rocky-tools/migrate2rocky.sh

533 lines
17 KiB
Bash

#!/bin/bash
#
# migrate2rocky - Migrate another EL8 distribution to RockyLinux 8.
# By: Peter Ajamian <peter@pajamian.dhs.org>
# Adapted from centos2rocky.sh by label <label@rockylinux.org>
#
## Rocky is RC status. Using this script means you accept all risks of system
## instability.
# Path to logfile
logfile=/var/log/centos2rocky.log
# Send all output to the logfile as well as stdout.
truncate -s0 "$logfile"
exec > >(tee -a "$logfile") 2> >(tee -a "$logfile" >&2)
# List nocolor last here so that -x doesn't bork the display.
errcolor=$(tput setaf 1)
blue=$(tput setaf 4)
nocolor=$(tput op)
export LANG=en_US.UTF-8
shopt -s nullglob
SUPPORTED_MAJOR="8"
SUPPORTED_PLATFORM="platform:el$SUPPORTED_MAJOR"
ARCH=$(arch)
repo_urls=(
"rockybaseos,https://dl.rockylinux.org/pub/rocky/${SUPPORTED_MAJOR}/BaseOS/$ARCH/os/"
"rockyappstream,https://dl.rockylinux.org/pub/rocky/${SUPPORTED_MAJOR}/AppStream/$ARCH/os/"
)
unset CDPATH
exit_message() {
printf '%s\n' "$1"
final_message
exit 1
} >&2
final_message() {
printf '%s\n' "${errcolor}An error occurred while we were attempting to convert your system to Rocky Linux. Your system may be unstable. Script will now exit to prevent possible damage.$nocolor"
logmessage
}
logmessage(){
printf '%s\n' "${blue}A log of this installation can be found at $logfile$nocolor"
}
# This just grabs a field from os-release and returns it.
os-release () (
. /etc/os-release
if ! [[ ${!1} ]]; then
return 1
fi
printf '%s\n' "${!1}"
)
# All of the binaries used by this script are available in a EL8 minimal install
# and are in /bin, so we should not encounter a system where the script doesn't
# work unless it's severly broken. This is just a simple check that will cause
# the script to bail if any expected system utilities are missing.
bin_check() {
# Make sure we're root.
if (( EUID != 0 )); then
exit_message "You must run this script as root. Either use sudo or 'su -c ${0}'"
fi
# Check the platform.
if [[ $(os-release PLATFORM_ID) != $SUPPORTED_PLATFORM ]]; then
exit_message "This script must be run on an EL8 distribution. Migration from other distributions is not supported."
fi
# We need bash version >= 4 for associative arrays. This will also verify
# that we're actually running bash.
if (( BASH_VERSINFO < 4 )); then
exit_message "bash >= 4.0 is required for this script."
fi
local -a missing
for bin in rpm dnf awk column tee tput mkdir cat arch sort uniq rmdir rm; do
if ! type "$bin" >/dev/null 2>&1; then
missing+=("$bin")
fi
done
if (( ${#missing[@]} )); then
exit_message "Commands not found: ${missing[@]}. Possible bad PATH setting or corrupt installation."
fi
}
# This function will overwrite the repoquery_results associative array with the
# info for the resulting package. Note that we explicitly disable the epel repo
# as a special-case below to avoid having the extras repository map to epel.
repoquery () {
local name val prev result=$(
dnf -q --setopt=epel.excludepkgs=epel-release repoquery -i "$1" ||
exit_message "Failed to fetch info for package $1."
)
if ! [[ $result ]]; then
# We didn't match this package, the repo could be disabled.
return 1
fi
declare -gA repoquery_results=()
while IFS=" :" read -r name val; do
if [[ -z $name ]]; then
repoquery_results[$prev]+=" $val"
else
prev=$name
repoquery_results[$name]=$val
fi
done <<<"$result"
}
# This function will overwrite the repoinfo_results associative array with the
# info for the resulting repository.
repoinfo () {
local name val result
result=$(dnf -q repoinfo "$1") ||
exit_message "Failed to fetch info for repository $1."
if [[ $result == 'Total packages: 0' ]]; then
# We didn't match this repo.
return 1
fi
declare -gA repoinfo_results=()
while IFS=" :" read -r name val; do
if [[ -z $name ]]; then
repoinfo_results[$prev]+=" $val"
else
prev=$name
repoinfo_results[$name]=$val
fi
done <<<"$result"
