Commit Graph

50 Commits

Author SHA1 Message Date
Adam Williamson
8273d584e6 yay more fking magic sleeps
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-06-25 10:31:53 -07:00
Adam Williamson
861ad5d4aa Load us layout before doing post-install aarch64 cmdline hack
It seems that for some reason the localized layout gets loaded
on the installer VTs by this point in time, so we need to load
'us' again for this complex command to work.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-06-25 09:35:56 -07:00
Adam Williamson
05c9f4fbcd Make sure all check_screen calls have explicit timeout
Upstream is gonna change the default from 30 to 0, it seems:
https://github.com/os-autoinst/os-autoinst/pull/965
so let's go ahead and change these two cases where we have no
explicit timeout to have one.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-05-24 14:17:24 -07:00
Adam Williamson
33ac181955 Use mirrorlist instead of baseurl for updates tests
The reason we have all this horrible code to use the commented-
out baseurl lines in the repo files instead of the metalinks
that are usually used is a timing issue with the metalink
system. As a protection against stale mirrors, the metalink
system sends the package manager a list of mirrors *and a list
of recent checksums for the repo metadata*. The package manager
goes out and gets the metadata from the first mirror on the
list, then checksums it; if the checksum isn't on the list of
checksums it got from mirrormanager, it assumes that means the
mirror is stale, and tries the next on the list instead.

The problem is that MM's list of checksums is currently only
updated once an hour (by a cron job). So we kept running into
a problem where, when a test ran just after one of the repos
had been regenerated, the infra mirror it's supposed to use
would be rejected because the checksum wasn't on the list - but
not because the mirror was stale, but because it was too fresh,
it had got the new packages and metadata but mirrormanager's
list of checksums hadn't been updated to include the checksum
for the latest metadata.

All this baseurl munging code was getting ridiculous, though,
what with the tests getting more complicated and errors showing
up in the actual repo files and stuff. It occurred to me that
instead of using the baseurl we can just use the 'mirrorlist'
system instead of 'metalink'. mirrorlist is the dumber, older
system which just provides the package manager a list of mirrors
and nothing else - the whole stale-mirror-detection-checksum
thing does not happen with mirrorlists, the package manager just
tries all the mirrors in order and uses the first that works.
And happily, it's very easy to convert the metalink URLs into
mirrorlist URLs, and it saves all that faffing around trying to
fix up baseurls.

Also, adjust upgrade_boot to do the s/metalink/mirrorlist/
substitution, so upgrade tests don't run into the timing issue
in the steps before the main repo_setup run is done by
upgrade_run, and adjust repo_setup_compose to sub this line out
later.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-05-18 16:41:13 -07:00
Adam Williamson
452140fdbb Re-arrange the repo fixups to be a bit clearer and more correct
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-05-03 11:51:50 -07:00
Adam Williamson
7912648e5b Escape the $ in previous commit, tweak repo debugging bits
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-05-03 11:28:30 -07:00
Adam Williamson
6089ec6c55 More repo baseurl munging, for update upgrade tests to F28 now
Now F28 went stable, we're not disabling updates on upgrade any
more, and this bug got exposed: the location of the updates and
updates-testing repos actually changed between F27 and F28, so
the `baseurl` line from fedora-repos in F27 isn't correct for
F28. When doing an upgrade from < 28 to > 27, we need to correct
the URL when we're done installing stuff from the old release
repos but before we start trying to pull stuff from the new
release repos.

This repo munging crap is really getting fragile, it'd be great
if we could get that metadata timing issue resolved so we could
reliably use mirrormanager...

