lib/utils.pm

@@ -386,13 +386,12 @@ sub boot_decrypt {
 
 sub check_release {
     # Checks whether the installed release matches a given value. E.g.
-    # `check_release(23)` checks whether the installed system is
-    # Fedora 23. The value can be 'Rawhide' or a Fedora release
-    # number; often you will want to use `get_var('VERSION')`. Expects
+    # `check_release(8.4)` checks whether the installed system is
+    # Rocky Linux 8.4. Often you will want to use `get_var('VERSION')`. Expects
     # a console prompt to be active when it is called.
     my $release = shift;
     my $check_command = "grep SUPPORT_PRODUCT_VERSION /etc/os-release";
-    validate_script_output $check_command, sub { $_ =~ m/REDHAT_SUPPORT_PRODUCT_VERSION=$release/ };
+    validate_script_output $check_command, sub { $_ =~ m/ROCKY_SUPPORT_PRODUCT_VERSION=$release/ };
 }
 
 sub disable_firefox_studies {

main.pm

@@ -171,6 +171,17 @@ sub load_install_tests() {
     if (get_var('ANACONDA_STATIC')) {
         autotest::loadtest "tests/_anaconda_network_static.pm";
     }
+    else {
+        autotest::loadtest "tests/_anaconda_network_enable.pm";
+    }
+
+    ## Kdump
+    if (get_var('ANACONDA_KDUMP') eq 'enabled') {
+        autotest::loadtest "tests/_anaconda_kdump_enable.pm";
+    }
+    else {
+        autotest::loadtest "tests/_anaconda_kdump_disable.pm";
+    }
 
     ## Installation source
     if (get_var('MIRRORLIST_GRAPHICAL') || get_var("REPOSITORY_GRAPHICAL")) {

needles/anaconda/network/rocky-anaconda_network_address_add-20210813.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "width": 35,
+      "xpos": 806,
+      "type": "match",
+      "ypos": 327,
+      "height": 18
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_network_address_add"
+  ]
+}

needles/anaconda/network/rocky-anaconda_network_connect-20210813.json

@@ -0,0 +1,27 @@
+{
+  "area": [
+    {
+      "xpos": 595,
+      "ypos": 133,
+      "width": 83,
+      "height": 17,
+      "type": "match"
+    },
+    {
+      "xpos": 909,
+      "ypos": 114,
+      "width": 69,
+      "height": 17,
+      "type": "match",
+      "click_point": {
+        "xpos": 17.5,
+        "ypos": 7.5
+      }
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_network_connect"
+  ]
+}

needles/anaconda/network/rocky-anaconda_network_connected-20210813.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "ypos": 133,
+      "type": "match",
+      "xpos": 576,
+      "width": 66,
+      "height": 17
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_network_connected"
+  ]
+}

needles/anaconda/network/rocky-anaconda_network_ipv4-20210813.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "height": 17,
+      "width": 89,
+      "xpos": 635,
+      "type": "match",
+      "ypos": 205
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_network_ipv4"
+  ]
+}

needles/anaconda/network/rocky-anaconda_network_method-20210813.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "height": 15,
+      "xpos": 155,
+      "type": "match",
+      "width": 342,
+      "ypos": 255
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_network_method"
+  ]
+}

needles/anaconda/network/rocky-anaconda_network_method_manual-20210813.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "height": 16,
+      "width": 52,
+      "type": "match",
+      "xpos": 223,
+      "ypos": 312
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_network_method_manual"
+  ]
+}

needles/anaconda/network/rocky-network_configure-20210813.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "height": 19,
+      "ypos": 619,
+      "width": 74,
+      "xpos": 901,
+      "type": "match"
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_network_configure"
+  ]
+}

needles/anaconda/network/rocky-network_host_name-20210813.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "height": 34,
+      "width": 34,
+      "type": "match",
+      "xpos": 721,
+      "ypos": 340
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_main_hub_network_host_name"
+  ]
+}

needles/anaconda/network/rocky-network_host_name-20210814.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "height": 34,
+      "ypos": 340,
+      "width": 34,
+      "xpos": 721,
+      "type": "match"
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_main_hub_network_host_name"
+  ]
+}

