This commit is contained in:
nazunalika 2022-06-02 14:47:36 -07:00
parent dc8d1a0ef8
commit 0b878ece70
Signed by: label
GPG Key ID: 6735C0E1BD65D048
16 changed files with 538 additions and 0 deletions

View File

@ -0,0 +1,6 @@
passwd: {if "with-files-domain":sss files|files sss} systemd {exclude if "with-custom-passwd"}
group: {if "with-files-domain":sss files|files sss} systemd {exclude if "with-custom-group"}
netgroup: sss files {exclude if "with-custom-netgroup"}
automount: sss files {exclude if "with-custom-automount"}
services: sss files {exclude if "with-custom-services"}
sudoers: files sss {include if "with-sudo"}

View File

@ -0,0 +1,40 @@
{imply "with-smartcard" if "with-smartcard-required"}
auth required pam_env.so
auth required pam_faildelay.so delay=2000000
auth required pam_faillock.so preauth audit silent deny=5 unlock_time=900 {include if "with-faillock"}
auth [success=1 default=ignore] pam_succeed_if.so service notin login:gdm:xdm:kdm:xscreensaver:gnome-screensaver:kscreensaver quiet use_uid {include if "with-smartcard-required"}
auth [success=done ignore=ignore default=die] pam_sss.so require_cert_auth ignore_authinfo_unavail {include if "with-smartcard-required"}
auth sufficient pam_fprintd.so {include if "with-fingerprint"}
auth sufficient pam_u2f.so cue {include if "with-pam-u2f"}
auth required pam_u2f.so cue {if not "without-pam-u2f-nouserok":nouserok} {include if "with-pam-u2f-2fa"}
auth [default=1 ignore=ignore success=ok] pam_usertype.so isregular
auth [default=1 ignore=ignore success=ok] pam_localuser.so {exclude if "with-smartcard"}
auth [default=2 ignore=ignore success=ok] pam_localuser.so {include if "with-smartcard"}
auth [success=done authinfo_unavail=ignore ignore=ignore default=die] pam_sss.so try_cert_auth {include if "with-smartcard"}
auth sufficient pam_unix.so {if not "without-nullok":nullok} try_first_pass
auth [default=1 ignore=ignore success=ok] pam_usertype.so isregular
auth sufficient pam_sss.so forward_pass
auth required pam_faillock.so authfail audit deny=5 unlock_time=900 fail_interval=900 {include if "with-faillock"}
auth required pam_deny.so
account required pam_access.so {include if "with-pamaccess"}
account required pam_faillock.so {include if "with-faillock"}
account required pam_unix.so
account sufficient pam_localuser.so {exclude if "with-files-access-provider"}
account sufficient pam_usertype.so issystem
account [default=bad success=ok user_unknown=ignore] pam_sss.so
account required pam_permit.so
password requisite pam_pwquality.so try_first_pass local_users_only minlen=14 dcredit=-1 lcredit=-1 ucredit=-1 ocredit=-1 retry=3
password requisite pam_pwhistory.so use_authok remember=5
password sufficient pam_unix.so sha512 shadow {if not "without-nullok":nullok} try_first_pass use_authtok
password sufficient pam_sss.so use_authtok
password required pam_deny.so
session optional pam_keyinit.so revoke
session required pam_limits.so
-session optional pam_systemd.so
session optional pam_oddjob_mkhomedir.so umask=0077 {include if "with-mkhomedir"}
session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid
session required pam_unix.so
session optional pam_sss.so

