- updated configuration for boot-iso in templates.fif.json. NOTE: If you
provide GRUB="value" during POST you must include "ip=dhcp" along with
your custom GRUB settings.
- short circuit _anaconda_network_enable.pm to check for connection at
start of test.
- provide needle to detect connected network interface using Network
Spoke icon instead of Installation Source text.
NOTE: While not required with minimal-iso or dvd-iso flavors specifying
GRUB="ip=dhcp" will also connect the network interface at boot and
bypass _anaconda_network_enable.
tcooper confirmed on the call. Merging it.
* Extend product test commands
* Increase disk size for `install_standard_partition_ext4` because some PACKAGE_SETs are too big
* Limit the license acceptance to only run on tests which run for ISO installations
It is unfortunately not that easy to limit this to ISOs due to that the misterous
limit to HDD_1 and not `custom_resize_lvm`
* Make sure that the disk post installs run in a shell
it happens that the previous test ends in the GUI
Co-authored-by: lumarel <lumarel@users.noreply.github.com>
* remove Fedora needles we are replacing
* do not expect VNC vs Text Mode menu during text install
* Rocky has kdump which changes text mode main hub install menu
* enable network and redo software selection
* do not disable password for user
* extend timeout for install
* add needles for install_anaconda_text
* fix console_password_required needles
* Our default partitioning scheme includes swap, so omit these tests
* Remove redundant test suites
The suites removed from this commit are functionally identical to the
test suites with the same name but omitting the word "blivet".
* Add needles for custom partitioning GUI
* Replace install_blivet_lvm_ext4 with install_custom_gui_lvm_ext4
- Add subroutine for adding a partition using the "Custom" GUI
- Replace references to blivet with custom_gui in FIF template
- Define test suite for the "Custom" GUI
* syntax fix
* Needle fixes per feedback from lumarel
* Needle reorg
* Replace mouse actions with keypresses
* A few comments
* Replace blivet_standard_partition suites with custom_gui_standard_partition suites
* Rewrite XFS partitioning suite for custom-gui
* Fix filesystem for swap
* Add test suite and needles for RAID using the custom-gui partitioner
* Make raidlevel parameter less confusing
* Fix needles
* Add aarch64 to templates
* Fix _do_install_and_reboot on aarch64
On aarch64 the _do_install_and_reboot test runs the "consoletty0"
action, which has a command with the string "fedora". This causes the
command to fail with "No such file or directory". This patch changes
"fedora" to "rocky" to which allows _do_install_and_reboot to pass.
* add needles for _graphical_wait_login
* remove install_package_set_kde
* add new test suites and job group to simplify package_set testing
* modify _software_selection for pre-selected graphical-server case
* restore non-Gnome installs to package-set test suite
* add needles for Rocky cockpit_updates test suite
* modify server_cockpit_updates test for Rocky
* remove bad needle for cockpit_autoupdates
* add needles for Rocky server_cockpit_updates test suite
* package_selection needle updates
* canonicalize needles JSON and fix conflict
* updates for modularity_tests
- currently passes when _console_wait_login follows
_do_install_and_reboot
- when _graphical_wait_login is fixed for
PACKAGE_SET={graphical-server|workstation} then
modularity_module_list.pm must be validated
* All generic language updates
* Add japanese needles
* Add arabic needles
* Add french needles
* Add russian needles
* Add right-to-left needles
* More arabic needles
* More french needles
* More japanese needles
* More russian needles
* More generic/english needles
* Add license accept to setup test
Co-authored-by: lumarel <lumarel@users.noreply.github.com>
The open dialog on Silverblue (which is apparently not at all
the same thing as the open dialog on Workstation, though they
look the same) does not default to the Documents folder, so we
have to open it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
`rpm` doesn't work. I dunno off-hand how you'd install git on
ostree if it wasn't there, so let's just assume it will be.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR fixes issue #188. It adds a test suite to test basic
functionality of Evince and brings the following features:
* test scripts for various Evince functions.
* needles to support the Evince test scripts
* new template variables `TESTPATH` and `POSTINSTALL_LOAD_ALL` (see
below)
* new logic in `main.py` (see below)
The new variables and the new logic make it easier to create test
suites for post-installation tests. If TESTPATH is used, OpenQA
will take all tests mentioned in POSTINSTALL from that specified
TESTPATH. If both TESTPATH and POSTINSTALL_LOAD_ALL are used, then
OpenQA will run all tests it can find at the TESTPATH location.