needles/anaconda/network/rocky-network_host_name_connected-20210815.json

@@ -0,0 +1,22 @@
+{
+  "area": [
+    {
+      "height": 14,
+      "type": "match",
+      "width": 70,
+      "xpos": 724,
+      "ypos": 362
+    },
+    {
+      "xpos": 829,
+      "ypos": 363,
+      "width": 71,
+      "height": 13,
+      "type": "match"
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky"
+  ]
+}

needles/anaconda/network/rocky-network_host_name_not_connected-20210815.json

@@ -0,0 +1,20 @@
+{
+  "area": [
+    {
+      "xpos": 718,
+      "ypos": 361,
+      "width": 130,
+      "height": 16,
+      "type": "match",
+      "click_point": {
+        "xpos": 17,
+        "ypos": 1.5
+      }
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_main_hub_network_host_name_not_connected"
+  ]
+}

needles/anaconda/network/rocky-network_host_name_not_connected_with_warning-20210816.json

@@ -0,0 +1,20 @@
+{
+  "area": [
+    {
+      "height": 16,
+      "xpos": 718,
+      "click_point": {
+        "xpos": 17,
+        "ypos": 1.5
+      },
+      "type": "match",
+      "width": 130,
+      "ypos": 361
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_main_hub_network_host_name_not_connected"
+  ]
+}

needles/anaconda/partitioning/rocky-add_mountpoint-20210814.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "width": 109,
+      "xpos": 547,
+      "type": "match",
+      "ypos": 465,
+      "height": 17
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_part_add_mountpoint"
+  ]
+}

needles/anaconda/partitioning/rocky-device_reformat-20210814.json

@@ -0,0 +1,20 @@
+{
+  "area": [
+    {
+      "height": 21,
+      "width": 79,
+      "xpos": 608,
+      "type": "match",
+      "ypos": 359,
+      "click_point": {
+        "xpos": 10.5,
+        "ypos": 9.5
+      }
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_part_device_reformat"
+  ]
+}

needles/anaconda/partitioning/rocky-device_root_resized_twelve-20210814.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "height": 22,
+      "ypos": 139,
+      "xpos": 394,
+      "type": "match",
+      "width": 74
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "device_root_resized_twelve"
+  ]
+}

needles/anaconda/partitioning/rocky-fs_ext4-20210813.json

@@ -0,0 +1,15 @@
+{
+  "area": [
+    {
+      "ypos": 270,
+      "width": 34,
+      "xpos": 505,
+      "type": "match",
+      "height": 19
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "anaconda_part_fs_ext4"
+  ]
+}

needles/anaconda/partitioning/rocky-mountpoint_selected-20210814.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "height": 25,
+      "width": 87,
+      "xpos": 497,
+      "type": "match",
+      "ypos": 126
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_part_mountpoint_selected"
+  ]
+}

needles/anaconda/partitioning/rocky-partition_add-20210814.json

@@ -0,0 +1,20 @@
+{
+  "area": [
+    {
+      "xpos": 26,
+      "ypos": 627,
+      "width": 49,
+      "height": 15,
+      "type": "match",
+      "click_point": {
+        "xpos": 24.5,
+        "ypos": 7.5
+      }
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_part_add"
+  ]
+}

needles/anaconda/partitioning/rocky-scheme_lvm-20210813.json

@@ -0,0 +1,18 @@
+{
+  "area": [
+    {
+      "ypos": 242,
+      "xpos": 64,
+      "type": "match",
+      "width": 33,
+      "height": 18
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "ENV-FLAVOR-server",
+    "LANGUAGE-english",
+    "anaconda_part_scheme_lvm"
+  ]
+}

needles/anaconda/partitioning/rocky-scheme_standard-20210814.json

@@ -0,0 +1,18 @@
+{
+  "area": [
+    {
+      "type": "match",
+      "xpos": 61,
+      "width": 115,
+      "ypos": 212,
+      "height": 20
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "ENV-FLAVOR-server",
+    "LANGUAGE-english",
+    "anaconda_part_scheme_standard"
+  ]
+}

needles/anaconda/partitioning/rocky-select_root-20210813.json

@@ -1,23 +1,17 @@
 {
   "area": [
     {
-      "xpos": 44,
-      "ypos": 136,
-      "width": 84,
-      "height": 20,
-      "type": "match"
-    },
-    {
-      "xpos": 494,
-      "ypos": 151,
-      "width": 47,
-      "height": 23,
-      "type": "match"
+      "ypos": 134,
+      "width": 79,
+      "xpos": 41,
+      "type": "match",
+      "height": 21
     }
   ],
   "properties": [],
   "tags": [
     "ENV-DISTRI-rocky",
+    "ENV-FLAVOR-server",
     "anaconda_part_select_root"
   ]
 }