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-05-03 10:06:58 -07:00
Adam Williamson
6b62cb87ed Another fix for the repo fix...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-05-02 15:55:59 -07:00
Adam Williamson
c236fbcd21 Drop a stray # in previous commit, which made it not work
This is from my local test, sigh.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-05-02 15:48:24 -07:00
Adam Williamson
cef45346b6 Try to fix up some errors in fedora-repos baseurls in F28
This is breaking all f28 update tests, sigh.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-05-02 15:35:50 -07:00
Adam Williamson
cec1da9372 Remove bodhi-client 0.9 support in repo_setup_updates
...don't need it any more, F25 went EOL ages ago.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-05-02 15:08:34 -07:00
Adam Williamson
e931cfa0a5 Test FreeIPA upgrade on updates
This adds the FreeIPA server and client upgrade tests to a new
updates-server-upgrade flavor which fedora_openqa will schedule
for updates. This way, we can test whether updates break
FreeIPA upgrades, which is a request the FreeIPA team made to
me. This has been deployed on staging for the last week or so
and appears to work fine.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-04-26 11:35:18 -07:00
Adam Williamson
7e8a3010bb Fix bracket matching in previous commit
Syntax checks? In a text editor? THAT'S CRAZY TALK

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-04-09 17:19:03 -07:00
Adam Williamson
51b46bab7b g-i-s suppression change now applies to FAW 28+
Since gnome-initial-setup-3.28.0-5.fc28 , the g-i-s screens
that are supposed to be suppressed as part of
https://fedoraproject.org/wiki/Changes/ReduceInitialSetupRedundancy
are now suppressed on FAW installs as well as traditional ones.
So adjust the logic accordingly.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-04-09 16:50:16 -07:00
Adam Williamson
89bdea410f Rejig how we count the g-i-s screens we'll encounter
Trying to keep track of what these magic numbers mean is really
getting messy, so let's do it a bit more explicitly, using the
page names g-i-s uses internally, and lots of comments. This
should make it clearer and more maintainable when stuff changes.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-03-29 19:06:51 -07:00
Adam Williamson
75d1b80db7 Bump a magic timeout a bit for aarch64
aarch64 managed to hit the problem this 'magic timeout' tries
to avoid, so let's extend it :(

e.g. https://openqa.stg.fedoraproject.org/tests/267174

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-03-27 11:45:22 -07:00
Adam Williamson
81540165e8 Adjust repo_setup for add-on Modularity
I believe this should do all the right repo modifications for
add-on Modularity (i.e. F28+ Server installs, for now).

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-03-26 13:27:31 -07:00
Adam Williamson
2c26ce1ede Simply repo_setup by removing MODULAR bit
We don't need all the MODULAR stuff any more as we no longer do
oldModularity composes like that.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-03-26 12:56:10 -07:00
Adam Williamson
e685f00bd0 More tweaking for UEFI boot params on aarch64
Seems we're dealing with a bug, here.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-03-20 15:07:02 -07:00
Adam Williamson
20c361999b Fix post-install bootloader args on aarch64
Seems aarch64 needs 12 'down' key presses like ppc64, not 13
like x86_64. Tweak how this is done a bit; the ternary wasn't
elegant any more with the aarch64 change, so just get rid of it.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-03-20 14:05:00 -07:00
Adam Williamson
d162e4df16 Disable 'updates' repo for Branched update tests
This works around RHBZ #1552814, and it's not incorrect really
because the repo is always empty for Branched. I didn't do it
before because we might theoretically start using the repo for
Branched at some point in the future, and if we did that we'd
probably want it enabled for this test. But to get F28 update
tests working, let's just turn it off for now.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-03-10 11:01:35 -08:00
Adam Williamson
f1913e8305 Change g-i-s 'nexts' count for F28+
Several screens are now skipped in g-i-s pre-login mode, we
have to adjust the number we expect.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-03-09 18:37:01 -08:00
Michel Normand
18602d72f3 Change baseurl for PowerPC repo as "fedora-secondary"
in _repo_setup_updates function

Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
2017-11-28 08:18:16 +01:00
Adam Williamson
2a7b2923f7 Handle BGO#790811 (GNOME 'getting started' crash)
There's a bug causing the 'getting started' screen to crash.
This doesn't really make the system unusable, so treating it
as a soft failure seems appropriate, especially as this will
unblock all the post-install tests on Workstation.
2017-11-24 16:36:31 -08:00
Adam Williamson
da7eed3be6 Handle unbranded Cockpit login screen, record soft failure
There's a bug in current Modular Server which results in Cockpit
having an unbranded login screen, let's handle this but record
it as a soft failure.
2017-11-07 16:01:07 -08:00
Adam Williamson
442c143144 Try to fix quoting in printf 2017-11-07 15:00:08 -08:00
Adam Williamson
ce07c418d0 Fix (hackily) install of X, Firefox and haveged on Modular
Modular composes don't include these packages, but we need them
to run the web UI tests for FreeIPA and Cockpit. This is the
most reasonable hack I can come up with for now: just use a
non-modular fedora repo to source these packages when doing
Modular compose testing.

If we ever reach an all-Modular future, these packages should
be available in Modular composes I guess, but for now they are
not.
2017-11-07 14:20:36 -08:00
Adam Williamson
72395f1f67 Remove stray apostrophe in _repo_setup_compose 2017-11-06 17:42:30 -08:00
Adam Williamson
833502c880 Don't comment out metalink lines in repo files for modular
We can't easily do the 'point to the compose' fixup.
2017-11-06 16:20:40 -08:00
Adam Williamson
aaba51768e Don't use dnf config-manager on modular images
It's not there and can't be installed, at least at present.
2017-11-06 16:12:55 -08:00
Michel Normand
4610408963 Do not try to login if already done
the comment in console_login was already valid
but there was a missing return after test.

exemple of incorrect output is:
https://openqa.stg.fedoraproject.org/tests/182970#step/_collect_data/4

Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
2017-10-18 18:53:11 +02:00
Michel Normand
b1662c5f9d Add a 1s delay between each down key in do_bootloader
and call save_screenshot to visually check
for debug purpose only
Also change for PowerPC the number of down key to 12
(rather than 12)
Seems to be mandatory since 20170327.

Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
2017-09-06 08:43:04 +02:00
Michel Normand
6659e264b7 update repo_setup for PowerPC f25
to avoid upgrade_server test to fail with:
"Repository fedora-source has no mirror or baseurl set."

Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
2017-09-06 08:43:04 +02:00
Guy Menanteau
06839422e5 First PowerPC specific changes (not templates)
* New OFW variable to identify Open Firmware (used by PowerPC)
* Few needles changes for PowerPC support
* as requested do not change the timers value below for PowerPC
  tests/install_source_graphical.pm (300 to 600)
  tests/_boot_to_anaconda.pm (300 to 1200)
  This will be handled by TIMEOUT_SCALE in templates

Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
2017-09-06 08:43:04 +02:00
Adam Williamson
c2bb74c64d Explicitly install 'koji' package in update repo setup
bodhi-client doesn't depend on the 'koji' package but does need
it to do 'bodhi updates download', which we want to do. So we
must explicitly install it here.
2017-09-04 11:05:00 -07:00
Adam Williamson
b6c23ff4cf Hide cursor at start of prelogin gnome-initial-setup
For the same reason we do it at the start of GDM (recent mutter
dumps a mouse cursor in the middle of the screen on startup).
2017-09-02 16:16:54 -07:00
Adam Williamson
9b91c839a7 Treat failure to source bash profile as a soft fail
There's a bug in current Rawhide causing sourcing of /etc/bashrc
to fail when logging in as a regular user. This results in the
bash prompt looking different, which is currently a hard fail,
and causes most tests to die. It's better to treat this as a
soft fail so the rest of the test can run. So add a needle to
spot this case, and a little finish function the console login
function calls whenever it's successfully logged in, to check
whether it got the no-profile prompt and register a soft fail.
2017-09-02 12:49:56 -07:00
Adam Williamson
ad6186daf1 Use super not alt-f1 for the 'clean desktop' workaround
Using alt-f1 might cause problems if we do it while we're at a
TTY (it'll switch to TTY1, which may not be what we want).
2017-07-10 15:05:36 -07:00
Adam Williamson
aca7de2861 Change up 'clean desktop' check again (use a util function)
Well, that OCR needle isn't working out so great, as it seems
to match when it shouldn't:

