Init R9

Rocky-8-aarch64-generic-Minimal.ks

@@ -1,3 +0,0 @@
-%include includes/rockyrepos8.ksi
-%include includes/gen-reposcommon8.ksi
-%include includes/gen-rockycommon8.ksi

Rocky-9-aarch64-generic-Minimal.ks

@@ -0,0 +1,3 @@
+%include includes/rockyrepos9.ksi
+%include includes/gen-reposcommon9.ksi
+%include includes/gen-rockycommon9.ksi

createimage.sh

@@ -8,7 +8,7 @@ if [ ! -f "${KSFILE}" ]; then
   echo "   $0 <KICKSTARTFILE>"
   echo
   echo "EXAMPLE"
-  echo "   $0 Rocky-Userland-8-aarch64-Generic-Minimal-4.ks"
+  echo "   $0 Rocky-Userland-9-aarch64-Generic-Minimal-4.ks"
   echo
   exit 1
 fi

includes/basecommon9.ksi

@@ -0,0 +1,9 @@
+keyboard us --xlayouts=us --vckeymap=us
+timezone --isUtc --nontp UTC
+selinux --enforcing
+firewall --enabled --port=22:tcp
+network --bootproto=dhcp --device=link --activate --onboot=on
+services --enabled=sshd,NetworkManager,chronyd
+shutdown
+bootloader --location=mbr --driveorder=sda
+lang en_US.UTF-8

includes/gen-packages9.ksi

@@ -0,0 +1,16 @@
+# Package setup
+%packages
+dracut-config-generic
+kernel
+kernel-core
+grub2-common
+grub2-efi-aa64
+grub2-efi-aa64-modules
+grubby
+efibootmgr
+shim-aa64
+systemd-udev
+uboot-tools
+-dracut-config-rescue
+
+%end

includes/gen-partitions9.ksi

@@ -0,0 +1,6 @@
+# Disk setup
+clearpart --initlabel --all
+part /boot/efi --asprimary --fstype=efi --size=512
+part /boot --asprimary --fstype=ext4 --size=1024 --label=boot
+part swap --asprimary --fstype=swap --size=512 --label=swap
+part / --asprimary --fstype=ext4 --size=3072 --label=rootfs

includes/gen-postcommon9.ksi

@@ -0,0 +1,55 @@
+%post
+# Setting correct yum variable to use raspberrypi kernel repo
+#echo "generic" > /etc/dnf/vars/kvariant
+#
+# Creating rocky user
+/usr/sbin/useradd -m -p '$6$2cuo4i8NE.Gbde2m$jQ3tX0SeDp0ZSvGZUUKAWg774vPeWhcYYpBaJkMNjULBm.Q41NwwWt6kCoWjF07dEQGCn7U/Ei.wQHyhACqk9.' rocky
+# Generic efi filename for VMs
+mkdir -p /boot/efi/EFI/BOOT
+if [ -d /boot/efi/EFI/rocky/ ] && [ -f /boot/efi/EFI/rocky/grubaa64.efi ];then
+    for j in grub.cfg grubenv;do
+        mv -f /boot/grub2/${j} /boot/efi/EFI/rocky/
+        ln -s ../efi/EFI/rocky/${j} /boot/grub2/${j}
+    done
+    cp -f /boot/efi/EFI/rocky/grubaa64.efi /boot/efi/EFI/BOOT/BOOTAA64.EFI
+fi
+
+cp -f /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
+cp -f /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
+
+rpm -e dracut-config-generic
+
+#setup dtb link by running "creating 10-devicetree.install"
+if [ -x /lib/kernel/install.d/10-devicetree.install ];then
+    /lib/kernel/install.d/10-devicetree.install remove
+fi
+
+### Write /etc/sysconfig/kernel
+cat << EOF > /etc/sysconfig/kernel
+# Written by image installer
+# UPDATEDEFAULT specifies if new-kernel-pkg should make new kernels the default
+UPDATEDEFAULT=yes
+
+# DEFAULTKERNEL specifies the default kernel package type
+DEFAULTKERNEL=kernel-core
+EOF
+chmod 644 /etc/sysconfig/kernel
+
+### Write grub defaults, turn off OS probing as it is always wrong for image creation
+cat << EOF > /etc/default/grub
+GRUB_TIMEOUT=5
+GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
+GRUB_DEFAULT=saved
+GRUB_DISABLE_SUBMENU=true
+GRUB_TERMINAL_OUTPUT="console"
+GRUB_CMDLINE_LINUX=""
+GRUB_DISABLE_RECOVERY="true"
+GRUB_DISABLE_OS_PROBER="true"
+GRUB_ENABLE_BLSCFG="false"
+EOF
+chmod 644 /etc/default/grub
+# fixing the rpmdb
+rpm --rebuilddb
+# remove /boot/dtb for some rpi to boot
+rm -f /boot/dtb
+%end

includes/gen-reposcommon9.ksi

@@ -0,0 +1 @@
+repo --name="instKern" --baseurl=https://rockyrepos.gnulab.org/gen_aarch64_el9/ --cost=100 --install

includes/gen-rockycommon9.ksi

@@ -0,0 +1,9 @@
+rootpw --iscrypted $6$2cuo4i8NE.Gbde2m$jQ3tX0SeDp0ZSvGZUUKAWg774vPeWhcYYpBaJkMNjULBm.Q41NwwWt6kCoWjF07dEQGCn7U/Ei.wQHyhACqk9.
+%include includes/basecommon9.ksi
+%include includes/gen-partitions9.ksi
+%include includes/packages9.ksi
+%include includes/gen-packages9.ksi
+%include includes/precommon9.ksi
+%include includes/rockyreadme9.ksi
+%include includes/gen-postcommon9.ksi
+%include includes/postcommon9.ksi

includes/packages9.ksi

@@ -0,0 +1,18 @@
+# Package setup
+%packages
+@core
+chrony
+glibc-langpack-en
+cloud-utils-growpart
+net-tools
+NetworkManager-wifi
+nano
+bash-completion
+uboot-images-armv8
+bcm2711-firmware
+bcm2835-firmware
+bcm283x-firmware
+bcm283x-overlays
+-java-11-*
+
+%end

includes/postcommon9.ksi

@@ -0,0 +1,10 @@
+%post
+# Remove ifcfg-link on pre generated images
+rm -f /etc/sysconfig/network-scripts/ifcfg-link
+
+# Remove machine-id on pre generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+%end
+%include includes/rootfs-expand.ksi

includes/precommon9.ksi

@@ -0,0 +1,4 @@
+%pre
+
+#End of Pre script for partitions
+%end

includes/rockyreadme9.ksi

@@ -0,0 +1,11 @@
+%post
+# Mandatory README file
+cat >/root/README << EOF
+== Rocky Linux 9 ==
+
+If you want to automatically resize your / partition, just type the following (as root user):
+rootfs-expand
+
+EOF
+
+%end

includes/rockyrepos9.ksi

@@ -0,0 +1,6 @@
+# Basic setup information
+url --url="https://download.rockylinux.org/pub/rocky/9/BaseOS/aarch64/os/"
+# Repositories to use
+repo --name="rocky9-baseos"    --baseurl=https://download.rockylinux.org/pub/rocky/9/BaseOS/aarch64/os/
+repo --name="rocky9-appstream" --baseurl=https://download.rockylinux.org/pub/rocky/9/AppStream/aarch64/os/
+repo --name="rocky9-powertools" --baseurl=https://download.rockylinux.org/pub/rocky/9/CRB/aarch64/os/