os-autoinst-distri-rocky/main.pm
Adam Williamson 461f3a6132 Update testing: log packages in update and installed packages
Summary:
This adds some logging related to the update testing workflow,
so we have some idea what we actually tested. We log precisely
which packages were actually downloaded from the update - this
is important as updates can be edited and when examining results
we'll want to know which packages actually got used. We also
add a new module which runs at the end of postinstall and tries
to figure out which packages from the update were installed in
the course of the test. This still isn't a guarantee the test
actually *tested them* in any way, but it at least means they
got installed successfully and didn't interfere with the test.

Test Plan:
Run the update test workflow, check the logs get
uploaded and seem accurate (sometimes some RPM garbage messages
wind up in the package log, I'm not too worried about that at
present). Run the compose test workflow and check it didn't
break.

Reviewers: jsedlak

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1149
2017-02-23 14:51:19 -08:00

300 lines
11 KiB
Perl

# Copyright (C) 2014 SUSE Linux GmbH
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
use strict;
use testapi;
use autotest;
use needle;
# distribution-specific implementations of expected methods
my $distri = testapi::get_var("CASEDIR") . '/lib/fedoradistribution.pm';
require $distri;
testapi::set_distribution(fedoradistribution->new());
## UTILITY SUBROUTINES
# Stolen from openSUSE.
sub unregister_needle_tags($) {
my $tag = shift;
my @a = @{ needle::tags($tag) };
for my $n (@a) { $n->unregister(); }
}
# The purpose of this function is to un-register all needles which have
# at least one tag that starts with a given string (the 'prefix'), if
# it does not have any tag that matches the pattern 'prefix-value', for
# any of the values given in an array. The first argument passed must
# be the prefix; the second must be a reference to the array of values.
# For instance, if the 'prefix' is LANGUAGE and the 'values' are
# ENGLISH and FRENCH, this function would un-reference a needle which
# had only the tag 'LANGUAGE-DUTCH', but it would keep a needle which
# had the tag 'LANGUAGE-ENGLISH', or a needle with no tag starting in
# 'LANGUAGE-' at all.
sub unregister_prefix_tags {
my ($prefix, $valueref) = @_;
NEEDLE: for my $needle ( needle::all() ) {
my $unregister = 0;
for my $tag ( @{$needle->{'tags'}} ) {
if ($tag =~ /^\Q$prefix/) {
# We have at least one tag matching the prefix, so we
# *MAY* want to un-register the needle
$unregister = 1;
for my $value ( @{$valueref} ) {
# At any point if we hit a prefix-value match, we
# know we need to keep this needle and can skip
# to the next
next NEEDLE if ($tag eq "$prefix-$value");
}
}
}
# We get here if we hit no prefix-value match, but we only want
# to unregister the needle if we hit any prefix match, i.e. if
# 'unregister' is 1.
$needle->unregister() if ($unregister);
}
}
sub cleanup_needles() {
if (!get_var('LIVE') and !get_var('CANNED')) {
## Unregister smaller hub needles. Live and 'canned' installers have
## a smaller hub with no repository spokes. On other images we want
## to wait for repository setup to complete, but if we match that
## spoke's "ready" icon, it breaks live and canned because they
## don't have that spoke. So we have a needle which doesn't match
## on that icon, but we unregister it for other installs so they
## don't match on it too soon.
unregister_needle_tags("INSTALLER-smallhub");
}
# Unregister desktop needles of other desktops when DESKTOP is specified
if (get_var('DESKTOP')) {
unregister_prefix_tags('DESKTOP', [ get_var('DESKTOP') ])
}
# Unregister non-language-appropriate needles. See unregister_except_
# tags for details; basically all needles with at least one LANGUAGE-
# tag will be unregistered unless they match the current langauge.
my $langref = [ get_var('LANGUAGE') || 'english' ];
unregister_prefix_tags('LANGUAGE', $langref);
}
$needle::cleanuphandler = \&cleanup_needles;
## TEST LOADING SUBROUTINES
sub load_upgrade_tests() {
# all upgrade tests consist of: preinstall phase (where packages are upgraded and
# dnf-plugin-system-upgrade is installed), run phase (where upgrade is run) and postinstall
# phase (where is checked if fedora was upgraded successfully)
autotest::loadtest "tests/upgrade_preinstall.pm";
autotest::loadtest "tests/upgrade_run.pm";
# set postinstall test
set_var('POSTINSTALL', "upgrade_postinstall" );
}
sub load_install_tests() {
# normal installation test consists of several phases, from which some of them are
# loaded automatically and others are loaded based on what env variables are set
# generally speaking, install test consists of: boot phase, customization phase, installation
# and reboot phase, postinstall phase
# boot phase is loaded automatically every time
autotest::loadtest "tests/_boot_to_anaconda.pm";
# if this is a kickstart install, that's all folks
return if (get_var("KICKSTART"));
if (get_var('ANACONDA_TEXT')) {
# since it differs much, handle text installation separately
autotest::loadtest "tests/install_text.pm";
return;
}
## Networking
if (get_var('ANACONDA_STATIC')) {
autotest::loadtest "tests/_anaconda_network_static.pm";
}
## Installation source
if (get_var('MIRRORLIST_GRAPHICAL') || get_var("REPOSITORY_GRAPHICAL")) {