View File

@ -0,0 +1 @@
RedHat-9-nsswitch.conf

View File

@ -0,0 +1 @@
RedHat-9-system-auth

View File

@ -22,6 +22,43 @@
validate: /usr/sbin/sshd -t -f %s validate: /usr/sbin/sshd -t -f %s
backup: true backup: true
notify: restart_sshd notify: restart_sshd
- name: Ensure sshd_config.d dir exists
ansible.builtin.file:
state: directory
path: "/etc/ssh/sshd_config.d"
owner: root
group: root
mode: '0700'
notify: restart_sshd
- name: Default Modular Configuration
when:
- (ansible_facts['distribution'] == 'Fedora') or
(ansible_facts['distribution'] in el_distro_name and ansible_facts['distribution_major_version']|int >= 9)
block:
- name: Modular configuration (redhat)
template:
src: "etc/ssh/{{ ansible_distribution }}-{{ ansible_distribution_major_version }}-50-redhat.conf.j2"
dest: "{{ ssh_modular_config }}"
owner: root
group: root
mode: '0600'
validate: /usr/sbin/sshd -t -f %s
backup: yes
notify: restart_sshd
- name: Custom Modular Configuration
template:
src: "etc/ssh/{{ ansible_distribution }}-{{ ansible_distribution_major_version }}-60-shootthej.conf.j2"
dest: "/etc/ssh/sshd_config.d/60-shootthej.conf"
owner: root
group: root
mode: '0600'
validate: /usr/sbin/sshd -t -f %s
backup: yes
notify: restart_sshd
rescue: rescue:
- name: Print errors for configuration and validation - name: Print errors for configuration and validation
debug: debug:

