.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D988
this needle can actually also match the 'Delete all' button,
resulting in the test not doing what it should. openQA should
prefer the match closer to the area's location in the needle,
but https://openqa.fedoraproject.org/tests/31136 seems to show
this not happening, so let's make the match area wider in all
versions of the needle so it should no longer match the Delete
all button.
font rendering has changed somehow in both Rawhide and F25
updates-testing, retake a bunch of needles for this. Some more
may be needed later in tests that are currently failed or
skipped for other reasons.
this isn't actually f25 specific, I don't think...the tests
that failed are the Workstation network install tests, which
use updates-testing, so I think they're getting the same font
rendering change as just showed up in Rawhide. So these should
actually be correct for both branches, let's just leave the
name as the date.
looks like some font change occurred at some point, this test
hasn't reached this point for a long time so I can't really pin
down what changed, so just name it for the date.
seems like the overlay of the little 'speech bubble' triangle
changed a bit, with a recent GTK+ or something I guess. Since
this test is quite new we shouldn't need to keep the old
version, so just replace the screenshot.
Summary:
pretty simple stuff here. The distinction between 'firefox' and
'browser' is that the 'browser' needles I expect would also be
correct for other default browsers, while the 'firefox' needles
are specific to Firefox. We need '-kde' variants of some Firefox
needles where interface text is included, because the font is
Cantarell in GNOME but whatever the default 'sans' font is in
KDE - I suppose we should really use -thatfontsname rather than
-kde, but I can't think what it's called...
I couldn't do the 'log in to FAS' bit of the test since we don't
really have a sane way to provide a password while not exposing
it to the public.
Test Plan:
Run the test, check it works - for both KDE and
Workstation.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D938
Summary:
again, added as a non-fatal module for realmd_join_cockpit as
it's convenient to do it here. Also abstract a couple of ipa
bits into a new exporter package in the style of SUSE's
mm_network, rather than using ill-fitting class inheritance as
we have before - we should probably convert our existing class
based stuff to work this way.
Also a few minor tweaks and clean-ups of the other tests:
The path in console_login() where we detect login of a regular
user when we want root or vice versa and log out was actually
broken because it would 'wait' for the result of the 'exit'
command, which obviously doesn't work (as it relies on running
another command afterwards, and we're no longer at a shell).
This commit no longer actually uses that path, but I spotted
the bug with an earlier version of this which did, and we may
as well keep the fix.
/var/log/lastlog is an apparently-extremely-large sparse file.
A couple of times it seemed to cause tar to run very slowly
while creating the /var/log archive for upload on failure. It's
no use for diagnosing bugs, so we may as well exclude it from
the archive.
I caught cockpit webUI login failing one time when testing the
test, so threw in a wait_still_screen before starting to type
the URL, as we have for the FreeIPA webUI.
I also caught a timing issue with the openQA webUI policy add
step; the test flips from the Users screen to the HBAC screen
then clicks the 'add' button, but there's actually an identical
'add' button on *both* screens, so it could wind up trying to
click the one on the Users screen instead, if the web UI took
a few milliseconds to switch. So we throw in a needle match to
make sure we're actually on the HBAC screen before clicking the
button.
We make the freeipa_webui test a 'milestone' so that if the
new test fails, restoring to the last-known-good milestone
doesn't take so long; it actually seems like openQA can get
confused and try to cancel the test if restoring the milestone
takes a *really* long time, and wind up with a zombie qemu
process, which isn't good. This seems to avoid that happening.
Test Plan:
In the simple case, just run all the FreeIPA-related
tests on Fedora 24 (as Rawhide is broken) and make sure they all
work properly. To get a bit more advanced you can throw in an
`assert_script_run 'false'` in either of the non-fatal tests to
break it and make sure things go properly when that happens (the
last milestone should be restored - which should be right after
freeipa_webui, sitting at tty1 - and run properly; things are
set up so each test starts with root logged in on tty1).
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D935
Summary:
This requires us to handle decryption each time we reboot in
the upgrade process, so factor that little block out into the
base class so we don't have to keep pasting it. It's also a
bit tricky to integrate into the 'catch a boot loop' code we
have to deal with #1349721, but I think this should work. There
is a matching openqa_fedora_tools diff to generate the disk
image.
Test Plan:
Run the tests, check that they work, run the other
upgrade and encrypted install tests and check they still work
properly too.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D922
Summary:
as a new, non-fatal test step in the cockpit enrolment test,
because it kinda fits in there; we have an enrolled system with
a web browser *right there*. This will require making the wiki
reporting stuff slightly cleverer so we can say 'report a pass
for this wiki test instance if this test step passed', but that
should be possible. Making this non-fatal means the rest of the
cockpit enrolment test will go ahead even if the freeipa web UI
fails.