autotest::loadtest "tests/install_source_graphical.pm";
autotest::loadtest "tests/_check_install_source.pm";
}
if (get_var("REPOSITORY_VARIATION")){
autotest::loadtest "tests/_check_install_source.pm";
}
if (get_var('LIVE')) {
# No package set selection for lives.
set_var('PACKAGE_SET', "default");
}
## Select package set. Minimal is the default, if 'default' is specified, skip selection.
autotest::loadtest "tests/_software_selection.pm";
## Disk partitioning.
# If PARTITIONING is set, we pick the storage test
# to run based on the value (usually we run the test with the name
# that matches the value, except for a couple of commented cases).
my $storage = '';
my $partitioning = get_var('PARTITIONING');
# if PARTITIONING is unset, or one of [...], use disk_guided_empty,
# which is the simplest / 'default' case.
if (! $partitioning || $partitioning ~~ ['guided_empty', 'guided_free_space']) {
$storage = "tests/disk_guided_empty.pm";
}
else {
$storage = "tests/disk_".$partitioning.".pm";
}
autotest::loadtest $storage;
if (get_var("ENCRYPT_PASSWORD")){
autotest::loadtest "tests/disk_guided_encrypted.pm";
}
# Start installation, set user & root passwords, reboot
# install and reboot phase is loaded automatically every time (except when KICKSTART is set)
autotest::loadtest "tests/_do_install_and_reboot.pm";
}
sub _load_early_postinstall_tests() {
# Early post-install test loading. Split out as a separate sub
# because we do this all twice on update tests.
# Unlock encrypted storage volumes, if necessary. The test name here
# follows the 'storage post-install' convention, but must be run earlier.
if (get_var("ENCRYPT_PASSWORD")) {
autotest::loadtest "tests/disk_guided_encrypted_postinstall.pm";
}
# Appropriate login method for install type
if (get_var("DESKTOP")) {
autotest::loadtest "tests/_graphical_wait_login.pm";
}
# Test non-US input at this point, on language tests
if (get_var("SWITCHED_LAYOUT") || get_var("INPUT_METHOD")) {
autotest::loadtest "tests/_graphical_input.pm";
}
unless (get_var("DESKTOP")) {
autotest::loadtest "tests/_console_wait_login.pm";
}
}
sub load_postinstall_tests() {
# special case for the memory check test, as it doesn't need to boot
# the installed system: just load its test and return
if (get_var("MEMCHECK")) {
autotest::loadtest "tests/_memcheck.pm";
return;
}
# load the early tests
_load_early_postinstall_tests();
# do standard post-install static network config if the var is set
# this is here not in early_postinstall_tests as there's no need
# to do it twice
if (get_var("POST_STATIC")) {
autotest::loadtest "tests/_post_network_static.pm";
}
# if scheduler passed an advisory, update packages from that advisory
# (intended for the updates testing workflow, so we install the updates
# to be tested)
if (get_var("ADVISORY")) {
autotest::loadtest "tests/_advisory_update.pm";
# now load the early boot tests again, as _advisory_update reboots
_load_early_postinstall_tests();
}
# from now on, we have fully installed and booted system with root/specified user logged in
# If there is a post-install test to verify storage configuration worked
# correctly, run it. Again we determine the test name based on the value
# of PARTITIONING
my $storagepost = '';
if (get_var('PARTITIONING')) {
my $casedir = get_var("CASEDIR");
my $loc = "tests/disk_" . get_var('PARTITIONING') . "_postinstall.pm";
$storagepost = $loc if (-e "$casedir/$loc");
}
autotest::loadtest $storagepost if ($storagepost);
if (get_var("UEFI")) {
autotest::loadtest "tests/uefi_postinstall.pm";
}
# console avc / crash check
# it makes no sense to run this after logging in on most post-
# install tests (hence ! BOOTFROM) but we *do* want to run it on
# upgrade tests after upgrading (hence UPGRADE)
# desktops have specific tests for this (hence !DESKTOP). For
# desktop upgrades we should really upload a disk image at the end
# of upgrade and run all the desktop post-install tests on that
if (!get_var("DESKTOP") && (!get_var("BOOTFROM") || get_var("UPGRADE"))) {
autotest::loadtest "tests/_console_avc_crash.pm";
}
# generic post-install test load
if (get_var("POSTINSTALL")) {
my @pis = split(/ /, get_var("POSTINSTALL"));
foreach my $pi (@pis) {
autotest::loadtest "tests/${pi}.pm";
}
}
# load the ADVISORY post-install test - this records which update
# packages were actually installed during the test
if (get_var("ADVISORY")) {
autotest::loadtest "tests/_advisory_post.pm";
}
# we should shut down before uploading disk images
if (get_var("STORE_HDD_1") || get_var("PUBLISH_HDD_1")) {
autotest::loadtest "tests/_console_shutdown.pm";
}
}
## LOADING STARTS HERE
# if user set ENTRYPOINT, run required test directly
# (good for tests where it doesn't make sense to use _boot_to_anaconda, _software_selection etc.)
# if you want to run more than one test via ENTRYPOINT, separate them with space
if (get_var("ENTRYPOINT")) {
my @entrs = split(/ /, get_var("ENTRYPOINT"));
foreach my $entr (@entrs) {
autotest::loadtest "tests/${entr}.pm";
}
}
elsif (get_var("UPGRADE")) {
load_upgrade_tests;
}
elsif (!get_var("START_AFTER_TEST") && !get_var("BOOTFROM")) {
# for now we can assume START_AFTER_TEST and BOOTFROM mean the
# test picks up after an install, so we skip to post-install
load_install_tests;
}
if (!get_var("ENTRYPOINT")) {
load_postinstall_tests;
}
1;
# vim: set sw=4 et: