Seems on x86_64 the text cursor is at the left of the text entry
box, but on aarch64 it's at the right. I have no idea why.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It seems that for some reason the localized layout gets loaded
on the installer VTs by this point in time, so we need to load
'us' again for this complex command to work.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We need this as part of the fix for #1593028, at least until
the kernel package is changed to no longer have
CONFIG_CMDLINE="console=ttyAMA0" in the config for aarch64
builds. Fully fixing the bug also requires some change to the
kernel or dracut or something.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sometimes on aarch64 clicking the partition scheme drop-down
just doesn't seem to make the menu appear, instead the button
goes active but that's all. It's very unlikely we'll be able
to track down why as this doesn't happen in manual testing on
aarch64 (according to @pwhalen), so instead let's just work
around it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These all are caused by a new desktop background and bits of
KDE desktop chrome apparently becoming translucent.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The way this currently works, the test unconditionally waits 60
seconds for the "Timbuktu screen" (the warning dialog shown on
pre-release images) to appear when anaconda is starting up, even
if it's testing an image where it doesn't show up. Now we test
Atomic nightlies and live respins and stuff this happens quite a
lot, so let's avoid it. This way if the hub appears during those
60 seconds we'll spot it right away and continue, otherwise we
behave the same as before.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Upstream is gonna change the default from 30 to 0, it seems:
https://github.com/os-autoinst/os-autoinst/pull/965
so let's go ahead and change these two cases where we have no
explicit timeout to have one.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The reason we have all this horrible code to use the commented-
out baseurl lines in the repo files instead of the metalinks
that are usually used is a timing issue with the metalink
system. As a protection against stale mirrors, the metalink
system sends the package manager a list of mirrors *and a list
of recent checksums for the repo metadata*. The package manager
goes out and gets the metadata from the first mirror on the
list, then checksums it; if the checksum isn't on the list of
checksums it got from mirrormanager, it assumes that means the
mirror is stale, and tries the next on the list instead.
The problem is that MM's list of checksums is currently only
updated once an hour (by a cron job). So we kept running into
a problem where, when a test ran just after one of the repos
had been regenerated, the infra mirror it's supposed to use
would be rejected because the checksum wasn't on the list - but
not because the mirror was stale, but because it was too fresh,
it had got the new packages and metadata but mirrormanager's
list of checksums hadn't been updated to include the checksum
for the latest metadata.
All this baseurl munging code was getting ridiculous, though,
what with the tests getting more complicated and errors showing
up in the actual repo files and stuff. It occurred to me that
instead of using the baseurl we can just use the 'mirrorlist'
system instead of 'metalink'. mirrorlist is the dumber, older
system which just provides the package manager a list of mirrors
and nothing else - the whole stale-mirror-detection-checksum
thing does not happen with mirrorlists, the package manager just
tries all the mirrors in order and uses the first that works.
And happily, it's very easy to convert the metalink URLs into
mirrorlist URLs, and it saves all that faffing around trying to
fix up baseurls.
Also, adjust upgrade_boot to do the s/metalink/mirrorlist/
substitution, so upgrade tests don't run into the timing issue
in the steps before the main repo_setup run is done by
upgrade_run, and adjust repo_setup_compose to sub this line out
later.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The background is now blue for ppc64le, so add related needles as bypass.
no such problem with ppc64 (BE)
problem initially detected on Rawhide compose 20180204
but still present on f28 compose 20180302
and Rawhide compose 20180513
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1403365 has been
around approximately forever and I still haven't managed to
debug it; let's just make needles for it, as it's not really a
critical bug, the system still *works*.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
For quite a while on i386 the 'enter passphrase' console screen
has used bright white text, for some reason. Let's just have a
variant needle for this instead of worrying too hard about why.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sometimes rebooting during upgrade tests seems to take longer
than these timeouts allow, so let's bump them a bit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The text changed from 'added repo' to 'enabled repo' in Rawhide
after F28, so let's handle both at least till F28 is EOL.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
...to try and avoid running into RHBZ#1572916, which is killing
Rawhide tests it seems. Let's hope this doesn't result in host
entropy starvation. If it does I might try patching os-autoinst
to seed virtio-rng from /dev/urandom, not /dev/random...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Now F28 went stable, we're not disabling updates on upgrade any
more, and this bug got exposed: the location of the updates and
updates-testing repos actually changed between F27 and F28, so
the `baseurl` line from fedora-repos in F27 isn't correct for
F28. When doing an upgrade from < 28 to > 27, we need to correct
the URL when we're done installing stuff from the old release
repos but before we start trying to pull stuff from the new
release repos.
This repo munging crap is really getting fragile, it'd be great
if we could get that metadata timing issue resolved so we could
reliably use mirrormanager...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Since we set up this whole process to run upgrade tests for
updates to run the FreeIPA ones on the Server base image, it
should be easy to also run Workstation upgrade tests on the
Workstation base image. So let's do that! Let's do the most
complex test only, the encrypted upgrade one.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds the FreeIPA server and client upgrade tests to a new
updates-server-upgrade flavor which fedora_openqa will schedule
for updates. This way, we can test whether updates break
FreeIPA upgrades, which is a request the FreeIPA team made to
me. This has been deployed on staging for the last week or so
and appears to work fine.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We've been seeing an odd case lately where the language select
screen is not foregrounded when it appears (so all text is
grey). It happens very occasionally on x86_64, but a lot on
ppc64. To work around this, let's add a needle that matches the
inactive screen, and click on the screen when it appears just
to make sure it's active.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
