mirror of
https://github.com/rocky-linux/os-autoinst-distri-rocky.git
synced 2024-11-18 03:01:26 +00:00
b55782358d
This reduces the coverage of the identification test a bit but also *substantially* simplifies it. We run into a ton of problems when we try to check the version and prerelease text on screens where it appears on banners: * The banners differ between variants * The pre-release text is translated * The banners have gradients so for RTL languages, even if some text is untranslated (e.g. 'Fedora 31') it appears on a different background color than on LTR languages * The prerelease text is dark red; if it appears on a dark blue area of the banner this can trigger an os-autoinst needle comparison bug: https://progress.opensuse.org/issues/56822 All of this together means we wind up continually fighting these checks and we have a whole forest of needles just for them, and it doesn't seem worthwhile. So let's drop all the places where we were checking version and prerelease on banners, and only check them in two places where they appear on a grey background, which avoids most of the problems (we just need one version needle per release, and one prerelease needle per language). Signed-off-by: Adam Williamson <awilliam@redhat.com>
190 lines
7.8 KiB
Perl
190 lines
7.8 KiB
Perl
use base "anacondatest";
|
|
use strict;
|
|
use testapi;
|
|
use utils;
|
|
|
|
|
|
sub _set_root_password {
|
|
# Set root password, unless we don't want to or can't
|
|
# can also hit a transition animation
|
|
wait_still_screen 2;
|
|
my $root_password = get_var("ROOT_PASSWORD") || "weakpassword";
|
|
unless (get_var("INSTALLER_NO_ROOT")) {
|
|
assert_and_click "anaconda_install_root_password";
|
|
if (get_var("MEMCHECK")) {
|
|
# work around https://bugzilla.redhat.com/show_bug.cgi?id=1659266
|
|
unless (check_screen "anaconda_install_root_password_screen", 30) {
|
|
record_soft_failure "UI may be frozen due to brc#1659266";
|
|
assert_screen "anaconda_install_root_password_screen", 300;
|
|
}
|
|
}
|
|
else {
|
|
assert_screen "anaconda_install_root_password_screen";
|
|
}
|
|
# wait out animation
|
|
wait_still_screen 2;
|
|
desktop_switch_layout("ascii", "anaconda") if (get_var("SWITCHED_LAYOUT"));
|
|
if (get_var("IMAGETYPE") eq 'dvd-ostree') {
|
|
# we can't type SUPER safely for ostree installer tests, as
|
|
# the install completes quite fast and if we type too slow
|
|
# the USER CREATION spoke may be blocked
|
|
type_safely $root_password;
|
|
wait_screen_change { send_key "tab"; };
|
|
type_safely $root_password;
|
|
}
|
|
else {
|
|
# these screens seems insanely subject to typing errors, so
|
|
# type super safely. This doesn't really slow the test down
|
|
# as we still get done before the install process is complete.
|
|
type_very_safely $root_password;
|
|
wait_screen_change { send_key "tab"; };
|
|
type_very_safely $root_password;
|
|
}
|
|
# Another screen to test identification on
|
|
my $identification = get_var('IDENTIFICATION');
|
|
if ($identification eq 'true') {
|
|
check_top_bar();
|
|
# we don't check version or pre-release because here those
|
|
# texts appear on the banner which makes the needling
|
|
# complex and fragile (banner is different between variants,
|
|
# and has a gradient so for RTL languages the background color
|
|
# differs; pre-release text is also translated)
|
|
}
|
|
assert_and_click "anaconda_spoke_done";
|
|
}
|
|
}
|
|
|
|
sub _do_root_and_user {
|
|
_set_root_password();
|
|
# Wait out animation
|
|
sleep 8;
|
|
# Set user details, unless the test is configured not to create one
|
|
anaconda_create_user() unless (get_var("USER_LOGIN") eq 'false' || get_var("INSTALL_NO_USER"));
|
|
# Check username (and hence keyboard layout) if non-English
|
|
if (get_var('LANGUAGE')) {
|
|
assert_screen "anaconda_install_user_created";
|
|
}
|
|
}
|
|
|
|
sub run {
|
|
my $self = shift;
|
|
# From F31 onwards (after Fedora-Rawhide-20190722.n.1), user and
|
|
# root password spokes are moved to main hub, so we must do those
|
|
# before we run the install.
|
|
my $rootuserdone = 0;
|
|
assert_screen ["anaconda_main_hub_begin_installation", "anaconda_install_root_password"], 300;
|
|
if (match_has_tag "anaconda_install_root_password") {
|
|
_do_root_and_user();
|
|
$rootuserdone = 1;
|
|
}
|
|
# Begin installation
|
|
# Sometimes, the 'slide in from the top' animation messes with
|
|
# this - by the time we click the button isn't where it was any
|
|
# more. So wait for screen to stop moving before we click.
|
|
wait_still_screen 2;
|
|
assert_and_click "anaconda_main_hub_begin_installation";