https://openqa.fedoraproject.org/tests/119217#step/_graphical_wait_login/5

So let's try another approach. Ditch the OCR needle and have a
function for checking we're at a clean desktop. It does the
normal needle match, but if we're on GNOME, it also tries
hitting alt+f1 and seeing if we're at the overview; if so, it
hits alt+f1 again (to go back to the desktop) and returns.
2017-07-10 11:47:07 -07:00
Adam Williamson
654534e694 Work around RHBZ #1439429 when running Firefox on X 2017-04-05 18:22:09 -07:00
Adam Williamson
1444c5030b Add tests with no user created during install
Summary:
This adds a new test suite, run for Workstation and KDE live
images, which does not create a user during install. It then
expects initial-setup (KDE) or gnome-initial-setup (Workstation)
to appear after install, creates a user, and proceeds with
normal boot.

Note the ARM image test already covers the initial-setup text
mode, and the ARM minimal image is the only case where that
actually matters (it's not included in Server).

Test Plan:
Run the new tests, check they work. Run all old
tests, check the changes didn't break them.

Reviewers: jsedlak, jskladan

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1185
2017-04-05 09:43:26 -07:00
Adam Williamson
7977b41804 Give update download yet more time (we have some big updates) 2017-03-24 14:10:29 -07:00
Adam Williamson
e4a8929465 Delete openh264 repo definition during repo_setup
This repo is causing problems for Branched update tests. The
repo is not available for 26 at all yet. This shouldn't be a
problem as the repo is disabled by default, but it seems that
some things - at least realmd, as used in the FreeIPA enrolment
tests - still try to update the repo's metadata when installing
packages, and fail because it 404s.

Since none of our tests actually needs this repo AFAIK, let's
just delete it in repo_setup.
2017-03-15 10:02:25 -07:00
Adam Williamson
bb1be2f0b1 Disable updates-testing for updates tests on Branched 2017-03-13 14:49:27 -07:00
Adam Williamson
da01d15406 Fix repo setup for Branched update tests (I hope)
Branched update tests are all failing because the baseurl in
fedora.repo is incorrect for Branched. This is a rather hacky
fix for this problem. It relies on the scheduler setting the
DEVELOPMENT variable when the update is for Branched (I named
the variable DEVELOPMENT rather than BRANCHED to be more
future-proof).

Alternative options I rejected were:

i) stick with MM links
ii) do something 'clever' to retrieve the URLs from MM

Rejected i) because the timing problem where the infra repo gets
updated before MM has the updated repodata checksums is just too
much of a problem; whenever that happens, dnf will refuse to use
the metadata from the infra repo and go pull it from an external
mirror, which can wind up timing out.

Rejected ii) because it seemed too fancy and not really any more
robust than just doing this and adapting it if Things Change In
Future (TM).
2017-03-13 12:43:54 -07:00
Adam Williamson
8eea2a5d1f Bump the timeout on the initial 'dnf -y update' for update tests 2017-03-03 15:55:31 -08:00
Adam Williamson
461f3a6132 Update testing: log packages in update and installed packages
Summary:
This adds some logging related to the update testing workflow,
so we have some idea what we actually tested. We log precisely
which packages were actually downloaded from the update - this
is important as updates can be edited and when examining results
we'll want to know which packages actually got used. We also
add a new module which runs at the end of postinstall and tries
to figure out which packages from the update were installed in
the course of the test. This still isn't a guarantee the test
actually *tested them* in any way, but it at least means they
got installed successfully and didn't interfere with the test.

