Commit Graph

215 Commits

Author SHA1 Message Date
Michel Normand
9aa83cffd1 support nfsvers=x parameter as nfs option
Required to validate bypass for pending bug
https://bugzilla.redhat.com/show_bug.cgi?id=1386059

Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
2017-09-06 08:43:04 +02:00
Michel Normand
c086b3c0c1 rpcbind not same path for PowerPC
A temporary patch on top of workaround RHBZ #1402427
(I do not have access to it)

Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
2017-09-06 08:43:04 +02:00
Guy Menanteau
9c8a4949fa Modify "install_multi" test for PowerPC
PowerPC arches have the empty disk automatically
mounted on the second position in anaconda (vdb).
Thus, trig installation on second disk.
Change disk checking to point on correct disk.

Warning: this is a workaround specific correction
addressing a specific case.
This will have to be improved/changed with a more
generic code as suggested by Adam Williamson in
https://pagure.io/fedora-qa/os-autoinst-distri-fedora/pull-request/1#comment-31858
proposal for a next commit :)

Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
2017-09-06 08:43:04 +02:00
Guy Menanteau
06839422e5 First PowerPC specific changes (not templates)
* New OFW variable to identify Open Firmware (used by PowerPC)
* Few needles changes for PowerPC support
* as requested do not change the timers value below for PowerPC
  tests/install_source_graphical.pm (300 to 600)
  tests/_boot_to_anaconda.pm (300 to 1200)
  This will be handled by TIMEOUT_SCALE in templates

Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
2017-09-06 08:43:04 +02:00
Adam Williamson
004121a38d Upload all logs when AVCs and/or crashes detected
Previously we just got a screenshot of some AVCs or coredumps,
which told us something was wrong but didn't really help debug
it. So, let's upload the output of the commands and then also
use the post-fail hook to upload the system logs, which should
give us much more info to work with.
2017-09-05 09:35:59 -07:00
Adam Williamson
60913a20e0 Always upload logs at end of domain_controller test
We often want to see the logs from the FreeIPA deployment test
even if that test passes - to look for some detail that doesn't
cause a test to fail, for instance, or if one of the *client*
tests failed for a reason that involves the server. So, let's
do that.
2017-09-05 09:32:33 -07:00
Michel Normand
53f0acea50 Add allowerasing for upgrade if failed without it
Note:
The dnf.log and dnf.rpm.log are already uploaded
to help for investigation.

Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
2017-09-05 13:38:14 +02:00
Adam Williamson
a7a6219276 Re-confirm passphrase when working around #1444225
When we hit #1444225, as well as hitting Done a second time, we
have to confirm the passphrase again to work around it.
2017-07-26 15:05:55 -07:00
Adam Williamson
81ebcd882c Install libglvnd-egl when installing base-x, X seems to need it
On Rawhide, X fails to start unless this is installed. Should
probably be in the base-x group, I'll file a bug or add it.
2017-07-24 18:58:31 -07:00
Adam Williamson
6443d364b9 Fix a typo in the RHBZ#1444225 workaround 2017-07-10 15:15:41 -07:00
Adam Williamson
9a7d51f841 Tweak _graphical_input to work with transparent top bar
At least, I hope this will work.
2017-07-10 14:41:57 -07:00
Adam Williamson
e61cfa699c Try a different workaround for RHBZ #1444225
That other one didn't help, so let's try this - try and spot if
the spoke is in the unexpected state (the needle should only
match if the spoke is done processing and still in warning
state, it shouldn't match while the needle is still thinking)
and click through it again if so.
2017-07-10 12:24:41 -07:00
Adam Williamson
aca7de2861 Change up 'clean desktop' check again (use a util function)
Well, that OCR needle isn't working out so great, as it seems
to match when it shouldn't:

https://openqa.fedoraproject.org/tests/119217#step/_graphical_wait_login/5

So let's try another approach. Ditch the OCR needle and have a
function for checking we're at a clean desktop. It does the
normal needle match, but if we're on GNOME, it also tries
hitting alt+f1 and seeing if we're at the overview; if so, it
hits alt+f1 again (to go back to the desktop) and returns.
2017-07-10 11:47:07 -07:00
Adam Williamson
ddb6f8e416 Adjust cockpit log needles for Rawhide change
The Logs screen changed a bit. Also, it seems wrong to have
'notices' in all these needle names, so let's fix that.
2017-07-10 10:35:27 -07:00
Adam Williamson
d119e1e53e Check for NFS repo message in anaconda.log too
It seems to have moved there in F27.
2017-07-10 10:21:57 -07:00
Adam Williamson
ee2a3daefd Try to work around #1444225 with a sleep in disk_guided_empty
IIRC disk_guided_empty is the only storage test that clicks
through INSTALLATION DESTINATION *really* fast, so let's try
adding a 2-second sleep to it to see if it works around the
'sometimes spoke shows as incomplete' bug that cropped up in
F26 and hasn't been fixed yet and tends to cause failures.
2017-07-06 13:15:20 -07:00
Adam Williamson
09c264fe16 Add Workstation dvd-ostree flavor and tests
Summary:
As we're getting the Workstation dvd-ostree (OStree installer
image) built for Rawhide now, let's try testing it.