needles/anaconda/partitioning/rocky-update_settings-20210813.json

@@ -0,0 +1,18 @@
+{
+  "area": [
+    {
+      "ypos": 573,
+      "width": 98,
+      "type": "match",
+      "xpos": 882,
+      "height": 20
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "ENV-FLAVOR-server",
+    "LANGUAGE-english",
+    "anaconda_part_update_settings"
+  ]
+}

needles/anaconda/partitioning/rocky-use_current-20210814.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "ypos": 321,
+      "width": 91,
+      "xpos": 39,
+      "type": "match",
+      "height": 18
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_part_use_current"
+  ]
+}

needles/cockpit/rocky-autoupdate_planned_day-20210814.json

@@ -0,0 +1,15 @@
+{
+  "area": [
+    {
+      "ypos": 341,
+      "width": 71,
+      "xpos": 546,
+      "type": "match",
+      "height": 19
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "autoupdate_planned_day"
+  ]
+}

needles/cockpit/rocky-cockpit_login-20210814.json

@@ -0,0 +1,15 @@
+{
+  "area": [
+    {
+      "height": 77,
+      "ypos": 164,
+      "width": 232,
+      "type": "match",
+      "xpos": 572
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "cockpit_login"
+  ]
+}

needles/cockpit/rocky-cockpit_login-notab-20210814.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "xpos": 572,
+      "type": "match",
+      "width": 232,
+      "ypos": 179,
+      "height": 77
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "cockpit_login"
+  ]
+}

needles/cockpit/rocky-cockpit_updates_auto_all-20210814.json

@@ -0,0 +1,19 @@
+{
+  "area": [
+    {
+      "type": "match",
+      "ypos": 287,
+      "click_point": {
+        "ypos": 8,
+        "xpos": 8
+      },
+      "width": 43,
+      "xpos": 535,
+      "height": 19
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "cockpit_updates_auto_all"
+  ]
+}

needles/firefox/rocky-firefox_close_tabs-20210814.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "height": 14,
+      "width": 70,
+      "xpos": 674,
+      "type": "match",
+      "ypos": 420
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "firefox_close_tabs"
+  ]
+}

needles/kdump/rocky-anaconda_kdump_disable-20210813.json

@@ -0,0 +1,20 @@
+{
+  "area": [
+    {
+      "xpos": 10,
+      "ypos": 130,
+      "width": 111,
+      "height": 26,
+      "type": "match",
+      "click_point": {
+        "xpos": 12.5,
+        "ypos": 13
+      }
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_kdump_disable"
+  ]
+}

needles/kdump/rocky-anaconda_kdump_disabled-20210813.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "xpos": 15,
+      "ypos": 136,
+      "width": 106,
+      "height": 17,
+      "type": "match"
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_kdump_disabled"
+  ]
+}

needles/kdump/rocky-anaconda_kdump_enable-20210813.json

@@ -0,0 +1,20 @@
+{
+  "area": [
+    {
+      "xpos": 10,
+      "ypos": 130,
+      "width": 111,
+      "height": 26,
+      "type": "match",
+      "click_point": {
+        "xpos": 12.5,
+        "ypos": 13
+      }
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_kdump_enable"
+  ]
+}

needles/kdump/rocky-anaconda_main_hub_kdump-20210813.json

@@ -0,0 +1,16 @@
+{
+  "area": [
+    {
+      "xpos": 719,
+      "ypos": 265,
+      "width": 16,
+      "height": 43,
+      "type": "match"
+    }
+  ],
+  "properties": [],
+  "tags": [
+    "ENV-DISTRI-rocky",
+    "anaconda_main_hub_kdump"
+  ]
+}