View File

@ -0,0 +1,97 @@
# Ignore CWD logs
-a exclude,always -F msgtype=CWD
-a always,exit -F arch=b64 -S adjtimex -S settimeofday -k time-change
-a always,exit -F arch=b32 -S adjtimex -S settimeofday -S stime -k time-change
-a always,exit -F arch=b64 -S clock_settime -F a0=0x0 -F key=time-change
-a always,exit -F arch=b32 -S clock_settime -F a0=0x0 -F key=time-change
-w /etc/localtime -p wa -k time-change
## Records when events occur that modify user and group passwords and ID's
{% for y in audit_identity_list %}
-w {{ y }} -p wa -k identity
{% endfor %}
## Records changes to network environment files or system calls
-a always,exit -F arch=b64 -S sethostname -S setdomainname -k system-locale
-a always,exit -F arch=b32 -S sethostname -S setdomainname -k system-locale
-w /etc/issue -p wa -k system-locale
-w /etc/issue.net -p wa -k system-locale
-w /etc/hosts -p wa -k system-locale
-w /etc/hostname -p wa -k system-locale
-w /etc/sysconfig/network -p wa -k system-locale
-a always,exit -F dir=/etc/NetworkManager/ -F perm=wa -F key=system-locale
## Monitors SELinux Mandatory Access Controls
-w /etc/selinux/ -p wa -k MAC-policy
-w /usr/share/selinux/ -p wa -k MAC-policy
## Monitors login/logout/failed login events
# To be fair, these are normally logged in /var/log/secure
{% for y in audit_logins %}
-w {{ y }} -p wa -k logins
{% endfor %}
## Monitor session initiation events
## This will track file changes within sessions
{% for y in audit_session %}
-w {{ y }} -p wa -k session
{% endfor %}
## Monitor changes for files for UID's above {{ audit_auid }}
# You can take this out if you are on a non-PCI system
-a always,exit -F arch=b64 -S chmod -S fchmod -S fchmodat -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
-a always,exit -F arch=b32 -S chmod -S fchmod -S fchmodat -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
-a always,exit -F arch=b64 -S chown -S fchown -S fchownat -S lchown -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
-a always,exit -F arch=b32 -S chown -S fchown -S fchownat -S lchown -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
-a always,exit -F arch=b64 -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
-a always,exit -F arch=b32 -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
-a always,exit -F arch=b32 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>={{ audit_auid }} -F auid!=4294967295 -k access
-a always,exit -F arch=b64 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>={{ audit_auid }} -F auid!=4294967295 -k access
-a always,exit -F arch=b32 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>={{ audit_auid }} -F auid!=4294967295 -k access
-a always,exit -F arch=b64 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>={{ audit_auid }} -F auid!=4294967295 -k access
## Monitors mounting events for users
# You can probably take these out
-a always,exit -F arch=b64 -S mount -F auid>={{ audit_auid }} -F auid!=4294967295 -k mounts
-a always,exit -F arch=b32 -S mount -F auid>={{ audit_auid }} -F auid!=4294967295 -k mounts
## Collect file deletion events by a user
-a always,exit -F arch=b64 -S rmdir -S unlink -S unlinkat -S rename -S renameat -F auid>={{ audit_auid }} -F auid!=4294967295 -k delete
-a always,exit -F arch=b32 -S rmdir -S unlink -S unlinkat -S rename -S renameat -F auid>={{ audit_auid }} -F auid!=4294967295 -k delete
## Collect changes to System Administration Scope
# Note: This only records /etc/sudoers and doesn't watch /etc/sudoers.d
-w /etc/sudoers -p wa -k scope
-w /etc/sudoers.d -p wa -k scope
## Collect System Administrator Actions (sudolog)
-w /var/log/sudo.log -p wa -k actions
## Collect Kernel Module Loading and Unloading
-w /sbin/kmod -p x -k modules
-w /sbin/insmod -p x -k modules
-w /sbin/rmmod -p x -k modules
-w /sbin/modprobe -p x -k modules
-a always,exit -F arch=b64 -S init_module,finit_module -S delete_module -k modules
-a always,exit -F arch=b32 -S init_module,finit_module -S delete_module -k modules
{% for y in audit_suid_list %}
-a always,exit -F path={{ y }} -F perm=x -F auid>={{ audit_auid }} -F auid!=4294967295 -k privileged
{% endfor %}
# Is someone messing with our audit logs?
-w /var/log/audit/ -k audit-logs
-a always,exit -F dir=/var/log/audit/ -F perm=r -F auid>=1000 -F auid!=4294967295 -F key=audit-logs
-a always,exit -F path=/usr/sbin/ausearch -F perm=x -F key=audit-logs
-a always,exit -F path=/usr/sbin/aureport -F perm=x -F key=audit-logs
-a always,exit -F path=/usr/sbin/aulast -F perm=x -F key=audit-logs
-a always,exit -F path=/usr/sbin/aulastlogin -F perm=x -F key=audit-logs
-a always,exit -F path=/usr/sbin/auvirt -F perm=x -F key=audit-logs
# Privilege elevation
-a always,exit -F arch=b64 -S setuid -Fa0=0 -F exe={{ bin_su }} -F key=privileged
-a always,exit -F arch=b32 -S setuid -Fa0=0 -F exe={{ bin_su }} -F key=privileged
-a always,exit -F arch=b64 -S setresuid -F a0=0 -F exe={{ bin_sudo }} -F key=privileged
-a always,exit -F arch=b32 -S setresuid -F a0=0 -F exe={{ bin_sudo }} -F key=privileged
-a always,exit -F arch=b64 -S execve -C uid!=euid -F euid=0 -F key=privileged
-a always,exit -F arch=b32 -S execve -C uid!=euid -F euid=0 -F key=privileged
-e 2

View File

@ -0,0 +1,37 @@
# Remote servers for client association.
{% for s in chrony_timeservers %}
server {{ s }} iburst {% if loop.first %}prefer{% endif %}
{% endfor %}
# Ignore stratum in source selection.
stratumweight 0
# Record the rate at which the system clock gains/losses time.
driftfile {{ chrony_homedir }}/drift
# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1.0 second.
makestep 1.0 3
# If chrony_server=true allow clients to connect
{% if chrony_server is sameas true %}
allow {{ chrony_allow_cidr }}
bindaddress 0.0.0.0
{% else %}
# Else If Client Deny NTP client access.
deny all
{% endif %}
# Allow cmdaccess for localhost only (monitoring sometimes requires this to be opened to mgmt interface)
bindcmdaddress 127.0.0.1
bindcmdaddress ::1
cmdallow
# Send a message to syslog if a clock adjustment is larger than 0.5 seconds.
logchange 0.5
# Specify directory for log files.
logdir {{ chrony_logdir }}
# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

