init riscv64 stuff

create-image.sh

@@ -90,7 +90,6 @@ if [[ -d "${APPLIANCE_NAME}" ]]; then
     pushd "${APPLIANCE_NAME}" || exit 1
     mv "../${APPLIANCE_NAME}.log" .
     mv "${APPLIANCE_NAME}-sda.raw" "${IMAGE_NAME}"
-    create_new_image
     zstd --compress -9 "${IMAGE_NAME}"
     sha512sum -- *.raw* > SHA512SUMS
     sha256sum -- *.raw* > SHA256SUMS

includes/base-configuration.ksi

@@ -7,5 +7,5 @@ timezone Asia/Kolkata
 selinux --enforcing
 firewall --enabled --ssh
 network --device=link --activate --bootproto=dhcp --onboot=on --hostname=altarchdevel
-bootloader --location=mbr --boot-drive=sda
+bootloader --location=mbr --boot-drive=sda --sdboot
 shutdown # power-off after the installation completes

includes/disk-layout.ksi

@@ -10,6 +10,6 @@ clearpart --drives=sda --disklabel=gpt --all
 # 1073.74 MB = 1024 MiB
 # 3758.09 MB = 3584 MiB
 # Keep /boot formatted as ext4 since that's what U-Boot can read
-part /boot/efi --asprimary --ondisk=sda --size=133  --label=rockyefi  --fstype=efi
+part /boot/efi --asprimary --ondisk=sda --size=133  --label=rvefi  --fstype=efi
-part /boot     --asprimary --ondisk=sda --size=1072 --label=rockyboot --fstype=ext4
+part /boot     --asprimary --ondisk=sda --size=1072 --label=rvboot --fstype=ext4
-part /         --asprimary --ondisk=sda --size=3757 --label=rockyroot --fstype=ext4
+part /         --asprimary --ondisk=sda --size=3757 --label=rvroot --fstype=ext4

includes/package-list.ksi

@@ -1,5 +1,5 @@
 %packages --exclude-weakdeps
-rocky-release
+fedora-release
 
 # The '@core' group installs, as it's name suggests, packages that are core
 # to _any_:tm: Linux distribution. This includes packages like system, passwd,
@@ -8,7 +8,7 @@ rocky-release
 @standard
 
 # Kernel selection
-kernel-mainline-sbc
+kernel-core
 
 # Other necessary packages
 cloud-utils-growpart
@@ -18,6 +18,7 @@ NetworkManager-wifi
 
 # Extra add-ons
 git
+openssh
 pciutils
 tmux
 util-linux
@@ -25,32 +26,33 @@ util-linux
 # Extra packages to do 'U-Boot -> GRUB -> Linux'
 dracut-config-generic
 efibootmgr
-grub2-common
+# systemd-boot
-grub2-efi-aa64
+sdubby
-grub2-efi-aa64-modules
+systemd-boot-unsigned
-grubby
+# GRUB2
-openssh
+#grub2-common
-shim-aa64
+#grub2-efi-aa64
+#grub2-efi-aa64-modules
+#grubby
+#shim-aa64
 # Packages from SIG/AltArch
-uboot-images-armv8 # This provides actual U-Boot binaries for SBCs
+uboot-images-riscv64 # This provides actual U-Boot binaries for SBCs
 uboot-tools # This provides tools to interact with U-Boot (if stored on SPI) like fw_printenv, fw_setenv, mkimage, gen_eth_addr, etc
-# Raspberry Pi firmware (needed to boot $OS on a Raspberry Pi)
-bcm283x-firmware # This will pull in other RPi related firmware and bcm283x-overlays
 
 # Trust me, they're nice!
 appliance-tools
-aria2
+#aria2
-bat
+#bat
-btop
+#btop
-dash
+#dash
-epel-release
+#epel-release
 gzip
 hdparm
 htop
 mock
-parallel
+#parallel
 perl-Digest-SHA
-picocom
+#picocom
 procps-ng
 pykickstart
 ripgrep
@@ -64,54 +66,13 @@ xz
 yt-dlp
 zstd
 
