Commit Graph

788 Commits

Author SHA1 Message Date
Adam Williamson
666cac410a Add another variant KDE notification needle
More font size changes.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-13 16:01:17 -08:00
Adam Williamson
0498f4db94 Use 30s timeout on the check_screen in the workaround
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-13 15:29:35 -08:00
Adam Williamson
b3f51e6108 Gah come back missing bracket
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-13 15:23:50 -08:00
Adam Williamson
1f7e5ebe20 Attempt a workaround for RHBZ#1659266
This is breaking the memory_check tests. I just reproduced it
manually and the UI *does* come back to life if you wait some
time; let's see if we can work around the bug this way.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-13 15:15:49 -08:00
Adam Williamson
5f014de08a Add new KDE desktop notification needle variant
Font got bigger, or smaller, or something.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-13 14:22:59 -08:00
Adam Williamson
12e103e3da Factor meat out of advisory_post and do it in postfail too
If an update test fails before reaching advisory_post, we don't
generate the 'what update packages were installed' and 'were
any update packages *not* installed when they should have been'
logs, but these may well be useful for diagnosing the failure -
so let's also do the same stuff there. Only let's not do it all
twice.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-12 22:17:29 -08:00
Adam Williamson
764c6dbd95 Notice when update package should have been installed but wasn't
We hit an interesting case in update testing recently:

https://bodhi.fedoraproject.org/updates/FEDORA-2018-115068f60e

An earlier version of that update failed testing. When we dug
into it a bit, we found that the test was failing because an
earlier version of the `pki-server` package was installed than
the version that was in the update; when asked (as part of
FreeIPA deployment) to install it, dnf had noticed that there
were dependency issues with the version of the package from the
update, but it happened to be able to install the version from
the frozen 'stable' repo...so it just went ahead and did that.

In this case, the 'missed' package resulted in a test failure,
but it'd actually be possible for this to happen and the test
to complete; we really ought to notice when this happens, and
treat it as a test failure.

So what this attempts to do is: at the end of all update tests,
check for all installed packages with the same name as a package
from the update, and compare their full NEVR to the one of the
package from the update. If a package with the same name as one
of the update packages is installed, but does not appear to be
the *same NEVR*, we fail, and upload the lists of packages for
manual investigation as to what the heck's going on.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-12 22:17:29 -08:00
Adam Williamson
fe49095901 Add a couple of new Japanese needles
Translations changed.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-12 22:16:57 -08:00
Adam Williamson
59ec361700 Temporarily disable modularity_update_norepo subtest
This is known to not work at present as it's not implemented in
DNF yet; failing on it every day isn't proving much. Once it's
implemented (expected by end Jan) we can turn it back on again.
See https://bugzilla.redhat.com/show_bug.cgi?id=1616167

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-12 22:13:20 -08:00
Adam Williamson
65b4755358 Simplify anaconda error screen handling, add new needle
There's really no point having separate error and error_report
needles. Just match on error_report as well as clicking on it.
Also add a new error_report needle for latest Rawhide fonts.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-12 22:06:20 -08:00
Adam Williamson
0639468de6 Use -l for systemctl status (to avoid ellipsization)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-12 12:36:21 -08:00
Adam Williamson
cb035c7737 Still fixing up this serial logging stuff
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-12 12:28:23 -08:00
Adam Williamson
95b227b97a Sigh, fix a syntax error in previous commit
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-12 11:57:53 -08:00
Adam Williamson
0f5281f389 In post_fail_hooks, try using serial line if no network
Sometimes we get a test failing because the SUT isn't connecting
to the network for some reason. In this case we never get any
logs, because `upload_logs` relies on being able to reacht at
least the worker host system via the network.

This attempts to detect when we can't ping the worker host, and
in that case, send some info out over the serial line instead.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-12 11:40:58 -08:00
Adam Williamson
2f2f0973ec Update shrink disk image names in templates
We weren't using the gpt-labelled one, so I took it out of
createhdds; that makes the name of the mbr-labelled one lose
its label tag, so we need to update that name here.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-12-01 09:05:48 -08:00
Adam Williamson
e76ad4bbc1 Crank sss debuglevel up to 9, and also do it for cockpit test
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-30 14:58:53 -08:00
Adam Williamson
25d8b56fe9 Drop 'get_milestone' from utils (it's unimplemented and unused)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-30 14:22:08 -08:00
Adam Williamson
56060ff8bd Simplify and improve how we get to 'linux' line in grub
That whole creaky edifice of conditionals that figured out how
many times to press 'down' was a mess I always hated, and I just
found out that the fix for BLS wasn't complete - I'd assumed in
writing it that systems weren't being migrated to BLS on upgrade
to F30, but actually they are. This makes that design very hard
as we'd have had to find a way to change the number of 'down'
presses part-way through update tests, and all the ways I can
think of to do that would've made this even sillier.

