- updated configuration for boot-iso in templates.fif.json. NOTE: If you
provide GRUB="value" during POST you must include "ip=dhcp" along with
your custom GRUB settings.
- short circuit _anaconda_network_enable.pm to check for connection at
start of test.
- provide needle to detect connected network interface using Network
Spoke icon instead of Installation Source text.
NOTE: While not required with minimal-iso or dvd-iso flavors specifying
GRUB="ip=dhcp" will also connect the network interface at boot and
bypass _anaconda_network_enable.
* Change identification to major releases
because the that should never change on minors
* Text got changed from connectée to connecté
* Japanse character got changed
* Filter box got realligned and looks to also have changed the font
Co-authored-by: lumarel <lumarel@users.noreply.github.com>
* remove Fedora needles we are replacing
* do not expect VNC vs Text Mode menu during text install
* Rocky has kdump which changes text mode main hub install menu
* enable network and redo software selection
* do not disable password for user
* extend timeout for install
* add needles for install_anaconda_text
* fix console_password_required needles
* Our default partitioning scheme includes swap, so omit these tests
* Remove redundant test suites
The suites removed from this commit are functionally identical to the
test suites with the same name but omitting the word "blivet".
* Add needles for custom partitioning GUI
* Replace install_blivet_lvm_ext4 with install_custom_gui_lvm_ext4
- Add subroutine for adding a partition using the "Custom" GUI
- Replace references to blivet with custom_gui in FIF template
- Define test suite for the "Custom" GUI
* syntax fix
* Needle fixes per feedback from lumarel
* Needle reorg
* Replace mouse actions with keypresses
* A few comments
* Replace blivet_standard_partition suites with custom_gui_standard_partition suites
* Rewrite XFS partitioning suite for custom-gui
* Fix filesystem for swap
* Add test suite and needles for RAID using the custom-gui partitioner
* Make raidlevel parameter less confusing
* Fix needles
* add needles for _graphical_wait_login
* remove install_package_set_kde
* add new test suites and job group to simplify package_set testing
* modify _software_selection for pre-selected graphical-server case
* restore non-Gnome installs to package-set test suite
* add needles for Rocky cockpit_updates test suite
* modify server_cockpit_updates test for Rocky
* remove bad needle for cockpit_autoupdates
* add needles for Rocky server_cockpit_updates test suite
* package_selection needle updates
* canonicalize needles JSON and fix conflict
* updates for modularity_tests
- currently passes when _console_wait_login follows
_do_install_and_reboot
- when _graphical_wait_login is fixed for
PACKAGE_SET={graphical-server|workstation} then
modularity_module_list.pm must be validated
* All generic language updates
* Add japanese needles
* Add arabic needles
* Add french needles
* Add russian needles
* Add right-to-left needles
* More arabic needles
* More french needles
* More japanese needles
* More russian needles
* More generic/english needles
* Add license accept to setup test
Co-authored-by: lumarel <lumarel@users.noreply.github.com>
* Fix Install Destination needle for already select case
* Fix Encrypt Data needle
* Fix Encryption Passphrase needle
* Correct position of the Save Passphrase needle
Co-authored-by: lumarel <lumarel@users.noreply.github.com>
The open dialog on Silverblue (which is apparently not at all
the same thing as the open dialog on Workstation, though they
look the same) does not default to the Documents folder, so we
have to open it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These all failed to match first time the test was run in
production. I guess Lukas was working from an older release.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR fixes issue #188. It adds a test suite to test basic
functionality of Evince and brings the following features:
* test scripts for various Evince functions.
* needles to support the Evince test scripts
* new template variables `TESTPATH` and `POSTINSTALL_LOAD_ALL` (see
below)
* new logic in `main.py` (see below)
The new variables and the new logic make it easier to create test
suites for post-installation tests. If TESTPATH is used, OpenQA
will take all tests mentioned in POSTINSTALL from that specified
TESTPATH. If both TESTPATH and POSTINSTALL_LOAD_ALL are used, then
OpenQA will run all tests it can find at the TESTPATH location.
If POSTINSTALL and POSTINSTALL_LOAD_ALL are set simultaneously,
then only POSTINSTALL will be taken into account and OpenQA will
only load tests mentioned there.
Recent git os-autoinst no longer downsamples screenshots as far
as it did before comparison. This makes a lot of needles where
colors have changed slightly no longer match, so they all needed
updating.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Again, to combat os-autoinst's new behaviour without adding yet
more needles. We're getting 96% match on stg.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Also delete ones for F32 and earlier. This should hopefully help
us not need to have too many needles for the newer stricter
matching.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Latest Firefox has moved the underline down slightly for some
dumb reason. This tweaks the match area to only the text, so it
matches wherever the underline is.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In #235 we accidentally included an entire disks.pm test that
wasn't meant to be there - the infocenter module test is the
right thing to exercise plasma-disks, there is no standalone
app, running 'disks' just gets you the KDE Partition Manager,
which we already test. So this removes that test and renames a
needle that looks like it's for that test but is actually for
the kinfocenter module, to make this clearer.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR adds a new test that automates the above mentioned test case.