The 'check if we can log in' stuff is identical to freeipa_
client_postinstall except with different user names, so we could
potentially factor that out somehow, but I couldn't think of a
super clean way to do it so for now it's just copied.
Note this diff is on top of the freeipa-realmd branch which
is for D894, it's not on top of develop.
Test Plan:
Run the modified test and see if it works. No other
tests are modified, so they should be OK.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D895
now we're getting composes with the product name 'Fedora-Atomic'
this needle doesn't match them. Tweak it so it should match both
'Fedora' and 'Fedora-Atomic'.
Summary:
Set up the support server to provide DHCP/DNS functionality and
an NFS server, providing a kickstart. Add a kickstart test just
like the other root-user-crypted-net kickstart tests except it
gets the kickstart from the support server via NFS. Also add NFS
repository tests and a second support server for Server-dvd-iso
flavor: this test must run on that flavor to ensure that packages
are actually available. The support server just mounts the
attached 'DVD' and exports it via NFS.
Note we don't need to do anything clever to avoid IP conflicts
between the two support servers, because os-autoinst-openvswitch
ensures each worker group is on its own VLAN.
As part of adding the NFS repo tests, I did a bit of cleanup,
moving little things we were repeating a lot into anacondatest,
and sharing the 'check if the repo was used' logic between all
the tests (by making it into a test step that's loaded for all
of them). I also simplified the 'was repo used' checks a bit,
it seems silly to run a 'grep' command inside the VM then have
os-autoinst do a grep on the output (which is effectively what
we were doing before), instead we'll just use a single grep
within the VM, and clean up the messy quoting/escaping a bit.
Test Plan:
Run all tests - at least all repository tests - and
check they work (make sure the tests are actually still sane,
not just that they pass). I've done runs of all the repo tests
and they look good to me, but please double-check. I'm currently
re-running the whole 24-20160609.n.0 test on staging with these
changes.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
Summary:
this is following a SUSE model for tests where we need a server
end but don't want setting up the server to constitute a real
test in itself, we want it to be stable. The 'support_server'
test just boots a pre-built (by createhdds) disk image, sets up
networking, and runs the iSCSI server.
To run the iSCSI test we need to handle networking config in
anaconda (or we would need to set the support server up as a
DHCP server, which may be worth considering), so this adds that.
We also need to be able to specify the target device for a
volume in custom partitioning, so this adds that too.
Test Plan:
Build the necessary support server disk image (use
D883), then run the test and make sure it works. Also make sure
all other tests continue to work.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D884
Summary:
This requires a few other changes:
* turn clone_host_resolv into clone_host_file, letting you clone
any given host file (cloning /etc/hosts seems to make both
server deployment and client enrolment faster/more reliable)
* allow loading of multiple POSTINSTALL tests (so we can share
the freeipa_client_postinstall test). Note this is compatible,
existing uses will work fine
* move initial password change for the IPA test users into the
server deployment test (so the client tests don't conflict over
doing that)
* add GRUB_POSTINSTALL, for specifying boot parameters for boot of
the installed system, and make it work by tweaking _console_wait
_login (doesn't work for _graphical_wait_login yet, as I didn't
need that)
* make the static networking config for tap tests into a library
function so the tests can share it
* handle ABRT problem dirs showing up in /var/spool/abrt as well
as /var/tmp/abrt (because the enrol attempt hits #1330766 and
the crash report shows up in /var/spool/abrt, don't ask me why
the difference, I just work here)
* specify the DNS servers from the worker host's resolv.conf as
the forwarders for the FreeIPA server when deploying it; if we
don't do this, rolekit defaults to using the root servers as
forwarders(!) and thus we get the public, not phx2-appropriate,
results for e.g. mirrors.fedoraproject.org, some of which the
workers can't reach, so PackageKit package install always fails
(boy, was it fun figuring THAT mess out)
Even after all that, the test still doesn't actually pass, but
I'm reasonably confident this is because it's hitting actual bugs,
not because it's broken. It runs into #1330766 nearly every time
(I think I saw *one* time the enrolment actually succeeded), and
seems to run into a subsequent bug I hadn't seen before when
trying to work around that by trying the join again (see
https://bugzilla.redhat.com/show_bug.cgi?id=1330766#c37 ).
Test Plan:
Run the test, see what happens. If you're really lucky,
it'll actually pass. But you'll probably run into #1330766#c37,
I'm mostly posting for comment. You'll need a tap-capable openQA
instance to test this.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D880