# dnf repoinfo doesn't return the gpgkey, but we need that so we have to get
# it from the repo file itself.
# "end_of_file" is a hack here. Since it is not a valid dnf setting we know
# it won't appear in a .repo file on a line by itself, so it's safe to
# search for the string to make the awk parser look all the way to the end
# of the file.
repoinfo_results[Repo-gpgkey]=$(
awk '
$0=="['"${repoinfo_results[Repo-id]}"']",$0=="end_of_file" {
if (l++ < 1) {next}
else if (/^\[.*\]$/) {nextfile}
else if (sub(/^gpgkey\s*=\s*file:\/\//,"")) {print; nextfile}
else {next}
}
' < "${repoinfo_results[Repo-filename]}"
)
# Add an indicator of whether this is a subscription-manager managed
# repository.
repoinfo_results[Repo-managed]=$(
awk '
BEGIN {FS="[)(]"}
/^# Managed by \(.*\) subscription-manager$/ {print $2}
' < "${repoinfo_results[Repo-filename]}"
)
}
provides_pkg () (
if [[ ! $1 ]]; then
return 0
fi
set -o pipefail
provides=$(dnf -q provides "$1" | awk '{print $1; nextfile}') ||
return 1
set +o pipefail
pkg=$(dnf -q repoquery --queryformat '%{NAME}' "$provides") ||
exit_message "Can't get package name for $provides."
printf '%s\n' "$pkg"
)
collect_system_info () {
# Don't enable these module streams, even if they are enabled in the source
# distro.
declare -g -a module_excludes
module_excludes=(
libselinux-python:2.8
)
# We need to map rockylinux repository names to the equivalent repositories
# in the source distro. To do that we look for known packages in each
# repository and see what repo they came from. We need to use repoquery for
# this which requires downloading the package, so we pick relatively small
# packages for this.
declare -g -A repo_map pkg_repo_map
declare -g -a managed_repos
pkg_repo_map=(
[baseos]=rootfiles.noarch
[appstream]=apr-util-ldap.$ARCH
[ha]=pacemaker-doc.noarch
[powertools]=libaec-devel.$ARCH
[extras]=epel-release.noarch
)
# [devel]=quota-devel.$ARCH
PRETTY_NAME=$(os-release PRETTY_NAME)
printf '%s\n' "${blue}Preparing to migrate $PRETTY_NAME to Rocky Linux 8.$nocolor"
printf '\n%s' "${blue}Determining repository names for $PRETTY_NAME$nocolor"
for r in "${!pkg_repo_map[@]}"; do
printf '.'
p=${pkg_repo_map[$r]}
repoquery "$p" || continue
repo_map[$r]=${repoquery_results[Repository]}
done
printf '%s\n' '' '' "Found the following repositories which map from $PRETTY_NAME to Rocky Linux 8:"
column -t -N "$PRETTY_NAME,Rocky Linux 8" < <(for r in "${!repo_map[@]}"; do
printf '%s %s\n' "${repo_map[$r]}" "$r"
done)
printf '\n%s' "${blue}Getting system package names for $PRETTY_NAME$nocolor."
# We don't know what the names of these packages are, we have to discover
# them via various means. The most common means is to look for either a
# distro-agnostic provides or a filename. In a couple of cases we need to
# jump through hoops to get a filename that is provided specifically by the
# source distro.
# Get info for each repository to determine which ones are subscription
# managed.
# system-release here is a bit of a hack, but it ensures that the
# rocky-repos package will get installed.
for r in "${!repo_map[@]}"; do
repoinfo "${repo_map[$r]}"
if [[ $r == "baseos" ]]; then
local baseos_filename=system-release
if [[ ! ${repoinfo_results[Repo-managed]} ]]; then
baseos_filename="${repoinfo_results[Repo-filename]}"
fi
local baseos_gpgkey="${repoinfo_results[Repo-gpgkey]}"
fi
if [[ ${repoinfo_results[Repo-managed]} ]]; then
managed_repos+=("${repo_map[$r]}")
fi
done
# First get info for the baseos repo
repoinfo "${repo_map[baseos]}"
declare -g -A pkg_map provides_pkg_map
declare -g -a addl_provide_removes addl_pkg_removes
provides_pkg_map=(
[rocky-backgrounds]=system-backgrounds
[rocky-indexhtml]=redhat-indexhtml
[rocky-repos]="$baseos_filename"
[rocky-logos]=system-logos
[rocky-gpg-keys]="$baseos_gpgkey"
[rocky-release]=system-release
)
addl_provide_removes=(
redhat-release-eula
)
for pkg in "${!provides_pkg_map[@]}"; do
printf '.'
prov=${provides_pkg_map[$pkg]}
pkg_map[$pkg]=$(provides_pkg $prov) ||
exit_message "Can't get package that provides $prov."
done
for prov in "${addl_provide_removes[@]}"; do
printf '.'
local pkg;
pkg=$(provides_pkg $prov) || continue
addl_pkg_removes+=("$pkg")
done
printf '%s\n' '' '' "Found the following system packages which map from $PRETTY_NAME to Rocky Linux 8:"
column -t -N "$PRETTY_NAME,Rocky Linux 8" < <(for p in "${!pkg_map[@]}"; do
printf '%s %s\n' "${pkg_map[$p]}" "$p"
done)
printf '%s\n' '' "${blue}Getting list of installed system packages$nocolor."