-# for building Linux & U-Boot
-arm-trusted-firmware-armv8
-asciidoc
-audit-libs-devel
-binutils-devel
-bison
-dwarves
-elfutils-devel
-flex
-gcc
-gcc-c++
-gcc-plugin-devel
-glibc-static
-gnutls-devel
-kernel-rpm-macros
-libbabeltrace-devel
-libbpf-devel
-libcap-devel
-libcap-ng-devel
-libnl3-devel
-libtraceevent-devel
-libuuid-devel
-m4
-make
-ncurses-devel
-newt-devel
-numactl-devel
-opencsd-devel
-openssl-devel
-pciutils-devel
-perl(ExtUtils::Embed)
-perl-devel
-perl-generators
-python3-devel
-python3-docutils
-python3-libfdt
-python3-pyelftools
-SDL2-devel
-swig
-xmlto
-xz-devel
-zlib-devel
-
 # Remove some packages
+-abrt-cli
 -cockpit*
 -dracut-config-rescue
 -java-11-*
 -plymouth
+-smartmontools
 # no "stock" EL kernel
 -kernel-core
 -kmod-kvdo

includes/post/expand-rootfs.ksi

@@ -1,12 +1,2 @@
 %post
-set -x
-
-# The script that expands root partition
-[ -d /usr/local/bin ] || mkdir --verbose /usr/local/bin
-curl 'https://git.resf.org/thefossguy/sbc-images/raw/branch/rocky-generic/scripts/expand-rootfs.sh' --output /usr/local/bin/expand-rootfs.sh || exit 1
-curl 'https://git.resf.org/thefossguy/sbc-images/raw/branch/rocky-generic/scripts/expand-rootfs.service' --output /etc/systemd/system/expand-rootfs.service || exit 1
-[ -f /usr/local/bin/expand-rootfs.sh ] && \
-    chmod --verbose +x /usr/local/bin/expand-rootfs.sh
-systemctl enable expand-rootfs.service
-
 %end

includes/post/grub-setup.ksi

@@ -1,17 +1,6 @@
 %post
 set -x
 
-if [[ -d /boot/efi/EFI/rocky ]] && [[ -f /boot/efi/EFI/rocky/grubaa64.efi ]]; then
-    mv -vf /boot/grub2/grub.cfg /boot/efi/EFI/rocky/grub.cfg
-    ln -s ../efi/EFI/rocky/grub.cfg /boot/grub2/grub.cfg
-
-    [[ -d /boot/efi/EFI/BOOT ]] || mkdir -vp /boot/efi/EFI/BOOT
-    cp -vf /boot/efi/EFI/rocky/grubaa64.efi /boot/efi/EFI/BOOT/BOOTAA64.EFI
-else
-    echo "Something is wrong with the current GRUB install. Have fun debugging. Bye."
-    exit 1
-fi
-
 cat << EOF > /etc/sysconfig/kernel
 # the latest kernel should be the first entry in the bootloader
 # this should be the default, but here we are
@@ -22,7 +11,4 @@ DEFAULTKERNEL=kernel-core
 EOF
 
 chmod 644 /etc/sysconfig/kernel
-
-grubby --update-kernel=ALL --args='systemd.show_status=false'
-
 %end

includes/post/rpi-setup.ksi

@@ -1,9 +1,2 @@
 %post
-set -x
-
-# U-Boot binaries for 32-bit and 64-bit Raspberry Pi models
-# (these are loaded by /boot/efi/config.txt)
-cp -v -f /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
-cp -v -f /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
-
 %end

