Added growpart element. It allows for growing specific partitions
during the deployment, which will result in less post deploy actions
needed for the server to be ready for use.
Change-Id: I6519fba3e8f1d078b99d3c03f2ac85f7b6e37d8a
A recent change that didn't fail with hard-tabs made me realise we're
not running tox -e pep8 ... which means we're not running dib-lint
which should find this (and other things).
I couldn't pinpoint when this happened; maybe job config was never in
this repo.
Anyway, move the pylint and dib-lint/flake8 testing to the now
standard "linters" and update the linting job to
openstack-tox-linters.
It looks like pylint is very lightly used (came in with
I7e24d8348db3aef79e1395d12692199a1f80161a and we've never expanded any
testing). Leave this alone for now, but probably it is not important
any more.
This revealed some issues; updated flake8
(Iaa19c36f8cab8482a01f764c588375db8e7d8be3) found some spacing issues
with keywords and an update to elrepo to match our standard bash
flags.
Change-Id: I45bf108c467f7c8190ca252e6c48450c2622aaf8
Starting with Fedora 36 the NetworkManager package no longer includes
ifcfg support by default. You need an additional package
"NetworkManager-initscripts-ifcfg-rh" to pull in the compatibility
plugin. Glean's support for Fedora relies on this compatibility system
so we install this package via the simple-init element package deps.
Change-Id: I76ac39b8dedcb1c5bc4595aedc0a732c99c8721e
This change extends the block device lvs attributes to allow creating
a volume which represents a thin pool, and to create volumes which are
allocated from this pool.
Change-Id: Ic58f55c36236cc8c6279fbcb708e27dc2982f2d5
This change enhances the growvols script to support all volumes being
backed by one thin provisioning pool.
If a pool is detected, the following occurs:
- validation to confirm every volume is backed by the pool
- only the pool is extended into the new partition
- volumes are extended by the same amount as the non thin-provisioned
case
This results in no volumes being over-provisioned, so
out-of-space behaviour will be the same as the non thin-provisioned
case.
This change also switches to using /dev/mapper device mapper paths for
volume block devices, since that is the only path the thin pool is
mapped to.
Change-Id: I96085fc889e72c942cfef7e3acb6f6cd73f606dd
It turns out we do need to create the machine-id for the same reason
as on 8. This was being hidden by the bootloader choosing the root
disk label from the host (see the dependent change).
Change I3b518802d681b888916a5cc6a3dcf7e1b537da1e has modified the
testing to use a different root-disk label, which should help catch
this in the fututure.
Depends-On: https://review.opendev.org/c/zuul/nodepool/+/853574
Change-Id: I64de66cac25fd2e051780fb4812e075c647eb76e
--root-label was added with I596104d1a63b5dc6549e8460a1ae3da00165ef04
This sets the ROOT_LABEL environment variable.
Over the years how this deploys has become more complex; now this
value gets written into DIB_BLOCK_DEVICE_PARAMS_YAML default values,
which is then loaded into DIB_ROOT_LABEL.
To override this from the environment you need to specify a full
DIB_BLOCK_DEVICE_CONFIG -- we don't have a way to just merge in the
root label setting.
Using the command-line argument is difficult with tools like nodepool
where the command-line is baked into something else. However we
already have methods for overriding environment variables on dib
calls.
Several of the other variables here accept default values from the
environment, so this is not an outlier. Making ROOT_LABEL also do
this allows us to test with non-default root devices in the gate (see
the linked change).
Change-Id: Ia1ef48c24841a86f387ff9603c64fd23d8670193
Needed-By: https://review.opendev.org/c/zuul/nodepool/+/853574
Without this change, the final unmount will timeout after the
rollbacks are called when the partitioning fails due to a user error.
dmsetup remove is called both for partition and LVM volume devices.
Change-Id: I99679ea00338d4018a95d4da9b21685161cd5049
This commit fixes wrong name of yum.conf files
on CentOS 9 Stream in centos element to correct ones.
Change-Id: I25f0661fa79b7bc8ac1b8e3b2831a413c4161d1d
The opensuse qcow2 image seems to regularly have a mismatch with its
sha256sum file. Possibly because these are being served by different
mirrors and are out of sync with each other? I have been able to
reproduce this locally downloading each file and comparing the resutling
hash.
Change-Id: Ic849f5b2afa488d9518065084112f8fc6e3083b2
openEuler 20.03-LTS-SP2 was out of date in May 2022. 22.03 LTS
is the newest LTS version. It was release in March 2022 and
will be maintained for 2 years. This patch upgrades the LTS
version. It'll be used in Devstack, Kolla-ansible and so on
in CI jobs.