readarray -t installed_packages < <(rpm -qa --queryformat="%{NAME}\n" "${pkg_map[@]}")
declare -g -A installed_pkg_check installed_pkg_map
for p in "${installed_packages[@]}"; do
installed_pkg_check[$p]=1
done
for p in "${!pkg_map[@]}"; do
if [[ ${installed_pkg_check[${pkg_map[$p]}]} ]]; then
installed_pkg_map[$p]=${pkg_map[$p]}
fi
done;
printf '%s\n' '' "We will replace the following $PRETTY_NAME packages with their Rocky Linux 8 equivalents"
column -t -N "Packages to be Removed,Packages to be Installed" < <(
for p in "${!installed_pkg_map[@]}"; do
printf '%s %s\n' "${installed_pkg_map[$p]}" "$p"
done
)
if (( ${#addl_pkg_removes[@]} )); then
printf '%s\n' '' "In addition to the above the following system packages will be removed:" \
"${addl_pkg_removes[@]}"
fi
# Release packages that are part of SIG's should be listed below when they
# are available.
# UPDATE: We may or may not do something with SIG's here, it could just be
# left as a separate excersize to swap out the sig repos.
#sigs_to_swap=()
printf '%s\n' '' "${blue}Getting a list of enabled modules for the system repositories$nocolor."
# Get a list of system enabled modules.
readarray -t enabled_modules < <(
set -e -o pipefail
dnf -q "${repo_map[@]/#/--repo=}" module list --enabled |
awk '
$1 == "@modulefailsafe", /^$/ {next}
$1 == "Name", /^$/ {if ($1!="Name" && !/^$/) print $1":"$2}
' | sort -u
set +e +o pipefail
)
# Remove entries matching any excluded modules.
if (( ${#module_excludes[@]} )); then
printf '%s\n' '' "Excluding modules:" "${module_excludes[@]}"
local -A module_check='()'
local -a tmparr='()'
for m in "${module_excludes[@]}"; do
module_check[$m]=1
done
for m in "${enabled_modules[@]}"; do
if [[ ! ${module_check[$m]} ]]; then
tmparr+=("$m")
fi
done
enabled_modules=("${tmparr[@]}")
fi
printf '%s\n' '' "Found the following modules to re-enable at completion:" \
"${enabled_modules[@]}" ''
if (( ${#managed_repos[@]} )); then
printf '%s\n' '' "In addition, since this system uses subscription-manger the following managed repos will be disabled:" \
"${managed_repos[@]}"
fi
}
convert_info_dir=/root/convert
unset convert_to_rocky reinstall_all_rpms verify_all_rpms
usage() {
printf '%s\n' \
"Usage: ${0##*/} [OPTIONS]" \
'' \
'Options:' \
'-h displays this help' \
'-r Converts to rocky' \
'-V Verifies switch' \
' !! USE WITH CAUTION !!'
exit 1
} >&2
generate_rpm_info() {
mkdir /root/convert
printf '%s\n' "${blue}Creating a list of RPMs installed: $1$nocolor"
rpm -qa --qf "%{NAME}|%{VERSION}|%{RELEASE}|%{INSTALLTIME}|%{VENDOR}|%{BUILDTIME}|%{BUILDHOST}|%{SOURCERPM}|%{LICENSE}|%{PACKAGER}\n" | sort > "${convert_info_dir}/$HOSTNAME-rpm-list-$1.log"
printf '%s\n' "${blue}Verifying RPMs installed against RPM database: $1$nocolor" ''
rpm -Va | sort -k3 > "${convert_info_dir}/$HOSTNAME-rpm-list-verified-$1.log"