Test Plan:
Run the tests on a Rawhide compose that works and
has the image (e.g. 20170615.n.0). Check that new tests work
as expected and old tests are not adversely affected. A
corresponding diff for fedora_openqa will be coming to take
care of scheduling. Note that the tests will often soft fail
for now; this is intentional due to RHBZ#1193590, the bash
prompt for root is incorrect on ostree installs, so I have
added a needle that matches the incorrect prompt but which is
flagged as a workaround needle (so causing the test result to
be a soft fail).

Reviewers: jsedlak, jskladan

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1211
2017-06-26 18:48:27 -07:00
Adam Williamson
a29875a2ff Upgrade tests: Run FreeIPA webUI and password change modules
Summary:
This just adds the FreeIPA web UI and password change
test modules to the FreeIPA upgrade test (client end). It's
useful to check out these features too. We don't need to
separate these into separate jobs, as we're not trying to
fill out different matrix checkboxes here, we just want to
know whether everything works.

Test Plan:
Run the test, see that the modules work properly.
I was actually expecting this to fail given the issues with
the upgrade on the server end, but it seems to pass.

Reviewers: jsedlak, jskladan

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1207
2017-06-13 10:06:15 -07:00
Adam Williamson
25b910135b Workaround cursor showing up on GDM in desktop_notifications 2017-06-06 18:16:52 -07:00
Adam Williamson
df2c3cd906 Test upgrade of FreeIPA server and client deployment
Summary:
This adds an upgrade variant of the FreeIPA tests, with only
the simplest client enrolment (sssd) for now. The server test
starts from the N-1 release and deploys the domain controller
role. The client test similarly starts from the N-1 release
and, when the server is deployed, enrols as a domain client.
Then the server upgrades itself, while the client waits (as the
server is its name server). Then the client upgrades itself,
while the server does some self-checks. The server then waits
for the client to do its checks before decommissioning itself,
as usual. So, summary: *deployment* of both server and client
occurs on N-1, then both are upgraded, then the actual *checks*
occur on N.

In my testing, this all more or less works, except the role
decommission step fails. This failure seems to be a genuine one
so far as I can tell; I intend to file a bug for it soon.

Test Plan:
Run the new tests, check they work. Run the existing
FreeIPA tests (both the compose and the update variants), check
they both behave the same.

Reviewers: jsedlak, jskladan

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1204
2017-06-02 12:17:07 -07:00
Jan Sedlák
48b99a2291 add base system logging test
Differential Revision: https://phab.qa.fedoraproject.org/D1202
2017-06-01 11:06:04 +02:00
Jan Sedlák
4114406668 add UEFI for blivet tests
Differential Revision: https://phab.qa.fedoraproject.org/D1201
2017-05-22 09:26:58 +02:00
Jan Sedlák
0b5f865c8f add custom btrfs partitioning test for blivet-gui
Differential Revision: https://phab.qa.fedoraproject.org/D1194
2017-05-19 13:58:16 +02:00
Jan Sedlák
ea5296b306 add postinstalls to custom partitioning tests
Differential Revision: https://phab.qa.fedoraproject.org/D1192
2017-05-09 09:11:34 +02:00
Adam Williamson
c2b1ea4e8c Use test3 not test1 for FreeIPA password change test module
Previously this module changed test1's password, so that it
would still be able to work even if the webui test module
failed (so test3/test4 didn't get created). But this means
that, for about 30 seconds, test1's password is 'loremipsum'
not 'batterystaple', and if one of the *other* client test
jobs happens to hit a point where it has to auth as test1
during the 30 seconds test1's password is different, it will
fail. This looks to be what happened to the join_kickstart
test the last few days - it failed because it tried to login
as test1 during the password change window.