If POSTINSTALL and POSTINSTALL_LOAD_ALL are set simultaneously,
then only POSTINSTALL will be taken into account and OpenQA will
only load tests mentioned there.
The power_off function in desktop_login was not really asserting/checking
whether the VM got turned off. However, os-autoinst supports checking whether
the VM is turned off via assert_shutdown. This is additionally much more useful
than using check_shutdown, which does nothing if the VM is still running.
Wait for a change when clicking the done button in root password
screen (anaconda can pause for a long time there).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I've seen some failures caused by a sort of race where both
'apply' and 'refresh' needles match at the first assertion, but
openQA "prefers" the 'refresh' match. So we click the 'refresh'
button and *immediately* check_screen for apply, which is still
visible...but by the time we go to click it, it's gone because
the refresh found something new and now it's showing "Download".
This tweak should help, because if we can 'see' both refresh and
apply at the start, we'll just go ahead and click apply, we
won't refresh. The logic becomes a little more obscure, but I'm
not sure I see a fix for that. At least until KDE's tool finally
settles down for two releases in a row and we might be able to
simplify this whole thing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It can take some time for first login of a user (especially in
KDE). Test has been failing lately on Rawhide because of this.
It seems until recently we never got a still screen when trying
to log in as Jim - so the effective wait for login to complete
was 60 seconds, 30 seconds for wait_still_screen to time out
then 30 seconds for the actual login needle assertion - but now
we are getting a blank screen for 5 seconds which satisfies
wait_still_screen almost immediately, so effective timeout for
the login process is only 35 seconds, which isn't long enough.
So let's bump the check_desktop timeout to 60 seconds.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE has made it so you need to double-click icons on the desktop
now. Unfortunately this means a clunky conditional at least until
the update goes stable. When F33 is EOL we can reduce it to
just "if kde".
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In #235 we accidentally included an entire disks.pm test that
wasn't meant to be there - the infocenter module test is the
right thing to exercise plasma-disks, there is no standalone
app, running 'disks' just gets you the KDE Partition Manager,
which we already test. So this removes that test and renames a
needle that looks like it's for that test but is actually for
the kinfocenter module, to make this clearer.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It has been noted that updates have broken podman in the past and
this is a major issue for some users. Let's create a new update
flavor and run the test in it. We'll use the server image as a
base, but it's not really a server test, so I'm giving it its own
flavor so it's not run on updates that we only want to run server
tests on, and we can schedule just this test to run on container-y
updates.
As part of this, we need to install podman before running the
test; for flavors we currently run it on we expect podman to be
preinstalled, but that's not true for the server base image.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR adds a new test that automates the above mentioned test case.
It starts the installation in text mode using the `install_text` test
case, which it interrupts using the Anaconda crash trigger.
When the crash happens, it goes through the process of reporting
the bug to Bugzilla, checks that Bugzilla sends a positive
confirmation of the action, but also performs some REST API
calls to do a proper check and then it closes the bug to clean up.
GNOME dropped the g-i-s new user mode in F34, so on a Japanese
install with user created in the installer, you don't get an
input source configured out of the box or on first boot. So
we'll just have to do it manually after booting, before we test
if it works.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Looks like the latest Rawhide got a permanent update notification
for KDE again. F34 is still around, though, so we can't just
revert to the old code, I don't think.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The 'desktop_pacakge_tool_update-kde-detected' needles and
'desktop_update_notification_systray-kde' needles are actually
matching on exactly the same thing, so drop the redundancy. We
need to have the desktop_package_tool_update tag on the older
(F33) version of this needle because on F33 we click on it to
launch the update tool in the desktop_update_graphical test; from
F34 onwards this is *not* what we want to do so the needle should
not have that tag to avoid throwing the test off. When F33 goes
EOL we can drop that tag from the needle and simplify the
destop_update_graphical test. Also add a needle for the Discover
app's 'update' icon when no updates are found.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's some cheating/sloppiness going on here, with the same tag
and sometimes same needle being used to match "LVM2 Volume Group"
and "LVM2 Logical Volume". Today this caused us to pick the thin
pool entry instead in a test, so let's just clean this up and do
it right, with separate needles for matching each thing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
A recent cups-pdf build changed the default filename for files
output by cups-pdf. We need to have the test look for the
correct filename based on the cups-pdf version.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