}
package_swaps() {
# Use dnf shell to swap the system packages out.
dnf -y shell --nogpg --disablerepo=\* --noautoremove \
--setopt=protected_packages= --setopt=keepcache=True \
"${repo_urls[@]/#/--repofrompath=}" <<EOF
remove ${installed_pkg_map[@]} ${addl_pkg_removes[@]}
install ${!installed_pkg_map[@]}
run
exit
EOF
# We need to check to make sure that all of the original system packages
# have been removed and all of the new ones have been added. If a package
# was supposed to be removed and one with the same name added back then
# we're kind of screwed for this check, as we can't be certain, but all the
# packages we're adding start with "rocky-*" so this really shouldn't happen
# and we can safely not check for it. The worst that will happen is a rocky
# linux package will be removed and then installed again.
local -a check_removed check_installed
readarray -t check_removed < <(
rpm -qa --qf '%{NAME}\n' "${installed_pkg_map[@]}" \
"${addl_pkg_removes[@]}" | sort -u
)
if (( ${#check_removed[@]} )); then
printf '%s\n' '' "${blue}Packages found on system that should still be removed. Forcibly removing them with rpm:$nocolor"
# Removed packages still found on the system. Forcibly remove them.
for pkg in "${check_removed[@]}"; do
printf '%s\n' "$pkg"
rpm -e --allmatches --nodeps "${check_removed[@]}" ||
rpm -e --allmatches --nodeps --noscripts --notriggers "$pkg"
done
fi
# Check to make sure we installed everything we were supposed to.
readarray -t check_installed < <(
{
printf '%s\n' "${!installed_pkg_map[@]}" | sort -u
rpm -qa --qf '%{NAME}\n' "${!installed_pkg_map[@]}" | sort -u
} | sort | uniq -u
)
if (( ${#check_installed[@]} )); then
printf '%s\n' '' "${blue}Some required packages were not installed by dnf. Attempting to force with rpm:$nocolor"
# Get a list of rpm packages to package names
local -A rpm_map
local -a file_list
for rpm in /var/cache/dnf/{rockybaseos,rockyappstream}-*/packages/*.rpm
do
rpm_map[$(
rpm -q --qf '%{NAME}\n' --nodigest "$rpm" 2>/dev/null
)]=$rpm
done
# Attempt to install.
for pkg in "${check_installed[@]}"; do
printf '%s\n' "$pkg"
if ! rpm -i --force --nodeps --nodigest "${rpm_map[$pkg]}" \
2>/dev/null; then
# Try to install the package in just the db, then clean it up.
rpm -i --force --justdb --nodeps --nodigest "${rpm_map[$pkg]}" \
2>/dev/null
# Get list of files that are still causing problems and donk
# them.
readarray -t file_list < <(
rpm -V "$pkg" 2>/dev/null | awk '$1!="missing" {print $2}'
)
for file in "${file_list[@]}"; do
rmdir "$file" ||
rm -f "$file" ||
rm -rf "$file"
done
# Now try re-installing the package to replace the missing
# files. Regardless of the outcome here we just accept it and
# move on and hope for the best.
rpm -i --reinstall --force --nodeps --nodigest \
"${rpm_map[$pkg]}" 2>/dev/null
fi
done
fi
# Distrosync
printf '%s\n' '' "${blue}Removing dnf cache$nocolor"
rm -rf /var/cache/{yum,dnf}
printf '%s\n' "${blue}Ensuring repos are enabled before the package swap$nocolor"
dnf -y config-manager --set-enabled "${!repo_map[@]}" || {
printf '%s\n' 'Repo name missing?'
exit 25
}
if (( ${#managed_repos[@]} )); then
# Filter the managed repos for ones still in the system.
readarray -t managed_repos < <(
dnf -q repolist "${managed_repos[@]}" | awk '$1!="repo" {print $1}'
)
if (( ${#managed_repos[@]} )); then
printf '%s\n' '' "${blue}Disabling subscription managed repos$nocolor."
dnf -y config-manager --disable "${managed_repos[@]}"
fi
fi
if (( ${#enabled_modules[@]} )); then
printf '%s\n' "${blue}Enabling modules$nocolor" ''
dnf -y module enable "${enabled_modules[@]}" ||
exit_message "Can't enable modules ${enabled_modules[@]}"
fi
# Make sure that excluded repos are disabled.
printf '%s\n' "${blue}Disabling excluded modules$nocolor" ''
dnf -y module disable "${module_excludes[@]}" ||
exit_message "Can't disable modules ${module_excludes[@]}"
printf '%s\n' '' "${blue}Syncing packages$nocolor" ''
dnf -y distro-sync || exit_message "Error during distro-sync."
}
## End actual work
noopts=0
while getopts "hrVR" option; do
(( noopts++ ))
case "$option" in
h)
usage
;;
r)
convert_to_rocky=true
;;
V)
verify_all_rpms=true
;;
*)
printf '%s\n' "${errcolor}Invalid switch.$nocolor"
usage
;;
esac
done
if (( ! noopts )); then
usage
fi
bin_check
if [[ $verify_all_rpms ]]; then
generate_rpm_info begin
fi
if [[ $convert_to_rocky ]]; then
collect_system_info
package_swaps
fi
if [[ $verify_all_rpms && $convert_to_rocky ]]; then
generate_rpm_info finish
printf '%s\n' "${blue}You may review the following files:$nocolor"
find /root/convert -type f -name "$HOSTNAME-rpms-*.log"
fi
printf '\n\n\n'
if [[ $convert_to_rocky ]]; then
cat /etc/issue | awk 'NR<=15'
printf '%s\n' "$blue" "Done, please reboot your system.$nocolor"
fi
logmessage