|
|
|
|
# If we want to test identification we will do it
|
|
# on several places in this procedure, such as
|
|
# on this screen and also on password creation screens
|
|
# etc.
|
|
my $identification = get_var('IDENTIFICATION');
|
|
my $branched = get_var('VERSION');
|
|
if ($identification eq 'true' or $branched ne "Rawhide") {
|
|
check_left_bar();
|
|
check_prerelease();
|
|
check_version();
|
|
}
|
|
|
|
unless ($rootuserdone) {
|
|
_do_root_and_user();
|
|
# With the slow typing - especially with SWITCHED_LAYOUT - we
|
|
# may not complete user creation until anaconda reaches post-install,
|
|
# which causes a 'Finish configuration' button
|
|
if (check_screen "anaconda_install_finish_configuration", 5) {
|
|
assert_and_click "anaconda_install_finish_configuration";
|
|
}
|
|
}
|
|
|
|
# Wait for install to end. Give Rawhide a bit longer, in case
|
|
# we're on a debug kernel, debug kernel installs are really slow.
|
|
my $timeout = 1800;
|
|
my $version = lc(get_var('VERSION'));
|
|
if ($version eq "rawhide") {
|
|
$timeout = 2400;
|
|
}
|
|
# workstation especially has an unfortunate habit of kicking in
|
|
# the screensaver during install...
|
|
my $interval = 60;
|
|
while ($timeout > 0) {
|
|
# move the mouse a bit
|
|
mouse_set 100, 100;
|
|
mouse_hide;
|
|
last if (check_screen "anaconda_install_done", $interval);
|
|
$timeout -= $interval;
|
|
}
|
|
assert_screen "anaconda_install_done";
|
|
# wait for transition to complete so we don't click in the sidebar
|
|
wait_still_screen 3;
|
|
# if this is a live install, let's go ahead and quit the installer
|
|
# in all cases, just to make sure quitting doesn't crash etc.
|
|
assert_and_click "anaconda_install_done" if (get_var('LIVE'));
|
|
# there are various things we might have to do at a console here
|
|
# before we actually reboot. let's figure them all out first...
|
|
my @actions;
|
|
push (@actions, 'consoletty0') if (get_var("ARCH") eq "aarch64");
|
|
push (@actions, 'abrt') if (get_var("ABRT") eq "system");
|
|
push (@actions, 'rootpw') if (get_var("INSTALLER_NO_ROOT"));
|
|
# memcheck test doesn't need to reboot at all. Rebooting from GUI
|
|
# for lives is unreliable. And if we're already doing something
|
|
# else at a console, we may as well reboot from there too
|
|
push (@actions, 'reboot') if (!get_var("MEMCHECK") && (get_var("LIVE") || @actions));
|
|
# If we have no actions, let's just go ahead and reboot now,
|
|
# unless this is memcheck
|
|
unless (@actions) {
|
|
unless (get_var("MEMCHECK")) {
|
|
assert_and_click "anaconda_install_done";
|
|
}
|
|
return undef;
|
|
}
|
|
# OK, if we're here, we got actions, so head to a console. Switch
|
|
# to console after liveinst sometimes takes a while, so 30 secs
|
|
$self->root_console(timeout=>30);
|
|
if (grep {$_ eq 'consoletty0'} @actions) {
|
|
# somehow, by this point, localized keyboard layout has been
|
|
# loaded for this tty, so for French and Arabic at least we
|
|
# need to load the 'us' layout again for the next command to
|
|
# be typed correctly
|
|
console_loadkeys_us;
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1661288 results
|
|
# in boot messages going to serial console on aarch64, we need
|
|
# them on tty0. We also need 'quiet' so we don't get kernel
|
|
# messages, which screw up some needles
|
|
assert_script_run 'sed -i -e "s,\(GRUB_CMDLINE_LINUX.*\)\",\1 console=tty0 quiet\",g" /mnt/sysimage/etc/default/grub';
|
|
# regenerate the bootloader config
|
|
assert_script_run "chroot /mnt/sysimage grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg";
|
|
}
|
|
if (grep {$_ eq 'abrt'} @actions) {
|
|
# Chroot in the newly installed system and switch on ABRT systemwide
|
|
assert_script_run "chroot /mnt/sysimage abrt-auto-reporting 1";
|
|
}
|
|
if (grep {$_ eq 'rootpw'} @actions) {
|
|
my $mount = "/mnt/sysimage";
|
|
if (get_var("CANNED")) {
|
|
# finding the actual host system root is fun for ostree...
|
|
$mount = "/mnt/sysimage/ostree/deploy/fedora/deploy/*.?";
|
|
}
|
|
my $root_password = get_var("ROOT_PASSWORD") || "weakpassword";
|
|
assert_script_run "echo 'root:$root_password' | chpasswd -R $mount";
|
|
}
|
|
type_string "reboot\n" if (grep {$_ eq 'reboot'} @actions);
|
|
}
|
|
|
|
sub test_flags {
|
|
return { fatal => 1 };
|
|
}
|
|
|
|
1;
|
|
|
|
# vim: set sw=4 et:
|