generated from sig_core/wiki-template
62 lines
2.6 KiB
Markdown
62 lines
2.6 KiB
Markdown
---
|
|
title: QA:Testcase Disk Layouts
|
|
author: Al Bowles
|
|
revision_date: 2022-07-08
|
|
rc:
|
|
prod: Rocky Linux
|
|
ver:
|
|
- 8
|
|
- 9
|
|
level: Final
|
|
---
|
|
|
|
!!! info "Associated release criterion"
|
|
This test case is associated with the [Release_Criteria#Disk Layouts](9_release_criteria.md#disk-layouts) release criterion. If you are doing release validation testing, a failure of this test case may be a breach of that release criterion.
|
|
|
|
## Description
|
|
This test case verifies successful installation to any supported partition layout using any file system or format combination.
|
|
|
|
{% include 'testing/qa_data_loss_warning.md' %}
|
|
|
|
## Setup
|
|
{% include 'testing/qa_setup_boot_to_media.md' %}
|
|
|
|
## How to test
|
|
1. Select the Installation Destination spoke.
|
|
1. Select the volumes to which the operating system should be installed.
|
|
1. Select the Custom radio button under the Storage Configuration section, then click "Done".
|
|
1. For each volume, perform these steps:
|
|
1. Choose the desired partitioning scheme from the dropdown menu. Supported options are Standard Partition, LVM, and LVM Thin Provisioning.
|
|
1. Select the "Encrypt my data" checkbox to create an encrypted filesystem.
|
|
1. Select the plus (+) button in the lower left hand corner to add a partition.
|
|
1. Define the desired mount point and volume capacity, then click "Add mount point".
|
|
1. Set the device type. Supported options are LVM, RAID, Standard Partition, and LVM Thin Provisioning.
|
|
1. If device type was set to RAID, select the RAID level. Supported options are RAID0, RAID1, RAID4, RAID5, RAID6, and RAID10.
|
|
1. Set the filesystem type. Supported options are BIOS Boot, ext2, ext3, ext4, swap, vfat, and xfs.
|
|
1. In supported cases you may choose to disable formatting of existing partitions by unchecking the Reformat checkbox.
|
|
1. When all partitions have been created, click the blue Done button in the upper left corner.
|
|
1. Review the Summary of Changes dialog, then click Accept Changes.
|
|
1. Continue the installation as normal.
|
|
|
|
## Expected Results
|
|
1. The installation should complete successfully and boot to the appropriate disk.
|
|
1. The specified filesystem type and partition scheme should be used.
|
|
1. If configured, software RAID should function as expected.
|
|
|
|
## Testing with openQA
|
|
The following openQA test suites satisfy this release criteria:
|
|
|
|
- `install_standard_partition_ext4`
|
|
- `install_custom_gui_standard_partition_ext4`
|
|
- `install_lvm_ext4`
|
|
- `install_custom_gui_lvm_ext4`
|
|
- `install_software_raid`
|
|
- `install_custom_gui_software_raid`
|
|
- `install_xfs`
|
|
- `install_custom_gui_xfs`
|
|
- `install_lvmthin`
|
|
- `install_multi`
|
|
- `install_multi_empty`
|
|
|
|
{% include 'testing/qa_testcase_bottom.md' %}
|