templates.fif.json

@@ -271,17 +271,6 @@
                 "USER_LOGIN": "qwerty"
             }
         },
-        "install_blivet_btrfs": {
-            "profiles": {
-                "rocky-universal-x86_64-*-64bit": 40,
-                "rocky-universal-x86_64-*-uefi": 41
-            },
-            "settings": {
-                "PARTITIONING": "custom_blivet_btrfs",
-                "POSTINSTALL": "disk_custom_btrfs_postinstall",
-                "ROOT_PASSWORD": "weakpassword"
-            }
-        },
         "install_blivet_lvmthin": {
             "profiles": {
                 "rocky-universal-x86_64-*-64bit": 40,
@@ -293,28 +282,6 @@
                 "ROOT_PASSWORD": "weakpassword"
             }
         },
-        "install_blivet_btrfs_preserve_home": {
-            "profiles": {
-                "rocky-dvd-iso-x86_64-*-64bit": 40
-            },
-            "settings": {
-                "PARTITIONING": "custom_blivet_btrfs_preserve_home",
-                "HDD_1": "disk_f%CURRREL%_desktop_4_%ARCH%.img",
-                "POSTINSTALL": "btrfs_preserve_home_check_content",
-                "ROOT_PASSWORD": "weakpassword"
-            }
-        },
-        "install_blivet_btrfs_preserve_home_uefi": {
-            "profiles": {
-                "rocky-dvd-iso-x86_64-*-uefi": 40
-            },
-            "settings": {
-                "PARTITIONING": "custom_blivet_btrfs_preserve_home",
-                "HDD_1": "disk_f%CURRREL%_minimal-uefi_3_%ARCH%.img",
-                "POSTINSTALL": "btrfs_preserve_home_check_content",
-                "ROOT_PASSWORD": "weakpassword"
-            }
-        },
         "install_blivet_lvm_ext4": {
             "profiles": {
                 "rocky-dvd-iso-x86_64-*-64bit": 40,
@@ -370,39 +337,6 @@
                 "ROOT_PASSWORD": "weakpassword"
             }
         },
-        "install_btrfs": {
-            "profiles": {
-                "rocky-universal-x86_64-*-64bit": 40,
-                "rocky-universal-x86_64-*-uefi": 41
-            },
-            "settings": {
-                "PARTITIONING": "custom_btrfs",
-                "ROOT_PASSWORD": "weakpassword"
-            }
-        },
-        "install_btrfs_preserve_home": {
-            "profiles": {
-                "rocky-dvd-iso-x86_64-*-64bit": 10
-            },
-            "settings": {
-                "PARTITIONING": "custom_btrfs_preserve_home",
-                "INSTALL": 1,
-                "ROOT_PASSWORD": "weakpassword",
-                "POSTINSTALL": "btrfs_preserve_home_check_content",
-                "HDD_1": "disk_f%CURRREL%_desktop_4_%ARCH%.img"
-            }
-        },
-        "install_btrfs_preserve_home_uefi": {
-            "profiles": {
-                "rocky-dvd-iso-x86_64-*-uefi": 41
-            },
-            "settings": {
-                "PARTITIONING": "custom_btrfs_preserve_home",
-                "HDD_1": "disk_f%CURRREL%_minimal-uefi_3_%ARCH%.img",
-                "POSTINSTALL": "btrfs_preserve_home_check_content",
-                "ROOT_PASSWORD": "weakpassword"
-            }
-        },
         "install_cyrillic_language": {
             "profiles": {
                 "rocky-universal-x86_64-*-64bit": 40

tests/_anaconda_kdump_disable.pm

@@ -0,0 +1,24 @@
+use base "anacondatest";
+use strict;
+use testapi;
+use utils;
+use tapnet;
+
+sub run {
+    my $self = shift;
+    # Anaconda hub
+    assert_screen "anaconda_main_hub", 300; #
+
+    assert_and_click "anaconda_main_hub_kdump";
+    assert_and_click "anaconda_kdump_disable";
+    assert_screen "anaconda_kdump_disabled", 90;
+    assert_and_click "anaconda_spoke_done";
+}
+
+sub test_flags {
+    return { fatal => 1 };
+}
+
+1;
+
+# vim: set sw=4 et:

tests/_anaconda_kdump_enable.pm

@@ -0,0 +1,24 @@
+use base "anacondatest";
+use strict;
+use testapi;
+use utils;
+use tapnet;
+
+sub run {
+    my $self = shift;
+    # Anaconda hub
+    assert_screen "anaconda_main_hub", 300; #
+
+    assert_and_click "anaconda_main_hub_kdump";
+    assert_and_click "anaconda_kdump_enable";
+    assert_screen "anaconda_kdump_enabled", 90;
+    assert_and_click "anaconda_spoke_done";
+}
+
+sub test_flags {
+    return { fatal => 1 };
+}
+
+1;
+
+# vim: set sw=4 et:

tests/_anaconda_network_enable.pm

@@ -0,0 +1,25 @@
+use base "anacondatest";
+use strict;
+use testapi;
+use utils;
+use tapnet;
+
+sub run {
+    my $self = shift;
+    # Anaconda hub
+    assert_screen "anaconda_main_hub", 300; #
+
+    assert_and_click "anaconda_main_hub_network_host_name_not_connected";
+    assert_and_click "anaconda_network_connect";
+
+    assert_screen "anaconda_network_connected", 90;
+    assert_and_click "anaconda_spoke_done";
+}
+
+sub test_flags {
+    return { fatal => 1 };
+}
+
+1;
+
+# vim: set sw=4 et:

tests/_anaconda_network_static.pm

@@ -22,6 +22,7 @@ sub run {
     # set DNS from host
     type_safely join(',', get_host_dns());
     type_safely "\t\t\t\t\t\n";
+    assert_and_click "anaconda_network_connect";
     # can take a bit of time as it seems to wait for all the pending
     # DHCP requests to time out before applying the static config
     assert_screen "anaconda_network_connected", 90;

tests/disk_custom_resize_lvm.pm

@@ -56,14 +56,16 @@ sub run {
     type_very_safely "/";
     # Skip to the Size window
     send_key "tab";
-    type_very_safely "13 GiB";
+    type_very_safely "12 GiB";
     # Reformat and update the partition
     assert_and_click "anaconda_part_device_reformat";
     assert_and_click "anaconda_part_update_settings";
     # give it a second or two to update
     wait_still_screen 2;
-    # Check that the partition has been resized for 13GiB
-    assert_screen "device_root_resized_thirteen";
+    # Fedora original here as to resize to 13GiB but Rocky default / partition
+    # size is 12.5GiB and we can only resize down.
+    # Check that the partition has been resized for 12GiB
+    assert_screen "device_root_resized_twelve";
 
     # Add new /home partition into the emptied space.
     assert_and_click "anaconda_part_add";

tests/disk_custom_resize_lvm_postinstall.pm

@@ -6,7 +6,7 @@ sub run {
     assert_screen "root_console";
     # check that there is a root partition and that it has
     # the correct size -> 13G
-    assert_script_run "lsblk | grep root | grep '13G'";
+    assert_script_run "lsblk | grep root | grep '12G'";
 }
 
 sub test_flags {

tests/modularity_install_module.pm

@@ -12,7 +12,7 @@ sub run {
     # Install a Ruby module.
     my $name = "nodejs";
     my $stream = "14";
-    my $profile = "default";
+    my $profile = "common";
     assert_script_run("dnf module install -y $name:$stream/$profile");
 
     # Check that it is listed in the installed list.

tests/modularity_module_list.pm

@@ -12,34 +12,26 @@ sub run {
     # The test case will check that dnf has modular functions and that
     # it is possible to invoke modular commands to work with modularity.
 