Happily I managed to come up with what looks like a much simpler
approach: just go from the bottom. It seems that in every setup
I can think of to check - all three arches, BLS, no BLS, pre-
install, post-install - the linux line is two lines up from the
bottom of the config stanza (the last line is blank, and the
last line but one is the initramfs line). So we can just press
down 50 times (to make damn sure we're at the bottom) then press
up twice and we should be in the right place, no matter the arch,
the release, or if BLS is in use or not. Whew.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-30 14:17:01 -08:00
Adam Williamson
0d54e222f7 Pull in the update that fixes the FreeIPA / authselect bug
This bug is breaking all update FreeIPA tests; until the updates
go stable, let's pull them in to update tests so the results
are useful.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-28 17:42:58 -08:00
Adam Williamson
7dc50d3285 Drop no-longer-needed F29 update test hotfix
The update went stable months ago.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-27 17:30:25 -08:00
Adam Williamson
77afbad45e Fix up aarch64 UEFI vars to something that works
fd files don't work on aarch64, it seems. Drop BIOS even though
it's probably not breaking anything as I don't intend to move
aarch64 to prod until prod is up to new openQA, so no need to
stay compatible.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-20 22:40:22 -08:00
Adam Williamson
b802ea9401 Update how we specify SCSI device variables
In recent os-autoinst the old 'stuff it all in HDDMODEL' doesn't
work and tells you to do it like this. This way does work in the
older os-autoinst currently on prod too, so this should be fine.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-20 22:26:50 -08:00
Adam Williamson
e870e43a08 Add new-style UEFI firmware vars to machine templates
We're about to deploy recent os-autoinst to staging. The UEFI
stuff got rewritten since the version we currently have, and
this is now the recommended way to handle UEFI firmware. The
new vars shouldn't confuse the old code still deployed on prod,
it should just ignore these vars and keep working off the old
'UEFI=1' (which causes it to autodetect the file locations).

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-19 12:41:08 -08:00
Adam Williamson
0eaddd1215 Add some new variant needles for the FreeIPA web UI
Looks like they changed capitalization...

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-15 18:22:35 -08:00
Adam Williamson
a10867d4fc Add new variant French 'install done' needle
Translation changed again, I think.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-15 12:47:50 -08:00
Adam Williamson
d6f26403a6 Use different file for checking post-upgrade release version
The one we were using before doesn't seem to exist any more in
Rawhide. /etc/os-release should be fine.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-15 12:46:24 -08:00
Adam Williamson
9d50f4f4a8 Tweak bootloader handling for BLS
Now the BLS stuff is enabled in Rawhide, we need to press 'down'
a different number of times to reach the 'linux' line when
editing the boot params (I really, really wish there was a
better way to do this :<). It gets tricky as there are all sorts
of cases here (support_server tests use a CURRREL disk image,
and then there's upgrade tests)...I think this covers things for
now.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-15 12:06:56 -08:00
Adam Williamson
5a2e8f20a7 Add new variant French Rawhide accept fate needle
Translation changed.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-09 17:42:48 -08:00
Adam Williamson
d76003a6fb Add a new needle for the KDE desktop notifications test
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-09 17:41:49 -08:00
Adam Williamson
11e34f57c1 Bump version of support server disk image
We made it bigger.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-09 17:16:36 -08:00
Adam Williamson
14ad5b97f1 Still try and upload testedpkgs even if comm 'fails'
From local experimentation, it still actually produces the
output, even though it prints the message about the order being
wrong and exits 1.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-08 17:46:45 -08:00
Adam Williamson
ddf6ba5a6b update tests: don't fail if comm is unhappy about the alphabet
Weirdly, occasionally some update tests seem to fail because
the 'comm' util we use to produce the list of packages from the
update that were actually tested during the job doesn't think
one of the input files is in alphabetical order, even though we
sort them both when they're produced. I don't know if this is
possibly due to the definition of 'alphabetical order' changing
as part of the update, or what. But we really shouldn't *fail*
the test when this happens, as it's not part of the functional
test, we're just producing convenience data. So, let's handle
the command failing, and if it happens, upload the input files
so we can maybe figure out why it's unhappy...

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-11-08 16:59:06 -08:00
Lukas Ruzicka
b999ee93fe Add new needles to utilize Arabic tests (Fixes #83).
Add needles to utilize the Arabic test.