It starts the installation in text mode using the `install_text` test
case, which it interrupts using the Anaconda crash trigger.
When the crash happens, it goes through the process of reporting
the bug to Bugzilla, checks that Bugzilla sends a positive
confirmation of the action, but also performs some REST API
calls to do a proper check and then it closes the bug to clean up.
GNOME dropped the g-i-s new user mode in F34, so on a Japanese
install with user created in the installer, you don't get an
input source configured out of the box or on first boot. So
we'll just have to do it manually after booting, before we test
if it works.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Looks like the latest Rawhide got a permanent update notification
for KDE again. F34 is still around, though, so we can't just
revert to the old code, I don't think.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The 'desktop_pacakge_tool_update-kde-detected' needles and
'desktop_update_notification_systray-kde' needles are actually
matching on exactly the same thing, so drop the redundancy. We
need to have the desktop_package_tool_update tag on the older
(F33) version of this needle because on F33 we click on it to
launch the update tool in the desktop_update_graphical test; from
F34 onwards this is *not* what we want to do so the needle should
not have that tag to avoid throwing the test off. When F33 goes
EOL we can drop that tag from the needle and simplify the
destop_update_graphical test. Also add a needle for the Discover
app's 'update' icon when no updates are found.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's some cheating/sloppiness going on here, with the same tag
and sometimes same needle being used to match "LVM2 Volume Group"
and "LVM2 Logical Volume". Today this caused us to pick the thin
pool entry instead in a test, so let's just clean this up and do
it right, with separate needles for matching each thing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The needle match seems to have changed when bug #1957858 showed
up, but it's actually just a text rendering change in the window
title, it's not exactly caused by the tiny window. So not marking
as a workaround needle.
Maximizing the window makes the test work faster when we hit that
bug, as type_safely needs to be able to see the results of its
typing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Some fixups for anaconda_help. Two runs of it failed today around
handoff from the root password screen to the install progress
screen; add a couple of wait_still_screens there to make it
safer. Drop the added nonlive needles, because they're too
permissive, causing problems for other tests (they're matching
before they should); instead we solve the problem of spokes being
highlighted by just pressing shift-tab a few times. And fix some
tabs to be spaces.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR automates the mentioned testcase to test that Help can be
displayed in Anaconda during the installation. It navigates through
the available Help screens and if it can see it, it finishes.
This test runs after `install_default_upload` to override the
installation defaults defined for all primary tests.
Delete a duplicated needle.
Reformat list extensions to make it nicer.
Get rid of wrong export and an empty line.
Delete empty line.
Use _boot_to_anaconda for booting and move subroutine accordingly.
Add variable to templates.fif.json
Delete trailing whitespace.
Fix calling the pretest.
Move help checking to another place.
Not sure why these changed, but oh well. Utilities menu was
highlighted in a test run for some reason, so let's just handle
that. Other needles changed very slightly.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're not using them, so they fail the unused needles check. We
can just revert this commit when we want them back.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The background color of the generic left bar needle has changed
to match the new logo base color. The top bar's background color
has similarly changed, but this also caused us to notice a bug
in fedora-logos - that topbar image file seems to be basically
empty (just a transparent rectangle) so we see no 'image' in the
top bar, just solid electric blue. This needle matches that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Boxes dropped VNC functionality. It's supposed to be replaced by
Connections, but we can't use that until it has fullscreen:
https://gitlab.gnome.org/GNOME/connections/-/issues/5
so use Vinagre for now. We do also prepare some needles for
Connections in anticipation of being able to use it later (since
I already did the work and don't want to waste it...)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
OK, so sometimes we have a Reboot button, sometimes a Restart
button, sometimes both, but never *always* one or the other. So
we need both needles. Sigh.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a spurious warning on the Updates page, but we don't
want to fail tests for non-related updates on that, and I've
already reported it so it should get fixed.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The 'reboot' button isn't always there in this case, it seems,
but the 'restart services' one is more likely to be. So let's
switch.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Stupid Firefox survey means the thing we usually check isn't
always on the screen. This one checks for PRIORITY.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE switched to using Noto fonts by default (and title bars seem
to be blue again), many needles need to be updated.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On current F34 we get no permanent update notification in the
notifications view, we only get a *transient* one plus the
systray icon. This tweaks things so on F34 we check both of
those things correctly, behaviour on <F34 should be unchanged.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This dialog gets cut off sometimes, it seems. That's a bug, but
we just want to handle it, because we want to quit cleanly.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE update was still often failing on #1943943, so this tries a
bit harder to work around it. We add a 'refresh' needle for KDE,
and tweak the 'retry' logic to click it if we get to that point.
Note adding the needle also changes behaviour slightly - we may
click this needle if we see it on first entering the screen. So
either change may be helping. Either way, this does make the test
more reliable.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