By using the test3 user instead (which is only used by the
join_cockpit test, currently) we avoid this problem, at the
cost that the password_change module will always fail if the
webui module fails.
2017-05-04 17:29:35 -07:00
Adam Williamson
7d07147b7e Work around F26 base image bug: g-i-s failing to run
With the latest F26 base images, it seems like g-i-s fails to
run at first login. This is clearly some kind of bug somewhere
and I'll investigate it, but it shouldn't be causing the update
tests to fail - we can still validly run the tests with g-i-s
not running. So for now, adjust the _graphical_wait_login test
to tolerate this behaviour when running update tests.
2017-04-24 18:49:25 -07:00
Jan Sedlák
140c5f0a42 Add custom partitioning tests for blivet
Differential Revision: https://phab.qa.fedoraproject.org/D1188
2017-04-24 14:23:35 +02:00
Adam Williamson
e6076e14b8 Workaround issues with loading same module more than once
Summary:
Loading the same module more than once *kinda* works, but it
shows up all kinds of funky in the openQA web interface. There's
a POO for this:
https://progress.opensuse.org/issues/10514
But it doesn't seem like it's going to be resolved immediately,
so in the mean time maybe we should avoid doing it so we don't
have to deal with the weirdness it produces in the web UI. So
here's a kinda icky hack that uses symlinks and stuff to load
multiple instances of 'the same' test module.

Test Plan:
Run an update test, look at how it looks in the web
UI and confirm it's a lot clearer and less buggy. Check there
aren't any bugs in the loading approach. This is deployed on stg
so you can look at it there.

Reviewers: jsedlak, jskladan

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1186
2017-04-18 10:38:16 -07:00
Adam Williamson
9da72de4ed Hide mouse on login screen (BGO #781294)
GDM 3.24.1 dumps a cursor in the middle of the login screen even
if you didn't move the mouse yet, so let's workaround that.
2017-04-13 15:28:37 -07:00
Adam Williamson
ee283b1411 Tweak _console_avc_crash so we get soft failures
We do want soft failures (but not hard) when _console_avc_crash
fails. So let's tweak it to ensure that's what happens.
2017-04-10 15:44:13 -07:00
Adam Williamson
e68e113f76 Remove test_flags comments, add ignore_failure flag
It's not really a good idea to have the comments that explain
the test_flags in *every* test, because they can go stale and
then we either have to live with them being old or update them
all. Like, now. So let's just take 'em all out. There's always
a reference in the openQA and os-autoinst docs, and those get
updated faster.

More importantly, add the new `ignore_failure` flag to relevant
tests - all the tests that don't have the 'important' or
'fatal' flag at present. Upstream killed the 'important' flag
(making all tests 'important' by default), I got it replaced
with the 'ignore_failure' flag, we now need to explicitly mark
all modules we want the 'ignore_failure' behaviour for.
2017-04-10 15:00:10 -07:00
Adam Williamson
5b4ce80487 Tweak needle matches at start of _do_install_and_reboot
The way this was set up before, if `anaconda_main_hub` matched
immediately but some spoke was still in a 'processing' state,
it only had 30 seconds (default `assert_and_click` timeout) to
complete and allow the 'Begin Installation' button to appear.
It seems unnecessary to match on *both* needles, really, so
let's just give 300 seconds for the `begin_installation` needle
to appear. It's not going to appear on any other screen.

This problem caused a couple of spurious failures today -
https://openqa.fedoraproject.org/tests/77839 and
https://openqa.fedoraproject.org/tests/77858 - because they
took a bit too long for the INSTALLATION DESTINATION spoke to
clear.
2017-04-07 11:31:34 -07:00
Adam Williamson
1444c5030b Add tests with no user created during install
Summary:
This adds a new test suite, run for Workstation and KDE live
images, which does not create a user during install. It then
expects initial-setup (KDE) or gnome-initial-setup (Workstation)
to appear after install, creates a user, and proceeds with
normal boot.

Note the ARM image test already covers the initial-setup text
mode, and the ARM minimal image is the only case where that
actually matters (it's not included in Server).

Test Plan:
Run the new tests, check they work. Run all old
tests, check the changes didn't break them.

Reviewers: jsedlak, jskladan

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1185
2017-04-05 09:43:26 -07:00
Adam Williamson
4ea5129312 Goddamnit, perl, and your goddamn brackets 2017-03-29 15:09:25 -07:00
Adam Williamson
4f014d4f11 Use tty2 not tty3 for freeipa_client login tests
There's an issue where the follow-on _advisory_post test tries
to log in before the 'login failed' error has cleared. We can
easily avoid this by using tty2 for the login tests, then
_advisory_post will switch to tty3 for its stuff.
2017-03-29 14:33:25 -07:00
Adam Williamson
b6d4fd7d4c Don't create user when USER_LOGIN is false, but for KDE install
Summary:
For some reason, we have `USER_LOGIN` set to 'false' for the KDE
package set install test. I really don't know / remember why
that would be; I'd think we should create a user and log in as
that user to make sure it works properly when installing KDE
from the traditional installer. It's not strictly part of the
package set test, true, but still, seems worth doing.