View File

@ -0,0 +1,4 @@
# Generated by Ansible
{% for fs in modprobe_unused_filesystems %}
install {{ fs }} /bin/true
{% endfor %}

View File

@ -0,0 +1,3 @@
# Generated by Ansible
search {{ ipareplica_domain }}
nameserver {{ ipa_dns_master }}

View File

@ -0,0 +1 @@
RedHat-8-sshd_config.j2

View File

@ -0,0 +1 @@
RedHat-9-sshd_config.j2

View File

@ -0,0 +1,174 @@
# $OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
# If you want to change the port on a SELinux system, you have to tell
# SELinux about this change.
# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
#
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_ecdsa_key
HostKey /etc/ssh/ssh_host_ed25519_key
# Ciphers and keying
#RekeyLimit default none
# System-wide Crypto policy:
# This system is following system-wide crypto policy. The changes to
# Ciphers, MACs, KexAlgoritms and GSSAPIKexAlgorithsm will not have any
# effect here. They will be overridden by command-line options passed on
# the server start up.
# To opt out, uncomment a line with redefinition of CRYPTO_POLICY=
# variable in /etc/sysconfig/sshd to overwrite the policy.
# For more information, see manual page for update-crypto-policies(8).
# Logging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
#ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
#KerberosUseKuserok yes
# GSSAPI options
GSSAPIAuthentication yes
GSSAPICleanupCredentials no
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no
#GSSAPIEnablek5users no
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
# WARNING: 'UsePAM no' is not supported in Fedora and may cause several
# problems.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
# It is recommended to use pam_motd in /etc/pam.d/sshd instead of PrintMotd,
# as it is more configurable and versatile than the built-in version.
PrintMotd no
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS no
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server
################################################################################
# Below managed by {{ ansible_managed }}
#
Banner /etc/rockybanner
PermitRootLogin no
X11Forwarding no
LoginGraceTime 1m
# FIPS Compliant
# This has no effect in RHEL 8 or Fedora. However, in the case of compliance
# higher than that of PCI, it may be a good idea to override it.
MACs hmac-sha2-512,hmac-sha2-256
Ciphers aes256-ctr,aes192-ctr,aes128-ctr
# IPA
AuthorizedKeysCommand /usr/bin/sss_ssh_authorizedkeys
AuthorizedKeysCommandUser nobody
ChallengeResponseAuthentication yes
PasswordAuthentication no
Include /etc/ssh/sshd_config.d/*.conf
{% if 'gitlabservers' in group_names %}
AllowUsers git@* *@10.*
{% endif %}

View File

@ -0,0 +1,130 @@
# $OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
# To modify the system-wide sshd configuration, create a *.conf file under
# /etc/ssh/sshd_config.d/ which will be automatically included below
Include /etc/ssh/sshd_config.d/*.conf
# If you want to change the port on a SELinux system, you have to tell
# SELinux about this change.
# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
#
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
# Ciphers and keying
#RekeyLimit default none
# Logging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin prohibit-password
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
#KbdInteractiveAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
#KerberosUseKuserok yes
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no
#GSSAPIEnablek5users no
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the KbdInteractiveAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via KbdInteractiveAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and KbdInteractiveAuthentication to 'no'.
# WARNING: 'UsePAM no' is not supported in Fedora and may cause several
# problems.
#UsePAM no
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server

View File

@ -0,0 +1 @@
RedHat-8-sshd_config.j2

View File

@ -0,0 +1 @@
RedHat-9-sshd_config.j2

View File

@ -1,6 +1,10 @@
# Variables for our common module for RedHat # Variables for our common module for RedHat
--- ---
el_distro_name:
- CentOS
- Rocky
bin_su: /usr/bin/su bin_su: /usr/bin/su
bin_sudo: /usr/bin/sudo bin_sudo: /usr/bin/sudo