-    # Check that modular repositories are installed and enabled.
-    # If the repository does not exist, the output of the command is empty.
-    if (lc(get_var('VERSION')) eq "rawhide") {
-        my $mrawhide_output = script_output("dnf repolist --enabled rawhide-modular");
-        die "The rawhide-modular repo seems not to be installed." unless (length $mrawhide_output);
-    }
-    else {
-        my $mfedora_output = script_output("dnf repolist --enabled fedora-modular");
-        die "The fedora-modular repo seems not to be installed." unless (length $mfedora_output);
-        my $mupdates_output = script_output("dnf repolist --enabled updates-modular");
-        die "The updates-modular repo seems not to be installed." unless (length $mupdates_output);
-    }
-
-    # Check that modularity works and dnf can list the modules.
-    my $modules = script_output('dnf module list --disablerepo=updates-modular --disablerepo=updates-testing-modular', timeout => 270);
-    my @modules = parse_module_list($modules);
-    die "The module list seems to be empty when it should not be." if (scalar @modules == 0);
-
-    # Check that modularity works and dnf can list the modules
-    # with the -all option.
-    $modules = script_output('dnf module list --all --disablerepo=updates-modular --disablerepo=updates-testing-modular', timeout => 270);
-    @modules = parse_module_list($modules);
-    die "The module list seems to be empty when it should not be." if (scalar @modules == 0);
-
     # Check that dnf lists the enabled modules.
-    $modules = script_output('dnf module list --enabled', timeout => 270);
-    @modules = parse_module_list($modules);
-    die "There seem to be enabled modules when the list should be empty." unless (scalar @modules == 0);
+    # NOTE: In Rocky the baseos and appstream default repos include and add modules in the
+    #       default installation where in Fedora all modules are in separate modular repos.
+    #       Until we figure out how to keep track of the count of expected enabled modular
+    #       packages this will need to assume what appears to be the default in minimal.
+    my $modules = script_output('dnf module list --enabled', timeout => 270);
+    my @modules = parse_module_list($modules);
+    die "Enabled modules is less than the default (3)." unless (scalar @modules < 3);
+    die "Enabled modules is greater than the default (3)." unless (scalar @modules > 3);
+
+    # More advanced... loop over default modules and check them directly. The is_listed
+    # bit comes from modularity_enable_disable_module.pm
+
+    #perl                5.26   [d][e]
+    #perl-IO-Socket-SSL  2.066  [d][e]
+    #perl-libwww-perl    6.34   [d][e]
+    #my @enabled_modules = parse_module_list($enabled);
+    #unless (is_listed($name, $stream, \@enabled_modules)) {
+    #    die "The enabled module is not listed in the list of enabled modules but it should be.";
+    #}
 
     # Check that dnf lists the disabled modules.
     $modules = script_output('dnf module list --disabled', timeout => 270);

tests/os_release.pm

@@ -33,100 +33,24 @@ sub run {
         # Now, we have all the data ready and we can start testing, first let us get
         # correct variables to compare the system data with.
         # First, we know the basic stuff
-        my $id = get_var("DISTRI"); # Should be "fedora"
-        # extract expected version components from ISO name for canned variants,
-        # which have their os-release rewritten by rpm-ostree, see:
-        # https://github.com/projectatomic/rpm-ostree/blob/master/docs/manual/treefile.md
-        # we use the ISO name because rpm-ostree uses elements from the compose
-        # ID for nightlies, but from the label for candidate composes; BUILD
-        # always gives us the compose ID, but the ISO name contains the compose
-        # ID for nightlies but the label for candidate composes, so it works for
-        # our purposes here.
-        my $isovar = get_var("ISO");
-        # Split the ISO variable at "-" and read second-to-last (release
-        # number) and last (compose ID: date and respin, label: major and
-        # minor) fields.
-        my ($cannedver, $cannednum) = (split /-/, $isovar)[-2, -1];
-        # Get rid of the ".iso" part of the tag.
-        $cannednum =~ s/\.iso//g;
-        # Now, we merge the fields into one expression to create the correct canned tag
-        # that will contain both the version number and the build number.
-        my $cannedtag = "$cannedver.$cannednum";
-        # If this is a CoreOS build, though, throw all that away and
-        # just use the build version
-        my $build = get_var("BUILD");
-        if ($build =~ /^Fedora-CoreOS/) {
-            $cannedtag = (split /-/, $build)[-1];
-        }
+        my $id = get_var("DISTRI"); # Should be "rocky"
+
         my $name = ucfirst($id);
-        # from F35 onwards, $NAME is "Fedora Linux" not just "Fedora"
-        my $relnum = get_release_number;
-        my $fullname = $relnum > 34 ? $name . " Linux" : $name;
-        my $rawrel = get_var("RAWREL", '');
-        my $version_id = get_var("VERSION"); # Should be the version number or Rawhide.
-        # IoT has a branch that acts more or less like Rawhide, but has
-        # its version as the Rawhide release number, not 'Rawhide'. This
-        # handles that
-        $version_id = 'Rawhide' if ($version_id eq $rawrel);
-        my $varstr = spell_version_number($version_id);
-        my $target = lc($version_id);
-        $version_id = $rawrel if ($version_id eq "Rawhide");
+        # $NAME is "Rocky Linux" not just "Rocky"
+        my $fullname = $name . " Linux";
 
-        # the 'generic' os-release in fedora-release has no VARIANT or
-        # VARIANT_ID and the string used in values like VERSION, that in other
-        # cases is the VARIANT, is 'Rawhide' for Rawhide and the spelt version
-        # number for other releases. These are the values we'll see for an
-        # Everything image.
-        my $variant_id = "";
-        my $variant = "generic";
+	my $version_id = get_var("VERSION"); # Should be the version number.
+	my ($ver_major, $ver_minor) = split /\./, $version_id;
+	my $varstr = spell_version_number($version_id);
+	my $target = lc($ver_major);
 