Test Plan:
Run the update test workflow, check the logs get
uploaded and seem accurate (sometimes some RPM garbage messages
wind up in the package log, I'm not too worried about that at
present). Run the compose test workflow and check it didn't
break.

Reviewers: jsedlak

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1149
2017-02-23 14:51:19 -08:00
Adam Williamson
92d588f245 Add support for testing updates
Summary:
This adds an entirely new workflow for testing distribution
updates. The `ADVISORY` variable is introduced: when set,
`main.pm` will load an early post-install test that sets up
a repository containing the packages from the specified update,
runs `dnf -y update`, and reboots. A new templates file is
added, `templates-updates`, which adds two new flavors called
`updates-server` and `updates-workstation`, each containing
job templates for appropriate post-install tests. Scheduler is
expected to post `ADVISORY=(update ID) HDD_1=(base image)
FLAVOR=updates-(server|workstation)`, where (base image) is one
of the stable release base disk images produced by `createhdds`
and usually used for upgrade testing. This will result in the
appropriate job templates being loaded.

We rejig postinstall test loading and static network config a
bit so that this works for both the 'compose' and 'updates' test
flows: we have to ensure we bring up networking for the tap
tests before we try and install the updates, but still allow
later adjustment of the configuration. We take advantage of the
openQA feature that was added a few months back to run the same
module multiple times, so the `_advisory_update` module can
reboot after installing the updates and the modules that take
care of bootloader, encryption and login get run again. This
looks slightly wacky in the web UI, though - it doesn't show the
later runs of each module.

We also use the recently added feature to specify `+HDD_1` in
the test suites which use a disk image uploaded by an earlier
post-install test, so the test suite value will take priority
over the value POSTed by the scheduler for those tests, and we
will use the uploaded disk image (and not the clean base image
POSTed by the scheduler) for those tests.

My intent here is to enhance the scheduler, adding a consumer
which listens out for critpath updates, and runs this test flow
for each one, then reports the results to ResultsDB where Bodhi
could query and display them. We could also add a list of other
packages to have one or both sets of update tests run on it, I
guess.

Test Plan:
Try a post something like:
HDD_1=disk_f25_server_3_x86_64.img DISTRI=fedora VERSION=25
FLAVOR=updates-server ARCH=x86_64 BUILD=FEDORA-2017-376ae2b92c
ADVISORY=FEDORA-2017-376ae2b92c CURRREL=25 PREVREL=24

Pick an appropriate `ADVISORY` (ideally, one containing some
packages which might actually be involved in the tests), and
matching `FLAVOR` and `HDD_1`. The appropriate tests should run,
a repo with the update packages should be created and enabled
(and dnf update run), and the tests should work properly. Also
test a regular compose run to make sure I didn't break anything.

Reviewers: jskladan, jsedlak

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1143
2017-02-22 11:33:32 -08:00
Adam Williamson
e5dc67126d Fix check_release, menu_launch_type, start_cockpit
I accidentally left the `my $self = shift` lines in these when
changing them from methods into functions, so they don't work
right at all. Whoops. Sorry.
2017-01-26 14:32:42 +01:00
Adam Williamson
b67f604894 Move all remaining utility functions into exporter modules
Summary:
This adds a couple of new exporter modules, renames main_common
to utils (this is a better name: openSUSE's main_common is
functions used in main.pm, utils is what they call their module
full of miscellaneous commonly-used functions), and moves a
bunch of utility functions that were previously needlessly
implemented as instance methods in base classes into the
exporter modules. That means we can get rid of all the annoying
$self-> syntax for calling them.

We get rid of `fedorabase` entirely, as it's no longer useful
for anything. Other base classes keep the 'standard' methods
(like `post_fail_hook`) and methods which actually need to be
methods (like `root_console`, whose behaviour is different in
anacondatest and installedtest).

Test Plan:
Do a full test suite run and check everything lines
up. There should be no functional differences from before at all,
this is just a re-org.

Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames

Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1080
2017-01-17 23:15:44 -08:00