This patch also enables the YUM mirror to speed up the package
download.
Change-Id: Iba38570d96374226b924db3aca305f7571643823
Somewhere between the upstream container
rockylinux/rockylinux:8.6.20220515 and the latest release, systemd
started to be pre-installed in the container.
With <= 20220515 installing the kernel-core package would end up
pulling in systemd. As part of the systemd package installation, the
/etc/machine-id file is created and populated.
The kernel package post-install steps install the kernel with
/bin/kernel-install; this is responsible for copying the kernel
binaries into /boot. It does this based on the machine-id, and it
seems its failure case with a blank machine-id is to simply skip
copying the kernels into /boot. To compound this problem, it seems
our bootloader installation doesn't notice that we don't have a kernel
installed, so we end up building an unbootable image.
Testing is/was showing us this; but as rocky is non-voting and this
occured at a random time (rather than in response to a dib change) I
think it slipped by us.
To work around this, create the machine-id early in the container. We
already have paths that remove the machine-id from final images.
Change-Id: I07e8262102d4e76c861667a98ded9fc3f4f4b82d
I think that generally this is a lot of noise in the logs, as the
internals of cache-url is well tested, so we don't need to trace log
by default.
Change-Id: I25b5a1ec0d8f99691b2b4b62b9fdd537e5a773e4
This is a squash of two changes that have unfortunately simultaneously
broken the gate.
The functests are failing with
sha256sum: bionic-server-cloudimg-amd64.squashfs.manifest: No such file or directory
I think what has happened here is that the SHA256 sums file being used
has got a new entry "bionic-server-cloudimg-amd64.squashfs.manifest"
which is showing up in a grep for
"bionic-server-cloudimg-amd64.squashfs". sha256 then tries to also
check this hash, and has started failing.
To avoid this, add an EOL marker to the grep so it only matches the
exact filename.
Change I7fb585bc5ccc52803eea107e76dddf5e9fde8646 updated the
containerfile tests to Jammy and it seems that cgroups v2 prevents
podman running inside docker [1]. While we investigate, move this
testing back to focal.
[1] https://github.com/containers/podman/issues/14884
Change-Id: I1af9f5599168aadc1e7fcdfae281935e6211a597
Gentoo can manage python versions itself. Before this commit users were
forced to set python versions themselves. Now they have the option to
set it if they wish.
The workaround needed for git is also no longer needed, so it's been
removed.
Change-Id: I06b259ef73a40df6b8ab92a5b424bffcf4ef764d
Signed-off-by: Matthew Thode <mthode@mthode.org>
The block device lvm lvs `size` attribute was passed directly to
lvcreate, so using units M, G means base 2. All other block device
size values are parsed with accepted conventions of M, B being base 10
and MiB, GiB being base 2.
lvm lvs `size` attributes are now parsed the same as other size
attributes. This improves consistency and makes it practical to
calculate volume sizes to fill the partition size. This means existing
size values will now create slightly smaller volumes. Previous sizes
can be restored by changing the unit to MiB, GiB, or increasing the
value for a base 10 unit.
The impact on this change should be minimal, the only known uses of lvm
volumes (TripleO, and element block-device-efi-lvm) uses extents
percentage instead of size. The smaller sizes can always be increased
after deployment.
Requested sizes will also be rounded down to align with physical
extents (4MiB). Previously specifying a value which did not align on
4MiB would consume an extra extent which could unexpectedly consume
more than the partition size.
Change-Id: Ia109cc5105071d82cc895d8d9cb85bc47da20a7a
All indication in CI is that Centos Stream9's use of dhclient
appears to point to compatability issues when interacting with
dnsmasq. However, this doesn't appear to be the issue with the
internal dhcp client. As such, lets constraint the RH default
so that it no longer applies to Centos 9-stream.
I've also added a documentation entry for DIB_DHCP_CLIENT which
was previously undocumented.
As an aside, I've already reached out to RH's NetworkManager team
regarding this, but root cause is not entirely understood at this
point.
Change-Id: I235f75b385a8b0348c8fe064038c51409f8722c4
Story: 2010109
Task: 45677
Creating a separate /boot partition is desirable in some cases[1].
This change detects if /boot is a partition, and ensures that the
kernel/ramdisk paths are correct in either case. This is applied to
all BLS entries files, whether they were generated by the previous
grub2-mkconfig call or in the source image.
This means the rhel9 specific workaround can be removed since all
paths are now normalised at this stage.
[1] https://review.opendev.org/c/openstack/tripleo-image-elements/+/846807
Change-Id: I62120ec8c65876e451532d2654d37435eb3606a6
Resolves: rhbz#2101514