-        # now replace the values with the correct ones if we are testing a
-        # subvariant that maps to a known variant
-        my $subvariant = get_var('SUBVARIANT');
-        my %variants = (
-            Server => ["server", "Server Edition"],
-            Workstation => ["workstation", "Workstation Edition"],
-            AtomicHost => ["atomic.host", "Atomic Host"],
-            CoreOS => ["coreos", "CoreOS"],
-            KDE => ["kde", "KDE Plasma"],
-            Silverblue => ["silverblue", "Silverblue"],
-            IoT => ["iot", "IoT Edition"],
-        );
-        if (exists($variants{$subvariant})) {
-            ($variant_id, $variant) = @{$variants{$subvariant}};
-            $varstr = $variant;
-        }
+	my $reltag = script_output 'rpm -q rocky-release --qf "%{RELEASE}\n"';
+	my ($relver, $eltag) = split /\./, $reltag;
 
-        # If fedora-release-common release starts with a 0, we'll have
-        # "Prerelease" in varstr
-        my $reltag = script_output 'rpm -q fedora-release-common --qf "%{RELEASE}\n"';
-        if (index($reltag, "0.") == 0) {
-            $varstr .= " Prerelease";
-            # ...however, we shouldn't just wave this through if we're
-            # an RC candidate or update compose, those should never be
-            # done with a 0.x fedora-release-common. so let's blow up
-            # here if so. unless it's IoT, because IoT is weird
-            my $label = get_var("LABEL");
-            if ($label =~ /^(RC|Update)-/ && $subvariant ne "IoT") {
-                die "RC candidate or update compose should not have 0.x versioned fedora-release!";
-            }
-        }
-        my $version = "$version_id ($varstr)";
-        # for canned variants, we need to form a different string here by using
-        # the above created cannedtag. See earlier comment
-        if (get_var("CANNED")) {
-            $version = "$cannedtag ($varstr)";
-        }
-        my $platform_id = "platform:f$version_id";
-        my $pretty = "$fullname $version_id ($varstr)";
-        # Same problem is when testing the PRETTY_NAME.
-        if (get_var("CANNED")) {
-            $pretty = "$fullname $cannedtag ($varstr)";
-            # ...and FCOS uses a different format, sigh
-            if ($build =~ /^Fedora-CoreOS/) {
-                $pretty = "Fedora CoreOS $cannedtag";
-            }
-        }
+	my $code_name = get_var("CODENAME", 'Green Obsidian');
+        my $version = "$version_id ($code_name)";
+        my $platform_id = "platform:$eltag";
+	my $pretty = "$fullname $version_id ($code_name)";
 
         #Now. we can start testing the real values from the installed system.
         my @fails = ();
@@ -141,7 +65,8 @@ sub run {
         rec_log "VERSION should be $version and is $strip",  $strip eq $version, $failref;
 
         # Test for version_id
-        rec_log "VERSION_ID should be $version_id and is $content{'VERSION_ID'}", $content{'VERSION_ID'} eq $version_id, $failref;
+	$strip = strip_marks($content{'VERSION_ID'});
+        rec_log "VERSION_ID should be $version_id and is $strip", $strip eq $version_id, $failref;
 
         # Test for platform_id
         $strip = strip_marks($content{'PLATFORM_ID'});
@@ -151,34 +76,24 @@ sub run {
         $strip = strip_marks($content{'PRETTY_NAME'});
         rec_log "PRETTY_NAME should be $pretty and is $strip", $strip eq $pretty, $failref;
 
-        # Test for RH Bugzilla Product
-        $strip = strip_marks($content{'REDHAT_BUGZILLA_PRODUCT'});
-        rec_log "REDHAT_BUGZILLA_PRODUCT should be $name and is $strip", $strip eq $name, $failref;
+        # Test for Rocky Support Product
+        $strip = strip_marks($content{'ROCKY_SUPPORT_PRODUCT'});
+        rec_log "ROCKY_SUPPORT_PRODUCT should be $name and is $strip", $strip eq $fullname, $failref;
 