Also, when `USER_LOGIN` is set to 'false' and the installer runs,
we create a user called 'false'. This doesn't seem like what we
wanted, so let's not do that. I dunno if there are any other
cases besides the KDE one that this commit changes, but still.

Test Plan:
Run the full test suite and look for weirdness, check
KDE package set test works as intended (now creates a user called
'test' and logs in as that user).

Reviewers: jsedlak, jskladan

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1182
2017-03-29 09:30:16 -07:00
Adam Williamson
cc2d53b4ed Wait a bit after input switch before doing Japanese typing 2017-03-20 11:32:50 -07:00
Adam Williamson
ba3a5152c1 Improve FreeIPA debug logging a bit
Committing without review as this is pretty trivial and I've
had it on staging for the last few days without issue. Just gets
us somewhat better info for debugging FreeIPA issues.
2017-03-16 12:36:33 -07:00
Adam Williamson
1b26f7c04c Add missing 'use utils' to disk_guided_encrypted_postinstall 2017-03-09 13:57:06 -08:00
Adam Williamson
a581d20f8e Desktop update: Wait before clicking update apply button
We used to do this only for KDE, but I've seen the new update
tests sometimes fail at this point for no apparent reason, and
I'm thinking a wait may help (in case they're clicking the
button before it's really 'ready').
2017-03-02 15:33:23 -08:00
Adam Williamson
8d55935b41 Bump up the ARM boot timeout
Let's see if it can get a bit further, at least...
2017-03-02 15:16:02 -08:00
Adam Williamson
e9fda18016 Explicit timeout for the 'top' in _collect_data
This keeps failing because the default `assert_script_run`
timeout changed from 90 to 30 in the last os-autoinst update
(an unintended consequence of a change I made). This has been
fixed upstream, but in the mean time, let's just set an
explicit timeout on the call.
2017-03-02 14:47:44 -08:00
Adam Williamson
602a1ee101 Call boot_decrypt properly (function not method)
Noticed in e.g. https://openqa.fedoraproject.org/tests/58798
we're doing this wrong, `boot_decrypt` was moved into utils as
a function, but we were still calling it as a method...
2017-03-02 14:32:17 -08:00
Adam Williamson
9aed11a77b Work around RHBZ #1400293 (breaks IPA tests on Fedora 24) 2017-02-28 11:46:21 -08:00
Adam Williamson
461f3a6132 Update testing: log packages in update and installed packages
Summary:
This adds some logging related to the update testing workflow,
so we have some idea what we actually tested. We log precisely
which packages were actually downloaded from the update - this
is important as updates can be edited and when examining results
we'll want to know which packages actually got used. We also
add a new module which runs at the end of postinstall and tries
to figure out which packages from the update were installed in
the course of the test. This still isn't a guarantee the test
actually *tested them* in any way, but it at least means they
got installed successfully and didn't interfere with the test.

Test Plan:
Run the update test workflow, check the logs get
uploaded and seem accurate (sometimes some RPM garbage messages
wind up in the package log, I'm not too worried about that at
present). Run the compose test workflow and check it didn't
break.

Reviewers: jsedlak

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1149
2017-02-23 14:51:19 -08:00
Adam Williamson
92d588f245 Add support for testing updates
Summary:
This adds an entirely new workflow for testing distribution
updates. The `ADVISORY` variable is introduced: when set,
`main.pm` will load an early post-install test that sets up
a repository containing the packages from the specified update,
runs `dnf -y update`, and reboots. A new templates file is
added, `templates-updates`, which adds two new flavors called
`updates-server` and `updates-workstation`, each containing
job templates for appropriate post-install tests. Scheduler is
expected to post `ADVISORY=(update ID) HDD_1=(base image)
FLAVOR=updates-(server|workstation)`, where (base image) is one
of the stable release base disk images produced by `createhdds`
and usually used for upgrade testing. This will result in the
appropriate job templates being loaded.

We rejig postinstall test loading and static network config a
bit so that this works for both the 'compose' and 'updates' test
flows: we have to ensure we bring up networking for the tap
tests before we try and install the updates, but still allow
later adjustment of the configuration. We take advantage of the
openQA feature that was added a few months back to run the same
module multiple times, so the `_advisory_update` module can
reboot after installing the updates and the modules that take
care of bootloader, encryption and login get run again. This
looks slightly wacky in the web UI, though - it doesn't show the
later runs of each module.