Add rest of the needles.
2018-11-01 15:30:03 +01:00
Lukas Ruzicka
8190c2a0eb Add needles to utilize the Cyrilic installation test. 2018-11-01 14:48:03 +01:00
Adam Williamson
6ddb475928 RHBZ#1644919: allow longer for console login, with a soft fail
Since a recent sssd update, console login during FreeIPA tests
is taking unusually long. We don't want this to fail all the
tests, so let's extend the timeout, but with a soft fail.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-31 16:33:32 -07:00
Adam Williamson
70ef3404f0 Tweak previous commit to avoid some bugs
The previous commit would lead to the 'workaround' getting hit
incorrectly, and might have had some other issues...tweak it a
bit.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-31 12:45:11 -07:00
Adam Williamson
fd753b2e3a Handle split of 'download' and 'apply' phases in gnome-software
GNOME Software 3.30.5 split the offline update process into two
separate 'download' and 'apply' phases. So we need to handle
clicking 'download' before 'apply', if that happens.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-31 11:50:14 -07:00
Adam Williamson
e6c8c5f0ff Work around Firefox 'close multiple tabs' warning
Somehow, recently, FreeIPA tests are running into Firefox not
quitting because it's showing a warning about closing multiple
tabs. (I think we didn't *get* multiple tabs before but now we
do, for some reason). So let's work around this by clicking
"Close tabs" if the warning appears.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-30 18:34:37 -07:00
Adam Williamson
d4c87a4f36 Handle rename of AtomicWorkstation to Silverblue
We updated the dispatcher code, but not the templates...so we
didn't have any actual tests to run on Silverblue images. Let's
fix that. Note this means we won't test F28 and earlier images
that still have 'AtomicWorkstation' as their subvariant any
more, unless I set up some sorta workaround in the dispatcher.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-27 12:51:20 +09:00
Adam Williamson
abecb62785 Switch to std graphics to avoid vt/splash issues
Time for the great video driver merry-go-round again...lately
we're having some issues with vt corruption and rendering over
the boot splash, let's try using 'std' driver to see if it
helps a bit. stg has been set up this way for a couple of days
and it's not blowing up at least.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-13 17:03:44 -07:00
Adam Williamson
86eaf0cd48 Remove no-longer-used 'uptodate' needle
Since we tweaked the g-s workaround not to use this any more, we
don't need it.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-12 22:11:35 -07:00
Adam Williamson
129d1316a6 Fix tty switching for desktop_notifications
Lately, we can't be sure the desktop will be on tty1 after we
do 'systemctl isolate graphical.target'. For recent Workstation
lives it actually shows up on tty2.

We could be 'clever' and switch to tty2 on F29+ Workstation
lives...but actually it seems like if we just don't do anything,
systemd switches us to the correct tty. So let's rely on that,
at least as long as it's working.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-12 21:16:33 -07:00
Adam Williamson
0f1d0a1228 Add new Japanese needles
Seems the installer Japanese font changed.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-12 21:01:07 -07:00
Adam Williamson
22c0b5bc04 Disable hidden grub menu for uploaded base installs
At least one test (desktop_notifications_postinstall) boots from
the disk image uploaded by install_default_upload, and needs to
access the grub menu. On F29+ Workstation this is failing,
because the grub menu is now hidden by default, so when the test
boots, it never sees the bootloader screen, and fails.

I considered trying to teach it to hold down shift or hit f8 or
esc at the right time, but that seems like it might be hard. So
instead let's just try to disable the hidden menu when we're
about to upload the installed system image. This is kinda going
against the 'preserve natural system behaviour' principle we try
to use for openQA, but I think it's OK as we do have other tests
that will exercise the 'hidden boot menu' stuff to some extent.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-12 15:36:55 -07:00
Adam Williamson
17b6d9f708 Tweak the workaround to work for F27 too
On F27 we don't get a 'Software is up to date' screen because
there's an upgrade available. Let's work with the refresh button
instead.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-11 22:23:53 -07:00
Adam Williamson
17911efcce Add a new variant needle for GNOME reboot confirm screen
Seems none of the existing needles matches on current F28 update
tests.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-11 16:44:41 -07:00
Adam Williamson
63d8f34a0e Tweak the workaround loop a bit, refresh the comments
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-11 16:18:04 -07:00
Adam Williamson
db4ab638da Restore modified version of the #1314991 workaround for #1638563
We're not seeing *exactly* #1314991 any more, but we're seeing
something that looks quite similar: the first attempt to find
updates just doesn't find any. No error message, no updates. I
have reported a bug for this and am investigating it, in the
meantime, let's restore the workaround, elaborated a bit, and
looking for the 'Software is up to date' screen instead of the
error message.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-11 16:07:58 -07:00
Adam Williamson
25ad8a6aeb Drop workaround for #1314991, it doesn't work any more
I rather suspect the *bug* is still basically present and it's
why this test often fails, but we no longer seem to see the
*error message* which lets us detect the bug happening. This
needle has not been hit by any test for six months. So let's
remove the workaround as it adds complexity.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-10 13:45:51 -07:00
Adam Williamson
6f1d9565d7 Add a temp hotfix for #1636633 for F29 update tests
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-10-09 16:40:31 -07:00