-        # Test for RH Bugzilla Product Version
-        rec_log "REDHAT_BUGZILLA_PRODUCT_VERSION should be $target and is $content{'REDHAT_BUGZILLA_PRODUCT_VERSION'}", $content{'REDHAT_BUGZILLA_PRODUCT_VERSION'} eq $target, $failref;
+        # Test for Rocky Support Product Version
+	$strip = strip_marks($content{ROCKY_SUPPORT_PRODUCT_VERSION});
+        rec_log "ROCKY_SUPPORT_PRODUCT_VERSION should be $target and is $strip", $strip eq $target, $failref;
 
-        # Test for RH Support Product
-        $strip = strip_marks($content{'REDHAT_SUPPORT_PRODUCT'});
-        rec_log "REDHAT_SUPPORT_PRODUCT should be $name and is $strip", $strip eq $name, $failref;
+	# VERSION_ID should be 8.4 and is "8.4"
+	# PLATFORM_ID should be platform: and is platform:el8
+	# ROCKY_SUPPORT_PRODUCT should be Rocky and is Rocky Linux
+	# ROCKY_SUPPORT_PRODUCT_VERSION should be  and is 8 at /var/lib/openqa/share/tests/rocky/tests/os_release.pm line 95.
 
-        # Test for RH Support Product Version
-        rec_log "REDHAT_SUPPORT_PRODUCT_VERSION should be $target and is $content{'REDHAT_SUPPORT_PRODUCT_VERSION'}", $content{'REDHAT_SUPPORT_PRODUCT_VERSION'} eq $target, $failref;
 
-        # Test for Variant but only in case of Server or Workstation
-        if ($variant ne "generic") {
-                $strip = strip_marks($content{'VARIANT'});
-                rec_log "VARIANT should be $variant and is $strip", $strip eq $variant, $failref;
 
-                # Test for VARIANT_ID
-                rec_log "VARIANT_ID should be $variant_id and is $content{'VARIANT_ID'}", $content{'VARIANT_ID'} eq $variant_id, $failref;
-        }
-        else {
-                print "VARIANT was not tested because the compose is not Workstation or Server Edition.\n";
-                print "VARIANT_ID was not tested because the compose is not Workstation or Server Edition.\n";
-        }
 
-        # Check for fails, count them, collect their messages and die if something was found.
+
+	# Check for fails, count them, collect their messages and die if something was found.
         my $failcount = scalar @fails;
         script_run "echo \"There were $failcount failures in total.\" >> /tmp/os-release.log";
         upload_logs "/tmp/os-release.log", failok=>1;

tests/rocky_release.pm

@@ -0,0 +1,36 @@
+use base "installedtest";
+use strict;
+use testapi;
+use utils;
+
+# This test checks that Rocky release is correctly described in /etc/rocky-release file.
+# The content of the file should be: "Rocky Linux release <version> (<code_name>)"
+# where "version" is a number of the current Rocky Linux version and "code_name" is the
+# code_name for the release.
+
+# At such time we are building the next release that has a new code_name we'll need
+# to decide how to implement detection in rocky_release.pm.
+
+# To maintain simplicity (at least initially) we will explicitly define our code_name
+# directly. If RAWREL is required in other tests it should be defined during POST or
+# in tests to be the same as VERSION.
+
+sub run {
+    my $self = shift;
+    # Version as defined in the VERSION variable.
+    my $expectver = get_var('VERSION');
+    # Code Name as defined in the CODENAME variable or default.
+    my $code_name = get_var('CODENAME', "Green Obsidian");
+    # Create the expected content of the release file
+    # and compare it with its real counterpart.
+    my $expected = "Rocky Linux release $expectver ($code_name)";
+    validate_script_output 'cat /etc/rocky-release', sub { $_ eq $expected };
+}
+
+sub test_flags {
+    return {always_rollback => 1};
+}
+
+1;
+
+# vim: set sw=4 et:

tests/server_cockpit_default.pm

@@ -6,6 +6,8 @@ use cockpit;
 
 sub run {
     my $self = shift;
+    assert_script_run 'dnf -y groupinstall "Headless Management"', 300;
+    assert_script_run 'systemctl enable --now cockpit.socket';
     # check cockpit appears to be enabled and running and firewall is setup
     assert_script_run 'systemctl is-enabled cockpit.socket';
     assert_script_run 'systemctl is-active cockpit.socket';