We also use the recently added feature to specify `+HDD_1` in
the test suites which use a disk image uploaded by an earlier
post-install test, so the test suite value will take priority
over the value POSTed by the scheduler for those tests, and we
will use the uploaded disk image (and not the clean base image
POSTed by the scheduler) for those tests.

My intent here is to enhance the scheduler, adding a consumer
which listens out for critpath updates, and runs this test flow
for each one, then reports the results to ResultsDB where Bodhi
could query and display them. We could also add a list of other
packages to have one or both sets of update tests run on it, I
guess.

Test Plan:
Try a post something like:
HDD_1=disk_f25_server_3_x86_64.img DISTRI=fedora VERSION=25
FLAVOR=updates-server ARCH=x86_64 BUILD=FEDORA-2017-376ae2b92c
ADVISORY=FEDORA-2017-376ae2b92c CURRREL=25 PREVREL=24

Pick an appropriate `ADVISORY` (ideally, one containing some
packages which might actually be involved in the tests), and
matching `FLAVOR` and `HDD_1`. The appropriate tests should run,
a repo with the update packages should be created and enabled
(and dnf update run), and the tests should work properly. Also
test a regular compose run to make sure I didn't break anything.

Reviewers: jskladan, jsedlak

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1143
2017-02-22 11:33:32 -08:00
Adam Williamson
186678e98b Make log upload work when installed system hits emergency mode
Summary:
This is to handle cases like #1414904 , where the system boots
to emergency mode. We really need logs to try and debug this.

Test Plan:
Force a test to hit emergency mode somehow (right now
you can just run base_services_start on Rawhide over and over
until you hit #1414904, but there's probably an easier way to
do it, I think there's a systemd boot arg to tell it which target
to boot for e.g.) and check logs get uploaded. Also check this
doesn't break log upload for a 'normal' failure.

Reviewers: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames

Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1103
2017-02-01 12:30:21 +01:00
Adam Williamson
b67f604894 Move all remaining utility functions into exporter modules
Summary:
This adds a couple of new exporter modules, renames main_common
to utils (this is a better name: openSUSE's main_common is
functions used in main.pm, utils is what they call their module
full of miscellaneous commonly-used functions), and moves a
bunch of utility functions that were previously needlessly
implemented as instance methods in base classes into the
exporter modules. That means we can get rid of all the annoying
$self-> syntax for calling them.

We get rid of `fedorabase` entirely, as it's no longer useful
for anything. Other base classes keep the 'standard' methods
(like `post_fail_hook`) and methods which actually need to be
methods (like `root_console`, whose behaviour is different in
anacondatest and installedtest).

Test Plan:
Do a full test suite run and check everything lines
up. There should be no functional differences from before at all,
this is just a re-org.

Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames

Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1080
2017-01-17 23:15:44 -08:00
Adam Williamson
a091185af1 Handle 'non-ASCII in password' warning for Russian installs
Summary:
Since 26.17, anaconda shows a warning when the user password
contains non-ASCII characters, and requires a second Done click
to confirm. This change should handle that.

On the 'catch cases where password typing went wrong and re-try'
bit: to keep that, but not re-type the password *every single
time* on the Russian install test, we'd have to make the needle
match the text of the warning. This is problematic because then
that needle will be able to break without us easily noticing;
that's why I wanted to keep the 'warning bar' needle text-free.
Unfortunately, that means we have to skip the protection for
switched-layout installs.

Note the protection was actually not working for any non-English
install anyhow, because the needle had `LANGUAGE-english` as a
tag. We never noticed that. Failed password typing is pretty
rare now, so we can live without the protection - it's just nice
to have it for the English install tests because there's so many
of them.

Test Plan:
Run the Russian install with a recent Rawhide image,
check it clicks 'Done' twice. Note, it will still fail, because
of RHBZ #1413813.

Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames

Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1084
2017-01-17 23:13:47 -08:00
Adam Williamson
062d9f8f5e Add jobs to gather memory usage data
Summary:
This adds a new test, memory_check, which just does a default
package set install with `inst.debug` parameter then uploads
the memory usage file (`/tmp/memory.dat`) at the end. We can
have check-compose use the data to analyze changes in memory
usage over time.

Test Plan:
Fire off the Workstation network install image tests
and make sure the memory usage test runs and works on all three
machines. This is live on staging already.

Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames

Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1082
2017-01-16 09:30:14 -08:00