includes/post/rpm-repos-enable.ksi

@@ -1,47 +1,4 @@
 %post --erroronfail
 set -x
-
-MACHINE_ARCH="$(uname -m)"
-VERSION_ID="$(source <(grep VERSION_ID /etc/os-release) && awk -F '.' '{print $1}' <<< $VERSION_ID)"
-
-# This repository is a given since it provides 'uboot-images-armv8' and
-# 'uboot-tools', which are **required**.
-dnf config-manager --assumeyes --add-repo "https://download.rockylinux.org/pub/sig/${VERSION_ID}/altarch/${MACHINE_ARCH}/altarch-common"
-if ! dnf repolist --enabled | grep "download.rockylinux.org_pub_sig_${VERSION_ID}_altarch_${MACHINE_ARCH}_altarch-common" > /dev/null; then
-    dnf config-manager --set-enabled "download.rockylinux.org_pub_sig_${VERSION_ID}_altarch_${MACHINE_ARCH}_altarch-common" || exit 1
-fi
-
-# import the SIG/AltArch key manually, since it does not get automatically get imported...
-wget "https://download.rockylinux.org/pub/sig/${VERSION_ID}/altarch/${MACHINE_ARCH}/altarch-common/RPM-GPG-KEY-Rocky-SIG-AltArch"
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
-rpm --import RPM-GPG-KEY-Rocky-SIG-AltArch
-rm RPM-GPG-KEY-Rocky-SIG-AltArch
-
-# Enable EPEL if packages are installed from EPEL
-if dnf list installed | grep '@epel' > /dev/null || dnf list installed | grep 'epel-release' > /dev/null; then
-    dnf install --assumeyes epel-release
-
-    if ! dnf repolist --enabled | grep 'crb' > /dev/null; then
-        dnf config-manager --set-enabled crb || exit 1
-    fi
-
-    if ! dnf repolist --enabled | grep 'epel' > /dev/null; then
-        dnf config-manager --set-enabled epel || exit 1
-    fi
-fi
-
-# SIG/kernel's kernel-mainline-sbc
-dnf copr enable --assumeyes prathampatel/kernel-rocky "rhel-${VERSION_ID}-${MACHINE_ARCH}"
-if ! dnf repolist --enabled | grep 'copr:copr.fedorainfracloud.org:prathampatel:kernel-rocky' > /dev/null; then
-    dnf config-manager --set-enabled 'copr:copr.fedorainfracloud.org:prathampatel:kernel-rocky' || exit 1
-fi
-echo 'metadata_expire=2400' | tee -a '/etc/yum.repos.d/_copr:copr.fedorainfracloud.org:prathampatel:kernel-rocky.repo'
-
-# manually import the GPG keys for my COPRs
-wget 'https://download.copr.fedorainfracloud.org/results/prathampatel/kernel-rocky/pubkey.gpg' -O kernel-rocky-pubkey.gpg
-rpm --import kernel-elrepo-pubkey.gpg
-rm -vf kernel-elrepo-pubkey.gpg
-
 dnf clean expire-cache
-
 %end

includes/post/user-setup.ksi

@@ -28,12 +28,8 @@ cat << EOF > get-dotfiles.sh
 #!/usr/bin/env bash
 
 set -x
-if [[ "$(id -u)" -eq 0 ]]; then
+HOME='/home/pratham'
-    echo "Not gonna run as root"
+[[ -d "$HOME" ]] || exit 1
-    exit 1
-fi
-
-echo "Hi $USER"
 git clone --bare https://gitlab.com/thefossguy/dotfiles.git "${HOME}/.dotfiles"
 git --git-dir="${HOME}/.dotfiles" --work-tree="${HOME}" checkout -f
 rm -rf "${HOME}/.config/nvim"
@@ -44,5 +40,4 @@ rm -vf get-dotfiles.sh
 
 # Lock the root account
 passwd -l root
-
 %end

includes/repos/repos-master.ksi

@@ -1,3 +1 @@
-%include sig-kernel.ksi
-%include epel.ksi
 %include rocky.ksi

includes/repos/rocky.ksi

@@ -1,11 +1,3 @@
 # Specify where our (EL distro) "base" resides
-url --url=https://download.rockylinux.org/pub/rocky/$releasever/BaseOS/$basearch/os
+url --url=http://fedora.riscv.rocks/repos-dist/$releasever/latest/$basearch
-
+repo --install --name=Fedora   --baseurl=http://fedora.riscv.rocks/repos-dist/$releasever/latest/$basearch
-# BaseURLs for the default repositories
-# The 'kernel-*' packages are disabled from these "default" repositories
-# because many of the SBCs require a kernel (be it LTS or stable) that is
-# newer than what our EL distro provide
-repo --install --name=AppStream   --baseurl=https://download.rockylinux.org/pub/rocky/$releasever/AppStream/$basearch/os
-repo --install --name=BaseOS      --baseurl=https://download.rockylinux.org/pub/rocky/$releasever/BaseOS/$basearch/os
-repo --install --name=CRB         --baseurl=https://download.rockylinux.org/pub/rocky/$releasever/CRB/$basearch/os
-repo --install --name=SIG-AltArch --baseurl=https://download.rockylinux.org/pub/sig/$releasever/altarch/$basearch/altarch-common